# packages

pkgId: 310bd0e57416c6c85efa208859be6cb3468f3559
name: perl-Net-IP
arch: noarch
version: 1.25
epoch: 0
release: 3.fc7
summary: Perl module for manipulation of IPv4 and IPv6 addresses
url: http://search.cpan.org/dist/Net-IP/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: spud.z900.redhat.com
rpm_sourcerpm: perl-Net-IP-1.25-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Net-IP-1.25-3.fc7.noarch.rpm
checksum_type: sha
description:
  This is the Net::IP module for Perl, designed to allow easy
  manipulation of IPv4 and IPv6 addresses.  Two applications using the
  Net::IP module are included: ipcount, an IP address mini-calculator,
  it can calculate the number of IP addresses in a prefix or all the
  prefixes contained in a given range; and iptab, which prints out a
  handy IP "cheat sheet".


pkgId: 7c6925942af29e3011226e84d9b0ef7f9f44ea89
name: finger
arch: i386
version: 0.17
epoch: 0
release: 34.fc7
summary: The finger client
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: finger-0.17-34.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/finger-0.17-34.fc7.i386.rpm
checksum_type: sha
description:
  Finger is a utility which allows users to see information about system
  users (login name, home directory, name, how long they've been logged
  in to the system, etc.).  The finger package includes a standard
  finger client.

  You should install finger if you'd like to retrieve finger information
  from other systems.


pkgId: b9f2b99a8882272232739a54439a0d4ca48ab3ad
name: poppler-devel
arch: i386
version: 0.5.4
epoch: 0
release: 7.fc7
summary: Libraries and headers for poppler
url: http://poppler.freedesktop.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: poppler-0.5.4-7.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/poppler-devel-0.5.4-7.fc7.i386.rpm
checksum_type: sha
description:
  Poppler, a PDF rendering library, it's a fork of the xpdf PDF
  viewer developed by Derek Noonburg of Glyph and Cog, LLC.

  You should install the poppler-devel package if you would like to
  compile applications based on poppler.


pkgId: 49113865171626b284a2f5b24391518d4d9b1787
name: eventlog-devel
arch: i386
version: 0.2.5
epoch: 0
release: 6.fc7
summary: Syslog-ng v2 support library development files
url: http://www.balabit.com/products/syslog-ng/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: eventlog-0.2.5-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eventlog-devel-0.2.5-6.fc7.i386.rpm
checksum_type: sha
description:
  The EventLog library aims to be a replacement of the simple syslog() API
  provided on UNIX systems. The major difference between EventLog and syslog
  is that EventLog tries to add structure to messages.

  EventLog provides an interface to build, format and output an event record.
  The exact format and output method can be customized by the administrator
  via a configuration file.

  This package contains the development files.


pkgId: 01f1040e3ffcefaeedd65a456116092865618f51
name: puretls
arch: i386
version: 0.9
epoch: 0
release: 0.b5.4jpp.1
summary: Java implementation of SSLv3 and TLSv1
url: http://www.rtfm.com/puretls
rpm_license: BSD style
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries/Java
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: puretls-0.9-0.b5.4jpp.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/puretls-0.9-0.b5.4jpp.1.i386.rpm
checksum_type: sha
description:
  PureTLS is a free Java-only implementation of the SSLv3 and TLSv1
  (RFC2246) protocols. PureTLS was developed by Eric Rescorla for Claymore
  Systems, Inc, but is being distributed for free because we believe that
  basic network security is a public good and should be a commodity.


pkgId: 40619b5728d153ae265e926c729b51b79bc83eb2
name: perl-Crypt-DH
arch: noarch
version: 0.06
epoch: 0
release: 6.fc7
summary: Perl module implementing the Diffie-Hellman key exchange system
url: http://search.cpan.org/dist/Crypt-DH/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Crypt-DH-0.06-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Crypt-DH-0.06-6.fc7.noarch.rpm
checksum_type: sha
description:
  Crypt::DH is a Perl implementation of the Diffie-Hellman key exchange system.
  Diffie-Hellman is an algorithm by which two parties can agree on a shared
  secret key, known only to them. The secret is negotiated over an insecure
  network without the two parties ever passing the actual shared secret, or their
  private keys, between them.


pkgId: 3f721cbd5b64821ddb016e99acbb130ff441b037
name: hunt
arch: i386
version: 1.5
epoch: 0
release: 6.fc6
summary: Tool for demonstrating well known weaknesses in the TCP/IP protocol suite
url: http://lin.fsid.cvut.cz/~kra/index.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: hunt-1.5-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/hunt-1.5-6.fc6.i386.rpm
checksum_type: sha
description:
  Hunt is a program for intruding into a connection, watching it and
  resetting it. It was inpired by products like Juggernaut or T-sight
  but has several features which can not be found in these products.

  Note that hunt is operating on Ethernet and is best used for connections
  which can be watched through it. However, it is possible to do something
  even for hosts on another segments. The hunt doesn't distinguish between
  local network connections and connections going to/from Internet. It can
  handle all connections it sees.

  Connection hijacking is aimed primarily at the telnet traffic but it can
  be used for another traffic too.  The reset, watching, arp... features
  are common to all connections.


pkgId: ddc5d27380a0df74f7e3cabc15a6103ade92c895
name: pygpgme
arch: i386
version: 0.1
epoch: 0
release: 5.fc7
summary: Python module for working with OpenPGP messages
url: http://cheeseshop.python.org/pypi/pygpgme/0.1
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: pygpgme-0.1-5.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/pygpgme-0.1-5.fc7.i386.rpm
checksum_type: sha
description:
  PyGPGME is a Python module that lets you sign, verify, encrypt and decrypt
  files using the OpenPGP format.  It is built on top of GNU Privacy Guard and
  the GPGME library.


pkgId: 9a0902a1dc114e912d914ab01f7e010f4318589e
name: festvox-rms-arctic-hts
arch: i386
version: 0.20061229
epoch: 0
release: 1.fc7
summary: US English male speaker "RMS" for Festival
url: http://www.cstr.ed.ac.uk/projects/festival/
rpm_license: MIT-style
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: festival-1.96-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/festvox-rms-arctic-hts-0.20061229-1.fc7.i386.rpm
checksum_type: sha
description:
  US English male speaker ("RMS") voice for Festival.

  This is a HMM-based Speech Synthesis System (HTS) voice from the Nagoya
  Institute of Technology, trained using the CMU ARCTIC database. This voice
  is based on 1132 utterances spoken by a US English male speaker. The speaker
  is experienced in building synthetic voices. This was recorded at 16bit
  32KHz, in a sound proof room, in stereo, one channel was the waveform, the
  other EGG. The database was automatically labelled using EHMM an HMM labeler
  that is included in the FestVox distribution. No hand correction has been
  made.


pkgId: 5f5f31514415f8ce578aa306ff8d260b981b99bd
name: chrpath
arch: i386
version: 0.13
epoch: 0
release: 1.1.fc6
summary: Modify rpath of compiled programs
url: ftp://ftp.hungry.com/pub/hungry/chrpath/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: chrpath-0.13-1.1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/chrpath-0.13-1.1.fc6.i386.rpm
checksum_type: sha
description:
  chrpath allows you to modify the dynamic library load path (rpath) of
  compiled programs.  Currently, only removing and modifying the rpath
  is supported.


pkgId: 6b147a18cd2c8656fec08f5648607a7bc9b09cd9
name: texinfo
arch: i386
version: 4.8
epoch: 0
release: 15
summary: Tools needed to create Texinfo format documentation files
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: texinfo-4.8-15.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/texinfo-4.8-15.i386.rpm
checksum_type: sha
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  Install texinfo if you want a documentation system for producing both
  online and print documentation from the same source file and/or if you
  are going to write documentation for the GNU Project.


pkgId: 70ed4128e0a40faea6178f94385527967147a933
name: svrcore-devel
arch: i386
version: 4.0.4
epoch: 0
release: 1.fc7
summary: Development files for secure PIN handling using NSS crypto
url: http://www.mozilla.org/projects/security/pki/
rpm_license: MPL/GPL/LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: svrcore-4.0.4-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/svrcore-devel-4.0.4-1.fc7.i386.rpm
checksum_type: sha
description:
  svrcore provides applications with several ways to handle secure PIN storage
  e.g. in an application that must be restarted, but needs the PIN to unlock
  the private key and other crypto material, without user intervention.  svrcore
  uses the facilities provided by NSS.

  This package contains header files and symlinks to develop programs which will
  use the libsvrcore library.  You should install this package if you need to
  develop programs which will use the svrcore library.


pkgId: 0d8dd179342c890502e33997fe247c2c1f71cb21
name: MAKEDEV
arch: i386
version: 3.23
epoch: 0
release: 1.2
summary: A program used for creating device files in /dev.
url: http://www.lanana.org/docs/device-list/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: MAKEDEV-3.23-1.2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/MAKEDEV-3.23-1.2.i386.rpm
checksum_type: sha
description:
  This package contains the MAKEDEV program, which makes it easier to create
  and maintain the files in the /dev directory.  /dev directory files
  correspond to a particular device supported by Linux (serial or printer
  ports, scanners, sound cards, tape drives, CD-ROM drives, hard drives,
  etc.) and interface with the drivers in the kernel.

  You should install the MAKEDEV package because the MAKEDEV utility makes
  it easy to manage the /dev directory device files.


pkgId: 4ee2cb71415ed748fc4de504f3920697828a56a1
name: netgo
arch: i386
version: 0.5
epoch: 0
release: 6.fc6
summary: Networking profile manager
url: http://netgo.hjolug.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: netgo-0.5-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/netgo-0.5-6.fc6.i386.rpm
checksum_type: sha
description:
  netGo is a distribution-independent networking tool (written in Qt) for
  changing network settings quickly and easily. It is intended for laptop
  owners, who often need to change network settings when relocating.
  It allows you to create profiles that contain the network settings such as the
  IP, netmask, gateway, name servers and wireless options. After creating a
  profile it can be executed with a single click.


pkgId: 23349ea82c6801b7b30ee360d3a46e412660fd53
name: clisp
arch: i386
version: 2.41
epoch: 0
release: 3.fc7
summary: Common Lisp (ANSI CL) implementation
url: http://clisp.cons.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: clisp-2.41-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/clisp-2.41-3.fc7.i386.rpm
checksum_type: sha
description:
  ANSI Common Lisp is a high-level, general-purpose programming
  language.  GNU CLISP is a Common Lisp implementation by Bruno Haible
  of Karlsruhe University and Michael Stoll of Munich University, both
  in Germany.  It mostly supports the Lisp described in the ANSI Common
  Lisp standard.  It runs on most Unix workstations (GNU/Linux, FreeBSD,
  NetBSD, OpenBSD, Solaris, Tru64, HP-UX, BeOS, NeXTstep, IRIX, AIX and
  others) and on other systems (Windows NT/2000/XP, Windows 95/98/ME)
  and needs only 4 MB of RAM.

  It is Free Software and may be distributed under the terms of GNU GPL,
  while it is possible to distribute commercial proprietary applications
  compiled with GNU CLISP.

  The user interface comes in English, German, French, Spanish, Dutch,
  Russian and Danish, and can be changed at run time.  GNU CLISP
  includes an interpreter, a compiler, a debugger, CLOS, MOP, a foreign
  language interface, sockets, i18n, fast bignums and more.  An X11
  interface is available through CLX, Garnet, CLUE/CLIO.  GNU CLISP runs
  Maxima, ACL2 and many other Common Lisp packages.


pkgId: 3ad1900cc634a913632ccca6d14a8e4c543104ca
name: glitz-devel
arch: i386
version: 0.5.6
epoch: 0
release: 5.fc7
summary: Development files for glitz
url: http://www.freedesktop.org/Software/glitz
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: glitz-0.5.6-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/glitz-devel-0.5.6-5.fc7.i386.rpm
checksum_type: sha
description:
  The glitz-devel package contains libraries and header files for
  developing applications that use glitz.


pkgId: 78871fe8c65868bd8175fdee26ff78ab57995f06
name: GeoIP
arch: i386
version: 1.4.2
epoch: 0
release: 1.fc7
summary: C library for country/city/organization to IP address or hostname mapping
url: http://www.maxmind.com/app/c
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: GeoIP-1.4.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/GeoIP-1.4.2-1.fc7.i386.rpm
checksum_type: sha
description:
  GeoIP is a C library that enables the user to find the country that any IP
  address or hostname originates from. It uses a file based database that is
  accurate as of March 2003. This database simply contains IP blocks as keys, and
  countries as values. This database should be more complete and accurate than
  using reverse DNS lookups.


pkgId: ba1588ac3a54dac4c07384ac7f9fd0c9bdb40d05
name: libnjb-devel
arch: i386
version: 2.2.5
epoch: 0
release: 3.fc6
summary: Development files for libnjb
url: http://libnjb.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: libnjb-2.2.5-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libnjb-devel-2.2.5-3.fc6.i386.rpm
checksum_type: sha
description:
  This package provides development files for the libnjb
  library for Creative Nomad/Zen/Jukebox and Dell DJ line of MP3 players.


pkgId: 0a6cefaad41b38b0abe6a8ef6cf907d2cf5b878d
name: libast
arch: i386
version: 0.7.1
epoch: 0
release: 0.1.20060818cvs.fc7
summary: Library of Assorted Spiffy Things
url: http://www.eterm.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libast-0.7.1-0.1.20060818cvs.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libast-0.7.1-0.1.20060818cvs.fc7.i386.rpm
checksum_type: sha
description:
  LibAST is the Library of Assorted Spiffy Things.  It contains various
  handy routines and drop-in substitutes for some good-but-non-portable
  functions.  It currently has a built-in memory tracking subsystem as
  well as some debugging aids and other similar tools.

  It's not documented yet, mostly because it's not finished.  Hence the
  version number that begins with 0.


pkgId: 28bb67c1d50775d58346e713c13babc946f7c8d3
name: kismet-extras
arch: i386
version: 0.0.2007.01.R1b
epoch: 0
release: 7.fc7
summary: Non-core programs for 'kismet'
url: http://www.kismetwireless.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: kismet-0.0.2007.01.R1b-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kismet-extras-0.0.2007.01.R1b-7.fc7.i386.rpm
checksum_type: sha
description:
  Kismet is an 802.11 layer2 wireless network detector, sniffer, and
  intrusion detection system. Kismet will work with any wireless card
  which supports raw monitoring (rfmon) mode, and can sniff 802.11b,
  802.11a, and 802.11g traffic.

  This subpackage contains programs which provide additional functionality
  but introduce dependencies which are not needed for kismet to work.


pkgId: 5fcb93ea0d93f58b8e940912ded8b6bfaaa15123
name: openmpi
arch: i386
version: 1.1
epoch: 0
release: 8.fc7
summary: Open Message Passing Interface
url: http://www.open-mpi.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: openmpi-1.1-8.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/openmpi-1.1-8.fc7.i386.rpm
checksum_type: sha
description:
  Open MPI is an open source, freely available implementation of both the
  MPI-1 and MPI-2 standards, combining technologies and resources from
  several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in
  order to build the best MPI library available.  A completely new MPI-2
  compliant implementation, Open MPI offers advantages for system and
  software vendors, application developers, and computer science
  researchers. For more information, see http://www.open-mpi.org/ .


pkgId: 280d59a4796095dd4492c3801c9ab903df56980e
name: fonts-hebrew-fancy
arch: noarch
version: 0.20051122
epoch: 0
release: 2.fc7
summary: Fancy fonts for Hebrew
url: http://culmus.sourceforge.net/fancy
rpm_license: GPL
rpm_vendor: Koji
rpm_group: User Interface/X
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: fonts-hebrew-fancy-0.20051122-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/fonts-hebrew-fancy-0.20051122-2.fc7.noarch.rpm
checksum_type: sha
description:
  The fonts-hebrew-fancy package contains fancy (non-standard) Hebrew fonts
  from the Culmus project by Maxim Iorsh.


pkgId: 7a296b67fa7d586a91153249c77ec4f2b560cfa8
name: expat
arch: i386
version: 1.95.8
epoch: 0
release: 9
summary: A library for parsing XML.
url: http://www.libexpat.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: expat-1.95.8-9.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/expat-1.95.8-9.i386.rpm
checksum_type: sha
description:
  This is expat, the C library for parsing XML, written by James Clark. Expat
  is a stream oriented XML parser. This means that you register handlers with
  the parser prior to starting the parse. These handlers are called when the
  parser discovers the associated structures in the document being parsed. A
  start tag is an example of the kind of structures for which you may
  register handlers.


pkgId: 8285ede30d142cedc7e4d255d815dce096e645bf
name: nautilus-devel
arch: i386
version: 2.18.1
epoch: 0
release: 2.fc7
summary: Libraries and include files for developing nautilus extensions
url: http://www.gnome.org/projects/nautilus/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: nautilus-2.18.1-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/nautilus-devel-2.18.1-2.fc7.i386.rpm
checksum_type: sha
description:
  This package provides the necessary development libraries and headers
  for writing nautilus extensions.


pkgId: e553d4f4fc0e622d6cb263a18c315e2ef024586d
name: qwtplot3d-devel
arch: i386
version: 0.2.6
epoch: 0
release: 2.fc7
summary: Development files for qwtplot3d
url: http://qwtplot3d.sourceforge.net/
rpm_license: zlib/libpng License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: qwtplot3d-0.2.6-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qwtplot3d-devel-0.2.6-2.fc7.i386.rpm
checksum_type: sha
description:
  The qwtplot3d-devel package contains libraries and header files for
  developing applications that use qwtplot3d.


pkgId: f85083c72c7fa56b437718745086e29e7173d551
name: krusader
arch: i386
version: 1.80.0
epoch: 0
release: 0.1.beta2.fc7
summary: An advanced twin-panel (commander-style) file-manager for KDE
url: http://krusader.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/File
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: krusader-1.80.0-0.1.beta2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/krusader-1.80.0-0.1.beta2.fc7.i386.rpm
checksum_type: sha
description:
  Krusader is an advanced twin-panel (commander-style) file-manager for KDE
  (similar to Midnight or Total Commander) but with many extras.
  It provides all the file-management features you could possibly want.
  Plus: extensive archive handling, mounted filesystem support, FTP, advanced
  search module, viewer/editor, directory synchronisation, file content
  comparisons, powerful batch renaming and much much more.
  It supports the following archive formats: tar, zip, bzip2, gzip, rar, ace,
  arj and rpm and can handle other KIOSlaves such as smb:// or fish://
  It is (almost) completely customizable, very user friendly, fast and looks
  great on your desktop! :-)

  You should give it a try.


pkgId: cc4ffa68e6ff847715db90ebdf9890c98ee8ab49
name: tcp_wrappers-devel
arch: i386
version: 7.6
epoch: 0
release: 44.fc7
summary: tcp_wrappers development libraries and headers.
url: ftp://ftp.porcupine.org/pub/security/index.html
rpm_license: Distributable
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: tcp_wrappers-7.6-44.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tcp_wrappers-devel-7.6-44.fc7.i386.rpm
checksum_type: sha
description:
  tcp_wrappers-devel contains the libraries and header files needed to
  develop applications with tcp_wrappers support.


pkgId: 637d491ca487ffd89e1c1c65e072eb1ed6898a7e
name: libtomoe-gtk-devel
arch: i386
version: 0.5.1
epoch: 0
release: 2.fc7
summary: Gtk library for tomoe Japanese handwritten input
url: http://scim-imengine.sourceforge.jp/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libtomoe-gtk-0.5.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libtomoe-gtk-devel-0.5.1-2.fc7.i386.rpm
checksum_type: sha
description:
  The libtomoe-devel package includes the header files for the libtomoe-gtk.
  Install this if you want to develop programs which will use libtomoe-gtk.


pkgId: ba784e4e4cb7b3cfdcb177866dfbcba378b9ee6f
name: nqc
arch: i386
version: 3.1.4
epoch: 0
release: 6.fc7
summary: Not Quite C compiler
url: http://bricxcc.sourceforge.net/nqc/
rpm_license: MPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: nqc-3.1.4-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/nqc-3.1.4-6.fc7.i386.rpm
checksum_type: sha
description:
  Not Quite C is a simple language with a C-like syntax that can be used to
  program Lego's RCX programmable brick (from the Mindstorms set).


pkgId: 260d6d2ab72a49efe08648a75b3f862003393a4d
name: krb5-auth-dialog
arch: i386
version: 0.7
epoch: 0
release: 2
summary: Kerberos 5 authentication dialog
url: http://www.redhat.com/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: krb5-auth-dialog-0.7-2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/krb5-auth-dialog-0.7-2.i386.rpm
checksum_type: sha
description:
  This package contains a dialog that warns the user when their Kerberos
  tickets are about to expire and lets them renew them.


pkgId: 579480f1cdbe68c99ebace26cf41e8c276aaaee0
name: jpgalleg
arch: i386
version: 2.5
epoch: 0
release: 1.fc7
summary: JPEG library for the Allegro game library
url: http://www.ecplusplus.com/index.php?page=projects&pid=1
rpm_license: zlib/libpng License
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: jpgalleg-2.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jpgalleg-2.5-1.fc7.i386.rpm
checksum_type: sha
description:
  jpgalleg is a jpeg library for use with the Allegro game library. It allows
  using jpeg's as Allegro bitmaps.


pkgId: 42d5bb19cee1c7cf9bd404213cf1710e9e4537a7
name: fluxstyle
arch: noarch
version: 1.0.1
epoch: 0
release: 2.fc7
summary: A graphical style manager for Fluxbox
url: http://fluxstyle.berlios.de
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/X
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: fluxstyle-1.0.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fluxstyle-1.0.1-2.fc7.noarch.rpm
checksum_type: sha
description:
  fluxstyle is a graphical style manager for the fluxbox window manager.
  fluxstyle is written in python using pygtk and glade, you can use it
  to preview, add, remove and apply styles in fluxbox.


pkgId: e0637f7262277da41fec2c21d9aaf9863d0f1964
name: gnome-sharp-devel
arch: i386
version: 2.16.0
epoch: 0
release: 1.fc6
summary: files needed for developing with gnome-sharp
url: ftp://ftp.gnome.org/pub/gnome/sources/gnome-sharp/2.16/
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: gnome-sharp-2.16.0-1.fc6.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gnome-sharp-devel-2.16.0-1.fc6.i386.rpm
checksum_type: sha
description:
  This package provides the necessary development libraries and headers
  for writing gnome-sharp2 applications.


pkgId: 535cbdffd0058cb7fe49b26da0c08d166432b730
name: gnome-desktop
arch: i386
version: 2.18.0
epoch: 0
release: 4.fc7
summary: Package containing code shared among gnome-panel, gnome-session, nautilus, etc
url: http://www.gnome.org
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: gnome-desktop-2.18.0-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gnome-desktop-2.18.0-4.fc7.i386.rpm
checksum_type: sha
description:
  The gnome-desktop package contains an internal library
  (libgnomedesktop) used to implement some portions of the GNOME
  desktop, and also some data files and other shared components of the
  GNOME user environment.


pkgId: a73f77ae8ab8fa0be5a78fea5f8c332b405da4e5
name: perl-Sub-Identify
arch: noarch
version: 0.02
epoch: 0
release: 2.fc7
summary: Retrieve names of code references
url: http://search.cpan.org/dist/Sub-Identify/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Sub-Identify-0.02-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Sub-Identify-0.02-2.fc7.noarch.rpm
checksum_type: sha
description:
  Sub::Identify allows you to retrieve the real name of code references. For
  this, it uses perl's introspection mechanism, provided by the B module.


pkgId: 293025c7c02acc320ddb267fd29a742f270514f3
name: libgpod
arch: i386
version: 0.4.2
epoch: 0
release: 1.fc7
summary: Library to access the contents of an iPod
url: http://www.gtkpod.org/libgpod.html
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: libgpod-0.4.2-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgpod-0.4.2-1.fc7.i386.rpm
checksum_type: sha
description:
  Libgpod is a library to access the contents of an iPod. It supports playlists,
  smart playlists, playcounts, ratings, podcasts, album artwork, photos, etc.


pkgId: 86dedfb81ba95a58fda8e6bf171d647b721f99b1
name: perl-AnyData
arch: noarch
version: 0.10
epoch: 0
release: 3.fc6
summary: Easy access to data in many formats
url: http://search.cpan.org/dist/AnyData
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.phx.redhat.com
rpm_sourcerpm: perl-AnyData-0.10-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-AnyData-0.10-3.fc6.noarch.rpm
checksum_type: sha
description:
  The AnyData modules provide simple and uniform access to data from
  many sources -- perl arrays, local files, remote files retrievable via
  http or ftp -- and in many formats including flat files (CSV, Fixed
  Length, Tab Delimited, etc), standard format files (Web Logs,
  Passwd files, etc.),  structured files (XML, HTML Tables) and binary
  files with parseable headers (mp3s, jpgs, pngs, etc).

  There are two separate modules, each providing a different interface:
  AnyData.pm provides a simple tied hash interface and DBD::AnyData
  provides a DBI/SQL interface.  You can use either or both depending on
  your needs.


pkgId: 176e68392f023d9c30acddd912d6f122e682f4da
name: socat
arch: i386
version: 1.5.0.0
epoch: 0
release: 5.fc7
summary: Bidirectional data relay between two data channels ('netcat++')
url: http://www.dest-unreach.org/socat
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: socat-1.5.0.0-5.fc7.src.rpm
location_href: Fedora/socat-1.5.0.0-5.fc7.i386.rpm
checksum_type: sha
description:
  Socat is a relay for bidirectional data transfer between two independent data
  channels. Each of these data channels may be a file, pipe, device (serial line
  etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an
  SSL socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU
  line editor (readline), a program, or a combination of two of these.


pkgId: 6e14c3b67385c5e28283c65cb58aef7f5b8995b6
name: ginac
arch: i386
version: 1.3.6
epoch: 0
release: 1.fc7
summary: C++ library for symbolic calculations
url: http://www.ginac.de/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: ginac-1.3.6-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ginac-1.3.6-1.fc7.i386.rpm
checksum_type: sha
description:
  GiNaC (which stands for "GiNaC is Not a CAS (Computer Algebra System)") is an
  open framework for symbolic computation within the C++ programming language.


pkgId: b79c6acd7f69077da10f335ea613c338baf818f2
name: libogg-devel
arch: i386
version: 1.1.3
epoch: 2
release: 3.fc7
summary: Files needed for development using libogg
url: http://www.xiph.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: libogg-1.1.3-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libogg-devel-1.1.3-3.fc7.i386.rpm
checksum_type: sha
description:
  Libogg is a library used for manipulating Ogg bitstreams. The
  libogg-devel package contains the header files and documentation
  needed for development using libogg.


pkgId: ddaa87a57dab721f1fb17f68f5d1ad7a70e2ffe2
name: festival-speechtools-libs
arch: i386
version: 1.2.96
epoch: 0
release: 1.fc7
summary: The Edinburgh Speech Tools libraries
url: http://www.cstr.ed.ac.uk/projects/festival/
rpm_license: MIT-style
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: festival-1.96-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/festival-speechtools-libs-1.2.96-1.fc7.i386.rpm
checksum_type: sha
description:
  The Edinburgh Speech Tools libraries, used by the Festival text-to-speech
  and speech synthesis system.


pkgId: bebfb93f0b9dfa0f76cd4e75b43dd8d0debd763b
name: libyaz
arch: i386
version: 2.1.54
epoch: 0
release: 1.fc7
summary: Z39.50 libraries
url: http://www.indexdata.dk/yaz/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: yaz-2.1.54-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libyaz-2.1.54-1.fc7.i386.rpm
checksum_type: sha
description:
  Z39.50 is a client server protocol for searching and retrieving
  information from remote computer databases (ANSI/NISO Z39.50
  protocol).


pkgId: 163cf53e14d69aaeac27c1454e2619dbd90da714
name: tenr-de-styles-pkg
arch: noarch
version: 1.1
epoch: 0
release: 1.fc7
summary: A collection of styles for fluxbox
url: http://tenr.de
rpm_license: Creative Commons Attribution-ShareAlike 2.5
rpm_vendor: Fedora Project
rpm_group: Amusements/Graphics
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: tenr-de-styles-pkg-1.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tenr-de-styles-pkg-1.1-1.fc7.noarch.rpm
checksum_type: sha
description:
  A collection of styles/themes for use with Fluxbox. All styles/themes are
  compatible with fluxStyle.


pkgId: 4725160f02c86e1efec8b5587c0790fb2db82402
name: iptables-ipv6
arch: i386
version: 1.3.7
epoch: 0
release: 2
summary: IPv6 support for iptables.
url: http://www.netfilter.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: iptables-1.3.7-2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/iptables-ipv6-1.3.7-2.i386.rpm
checksum_type: sha
description:
  The iptables package contains IPv6 (the next version of the IP
  protocol) support for iptables. Iptables controls the Linux kernel
  network packet filtering code, allowing you to set up firewalls and IP
  masquerading.

  Install iptables-ipv6 if you need to set up firewalling for your
  network and you are using ipv6.


pkgId: 4f40154737cfa82e61f9e1581cea550bbab8deab
name: asciidoc
arch: noarch
version: 8.1.0
epoch: 0
release: 1.fc7
summary: Text based document generation
url: http://www.methods.co.nz/asciidoc/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: asciidoc-8.1.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/asciidoc-8.1.0-1.fc7.noarch.rpm
checksum_type: sha
description:
  AsciiDoc is a text document format for writing short documents,
  articles, books and UNIX man pages. AsciiDoc files can be translated
  to HTML and DocBook markups using the asciidoc(1) command.


pkgId: d4c8c363f066551652c105937b3ab5ca8ae861b9
name: arpwatch
arch: i386
version: 2.1a15
epoch: 14
release: 3.fc7
summary: Network monitoring tools for tracking IP addresses on a network
url: http://ee.lbl.gov/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: arpwatch-2.1a15-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/arpwatch-2.1a15-3.fc7.i386.rpm
checksum_type: sha
description:
  The arpwatch package contains arpwatch and arpsnmp.  Arpwatch and
  arpsnmp are both network monitoring tools.  Both utilities monitor
  Ethernet or FDDI network traffic and build databases of Ethernet/IP
  address pairs, and can report certain changes via email.

  Install the arpwatch package if you need networking monitoring devices
  which will automatically keep track of the IP addresses on your
  network.


pkgId: def35da2dc65153a29f73419efcaac0bbe1dfc92
name: muine
arch: i386
version: 0.8.7
epoch: 0
release: 3.fc7
summary: Music Player for GNOME
url: http://www.muine-player.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: muine-0.8.7-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/muine-0.8.7-3.fc7.i386.rpm
checksum_type: sha
description:
  Muine is a new music player for GNOME using some new UI ideas.
  The idea is that it will be much easier and comfortable
  to use than the iTunes model, which is used by most
  GNOME music players. It is written in C and C#,
  using GStreamer for music playback.


pkgId: f1c36125790f21dbcdd5d8ac25fd6b507417f1ed
name: fontconfig
arch: i386
version: 2.4.2
epoch: 0
release: 3.fc7
summary: Font configuration and customization library
url: http://fontconfig.org
rpm_license: MIT
rpm_vendor: Koji
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: fontconfig-2.4.2-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/fontconfig-2.4.2-3.fc7.i386.rpm
checksum_type: sha
description:
  Fontconfig is designed to locate fonts within the
  system and select them according to requirements specified by
  applications.


pkgId: e967eb44dd7bf54e77fc3f6b1ad3df5c4f9dad43
name: ecl
arch: i386
version: 0.9i
epoch: 0
release: 3.fc6
summary: Embeddable Common-Lisp
url: http://ecls.sourceforge.net
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: ecl-0.9i-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ecl-0.9i-3.fc6.i386.rpm
checksum_type: sha
description:
  ECL (Embeddable Common-Lisp) is an interpreter of the Common-Lisp
  language as described in the X3J13 Ansi specification, featuring CLOS
  (Common-Lisp Object System), conditions, loops, etc, plus a translator
  to C, which can produce standalone executables.


pkgId: 9a9ec474a2e1db076a1e957328fa483411fc674d
name: dap-hdf4_handler
arch: i386
version: 3.7.2
epoch: 0
release: 4.fc7
summary: HDF4 data handler for the OPeNDAP Data server
url: http://www.opendap.org/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: dap-hdf4_handler-3.7.2-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dap-hdf4_handler-3.7.2-4.fc7.i386.rpm
checksum_type: sha
description:
  This is the hdf4 data handler for our data server. It reads HDF4 and HDF-EOS
  files and returns DAP responses that are compatible with DAP2 and the
  dap-server software.


pkgId: 6cb65670fa18735c4d75e09e03b521db17ba80f8
name: dialog-devel
arch: i386
version: 1.1
epoch: 0
release: 1.20070227svn.fc7
summary: Development files for building applications with the dialog library
url: http://invisible-island.net/dialog/dialog.html
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: dialog-1.1-1.20070227svn.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dialog-devel-1.1-1.20070227svn.fc7.i386.rpm
checksum_type: sha
description:
  Dialog is a utility that allows you to show dialog boxes (containing
  questions or messages) in TTY (text mode) interfaces. This package
  contains the files needed for developing applications, which use the
  dialog library.


pkgId: 411826803d4a63b40eef9593ae05ae71bdbc3f1f
name: tetex-xdvi
arch: i386
version: 3.0
epoch: 0
release: 39.fc7
summary: An X viewer for DVI files.
url: http://www.tug.org/teTeX/
rpm_license: distributable
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: tetex-3.0-39.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tetex-xdvi-3.0-39.fc7.i386.rpm
checksum_type: sha
description:
  Xdvi allows you to preview the TeX text formatting system's output
  .dvi files on an X Window System.

  If you are installing tetex and you use PlainTeX or you are using DVI files,
  you will also need to install tetex-xdvi which allows you to view DVI files.
  Consider installing tetex-dvips (for converting .dvi files to PostScript format
  for printing on PostScript printers), and tetex-latex (a higher level formatting
  package which provides an easier-to-use interface for TeX). If you are
  not a TeX expert, you will probably also want to install the tetex-doc
  package, which contains documentation for the TeX text formatting
  system.


pkgId: 09da5552cb80be5d7464fd1df5ef2cbb6fef9db0
name: python-kaa-metadata
arch: i386
version: 0.6.1
epoch: 0
release: 4.fc7
summary: The Kaa Media - metadata binding for python
url: http://www.freevo.org/kaa
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: python-kaa-metadata-0.6.1-4.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/python-kaa-metadata-0.6.1-4.fc7.i386.rpm
checksum_type: sha
description:
  The Kaa Media Repository is a set of python modules related to media.

  Kaa modules are based on parts from Freevo and modules created for MeBox.
  Kaa exists to encourage code sharing between these projects, and to serve as
  an umbrella for several previously disparate media-related modules in order
  to make them available from one (unique) namespace. Kaa provides a base module
  that implements the common features needed for application development, such as
  mainloop management, timers, signals, callbacks, file descriptor monitors, etc.
  Kaa's other modules provide specific media-related functionality, such as
  retrieving metadata on arbitrary media files (kaa.metadata, previously
  called mmpython), Python wrappers for Imlib2, Xine, and Evas, and many other
  high level APIs for easily creating applications that deal with video and
  audio.

  Kaa is named after the python in the Jungle Book by Rudyard Kipling.


pkgId: 09bd713c7c61f7ca4f42290c4e94fd6cc2cccb06
name: ftp
arch: i386
version: 0.17
epoch: 0
release: 40.fc7
summary: The standard UNIX FTP (File Transfer Protocol) client
url: ftp://ftp.uk.linux.org/pub/linux/Networking/netkit
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: ftp-0.17-40.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ftp-0.17-40.fc7.i386.rpm
checksum_type: sha
description:
  The ftp package provides the standard UNIX command-line FTP (File
  Transfer Protocol) client.  FTP is a widely used protocol for
  transferring files over the Internet and for archiving files.

  If your system is on a network, you should install ftp in order to do
  file transfers.


pkgId: f4156a0e6be36d257f29bc23377847ae13744b37
name: tclxml-expat
arch: i386
version: 3.1
epoch: 0
release: 11.fc7
summary: The Tcl xml parser built with the expat xml parser
url: http://tclxml.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tclxml-3.1-11.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tclxml-expat-3.1-11.fc7.i386.rpm
checksum_type: sha
description:
  TclXML is a package that provides optimized XML parsing for the Tcl
  scripting language.  This implementation is built against the expat XML
  parser.


pkgId: 3e31f8d928f2f2c8de557e94eb0fdcc0190b3ebe
name: tcd-utils
arch: i386
version: 20061127
epoch: 0
release: 1.fc7.1
summary: TCD (Tide Constituent Database) Utils
url: http://www.flaterco.com/xtide/
rpm_license: Public Domain
rpm_vendor: Koji
rpm_group: Applications/Engineering
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: tcd-utils-20061127-1.fc7.1.src.rpm
rpm_packager: Koji
location_href: Fedora/tcd-utils-20061127-1.fc7.1.i386.rpm
checksum_type: sha
description:
  TCD Utils includes:
  * build_tide_db to convert harmonics.txt, offsets.xml, and NAVO
    formats to harmonics.tcd;
  * restore_tide_db to generate harmonics.txt and offsets.xml from
    harmonics.tcd


pkgId: 79653c59d6d7b4bb258512ea11aa6f6a5b5de1c2
name: torque-scheduler
arch: i386
version: 2.1.8
epoch: 0
release: 1.fc7
summary: Simple fifo scheduler for TORQUE
url: http://www.clusterresources.com/products/torque/
rpm_license: Freely redistributable (See PBS_License.txt)
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: torque-2.1.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/torque-scheduler-2.1.8-1.fc7.i386.rpm
checksum_type: sha
description:
  TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
  manager providing control over batch jobs and distributed compute nodes.
  TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
  fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
  the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
  other leading edge HPC organizations.

  This build was configured with:
    --with-default-server=localhost
    --with-tcl --with-tk
    --enable-gui
    --with-rcp=/usr/bin/scp
  This package holds the fifo C scheduler.


pkgId: fe82838fa0672f6ee2e0cd2174cf5302477a49dc
name: aterm
arch: i386
version: 1.0.0
epoch: 0
release: 7.fc7
summary: Afterstep XVT, VT102 emulator for the X Window system
url: http://aterm.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/X
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: aterm-1.0.0-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/aterm-1.0.0-7.fc7.i386.rpm
checksum_type: sha
description:
  aterm, version 1.00 is a colour vt102 terminal emulator, based on
  rxvt 2.4.8 with Alfredo Kojima´s additions of fast transparency,
  intended as an xterm(1) replacement for users who do not require fea-
  tures such as Tektronix 4014 emulation and toolkit-style configurabil-
  ity. As a result, aterm uses much less swap space -- a significant
  advantage on a machine serving many X sessions.


pkgId: 92ecc76b90d35823c4672530a8873beeea519178
name: expectk
arch: i386
version: 5.43.0
epoch: 0
release: 8
summary: A program-script interaction and testing utility
url: http://expect.nist.gov/
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: expect-5.43.0-8.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/expectk-5.43.0-8.i386.rpm
checksum_type: sha
description:
  Expect is a tcl application for automating and testing
  interactive applications such as telnet, ftp, passwd, fsck,
  rlogin, tip, etc. Expect makes it easy for a script to
  control another program and interact with it.

  This package contains expectk and some scripts that use it.


pkgId: 84518e1bbe44ac2b28b853557ecc4af4b63c13a1
name: python-louie
arch: noarch
version: 1.1
epoch: 0
release: 1.fc7
summary: Dispatches signals between Python objects in a wide variety of contexts
url: http://pylouie.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: python-louie-1.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-louie-1.1-1.fc7.noarch.rpm
checksum_type: sha
description:
  Louie provides Python programmers with a straightforward way to dispatch
  signals between objects in a wide variety of contexts. It is based on
  PyDispatcher, which in turn was based on a highly-rated recipe in the
  Python Cookbook.


pkgId: 75e4af36cf81a0974e9b36361675079d2765f758
name: tclxml-libxml2
arch: i386
version: 3.1
epoch: 0
release: 11.fc7
summary: The Tcl xml parser built with the libxml2 xml parser
url: http://tclxml.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tclxml-3.1-11.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tclxml-libxml2-3.1-11.fc7.i386.rpm
checksum_type: sha
description:
  TclXML is a package that provides optimized XML parsing for the Tcl
  scripting language.  This implementation is built against the libxml2
  xml parser.


pkgId: ce34e82641f6b0c396e9b4def89ababb25514a05
name: vorbis-tools
arch: i386
version: 1.1.1.svn20070412
epoch: 1
release: 2.fc7
summary: The Vorbis General Audio Compression Codec tools.
url: http://www.xiph.org/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Multimedia
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: vorbis-tools-1.1.1.svn20070412-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/vorbis-tools-1.1.1.svn20070412-2.fc7.i386.rpm
checksum_type: sha
description:
  Ogg Vorbis is a fully open, non-proprietary, patent- and royalty-free,
  general-purpose compressed audio format for audio and music at fixed
  and variable bitrates from 16 to 128 kbps/channel.

  The vorbis package contains an encoder, a decoder, a playback tool, and a
  comment editor.


pkgId: cda221cf4d51f54fe9baec61911e15bd7a5e13b8
name: eds-feed
arch: i386
version: 0.5.0
epoch: 0
release: 6.fc7
summary: Evolution Data Server feed for Galago
url: http://www.galago-project.org/news/index.php
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: eds-feed-0.5.0-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eds-feed-0.5.0-6.fc7.i386.rpm
checksum_type: sha
description:
  A feed for Galago that uses contact entries in the Evolution address book
  to link people and accounts.


pkgId: 4d25541bca6ba461324b63f44c62fab0b9ae44fc
name: perl-Class-MakeMethods
arch: noarch
version: 1.01
epoch: 0
release: 2.fc6
summary: Generate common types of methods
url: http://search.cpan.org/dist/Class-MakeMethods
rpm_license: Artistic or GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: perl-Class-MakeMethods-1.01-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Class-MakeMethods-1.01-2.fc6.noarch.rpm
checksum_type: sha
description:
  The Class::MakeMethods framework allows Perl class developers to quickly
  define common types of methods. When a module uses Class::MakeMethods or one
  of its subclasses, it can select from a variety of supported method types, and
  specify a name for each method desired. The methods are dynamically generated
  and installed in the calling package.

  Construction of the individual methods is handled by subclasses. This
  delegation approach allows for a wide variety of method-generation techniques
  to be supported, each by a different subclass. Subclasses can also be added to
  provide support for new types of methods.

  Over a dozen subclasses are available, including implementations of a variety
  of different method-generation techniques. Each subclass generates several
  types of methods, with some supporting their own open-eneded extension syntax,
  for hundreds of possible combinations of method types.


pkgId: ae26585b43dc995f6c51ababb81816cc511dddfe
name: limph-hostagent
arch: noarch
version: 1.9.4
epoch: 0
release: 7.fc7
summary: A host agent for Limph, the network monitor
url: http://doc.jcomserv.net/index.php/Limph
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: limph-1.9.4-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/limph-hostagent-1.9.4-7.fc7.noarch.rpm
checksum_type: sha
description:
  The Limph host agent to collect disk space and system load
  information and send it to the server running the main Limph application.


pkgId: 3d4fc421ba9e6ff4f80e681f587852d5113450fb
name: python-xlib-doc
arch: noarch
version: 0.13
epoch: 0
release: 3.fc7
summary: Documentation and examples for python-xlib
url: http://python-xlib.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Documentation
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: python-xlib-0.13-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-xlib-doc-0.13-3.fc7.noarch.rpm
checksum_type: sha
description:
  Install this package if you want the developers' documentation and examples
  that tell you how to program with python-xlib.


pkgId: 44955306c4b3654fc4c6a0225c7711cd3c9116f5
name: pptp
arch: i386
version: 1.7.1
epoch: 0
release: 2.fc6
summary: Point-to-Point Tunneling Protocol (PPTP) Client
url: http://pptpclient.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: pptp-1.7.1-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pptp-1.7.1-2.fc6.i386.rpm
checksum_type: sha
description:
  Client for the proprietary Microsoft Point-to-Point Tunneling
  Protocol, PPTP.  Allows connection to a PPTP based VPN as used
  by employers and some cable and ADSL service providers.


pkgId: 95307c7da687aa423a2ceaa69918891c38ef0060
name: unzip
arch: i386
version: 5.52
epoch: 0
release: 4.fc7
summary: A utility for unpacking zip files
url: http://www.info-zip.org/pub/infozip/UnZip.html
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Archiving
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: unzip-5.52-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/unzip-5.52-4.fc7.i386.rpm
checksum_type: sha
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: b7008fa8bd17c5d181c70a03b26dc80d0afebc81
name: opal
arch: i386
version: 2.2.8
epoch: 0
release: 1.fc7
summary: Open Phone Abstraction Library
url: http://www.openh323.org/
rpm_license: MPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: opal-2.2.8-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/opal-2.2.8-1.fc7.i386.rpm
checksum_type: sha
description:
  Open Phone Abstraction Library, implementation of the ITU H.323
  teleconferencing protocol, and successor of the openh323 library.


pkgId: 6294687b138b236accaeae7abab2bc5be452c21c
name: claws-mail-plugins-newmail
arch: i386
version: 2.9.1
epoch: 0
release: 1.fc7
summary: Write a msg header summary to a log file
url: http://claws-mail.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: claws-mail-plugins-2.9.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/claws-mail-plugins-newmail-2.9.1-1.fc7.i386.rpm
checksum_type: sha
description:
  Write a msg header summary to a log file (defaults to ~/Mail/NewLog) an arrival
  of new mail *after* sorting.


pkgId: aa65fa3c12055511b77105fc52748d66dc7624b7
name: nautilus-sendto
arch: i386
version: 0.10
epoch: 0
release: 4.fc7
summary: Nautilus context menu for sending files
url: ftp://ftp.gnome.org/pub/gnome/sources/nautilus-sendto
rpm_license: GPL
rpm_vendor: Koji
rpm_group: User Interface/Desktops
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: nautilus-sendto-0.10-4.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/nautilus-sendto-0.10-4.fc7.i386.rpm
checksum_type: sha
description:
  The nautilus-sendto package provides a Nautilus context menu for
  sending files via other desktop applications.  These functions are
  implemented as plugins, so nautilus-sendto can be extended with
  additional features.  This package provides a default plugin for
  Evolution integration.


pkgId: cdc1ddbffa384dd456c1114c5fa002707748d7b5
name: graphviz
arch: i386
version: 2.12
epoch: 0
release: 7.fc7
summary: Graph Visualization Tools
url: http://www.graphviz.org/
rpm_license: CPL
rpm_vendor: Koji
rpm_group: Applications/Multimedia
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: graphviz-2.12-7.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/graphviz-2.12-7.fc7.i386.rpm
checksum_type: sha
description:
  A collection of tools for the manipulation and layout
  of graphs (as in nodes and edges, not as in barcharts).


pkgId: 42d9544515fac281ee5bf90cabe47860fdb3aa7f
name: perl-Net-SSLeay
arch: i386
version: 1.30
epoch: 0
release: 4.fc6
summary: Perl extension for using OpenSSL
url: http://search.cpan.org/dist/Net_SSLeay.pm/
rpm_license: BSDish
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: perl-Net-SSLeay-1.30-4.fc6.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Net-SSLeay-1.30-4.fc6.i386.rpm
checksum_type: sha
description:
  This module offers some high level convinience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL api of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: 2839f7c0a8572bd555c26e119fc653fec8fec8f3
name: crystal-stacker
arch: i386
version: 1.5
epoch: 0
release: 3.fc6
summary: Falling blocks, match 3 or more of the same color crystals
url: http://www.t3-i.com/cstacker.htm
rpm_license: Freeware
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: crystal-stacker-1.5-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/crystal-stacker-1.5-3.fc6.i386.rpm
checksum_type: sha
description:
  If you've played Columns then you know what Crystal Stacker is all about. Match
  3 or more of the same color crystals either horizontally, vertically, or dia-
  gonally to destroy them. For every 45 crystals you destroy, the level increases
  and the crystals fall faster. The higher the level, the more points you are
  awarded for destroying crystals.


pkgId: 96468c7fec6b5ef2223482472df2b1dd9a5da5f1
name: subversion-devel
arch: i386
version: 1.4.3
epoch: 0
release: 4
summary: Development package for the Subversion libraries
url: http://subversion.tigris.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: subversion-1.4.3-4.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/subversion-devel-1.4.3-4.i386.rpm
checksum_type: sha
description:
  The subversion-devel package includes the static libraries and
  include files for developers interacting with the subversion
  package.


pkgId: 7f5aba3368df42e069b61df1d01ba1453bb3fa74
name: perl-POE-Component-Server-HTTP
arch: noarch
version: 0.09
epoch: 0
release: 3.fc6
summary: Foundation of a POE HTTP Daemon
url: http://search.cpan.org/dist/POE-Component-Server-HTTP/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.phx.redhat.com
rpm_sourcerpm: perl-POE-Component-Server-HTTP-0.09-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-POE-Component-Server-HTTP-0.09-3.fc6.noarch.rpm
checksum_type: sha
description:
  POE::Component::Server::HTTP (PoCo::HTTPD) is a framework for building
  custom HTTP servers based on POE. It is loosely modeled on the ideas of
  apache and the mod_perl/Apache module.


pkgId: 56cedcadc432e1fd44eb9b6ea88b3116c31578c9
name: perl-LDAP
arch: noarch
version: 0.34
epoch: 1
release: 3.fc7
summary: LDAP Perl module
url: http://search.cpan.org/dist/perl-ldap/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ia64-2.build.redhat.com
rpm_sourcerpm: perl-LDAP-0.34-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-LDAP-0.34-3.fc7.noarch.rpm
checksum_type: sha
description:
  Net::LDAP is a collection of modules that implements a LDAP services API
  for Perl programs. The module may be used to search directories or perform
  maintenance functions such as adding, deleting or modifying entries.


pkgId: 5d788d503d59fdc5d83cfdbd358b419847ed01df
name: ocaml-SDL
arch: i386
version: 0.7.2
epoch: 0
release: 7.fc7
summary: OCaml bindings for SDL
url: http://ocamlsdl.sourceforge.net
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: ocaml-SDL-0.7.2-7.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/ocaml-SDL-0.7.2-7.fc7.i386.rpm
checksum_type: sha
description:
  Runtime libraries to allow programs written in OCaml to write to SDL
  (Simple DirectMedia Layer) interfaces.


pkgId: 510049a53585a13df6e4eca3ea4c52d62e1e66ad
name: lirc-doc
arch: i386
version: 0.8.1
epoch: 0
release: 1.fc7
summary: LIRC documentation
url: http://www.lirc.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Documentation
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: lirc-0.8.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lirc-doc-0.8.1-1.fc7.i386.rpm
checksum_type: sha
description:
  LIRC is a package that allows you to decode and send infra-red and
  other signals of many (but not all) commonly used remote controls.
  Included applications include daemons which decode the received
  signals as well as user space applications which allow controlling a
  computer with a remote control.  This package contains LIRC
  documentation and a collection of remote control configuration files.


pkgId: 104e8ecd9d0a647d721ddf76fd49b2b9523e258d
name: xorg-x11-fonts-syriac
arch: noarch
version: 7.1
epoch: 0
release: 3.fc7
summary: Syriac TrueType fonts by Beth Mardutho
url: http://www.x.org
rpm_license: Various licenses
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: hitachi-1.build.redhat.com
rpm_sourcerpm: xorg-x11-fonts-7.1-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xorg-x11-fonts-syriac-7.1-3.fc7.noarch.rpm
checksum_type: sha
description:
  A collection of Syriac truetype fonts from Beth Mardutho, which are part
  of the core X Window System distribution.


pkgId: 63f1081db81b5bc7d5ed6dcdc2e86653958d64ec
name: perl-SVK
arch: noarch
version: 1.08
epoch: 0
release: 5.fc6
summary: A Distributed Version Control System
url: http://search.cpan.org/dist/SVK/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.phx.redhat.com
rpm_sourcerpm: perl-SVK-1.08-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-SVK-1.08-5.fc6.noarch.rpm
checksum_type: sha
description:
  SVK is a decentralized version control system written in Perl. It uses
  the Subversion filesystem but provides additional features:

      * Offline operations like checkin, log, merge.
      * Distributed branches.
      * Lightweight checkout copy management (no .svn directories).
      * Advanced merge algorithms, like star-merge and cherry picking.

  For more information about the SVK project, visit http://svk.elixus.org/.


pkgId: b6e1c969526500fd9da0f20297d65010dc73058e
name: cdparanoia
arch: i386
version: alpha9.8
epoch: 0
release: 27.2
summary: A Compact Disc Digital Audio (CDDA) extraction tool (or ripper).
url: http://www.xiph.org/paranoia/index.html
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: cdparanoia-alpha9.8-27.2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/cdparanoia-alpha9.8-27.2.i386.rpm
checksum_type: sha
description:
  Cdparanoia (Paranoia III) reads digital audio directly from a CD, then
  writes the data to a file or pipe in WAV, AIFC or raw 16 bit linear
  PCM format.  Cdparanoia doesn't contain any extra features (like the ones
  included in the cdda2wav sampling utility).  Instead, cdparanoia's strength
  lies in its ability to handle a variety of hardware, including inexpensive
  drives prone to misalignment, frame jitter and loss of streaming during
  atomic reads.  Cdparanoia is also good at reading and repairing data from
  damaged CDs.


pkgId: 3007fd8f5e58038f53f14c3a5d0470bffbd7ecf4
name: perl-ExtUtils-XSBuilder
arch: noarch
version: 0.28
epoch: 0
release: 2.fc6
summary: Modules that parse C header files and create XS glue code
url: http://search.cpan.org/dist/ExtUtils-XSBuilder/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.phx.redhat.com
rpm_sourcerpm: perl-ExtUtils-XSBuilder-0.28-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-ExtUtils-XSBuilder-0.28-2.fc6.noarch.rpm
checksum_type: sha
description:
  ExtUtils::XSBuilder is a set of modules to parse C header files and create
  XS glue code and documentation out of it. Ideally this allows one to "write"
  an interface to a C library without coding a line. Since no C-API is ideal,
  some adjuments are necessary most of the time. So to use this module you
  must still be familiar with C and XS programming, but it removes a lot of
  stupid work and copy&paste from you. Also when the C API changes, most
  of the time you only have to rerun XSBuilder to get your new Perl API.


pkgId: 1cc59310ce5ed3e1a2bce435d4ab3cfc9ab8c8c8
name: inadyn
arch: i386
version: 1.96
epoch: 0
release: 3.fc6
summary: Dynamic DNS Client
url: http://inadyn.ina-tech.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: inadyn-1.96-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/inadyn-1.96-3.fc6.i386.rpm
checksum_type: sha
description:
  INADYN is a dynamic DNS client. It maintains the IP address of a
  host name. It periodically checks wheather the IP address stored
  by the DSN server is the real current address of the machine that
  is running INADYN.

  Before using inadyn for the first time you must use the DynDNS
  provider's web interface to create the entry for the hostname. You
  should then fill in /etc/inadyn.conf with the appropriate detail


pkgId: 5fcc2b42aa6e4e5c883a430aca062c3954ca513e
name: libextractor-plugins
arch: i386
version: 0.5.17a
epoch: 0
release: 1.fc7
summary: Plugins for libextractor
url: http://gnunet.org/libextractor/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libextractor-0.5.17a-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libextractor-plugins-0.5.17a-1.fc7.i386.rpm
checksum_type: sha
description:
  libextractor is a simple library for keyword extraction.  libextractor
  does not support all formats but supports a simple plugging mechanism
  such that you can quickly add extractors for additional formats, even
  without recompiling libextractor.

  This is a metapackage which requires all supported plugins for
  libextractor.


pkgId: 12899d8720fa91fda75d2b6940492e661bdf24d3
name: libmatroska-devel
arch: i386
version: 0.8.1
epoch: 0
release: 1.fc7
summary: Matroska container format library development files
url: http://www.matroska.org/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: libmatroska-0.8.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libmatroska-devel-0.8.1-1.fc7.i386.rpm
checksum_type: sha
description:
  Matroska is an extensible open standard Audio/Video container.  It
  aims to become THE standard of multimedia container formats.  Matroska
  is usually found as .mkv files (matroska video) and .mka files
  (matroska audio).

  This package contains the files required to rebuild applications which
  will use the Matroska container format.


pkgId: cab994bc349161d3b5b22bf7341665a9695060e8
name: bittorrent
arch: noarch
version: 4.4.0
epoch: 0
release: 5.fc7
summary: BitTorrent swarming network file transfer tool
url: http://www.bittorrent.com/
rpm_license: BitTorrent Open Source License
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: bittorrent-4.4.0-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/bittorrent-4.4.0-5.fc7.noarch.rpm
checksum_type: sha
description:
  BitTorrent is a tool for distributing files. It's extremely easy to use -
  downloads are started by clicking on hyperlinks. Whenever more than one person
  is downloading at once they send pieces of the file(s) to each other, thus
  relieving the central server's bandwidth burden. Even with many simultaneous
  downloads, the upload burden on the central server remains quite small, since
  each new downloader introduces new upload capacity.


pkgId: a25eb10b97d9ba04c178ff74c7ef1a4ab79b5120
name: poker2d
arch: i386
version: 1.0.37
epoch: 0
release: 2.fc7
summary: GTK poker client to play on a poker-network server
url: http://pokersource.org/poker-network
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Amusements/Games
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: poker2d-1.0.37-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/poker2d-1.0.37-2.fc7.i386.rpm
checksum_type: sha
description:
  Play poker with other players connected on a poker-network server
  (holdem, omaha, omaha high/low, stud 7 ...) in ring games, sit and go
  or multitables tournaments. poker2d will automaticaly reconnect to
  the table if the connection is lost and allows playing on multiple
  tables simultaneously.


pkgId: 605677819006fde79e6d2b04054b89af9cd9a9dd
name: jack-audio-connection-kit
arch: i386
version: 0.102.20
epoch: 0
release: 4.fc7
summary: The Jack Audio Connection Kit
url: http://www.jackaudio.org
rpm_license: GPL/LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: jack-audio-connection-kit-0.102.20-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jack-audio-connection-kit-0.102.20-4.fc7.i386.rpm
checksum_type: sha
description:
  JACK is a low-latency audio server, written primarily for the Linux
  operating system. It can connect a number of different applications to
  an audio device, as well as allowing them to share audio between
  themselves. Its clients can run in their own processes (ie. as a
  normal application), or can they can run within a JACK server (ie. a
  "plugin").

  JACK is different from other audio server efforts in that it has been
  designed from the ground up to be suitable for professional audio
  work. This means that it focuses on two key areas: synchronous
  execution of all clients, and low latency operation.


pkgId: 38853ccc78ca8d384eacd8661e7a6d1a871bce36
name: perl-Module-ScanDeps
arch: noarch
version: 0.74
epoch: 0
release: 1.fc7
summary: Recursively scan Perl code for dependencies
url: http://search.cpan.org/dist/Module-ScanDeps/
rpm_license: GPL or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Module-ScanDeps-0.74-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/perl-Module-ScanDeps-0.74-1.fc7.noarch.rpm
checksum_type: sha
description:
  An application of Module::ScanDeps is to generate executables from scripts
  that contains necessary modules; this module supports two such projects,
  PAR and App::Packer.  Please see their respective documentations on CPAN
  for further information.


pkgId: 6a9205242cd9eb7d943c9411ff449aaf1fe9a724
name: perl-TimeDate
arch: noarch
version: 1.16
epoch: 1
release: 3.2.1
summary: A Perl module for time and date manipulation
url: http://search.cpan.org/dist/TimeDate/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: natasha.build.redhat.com
rpm_sourcerpm: perl-TimeDate-1.16-3.2.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-TimeDate-1.16-3.2.1.noarch.rpm
checksum_type: sha
description:
  This module includes a number of smaller modules suited for
  manipulation of time and date strings with Perl.  In particular, the
  Date::Format and Date::Parse modules can display and read times and
  dates in various formats, providing a more reliable interface to
  textual representations of points in time.


pkgId: db0f15398041b9c07f344675887170626aa75a69
name: yum-updatesd
arch: noarch
version: 3.2.0
epoch: 0
release: 1.fc7
summary: Update notification daemon
url: http://linux.duke.edu/yum/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/System
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: yum-3.2.0-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/yum-updatesd-3.2.0-1.fc7.noarch.rpm
checksum_type: sha
description:
  yum-updatesd provides a daemon which checks for available updates and
  can notify you when they are available via email, syslog or dbus.


pkgId: 04dbac287dcda562757495e16461065de804b0ea
name: akode-libsamplerate
arch: i386
version: 2.0.1
epoch: 0
release: 6.fc7
summary: Resampler based on (GPL) libsamplerate for akode
url: http://www.kde-apps.org/content/show.php?content=30375
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: akode-2.0.1-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/akode-libsamplerate-2.0.1-6.fc7.i386.rpm
checksum_type: sha
description:
  Resampler based on (GPL) libsamplerate for akode.
  Packaged separately to keep main/core %{akode} package LGPL-clean.


pkgId: 8e7a6772121c14e141eaed045e6a05e56c82c647
name: perl-HTML-Tree
arch: noarch
version: 3.23
epoch: 1
release: 1.fc7
summary: HTML tree handling modules for Perl
url: http://search.cpan.org/dist/HTML-Tree/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-HTML-Tree-3.23-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-HTML-Tree-3.23-1.fc7.noarch.rpm
checksum_type: sha
description:
  This distribution contains a suite of modules for representing,
  creating, and extracting information from HTML syntax trees; there is
  also relevent documentation.  These modules used to be part of the
  libwww-perl distribution, but are now unbundled in order to facilitate
  a separate development track.


pkgId: c708db3d4225b4a2f18e4db45ae2959252fd6199
name: clusterssh
arch: noarch
version: 3.19.1
epoch: 0
release: 2.fc6
summary: Secure concurrent multi-server terminal control
url: http://clusterssh.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: clusterssh-3.19.1-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/clusterssh-3.19.1-2.fc6.noarch.rpm
checksum_type: sha
description:
  Control multiple terminals open on different servers to perform administration
  tasks, for example multiple hosts requiring the same config within a cluster.
  Not limited to use with clusters, however.


pkgId: 491d054b7c6bec61b2d500e717a2323ad6d959ce
name: dhcdbd
arch: i386
version: 2.7
epoch: 0
release: 4.fc7
summary: DHCP D-BUS daemon (dhcdbd) controls dhclient sessions with D-BUS
url: http://people.redhat.com/dcantrel/dhcdbd/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Daemons
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: dhcdbd-2.7-4.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/dhcdbd-2.7-4.fc7.i386.rpm
checksum_type: sha
description:
  dhcdbd provides a D-BUS interface to the ISC dhclient software.  The
  daemon provides access to DHCP configuration operations and stores those
  options persistently.  Other D-BUS applications can receive notifications
  of changes in the client's DHCP configuration.


pkgId: 4e3f8dbd73227bab53a139ecc3ca6ee105e3d26b
name: mxml
arch: i386
version: 2.2.2
epoch: 0
release: 7.fc6
summary: Miniature XML development library
url: http://www.easysw.com/~mike/mxml/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: mxml-2.2.2-7.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mxml-2.2.2-7.fc6.i386.rpm
checksum_type: sha
description:
  Mini-XML is a small XML parsing library that you can use to read XML
  and XML-like data files in your application without requiring large
  non-standard libraries.


pkgId: a496b74b4dd0a17280ffce58500dcd22b3b2a5d7
name: brlapi-devel
arch: i386
version: 0.4.1
epoch: 0
release: 3.fc7
summary: Headers, static archive, and documentation for BrlAPI.
url: http://mielke.cc/brltty/
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: brltty-3.7.2-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/brlapi-devel-0.4.1-3.fc7.i386.rpm
checksum_type: sha
description:
  This package provides the header files, static archive, shared object
  linker reference, and reference documentation for BrlAPI (the
  Application Programming Interface to BRLTTY).  It enables the
  implementation of applications which take direct advantage of a
  refreshable braille display in order to present information in ways
  which are more appropriate for blind users and/or to provide user
  interfaces which are more specifically atuned to their needs.

  Install this package if you are developing or maintaining an application
  which directly accesses a refreshable braille display.


pkgId: 3223e5b87f7ba74f3b46af9c52db581e706bd6bc
name: phpPgAdmin
arch: noarch
version: 4.1.1
epoch: 0
release: 1.fc7
summary: Web-based PostgreSQL administration
url: http://phppgadmin.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: phpPgAdmin-4.1.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/phpPgAdmin-4.1.1-1.fc7.noarch.rpm
checksum_type: sha
description:
  phpPgAdmin is a fully functional web-based administration utility for
  a PostgreSQL database server. It handles all the basic functionality
  as well as some advanced features such as triggers, views and
  functions (stored procedures). It also has Slony-I support.


pkgId: db60c2e80dfef6fdb90ca2996ef4409e348f325c
name: psi
arch: i386
version: 0.10
epoch: 0
release: 5.fc6
summary: Jabber client based on Qt
url: http://psi-im.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: psi-0.10-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/psi-0.10-5.fc6.i386.rpm
checksum_type: sha
description:
  Psi is the premiere Instant Messaging application designed for Microsoft
  Windows, Apple Mac OS X and GNU/Linux. Built upon an open protocol named
  Jabber, Psi is a fast and lightweight messaging client that utilises the best
  in open source technologies. Psi contains all the features necessary to chat,
  with no bloated extras that slow your computer down. The Jabber protocol
  provides gateways to other protocols as AIM, ICQ, MSN and Yahoo!.
  If you want SSL support, install the qca-tls package.


pkgId: 7711acca32707a1b3c268951331a573e3024f09e
name: libgnomedb-sharp
arch: i386
version: 1.9.100
epoch: 1
release: 15.fc7
summary: Mono bindings for libgnomedb
url: http://www.gnome-db.org/
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: System Environment/Libraries
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: libgnomedb-1.9.100-15.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/libgnomedb-sharp-1.9.100-15.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the dll files needed to run (and compile) Mono
  applications which use libgnomedb.


pkgId: 4585e03f6c608d5f61a020b65e72a29747a19a35
name: kuipc
arch: i386
version: 2006
epoch: 0
release: 11.fc7
summary: Cernlib's Kit for a User Interface Package (KUIP) compiler
url: http://cernlib.web.cern.ch/cernlib/
rpm_license: GPL/LGPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: cernlib-2006-11.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/kuipc-2006-11.fc7.i386.rpm
checksum_type: sha
description:
  KUIPC, the Kit for a User Interface Package Compiler, is a tool to simplify
  the writing of a program's user interface code. It takes as input a Command
  Definition File (CDF) that describes the commands to be understood by the
  program, and outputs C or FORTRAN code that makes the appropriate function
  calls to set up the user interface. This code can then be compiled and linked
  with the rest of the program. Since the generated code uses KUIP routines,
  the program must also be linked against the Packlib library that contains them.


pkgId: 818cd5f9de43194abfa4c0030e0fc0e5eb188e25
name: frozen-bubble
arch: i386
version: 2.1.0
epoch: 0
release: 2.fc7
summary: Frozen Bubble arcade game
url: http://www.frozen-bubble.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: frozen-bubble-2.1.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/frozen-bubble-2.1.0-2.fc7.i386.rpm
checksum_type: sha
description:
  Full-featured, colorful animated penguin eyecandy, 100 levels of 1p game, hours
  and hours of 2p game, 3 professional quality 20-channels musics, 15 stereo
  sound effects, 7 unique graphical transition effects and a level editor.
  You need this game.


pkgId: a1d829c00b606aed5b7a0614ba2e9a137aa812c9
name: pth
arch: i386
version: 2.0.7
epoch: 0
release: 1.fc7
summary: The GNU Portable Threads library
url: http://www.gnu.org/software/pth/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: pth-2.0.7-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pth-2.0.7-1.fc7.i386.rpm
checksum_type: sha
description:
  Pth is a very portable POSIX/ANSI-C based library for Unix platforms
  which provides non-preemptive priority-based scheduling for multiple
  threads of execution ("multithreading") inside server applications.
  All threads run in the same address space of the server application,
  but each thread has it's own individual program-counter, run-time
  stack, signal mask and errno variable.


pkgId: f557dd89a385b7d701d6219ea522c9757b2117df
name: CCfits
arch: i386
version: 1.6
epoch: 0
release: 2.fc7
summary: A C++ interface for cfitsio
url: http://heasarc.gsfc.nasa.gov/docs/software/fitsio/ccfits
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: CCfits-1.6-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/CCfits-1.6-2.fc7.i386.rpm
checksum_type: sha
description:
  CCfits is an object oriented interface to the cfitsio library. It is designed
  to make the capabilities of cfitsio available to programmers working in C++.
  It is written in ANSI C++ and implemented using the C++ Standard Library
  with namespaces, exception handling, and member template functions.


pkgId: 10c05aa4cdddf604f7b81ba2a5093941c7f0e782
name: OpenEXR-devel
arch: i386
version: 1.4.0a
epoch: 0
release: 3.fc6
summary: Headers and libraries for building apps that use OpenEXR
url: http://www.openexr.com/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: OpenEXR-1.4.0a-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/OpenEXR-devel-1.4.0a-3.fc6.i386.rpm
checksum_type: sha
description:
  This package contains headers and libraries required to build applications that
  use the OpenEXR format.


pkgId: 54fc5dfc1d8b7f3d63126d2ad194a6e41ff57485
name: xfce4-clipman-plugin
arch: i386
version: 0.8.0
epoch: 0
release: 2.fc7
summary: Clipboard manager plugin for the Xfce panel
url: http://goodies.xfce.org/projects/panel-plugins/xfce4-clipman-plugin
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xfce4-clipman-plugin-0.8.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xfce4-clipman-plugin-0.8.0-2.fc7.i386.rpm
checksum_type: sha
description:
  This is a simple cliboard history for Xfce panel. It includes a "Clear
  clipboard" option, and a drag-and-drop paste feature.


pkgId: 1e18c264e05c1705abc95492f8ea92e72b40e043
name: flac123
arch: i386
version: 0.0.9
epoch: 0
release: 6.fc7
summary: Command-line program for playing FLAC audio files
url: http://flac-tools.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: flac123-0.0.9-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/flac123-0.0.9-6.fc7.i386.rpm
checksum_type: sha
description:
  flac123 is a command-line program for playing FLAC audio files

  FLAC stands for Free Lossless Audio Codec. Grossly oversimplified, FLAC
  is similar to Ogg Vorbis, but lossless


pkgId: d6b62b8851d0ab87dbaca33e07e364ce0c572b90
name: fmio
arch: i386
version: 2.0.8
epoch: 0
release: 8.0.fc7
summary: FM radio card manipulation utility
url: http://jumbo.narod.ru/fmio.html
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer1.fedora.redhat.com
rpm_sourcerpm: fmio-2.0.8-8.0.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fmio-2.0.8-8.0.fc7.i386.rpm
checksum_type: sha
description:
  The fmio is a small program to set and change fm radio card parameters.
  It sets frequency, volume of the card, reports signal strength on the
  working frequency and can set the radio card output to mono (if the card
  driver supports it).


pkgId: 498fca7f4df02857b39a374f2e3e0ef685b1595a
name: lucidlife
arch: i386
version: 0.9.2
epoch: 0
release: 1.fc7
summary: A Conway's Life simulator
url: http://icculus.org/~jcspray/LucidLife/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: lucidlife-0.9.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lucidlife-0.9.2-1.fc7.i386.rpm
checksum_type: sha
description:
  LucidLife is a Conway's Life simulator. The rules are rather simple. The game
  is started with a large grid of cell locations, and an arbitrary set of
  living cells. On each turn, each cell thrives or dies based on the number of
  cells which sourround it. A dead (empty) cell with three live cells around it
  becomes a living cell (a birth); a living cell with two or three neighbors
  survives; otherwise the cell dies (due to overcrowding) or remains dead
  (due to loneliness). It is based on the the GtkLife project, but with a
  more modern user interface and other enhancements.


pkgId: bd36128c434f6ece60827c5b29b36100dbd99734
name: jline
arch: i386
version: 0.9.9
epoch: 0
release: 1jpp.1.fc7
summary: Java library for reading and editing user input in console applications
url: http://jline.sf.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: jline-0.9.9-1jpp.1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jline-0.9.9-1jpp.1.fc7.i386.rpm
checksum_type: sha
description:
  JLine is a java library for reading and editing user input in console
  applications. It features tab-completion, command history, password
  masking, customizable keybindings, and pass-through handlers to use to
  chain to other console applications.


pkgId: a846428e5dc756b328356f4a20c80bd57d866f45
name: perl-DBD-SQLite
arch: i386
version: 1.12
epoch: 0
release: 2.fc6
summary: Self Contained RDBMS in a DBI Driver
url: http://search.cpan.org/dist/DBD-SQLite/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: perl-DBD-SQLite-1.12-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-DBD-SQLite-1.12-2.fc6.i386.rpm
checksum_type: sha
description:
  SQLite is a public domain RDBMS database engine that you can find at
  http://www.hwaci.com/sw/sqlite/.

  Rather than ask you to install SQLite first, because SQLite is public domain,
  DBD::SQLite includes the entire thing in the distribution. So in order to get
  a fast transaction capable RDBMS working for your perl project you simply have
  to install this module, and nothing else.

  As of version 1.09 it can use the external SQLite library (>= 3.1.3).


pkgId: a2e807ab683f6633a5fc9fb16a199d389cdfa76b
name: popt
arch: i386
version: 1.10.2
epoch: 0
release: 46.fc7
summary: A C library for parsing command line parameters
url: http://www.rpm.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: rpm-4.4.2-46.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/popt-1.10.2-46.fc7.i386.rpm
checksum_type: sha
description:
  Popt is a C library for parsing command line parameters. Popt was
  heavily influenced by the getopt() and getopt_long() functions, but it
  improves on them by allowing more powerful argument expansion. Popt
  can parse arbitrary argv[] style arrays and automatically set
  variables based on command line arguments. Popt allows command line
  arguments to be aliased via configuration files and includes utility
  functions for parsing arbitrary strings into argv[] arrays using
  shell-like rules.


pkgId: fdc6b5486a3440ff5514d63a61e8470be985b513
name: lightning
arch: i386
version: 1.2
epoch: 0
release: 4.fc6
summary: GNU Lightning
url: http://www.gnu.org/software/lightning/lightning.html
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: lightning-1.2-4.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lightning-1.2-4.fc6.i386.rpm
checksum_type: sha
description:
  GNU lightning is a library to aid in making portable programs
  that compiles assembly code at run time.


pkgId: 8bb462f09a213e569030ca822822c8dd56950933
name: offlineimap
arch: noarch
version: 4.0.16
epoch: 0
release: 3.fc7
summary: Powerful IMAP/Maildir synchronization and reader support
url: http://software.complete.org/offlineimap/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: offlineimap-4.0.16-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/offlineimap-4.0.16-3.fc7.noarch.rpm
checksum_type: sha
description:
  OfflineIMAP is a tool to simplify your e-mail reading. With OfflineIMAP,
  you can read the same mailbox from multiple computers.  You get a
  current copy of your messages on each computer, and changes you make one
  place will be visible on all other systems. For instance, you can delete
  a message on your home computer, and it will appear deleted on your work
  computer as well. OfflineIMAP is also useful if you want to use a mail
  reader that does not have IMAP support, has poor IMAP support, or does
  not provide disconnected operation.


pkgId: eafbe3632451a18d0c40ad5ffad1ffb68ccdc161
name: libfwbuilder-devel
arch: i386
version: 2.1.10
epoch: 0
release: 1.fc7
summary: Firewall Builder API Libraries and Header Files
url: http://www.fwbuilder.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libfwbuilder-2.1.10-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libfwbuilder-devel-2.1.10-1.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the libraries  and header files that programmer would
  need to develop applications using Firewall Builder API.


pkgId: 337dbfcd3c3016e514013495bf0e7c1448c9e222
name: athcool
arch: i386
version: 0.3.11
epoch: 0
release: 5.fc6
summary: Enables/disables Powersaving mode for AMD processors
url: http://members.jcom.home.ne.jp/jacobi/linux/softwares.html#athcool
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: athcool-0.3.11-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/athcool-0.3.11-5.fc6.i386.rpm
checksum_type: sha
description:
  athcool is a small utility, enabling/disabling Powersaving mode
  for AMD Athlon/Duron processors.

  Since enabling Powersaving mode, you can save power consumption,
  lower CPU temprature when CPU is idle.

  Powersaving works if your kernel support ACPI (APM not work),
  because athcool only set/unset "Disconnect enable when STPGNT detected"
  bits in the Northbridge of Chipset.
  To really save power, someone has to send the STPGNT signal when idle.
  This is done by the ACPI subsystem when C2 state entered.

  !!!WARNING!!!
  Depending on your motherboard and/or hardware components,
  enabling powersaving mode may cause that:

   * noisy or distorted sound playback
   * a slowdown in harddisk performance
   * system locks or instability
   * massive filesystem corruption (rare, but observed at least once)

  If you met those problems, you should not use athcool.
  Please use athcool AT YOUR OWN RISK.


pkgId: 1fa9019dea234132a6afd82f06e1b7f240e643f1
name: perl-Text-Levenshtein
arch: noarch
version: 0.05
epoch: 0
release: 4.fc7
summary: Implementation of the Levenshtein edit distance
url: http://search.cpan.org/dist/Text-Levenshtein/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Text-Levenshtein-0.05-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Text-Levenshtein-0.05-4.fc7.noarch.rpm
checksum_type: sha
description:
  This module implements the Levenshtein edit distance. The Levenshtein edit
  distance is a measure of the degree of proximity between two strings. This
  distance is the number of substitutions, deletions or insertions ("edits")
  needed to transform one string into the other one (and vice versa). When
  two strings have distance 0, they are the same. A good point to start is:
  <http://www.merriampark.com/ld.htm>


pkgId: 56cab5831976e17e8680a75b20c14af85464aa4b
name: numpy
arch: i386
version: 1.0.1
epoch: 0
release: 4.fc7
summary: A fast multidimensional array facility for Python
url: http://numeric.scipy.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: numpy-1.0.1-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/numpy-1.0.1-4.fc7.i386.rpm
checksum_type: sha
description:
  NumPy is a general-purpose array-processing package designed to
  efficiently manipulate large multi-dimensional arrays of arbitrary
  records without sacrificing too much speed for small multi-dimensional
  arrays.  NumPy is built on the Numeric code base and adds features
  introduced by numarray as well as an extended C-API and the ability to
  create arrays of arbitrary type.

  There are also basic facilities for discrete fourier transform,
  basic linear algebra and random number generation. Also included in
  this package is a version of f2py that works properly with NumPy.


pkgId: 64a71908fb018db5c11cee419c3027bedb0e1ff7
name: php-gd
arch: i386
version: 5.2.2
epoch: 0
release: 3
summary: A module for PHP applications for using the gd graphics library
url: http://www.php.net/
rpm_license: The PHP License v3.01
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: php-5.2.2-3.src.rpm
rpm_packager: Koji
location_href: Fedora/php-gd-5.2.2-3.i386.rpm
checksum_type: sha
description:
  The php-gd package contains a dynamic shared object that will add
  support for using the gd graphics library to PHP.


pkgId: 4fba7b9938b37fbf5124cc657479011e6c159b1e
name: pbzip2
arch: i386
version: 1.0.1
epoch: 0
release: 1.fc7
summary: Parallel implementation of bzip2
url: http://www.compression.ca/pbzip2/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/File
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: pbzip2-1.0.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pbzip2-1.0.1-1.fc7.i386.rpm
checksum_type: sha
description:
  PBZIP2 is a parallel implementation of the bzip2 block-sorting file
  compressor that uses pthreads and achieves near-linear speedup on SMP
  machines.  The output of this version is fully compatible with bzip2
  v1.0.2 or newer (ie: anything compressed with pbzip2 can be
  decompressed with bzip2).


pkgId: e00c383a1000e5a1bc1d5054b018dfbfabd5c47e
name: perl-Params-Validate
arch: i386
version: 0.88
epoch: 0
release: 1.fc7
summary: Params-Validate Perl module
url: http://search.cpan.org/dist/Params-Validate/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-Params-Validate-0.88-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Params-Validate-0.88-1.fc7.i386.rpm
checksum_type: sha
description:
  The Params::Validate module allows you to validate method or function
  call parameters to an arbitrary level of specificity. At the simplest
  level, it is capable of validating the required parameters were given
  and that no unspecified additional parameters were passed in. It is
  also capable of determining that a parameter is of a specific type,
  that it is an object of a certain class hierarchy, that it possesses
  certain methods, or applying validation callbacks to arguments.


pkgId: 3fa39ab1a6a39aed9ffaff1303eade146465e01e
name: python-twisted-web
arch: i386
version: 0.6.0
epoch: 0
release: 4.fc7
summary: Twisted web server, programmable in Python
url: http://twistedmatrix.com/trac/wiki/TwistedWeb
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: python-twisted-web-0.6.0-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-twisted-web-0.6.0-4.fc7.i386.rpm
checksum_type: sha
description:
  Twisted is an event-based framework for internet applications.

  Twisted Web is a complete web server, aimed at hosting web
  applications using Twisted and Python, but fully able to serve static
  pages, also.


pkgId: 926fdd81726c3bb2d8be65a2c2fde51d3871f3ea
name: perl-DBD-Mock
arch: noarch
version: 1.34
epoch: 0
release: 2.fc7
summary: Mock database driver for testing
url: http://search.cpan.org/dist/DBD-Mock/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-DBD-Mock-1.34-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-DBD-Mock-1.34-2.fc7.noarch.rpm
checksum_type: sha
description:
  Testing with databases can be tricky. If you are developing a system
  married to a single database then you can make some assumptions about your
  environment and ask the user to provide relevant connection information.
  But if you need to test a framework that uses DBI, particularly a framework
  that uses different types of persistence schemes, then it may be more
  useful to simply verify what the framework is trying to do -- ensure the
  right SQL is generated and that the correct parameters are bound. DBD::Mock
  makes it easy to just modify your configuration (presumably held outside
  your code) and just use it instead of DBD::Foo (like DBD::Pg or DBD::mysql)
  in your framework.


pkgId: f7ce7e0768a9be7096fa41e8a8bf858f7871f05f
name: thunar-volman
arch: i386
version: 0.1.2
epoch: 0
release: 1.fc7
summary: Automatic management of removable drives and media for the Thunar file manager
url: http://foo-projects.org/~benny/projects/thunar-volman/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: thunar-volman-0.1.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/thunar-volman-0.1.2-1.fc7.i386.rpm
checksum_type: sha
description:
  The Thunar Volume Manager is an extension for the Thunar file manager, which
  enables automatic management of removable drives and media. For example, if
  thunar-volman is installed and configured properly, and you plug in your
  digital camera, it will automatically launch your preferred photo application
  and import the new pictures from the camera into your photo collection.


pkgId: a6555484917768147a088ca0ab2ec0a4cd84272b
name: perl-Test-Tester
arch: noarch
version: 0.104
epoch: 0
release: 2.fc7
summary: Ease testing test modules built with Test::Builder
url: http://search.cpan.org/dist/Test-Tester/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Test-Tester-0.104-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Test-Tester-0.104-2.fc7.noarch.rpm
checksum_type: sha
description:
  If you have written a test module based on Test::Builder then Test::Tester
  allows you to test it with the minimum of effort.


pkgId: 962193c1da0e598fa33515125f89f2353950d13a
name: listen
arch: i386
version: 0.5
epoch: 0
release: 15.fc7.1
summary: A music manager and player for GNOME
url: http://listengnome.free.fr
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Multimedia
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: listen-0.5-15.fc7.1.src.rpm
rpm_packager: Koji
location_href: Fedora/listen-0.5-15.fc7.1.i386.rpm
checksum_type: sha
description:
  Listen is a music manager and player for GNOME
  With listen you can:
  * Play your favorite songs
  * Manage your library
  * Manage your ipod
  * Make playlists
  * Automatically or manually download album covers
  * Automatically synchronize album covers with iPod
  * Easily burn an audio CD
  * Directly get informations from wikipedia when you play a song
  * See the lyrics of a song
  * Have statistics about your favorite songs, albums or artists
  * Listen to web radio
  * Submit your songs to Audioscrobbler
  * Quick access to last.fm related file
  With listen you will be able to:
   * Listen And Rip Audio CDs
   * Browse and listen songs on a DAAP share
   * Share you library via a DAAP share
   * Fill metadata with musicbrainz
   * Make smart playlists


pkgId: 50fb01c29400035790493059a1e6878a31685a12
name: mosml
arch: i386
version: 2.01
epoch: 0
release: 9.fc7
summary: Moscow ML
url: http://www.dina.kvl.dk/~sestoft/mosml.html
rpm_license: GPL/ATT/INRIA/Distributable
rpm_group: Development/Languages
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: mosml-2.01-9.fc7.src.rpm
location_href: Fedora/mosml-2.01-9.fc7.i386.rpm
checksum_type: sha
description:
  Moscow ML provides a light-weight implementation of full Standard ML,
  including Modules and some extensions.  Standard ML is a strict
  functional language widely used in teaching and research.


pkgId: 2f5c3e1a964accfc6bfe4d41f5e12aa156c45df2
name: perl-Tree-Simple-VisitorFactory
arch: noarch
version: 0.10
epoch: 0
release: 2.fc7
summary: Factory object for dispensing Visitor objects
url: http://search.cpan.org/dist/Tree-Simple-VisitorFactory/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Tree-Simple-VisitorFactory-0.10-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Tree-Simple-VisitorFactory-0.10-2.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains a collection of Tree::Simple::Visitor::* objects,
  and a factory for easily creating instances of them.


pkgId: 0e3ed133bd1152fb89625190591840ec87dd72c9
name: xmldb-api-sdk
arch: i386
version: 0.1
epoch: 1
release: 0.1.20011111cvs.1jpp.2.fc7
summary: SDK for xmldb-api
url: http://xmldb-org.sourceforge.net
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Java
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xmldb-api-0.1-0.1.20011111cvs.1jpp.2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xmldb-api-sdk-0.1-0.1.20011111cvs.1jpp.2.fc7.i386.rpm
checksum_type: sha
description:
  The reference implementation provides a very simple file system based
  implementation of the XML:DB API. This provides what is basically a very
  simple native XML database that uses directories to represent collections and
  just stores the XML in files.

  The driver development kit provides a set of base classes that can be
  extended to simplify and speed the development of XML:DB API drivers. These
  classes are used to provide the basis for the reference implementation and
  therefore a simple example of how a driver can be implemented. Using the SDK
  classes significantly reduces the amount of code that must be written to
  create a new driver.

  Along with the SDK base classes the SDK also contains a set of jUnit test
  cases that can be used to help validate the driver while it is being
  developed. The test cases are still in development but there are enough tests
  currently to be useful.


pkgId: f0c783fe95a8dd398ef4704f5fa34631a95e1ee4
name: perl-DateTime-Event-ICal
arch: noarch
version: 0.09
epoch: 0
release: 3.fc7
summary: Perl DateTime extension for computing rfc2445 recurrences
url: http://search.cpan.org/dist/DateTime-Event-ICal/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-DateTime-Event-ICal-0.09-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-DateTime-Event-ICal-0.09-3.fc7.noarch.rpm
checksum_type: sha
description:
  This module provides convenience methods that let you easily create
  DateTime::Set objects for rfc2445 style recurrences.


pkgId: 80799d7554d3da5ccead59a68e0571fb2a08d2be
name: wireshark
arch: i386
version: 0.99.5
epoch: 0
release: 1.fc7
summary: Network traffic analyzer
url: http://www.wireshark.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: wireshark-0.99.5-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/wireshark-0.99.5-1.fc7.i386.rpm
checksum_type: sha
description:
  Wireshark is a network traffic analyzer for Unix-ish operating systems.

  This package lays base for libpcap, a packet capture and filtering
  library, contains command-line utilities, contains plugins and
  documentation for wireshark. A graphical user interface is packaged
  separately to GTK+ package.


pkgId: 934af123bdfe5d2686c9c50477e7145f8e013a67
name: postfix-pflogsumm
arch: i386
version: 2.3.6
epoch: 2
release: 1
summary: A Log Summarizer/Analyzer for the Postfix MTA
url: http://www.postfix.org
rpm_license: IBM Public License
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: postfix-2.3.6-1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/postfix-pflogsumm-2.3.6-1.i386.rpm
checksum_type: sha
description:
  Pflogsumm is a log analyzer/summarizer for the Postfix MTA.  It is
  designed to provide an over-view of Postfix activity. Pflogsumm
  generates summaries and, in some cases, detailed reports of mail
  server traffic volumes, rejected and bounced email, and server
  warnings, errors and panics.


pkgId: bfda3b6566280a43400492e8184841dbfc5c68fe
name: uim-devel
arch: i386
version: 1.4.1
epoch: 0
release: 3.fc7
summary: Development files for the Uim library
url: http://uim.freedesktop.org/
rpm_license: GPL/BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: uim-1.4.1-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/uim-devel-1.4.1-3.fc7.i386.rpm
checksum_type: sha
description:
  Uim is a multilingual input method library. Uim aims to
  provide secure and useful input methods for all
  languages.

  This package contains the header files and the libraries which is
  needed for developing Uim applications.


pkgId: 4b988144aeb5949e0f56cf60023b44be4710d23f
name: geany
arch: i386
version: 0.10.1
epoch: 0
release: 1.fc7
summary: A fast and lightweight IDE using GTK2
url: http://geany.uvena.de/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: geany-0.10.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/geany-0.10.1-1.fc7.i386.rpm
checksum_type: sha
description:
  Geany is a small and fast editor with basic features of an
  integrated development environment.

  Some features:
  - syntax highlighting
  - code completion
  - code folding
  - call tips
  - folding
  - many supported filetypes like C, Java, PHP, HTML, Python, Perl, Pascal
  - symbol lists


pkgId: 6e52d4bd8f8cf05ee7ec5df8bdd7fe9f49f8bc6d
name: beryl-manager
arch: i386
version: 0.2.0
epoch: 0
release: 1.fc7
summary: Beryl window decorator and theme management utility
url: http://www.beryl-project.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: beryl-manager-0.2.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/beryl-manager-0.2.0-1.fc7.i386.rpm
checksum_type: sha
description:
  Beryl is a combined window manager and compositing
  manager that runs on top of Xgl or AIGLX using OpenGL
  to provide effects accelerated by a 3D graphics card
  on the desktop. Beryl is a community-driven fork of
  Compiz.

  Beryl-manager is a tray application to keep beryl
  up and running, switch window managers, decorators,
  launch beryl-settings and the beryl theme tool.


pkgId: d7634fa9b3571af6e2fb6f6ea63cfce532e41ac1
name: ccache
arch: i386
version: 2.4
epoch: 0
release: 8.fc7
summary: C/C++ compiler cache
url: http://ccache.samba.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: ccache-2.4-8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ccache-2.4-8.fc7.i386.rpm
checksum_type: sha
description:
  ccache is a compiler cache.  It acts as a caching pre-processor to
  C/C++ compilers, using the -E compiler switch and a hash to detect
  when a compilation can be satisfied from cache.  This often results in
  a 5 to 10 times speedup in common compilations.


pkgId: 7a5de109fe9185c99aabcef8dc7662ae005359ba
name: jakarta-commons-dbcp
arch: i386
version: 1.2.1
epoch: 0
release: 10jpp.1.fc7
summary: Jakarta Commons DataBase Pooling Package
url: http://jakarta.apache.org/commons/dbcp
rpm_license: Apache Software License
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries/Java
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: jakarta-commons-dbcp-1.2.1-10jpp.1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jakarta-commons-dbcp-1.2.1-10jpp.1.fc7.i386.rpm
checksum_type: sha
description:
  Many Jakarta projects support interaction with a relational
  database. Creating a new connection for each user can be time
  consuming (often requiring multiple seconds of clock time),
  in order to perform a database transaction that might take
  milliseconds. Opening a connection per user can be unfeasible
  in a publicly-hosted Internet application where the number of
  simultaneous users can be very large. Accordingly, developers
  often wish to share a "pool" of open connections between all
  of the application's current users. The number of users actually
  performing a request at any given time is usually a very small
  percentage of the total number of active users, and during
  request processing is the only time that a database connection
  is required. The application itself logs into the DBMS, and
  handles any user account issues internally.


pkgId: 210edde43185884be2c11899ef31377d58807e5c
name: haddock
arch: i386
version: 0.8
epoch: 0
release: 1.fc7
summary: Haddock documentation tool for annotated Haskell source code
url: http://www.haskell.org/haddock/
rpm_license: BSD-like
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: haddock-0.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/haddock-0.8-1.fc7.i386.rpm
checksum_type: sha
description:
  Haddock is a tool for automatically generating hyperlinked documentation from
  annotated Haskell source code. It is primary intended for documenting
  libraries, but it is useful for any kind of Haskell code.

  Haddock lets you write documentation annotations next to the definitions of
  functions and types in the source code in a lightweight syntax.


pkgId: 766b8bb0b26df76ad9a3098b706933623be7a8f8
name: arts
arch: i386
version: 1.5.6
epoch: 8
release: 4.fc7
summary: aRts (analog realtime synthesizer) - the KDE sound system
url: http://www.kde.org
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: System Environment/Daemons
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: arts-1.5.6-4.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/arts-1.5.6-4.fc7.i386.rpm
checksum_type: sha
description:
  arts (analog real-time synthesizer) is the sound system of KDE 3.

  The principle of arts is to create/process sound using small modules which do
  certain tasks. These may be create a waveform (oscillators), play samples,
  filter data, add signals, perform effects like delay/flanger/chorus, or
  output the data to the soundcard.

  By connecting all those small modules together, you can perform complex
  tasks like simulating a mixer, generating an instrument or things like
  playing a wave file with some effects.


pkgId: 986cb3a9196c46468fb4daee88b4520b6f064a1e
name: opencdk-devel
arch: i386
version: 0.5.13
epoch: 0
release: 1.fc7
summary: Files which are needed to develop applications using opencdk
url: http://www.gnu.org/software/gnutls/download.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: opencdk-0.5.13-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/opencdk-devel-0.5.13-1.fc7.i386.rpm
checksum_type: sha
description:
  This library provides basic parts of the OpenPGP message format.  For
  reference, please read RFC2440. Due to some possible security problems,
  the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.

  This package contains headerfiles and libraries which are needed to
  develop applications based on opencdk.


pkgId: 670b67ad56cea5af39ae7a36afa9a9c9ae77d64b
name: plexus-container-default
arch: noarch
version: 1.0
epoch: 0
release: 0.1.a8.1jpp.1.fc7
summary: Default Plexus Container
url: http://plexus.codehaus.org/
rpm_license: Apache Software License and MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: plexus-container-default-1.0-0.1.a8.1jpp.1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/plexus-container-default-1.0-0.1.a8.1jpp.1.fc7.noarch.rpm
checksum_type: sha
description:
  The Plexus project seeks to create end-to-end developer tools for
  writing applications. At the core is the container, which can be
  embedded or for a full scale application server. There are many
  reusable components for hibernate, form processing, jndi, i18n,
  velocity, etc. Plexus also includes an application server which
  is like a J2EE application server, without all the baggage.


pkgId: 02a3777cfc4023a1b89d5caf5edf1a63c8bc2a58
name: openhpi
arch: i386
version: 2.8.1
epoch: 0
release: 1.fc7
summary: openhpi Hardware Platform Interface (HPI) library and tools
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: openhpi-2.8.1-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/openhpi-2.8.1-1.fc7.i386.rpm
checksum_type: sha
description:
  OpenHPI is an open source project created with the intent of providing an
  implementation of the SA Forum's Hardware Platform Interface (HPI). HPI
  provides an abstracted interface to managing computer hardware, typically for
  chassis and rack based servers. HPI includes resource modeling; access to and
  control over sensor, control, watchdog, and inventory data associated with
  resources; abstracted System Event Log interfaces; hardware events and alerts;
  and a managed hotswap interface.

  OpenHPI provides a modular mechanism for adding new hardware and device support
  easily. Many plugins exist in the OpenHPI source tree to provide access to
  various types of hardware. This includes, but is not limited to, IPMI based
  servers, Blade Center, and machines which export data via sysfs.


pkgId: f2b86e42c9d7ac266c3b7f13ff8dd69c7c77a7d5
name: xalan-j2
arch: i386
version: 2.7.0
epoch: 0
release: 6jpp.1
summary: Java XSLT processor
url: http://xalan.apache.org/
rpm_license: Apache Software License
rpm_vendor: Red Hat, Inc.
rpm_group: Text Processing/Markup/XML
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: xalan-j2-2.7.0-6jpp.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xalan-j2-2.7.0-6jpp.1.i386.rpm
checksum_type: sha
description:
  Xalan is an XSLT processor for transforming XML documents into HTML,
  text, or other XML document types. It implements the W3C Recommendations
  for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
  be used from the command line, in an applet or a servlet, or as a module
  in other program.


pkgId: 850a742a457808656fc987e96e69c98c76059e26
name: pygtk2-devel
arch: i386
version: 2.10.4
epoch: 0
release: 2.fc7
summary: Development files for building add-on libraries
url: http://www.pygtk.org/
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: pygtk2-2.10.4-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pygtk2-devel-2.10.4-2.fc7.i386.rpm
checksum_type: sha
description:
  This package contains files required to build wrappers for GTK+ add-on
  libraries so that they interoperate with pygtk.


pkgId: 5b1fcd6e0a8df6487ddab899add4e5ac0ad34c0c
name: postgresql-pltcl
arch: i386
version: 8.2.3
epoch: 0
release: 2.fc7
summary: The Tcl procedural language for PostgreSQL.
url: http://www.postgresql.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Databases
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: postgresql-8.2.3-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/postgresql-pltcl-8.2.3-2.fc7.i386.rpm
checksum_type: sha
description:
  PostgreSQL is an advanced Object-Relational database management
  system.  The postgresql-pltcl package contains the PL/Tcl
  procedural language for the backend.


pkgId: 467fb03ebfa7cf52fb6b37d003e072ae0be1f50a
name: polyml
arch: i386
version: 5.0
epoch: 0
release: 2.fc7
summary: Poly/ML compiler and runtime system
url: http://www.polyml.org
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: polyml-5.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/polyml-5.0-2.fc7.i386.rpm
checksum_type: sha
description:
  Poly/ML is a full implementation of Standard ML available as
  open-source.  This release supports the ML97 version of the language
  and the Standard Basis Library.


pkgId: ad076532292c20e3fc9041251ff982a7c86f46c8
name: prewikka
arch: noarch
version: 0.9.8
epoch: 0
release: 1.fc7
summary: Graphical front-end analysis console for the Prelude Hybrid IDS Framework
url: http://www.prelude-ids.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: prewikka-0.9.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/prewikka-0.9.8-1.fc7.noarch.rpm
checksum_type: sha
description:
  Prewikka is a graphical front-end analysis console for the Prelude
  Hybrid IDS Framework. Providing numerous features, Prewikka facilitates
  the work of users and analysts. It provides alert aggregation and sensor
  and hearbeat views, and has user management and configurable filters. It
  has access to external tools such as whois and traceroute.

  Please read README.fedora for installation instructions.


pkgId: 1c2a7120dd179d011b0b4b580d3a0623b78f4b8a
name: perl-XML-Writer
arch: noarch
version: 0.602
epoch: 0
release: 3.fc7
summary: A simple Perl module for writing XML documents
url: http://search.cpan.org/dist/XML-Writer/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-XML-Writer-0.602-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-XML-Writer-0.602-3.fc7.noarch.rpm
checksum_type: sha
description:
  XML::Writer is a simple Perl module for writing XML documents: it
  takes care of constructing markup and escaping data correctly, and by
  default, it also performs a significant amount of well-formedness
  checking on the output, to make certain (for example) that start and
  end tags match, that there is exactly one document element, and that
  there are not duplicate attribute names.


pkgId: 327b69252092ea62f69a32739c68aa2fadfeba6b
name: strace
arch: i386
version: 4.5.15
epoch: 0
release: 1.fc7
summary: Tracks and displays system calls associated with a running process.
url: http://sourceforge.net/projects/strace/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Debuggers
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: strace-4.5.15-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/strace-4.5.15-1.fc7.i386.rpm
checksum_type: sha
description:
  The strace program intercepts and records the system calls called and
  received by a running process.  Strace can print a record of each
  system call, its arguments and its return value.  Strace is useful for
  diagnosing problems and debugging, as well as for instructional
  purposes.

  Install strace if you need a tool to track the system calls made and
  received by a process.


pkgId: 98a8982256634a0512c9e2aa7a2f6293921d0375
name: eclipse-cdt
arch: i386
version: 3.1.2
epoch: 1
release: 3.fc7
summary: Eclipse C/C++ Development Tools (CDT) plugin
url: http://www.eclipse.org/cdt
rpm_license: Eclipse Public License / CPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: eclipse-cdt-3.1.2-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eclipse-cdt-3.1.2-3.fc7.i386.rpm
checksum_type: sha
description:
  The eclipse-cdt package contains Eclipse features and plugins that are
  useful for C and C++ development.


pkgId: e79bb6611263159b03851bf975a98599345970b5
name: perl-Sys-Syscall
arch: noarch
version: 0.22
epoch: 0
release: 2.fc7
summary: Access system calls that Perl doesn't normally provide access to
url: http://search.cpan.org/dist/Sys-Syscall/
rpm_license: GPL or Artistic
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: perl-Sys-Syscall-0.22-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/perl-Sys-Syscall-0.22-2.fc7.noarch.rpm
checksum_type: sha
description:
  Use epoll, sendfile, from Perl. Mostly Linux-only support now, but more
  syscalls/OSes planned for future.


pkgId: c28db26441ad66af8ff9960d39226aec7a08e148
name: amanda-server
arch: i386
version: 2.5.1p3
epoch: 0
release: 1.fc7
summary: The server side of the AMANDA tape backup system.
url: http://www.amanda.org
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: amanda-2.5.1p3-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/amanda-server-2.5.1p3-1.fc7.i386.rpm
checksum_type: sha
description:
  The amanda-server package should be installed on the AMANDA server,
  the machine attached to the device(s) (such as a tape drive) where backups
  will be written. You will also need to install the amanda package on
  the AMANDA server machine.  And, if the server is also to be backed up, the
  server also needs to have the amanda-client package installed.


pkgId: 13d72e0bcca38b1e98ec7509f7a26f2a3a0ebf65
name: perl-Test-AutoBuild-account
arch: noarch
version: 1.2.0
epoch: 0
release: 3.fc6
summary: User account and directory structure for running builder
url: http://autobuild.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: perl-Test-AutoBuild-1.2.0-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Test-AutoBuild-account-1.2.0-3.fc6.noarch.rpm
checksum_type: sha
description:
  Test-AutoBuild is a Perl framework for performing continuous, unattended,
  automated software builds.

  This sub-package creates a 'builder' user account and the directory structure
  in /var/lib/builder necessary for running a builder instance using the default
  example configuration file.


pkgId: 63019a63934c92793cecd77cbfaeda49969bd124
name: qa-assistant
arch: noarch
version: 0.4.90.5
epoch: 0
release: 2.fc6
summary: Graphical quality assurance report generator
url: http://developer.berlios.de/projects/qa-assistant/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: qa-assistant-0.4.90.5-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qa-assistant-0.4.90.5-2.fc6.noarch.rpm
checksum_type: sha
description:
  QA Assistant is a GNOME Application that presents the user with a graphical
  checklist.  When the user completes the checklist, they can output a review
  that lists the items they have selected with a comment as to whether the
  review has passed or failed.


pkgId: 513b2af582cbbcbbe3a8f37cd801f7f602a5a0a4
name: icecast
arch: i386
version: 2.3.1
epoch: 0
release: 4.fc7
summary: ShoutCast compatible streaming media server
url: http://www.icecast.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: icecast-2.3.1-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/icecast-2.3.1-4.fc7.i386.rpm
checksum_type: sha
description:
  Icecast is a streaming media server which currently supports Ogg Vorbis
  and MP3 audio streams. It can be used to create an Internet radio
  station or a privately running jukebox and many things in between.  It
  is very versatile in that new formats can be added relatively easily and
  supports open standards for commuincation and interaction.


pkgId: 51533708c8595d71b382f274654ea0d6f01c0a57
name: iputils
arch: i386
version: 20070202
epoch: 0
release: 3.fc7
summary: Network monitoring tools including ping
url: http://www.skbuff.net/iputils
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: iputils-20070202-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/iputils-20070202-3.fc7.i386.rpm
checksum_type: sha
description:
  The iputils package contains basic utilities for monitoring a network,
  including ping. The ping command sends a series of ICMP protocol
  ECHO_REQUEST packets to a specified network host to discover whether
  the target machine is alive and receiving network traffic.


pkgId: 5b202763a1fbfd09d8cae7734b0d27887b06ec7e
name: skencil
arch: i386
version: 0.6.17
epoch: 0
release: 13.fc7
summary: Vector drawing program
url: http://www.skencil.org
rpm_license: LGPL, GPL, Historical Permission Notice and Disclaimer
rpm_group: Applications/Multimedia
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: skencil-0.6.17-13.fc7.src.rpm
location_href: Fedora/skencil-0.6.17-13.fc7.i386.rpm
checksum_type: sha
description:
  Skencil is an interactive vector drawing program for X (similar to XFig
  or tgif). It is written almost completely in Python, an object oriented
  interpreted programming language.

  Skencil was originally named "Sketch" (it was renamed with release
  0.6.16) and the name "Sketch" is still used in many places.


pkgId: 6edfc15df21b139da67b75276fbb3a6f39ad8158
name: boa
arch: i386
version: 0.94.14
epoch: 0
release: 0.5.rc21.fc6
summary: Single-tasking HTTP server
url: http://www.boa.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: boa-0.94.14-0.5.rc21.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/boa-0.94.14-0.5.rc21.fc6.i386.rpm
checksum_type: sha
description:
  Boa is a single-tasking HTTP server. That means that unlike traditional web
  servers, it does not fork for each incoming connection, nor does it fork many
  copies of itself to handle multiple connections. It internally multiplexes
  all of the ongoing HTTP connections, and forks only for CGI programs (which
  must be separate processes), automatic directory generation, and automatic
  file gunzipping.
  The primary design goals of Boa are speed and security. Security, in the sense
  of "can't be subverted by a malicious user," not "fine grained access control
  and encrypted communications". Boa is not intended as a feature-packed server.

  Available rpmbuild rebuild options :
  --with : debug access poll
  --without : gunzip sendfile


pkgId: c156d250e6a3889d5e51fc64857e03c54fe228f3
name: xosd-devel
arch: i386
version: 2.2.14
epoch: 0
release: 9.fc7
summary: Development files for the XOSD on-screen display library
url: http://www.ignavus.net/software.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xosd-2.2.14-9.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xosd-devel-2.2.14-9.fc7.i386.rpm
checksum_type: sha
description:
  The xosd-devel package contains static libraries, header files and
  documentation for developing applications that use the XOSD on-screen
  display.


pkgId: c0db297c75bd5589dd2e87db2466e64588e0a1f1
name: zeroinstall-injector
arch: noarch
version: 0.24
epoch: 0
release: 3.fc7
summary: The Zero Install Injector (0launch)
url: http://0install.net
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: zeroinstall-injector-0.24-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/zeroinstall-injector-0.24-3.fc7.noarch.rpm
checksum_type: sha
description:
  A running process is created by combining many different libraries (and other
  components). In the Zero Install world, we have all versions of each library
  available at all times. The problem then is how to choose which versions to
  use.

  The injector solves this problem by selecting components to meet a program's
  requirements, according to a policy you give it. The injector finds out which
  versions are available, and downloads and runs the ones you choose.


pkgId: 8d3aa43c26e78e9b9b14b8ddece104cec6d94356
name: perl-Cache-Cache
arch: noarch
version: 1.05
epoch: 0
release: 1.fc6
summary: Generic cache interface and implementations
url: http://search.cpan.org/dist/Cache-Cache/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Cache-Cache-1.05-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Cache-Cache-1.05-1.fc6.noarch.rpm
checksum_type: sha
description:
  The Cache modules are designed to assist a developer in persisting data for a
  specified period of time.  Often these modules are used in web applications to
  store data locally to save repeated and redundant expensive calls to remote
  machines or databases.  People have also been known to use Cache::Cache for
  its straightforward interface in sharing data between runs of an application
  or invocations of a CGI-style script or simply as an easy to use abstraction
  of the filesystem or shared memory.


pkgId: 76ccf79c640912860a2dbb7d904af7412c706563
name: perl-Tie-EncryptedHash
arch: noarch
version: 1.21
epoch: 0
release: 3.fc7
summary: Hashes (and objects based on hashes) with encrypting fields
url: http://search.cpan.org/dist/Tie-EncryptedHash/
rpm_license: Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Tie-EncryptedHash-1.21-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Tie-EncryptedHash-1.21-3.fc7.noarch.rpm
checksum_type: sha
description:
  Tie::EncryptedHash augments Perl hash semantics to build secure, encrypting
  containers of data. Tie::EncryptedHash introduces special hash fields that are
  coupled with encrypt/decrypt routines to encrypt assignments at STORE() and
  decrypt retrievals at FETCH(). By design, encrypting fields are associated with
  keys that begin in single underscore. The remaining keyspace is used for
  accessing normal hash fields, which are retained without modification.

  While the password is set, a Tie::EncryptedHash behaves exactly like a standard
  Perl hash. This is its transparent mode of access. Encrypting and normal fields
  are identical in this mode. When password is deleted, encrypting fields are
  accessible only as ciphertext. This is Tie::EncryptedHash's opaque mode of
  access, optimized for serialization.

  Encryption is done with Crypt::CBC(3), which encrypts in the cipher block
  chaining mode with Blowfish, DES or IDEA. Tie::EncryptedHash uses Blowfish by
  default, but can be instructed to employ any cipher supported by Crypt::CBC(3).


pkgId: 5e27cc2da5ec910e7deb9eb06a21ce801c60e0ee
name: osgcal
arch: i386
version: 0.1.44
epoch: 0
release: 4.fc7
summary: Adapts OpenSceneGraph to use Cal3D
url: http://gna.org/projects/underware
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: osgcal-0.1.44-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/osgcal-0.1.44-4.fc7.i386.rpm
checksum_type: sha
description:
  osgCal is an adapter to use the Cal3D character animation library
  inside the OpenSceneGraph OpenGL based 3D scene graph.


pkgId: e63185e3ad5517d86c47cf31e52f0ee51e121dc5
name: libglade2
arch: i386
version: 2.6.0
epoch: 0
release: 3.fc7
summary: The libglade library for loading user interfaces
url: http://www.gnome.org
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: libglade2-2.6.0-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libglade2-2.6.0-3.fc7.i386.rpm
checksum_type: sha
description:
  Libglade is a small library that allows a program to load its user
  interface from am XML description at runtime. Libglade uses the XML
  file format used by the GLADE user interface builder GLADE, so
  libglade acts as an alternative to GLADE's code generation
  approach. Libglade also provides a simple interface for connecting
  handlers to the various signals in the interface (on platforms where
  the gmodule library works correctly, it is possible to connect all the
  handlers with a single function call). Once the interface has been
  instantiated, libglade gives no overhead, so other than the short
  initial interface loading time, there is no performance tradeoff.


pkgId: 997d996792d87c02276846dc81a70136a621f49e
name: mm-devel
arch: i386
version: 1.4.2
epoch: 0
release: 2.fc6
summary: Header files and libraries for mm development
url: http://www.ossp.org/pkg/lib/mm/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: mm-1.4.2-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mm-devel-1.4.2-2.fc6.i386.rpm
checksum_type: sha
description:
  The mm-devel package contains the header files and libraries needed
  to develop programs that use the mm library.


pkgId: a343ffa572a4b3c408ce594e5506b16a0c952c4e
name: mimedefang
arch: i386
version: 2.62
epoch: 0
release: 2.fc7
summary: E-Mail filtering framework using Sendmail's Milter interface
url: http://www.mimedefang.org/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Daemons
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: mimedefang-2.62-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/mimedefang-2.62-2.fc7.i386.rpm
checksum_type: sha
description:
  MIMEDefang is an e-mail filter program which works with Sendmail 8.12
  and later. It filters all e-mail messages sent via SMTP. MIMEDefang
  splits multi-part MIME messages into their components and potentially
  deletes or modifies the various parts. It then reassembles the parts
  back into an e-mail message and sends it on its way.

  There are some caveats you should be aware of before using MIMEDefang.
  MIMEDefang potentially alters e-mail messages. This breaks a "gentleman's
  agreement" that mail transfer agents do not modify message bodies. This
  could cause problems, for example, with encrypted or signed messages.


pkgId: 09493e52f53ad50e301022da633ead37e32c65bf
name: dircproxy
arch: i386
version: 1.2.0
epoch: 0
release: 0.5.beta2.fc7
summary: IRC proxy server
url: http://dircproxy.securiweb.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: dircproxy-1.2.0-0.5.beta2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dircproxy-1.2.0-0.5.beta2.fc7.i386.rpm
checksum_type: sha
description:
  dircproxy is an IRC proxy server ("bouncer") designed for people
  who use IRC from lots of different workstations or clients, but
  wish to remain connected and see what they missed while they
  were away. You connect to IRC through dircproxy, and it keeps
  you connected to the server, even after you detach your client
  from it. While you're detached, it logs channel and private
  messages as well as important events, and when you reattach
  it'll let you know what you missed.


pkgId: 81415c07cb0b8a4ffbeb1e5f457a1ee69a33d8fd
name: pipepanic
arch: i386
version: 0.1.3
epoch: 0
release: 2.fc7
summary: A pipe connecting game
url: http://www.users.waitrose.com/~thunor/pipepanic/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Amusements/Games
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: pipepanic-0.1.3-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/pipepanic-0.1.3-2.fc7.i386.rpm
checksum_type: sha
description:
  Pipepanic is a pipe connecting game using libSDL. Connect as many
  different shaped pipes together as possible within the time given.


pkgId: 5dce4294e5285876fa424325bb7088dcecd49af2
name: php-pear-Net-POP3
arch: noarch
version: 1.3.6
epoch: 0
release: 2.fc7
summary: Provides a POP3 class to access POP3 server
url: http://pear.php.net/package/Net_POP3
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: php-pear-Net-POP3-1.3.6-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/php-pear-Net-POP3-1.3.6-2.fc7.noarch.rpm
checksum_type: sha
description:
  Provides a POP3 class to access POP3 server. Support all POP3 commands
  including UIDL listings, APOP authentication, DIGEST-MD5 and CRAM-MD5 using
  optional Auth_SASL package.


pkgId: ca8b73ae4210f7ece9b4a17053aebbb4376d4510
name: python-nltk_lite
arch: noarch
version: 0.6.6
epoch: 0
release: 2.fc7
summary: Natural Language Toolkit
url: http://nltk.sf.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: python-nltk_lite-0.6.6-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-nltk_lite-0.6.6-2.fc7.noarch.rpm
checksum_type: sha
description:
  NLTK is a Python package that simplifies the construction of programs
  that process natural language; and defines standard interfaces between
  the different components of an NLP system.  It was designed primarily
  to help teach graduate and undergraduate students about computational
  linguistics; but it is also useful as a framework for implementing
  research projects.


pkgId: ddbc19d3e168569819e8255a9445f09e1f716911
name: mantis-config-httpd
arch: noarch
version: 1.0.7
epoch: 0
release: 1.fc7
summary: Mantis configuration for Apache httpd
url: http://www.mantisbt.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: mantis-1.0.7-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mantis-config-httpd-1.0.7-1.fc7.noarch.rpm
checksum_type: sha
description:
  Mantis is a web-based bugtracking system.
  This package contains configuration-files for Apache httpd 2.


pkgId: 054231ff6eb7ebc1b3a394711d1add4f9c012b38
name: trac
arch: noarch
version: 0.10.3.1
epoch: 0
release: 2.fc7
summary: Enhanced wiki and issue tracking system
url: http://trac.edgewall.com/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: trac-0.10.3.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/trac-0.10.3.1-2.fc7.noarch.rpm
checksum_type: sha
description:
  Trac is an integrated system for managing software projects, an
  enhanced wiki, a flexible web-based issue tracker, and an interface to
  the Subversion revision control system.  At the core of Trac lies an
  integrated wiki and issue/bug database. Using wiki markup, all objects
  managed by Trac can directly link to other issues/bug reports, code
  changesets, documentation and files.  Around the core lies other
  modules, providing additional features and tools to make software
  development more streamlined and effective.


pkgId: 1a171ab95acba922b2d89d2594533458234300e6
name: perl-Class-C3
arch: noarch
version: 0.14
epoch: 0
release: 1.fc6
summary: Pragma to use the C3 method resolution order algorithm
url: http://search.cpan.org/dist/Class-C3/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Class-C3-0.14-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Class-C3-0.14-1.fc6.noarch.rpm
checksum_type: sha
description:
  This is a pragma to change Perl 5's standard method resolution order from
  depth-first left-to-right (a.k.a - pre-order) to the more sophisticated C3
  method resolution order.


pkgId: d84e3914f8c7cc881a5411c72c389e39ed1c3b44
name: bluez-libs
arch: i386
version: 3.9
epoch: 0
release: 1.fc7
summary: Bluetooth libraries
url: http://www.bluez.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: bluez-libs-3.9-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/bluez-libs-3.9-1.fc7.i386.rpm
checksum_type: sha
description:
  Libraries for use in Bluetooth applications.

  The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., U.S.A.


pkgId: f6b6634d1faa7ddf03617ec00ca333b0af1458bb
name: xcompmgr
arch: i386
version: 1.1.3
epoch: 0
release: 6.fc6
summary: X11 composite manager
url: http://xapps.freedesktop.org
rpm_license: STL
rpm_vendor: Fedora Project
rpm_group: User Interface/X
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: xcompmgr-1.1.3-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xcompmgr-1.1.3-6.fc6.i386.rpm
checksum_type: sha
description:
  xcompmgr is a sample compositing manager for X servers supporting the XFIXES,
  DAMAGE, and COMPOSITE extensions. It enables basic eye-candy effects


pkgId: 938c8eb874e2fb82e280daf4d1a2ab4fa17b88a8
name: perl-IO-String
arch: noarch
version: 1.08
epoch: 0
release: 1.1.1
summary: Emulate file interface for in-core strings
url: http://search.cpan.org/dist/IO-String/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ia64-1.build.redhat.com
rpm_sourcerpm: perl-IO-String-1.08-1.1.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-IO-String-1.08-1.1.1.noarch.rpm
checksum_type: sha
description:
  The "IO::String" module provides the "IO::File" interface for in-core
  strings.  An "IO::String" object can be attached to a string, and
  makes it possible to use the normal file operations for reading or
  writing data, as well as for seeking to various locations of the
  string.  This is useful when you want to use a library module that
  only provides an interface to file handles on data that you have in a
  string variable.

  Note that perl-5.8 and better has built-in support for "in memory"
  files, which are set up by passing a reference instead of a filename
  to the open() call. The reason for using this module is that it makes
  the code backwards compatible with older versions of Perl.


pkgId: 3bc661397aca91b65c8722283997aaedb262eab5
name: libdockapp
arch: i386
version: 0.6.1
epoch: 0
release: 2.fc7
summary: DockApp Development Standard Library
url: http://solfertje.student.utwente.nl/~dalroi/libdockapp/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libdockapp-0.6.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libdockapp-0.6.1-2.fc7.i386.rpm
checksum_type: sha
description:
  LibDockApp is a library that provides a framework for developing dockapps.
  It provides functions and structures to define and display command-line
  options, create a dockable icon, handle events, etc.

  The goal of the library is to provide a simple, yet clean interface and
  standardize the ways in which dockapps are developed. A dockapp developed
  using libDockApp will automatically behave well under most window
  managers, and especially well under Window Maker.


pkgId: 215e573c6a69759e6fb81ae46bf39267d993ccde
name: perl-XML-XPathEngine
arch: noarch
version: 0.08
epoch: 0
release: 1.fc7
summary: Re-usable XPath engine for DOM-like trees
url: http://search.cpan.org/dist/XML-XPathEngine/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-XML-XPathEngine-0.08-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-XML-XPathEngine-0.08-1.fc7.noarch.rpm
checksum_type: sha
description:
  This module provides an XPath engine, that can be re-used by other
  module/classes that implement trees.


pkgId: 6fb2393d76beb9a2a8c9ef8b0eb4ecc377e26003
name: vino
arch: i386
version: 2.18.0
epoch: 0
release: 1.fc7
summary: A remote desktop system for GNOME
url: http://www.gnome.org
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: vino-2.18.0-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/vino-2.18.0-1.fc7.i386.rpm
checksum_type: sha
description:
  Vino is a VNC server for GNOME. It allows remote users to
  connect to a running GNOME session using VNC.


pkgId: cc4c723c262cb0d75f7d16d1bf6a85ea502fb2c0
name: perl-DateTime-Format-W3CDTF
arch: noarch
version: 0.04
epoch: 0
release: 2.fc7
summary: Parse and format W3CDTF datetime strings
url: http://search.cpan.org/dist/DateTime-Format-W3CDTF/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-DateTime-Format-W3CDTF-0.04-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-DateTime-Format-W3CDTF-0.04-2.fc7.noarch.rpm
checksum_type: sha
description:
  This module understands the W3CDTF date/time format, an ISO 8601 profile,
  defined at http://www.w3.org/TR/NOTE-datetime. This format as the native
  date format of RSS 1.0.


pkgId: 1da283027c03f34da1875780a75535b47040bc8c
name: ekg
arch: i386
version: 1.7
epoch: 0
release: 0.4.rc2.fc7
summary: A client compatible with Gadu-Gadu
url: http://ekg.chmurka.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ekg-1.7-0.4.rc2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ekg-1.7-0.4.rc2.fc7.i386.rpm
checksum_type: sha
description:
  EKG ("Eksperymentalny Klient Gadu-Gadu") is an open source gadu-gadu
  client for UNIX systems. Gadu-Gadu is an instant messaging program,
  very popular in Poland.

  EKG features include:
    - irssi-like ncurses interface
    - sending and receiving files
    - voice conversations
    - launching shell commands on certain events
    - reading input from pipe
    - python scripting support
    - speech synthesis (using an external program)
    - encryption support

  Please note that the program is not internationalized and all messages
  are in Polish (although the commands are in English).


pkgId: ff373d67243416129c17b725491aa8077cddb57d
name: ScientificPython
arch: i386
version: 2.6
epoch: 0
release: 7.fc7
summary: A collection of Python modules that are useful for scientific computing
url: http://dirac.cnrs-orleans.fr/ScientificPython/
rpm_license: CeCILL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ScientificPython-2.6-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ScientificPython-2.6-7.fc7.i386.rpm
checksum_type: sha
description:
  ScientificPython is a collection of Python modules that are useful for
  scientific computing.  In this collection you will find modules that cover
  basic geometry (vectors, tensors, transformations, vector and tensor
  fields), quaternions, automatic derivatives, (linear) interpolation,
  polynomials, elementary statistics, nonlinear least-squares fits, unit
  calculations, Fortran-compatible text formatting, 3D visualization via
  VRML, and two Tk widgets for simple line plots and 3D wireframe models.
  There are also interfaces to the netCDF library (portable structured
  binary files), to MPI (Message Passing Interface, message-based parallel
  programming), and to BSPlib (Bulk Synchronous Parallel programming)


pkgId: fc5444015ce66e9b103d676323a47ff330d1b2ca
name: tcpxtract
arch: i386
version: 1.0.1
epoch: 0
release: 7.fc7
summary: Tool for extracting files from network traffic
url: http://tcpxtract.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tcpxtract-1.0.1-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tcpxtract-1.0.1-7.fc7.i386.rpm
checksum_type: sha
description:
  tcpxtract is a tool for extracting files from network traffic based on
  file signatures.
  tcpxtract features the following:
   * Supports 26 popular file formats out-of-the-box. New formats can be
   added by simply editing its config file.
   * With a quick conversion, you can use your old Foremost config file
   with tcpxtract.
   * Custom written search algorithm is lightning fast and very scalable.
   * Search algorithm searches across packet boundries for total coverage
   and forensic quality.
   * Uses libpcap, a popular, portable and stable library for network data
   capture
   * Can be used against a live network or a tcpdump formatted capture file.


pkgId: 2c3cb372c19c32c708702f4f86a120803c4285f7
name: qof
arch: i386
version: 0.7.0
epoch: 0
release: 1.fc6
summary: Query engine library for C objects
url: http://qof.sf.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: qof-0.7.0-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qof-0.7.0-1.fc6.i386.rpm
checksum_type: sha
description:
  QOF - The Query Object Framework is a C library that provides a query engine
  to C applications.  This allows SQL-like queries to be performes on a
  collection of C/C++ objects (which act like SQL tables).

  QOF is an offshoot of the GnuCash engine, consisting of those pieces
  unrelated to accounting.  The Query Engine allows C/C++ applications
  to treat random collections of objects as if they were SQL tables,
  and perform table-join type queries across them.  In addition, the
  query engine can be backed by an actual database, so that instances
  of local objects can act as a 'cache' to a much larger SQL database.


pkgId: c99c0251e884c6bd9044e5527f27cabdfd4b91bf
name: php-pear-Structures-DataGrid-DataSource-Array
arch: noarch
version: 0.1.2
epoch: 0
release: 1.fc7
summary: DataSource driver using arrays
url: http://pear.php.net/package/Structures_DataGrid_DataSource_Array
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: php-pear-Structures-DataGrid-DataSource-Array-0.1.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/php-pear-Structures-DataGrid-DataSource-Array-0.1.2-1.fc7.noarch.rpm
checksum_type: sha
description:
  This is a DataSource driver for Structures_DataGrid using arrays. It is a
  base package for some other DataSource drivers like CSV or XML.


pkgId: 9916ae0913ef868fea0fdc53298d21bd24ae0af1
name: pcsc-tools
arch: i386
version: 1.4.8
epoch: 0
release: 1.fc7
summary: Tools to be used with smart cards and PC/SC
url: http://ludovic.rousseau.free.fr/softwares/pcsc-tools/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: pcsc-tools-1.4.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pcsc-tools-1.4.8-1.fc7.i386.rpm
checksum_type: sha
description:
  The pcsc-tools package contains some useful tools for a PC/SC user:
  pcsc_scan regularly scans connected PC/SC smart card readers and
  prints detected events, ATR_analysis analyzes smart card ATRs (Anwser
  To Reset), scriptor sends commands to a smart card, and gscriptor does
  that from a GTK user interface.


pkgId: e87e47a7d62f01c02363898277d5c4432a53ae6c
name: eclipse-gef
arch: i386
version: 3.2.1
epoch: 0
release: 4.fc7
summary: Graphical Editor Framework (GEF) plugin for Eclipse
url: http://www.eclipse.org/gef/
rpm_license: Eclipse Public License
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: eclipse-gef-3.2.1-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eclipse-gef-3.2.1-4.fc7.i386.rpm
checksum_type: sha
description:
  The eclipse-gef package contains Eclipse features and plugins that comprise
  the Graphical Editor Framework for Eclipse.


pkgId: d66fbc1ab657439278896f4c35944810d8981497
name: gutenprint
arch: i386
version: 5.0.0.99.1
epoch: 0
release: 3.fc7
summary: Printer Drivers Package
url: http://gimp-print.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Base
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: gutenprint-5.0.0.99.1-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/gutenprint-5.0.0.99.1-3.fc7.i386.rpm
checksum_type: sha
description:
  Gutenprint is a package of high quality printer drivers for Linux, BSD,
  Solaris, IRIX, and other UNIX-alike operating systems.
  Gutenprint was formerly called Gimp-Print.


pkgId: e286870b8ce05dfe825b213e4f1e08c2e611861c
name: kcemirror
arch: i386
version: 0.1.5
epoch: 0
release: 1.fc7
summary: Remote display control for PocketPC devices
url: http://synce.sourceforge.net/synce/kde/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: kcemirror-0.1.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kcemirror-0.1.5-1.fc7.i386.rpm
checksum_type: sha
description:
  KCEMirror shows on your Linux computer a window with the display of your
  Pocket PC device. You can control it remotely this way.


pkgId: 31bb4e48a5128de116b1b5691454cd00ab707139
name: openoffice.org-javafilter
arch: i386
version: 2.2.0
epoch: 1
release: 14.8
summary: Extra javafilter module for openoffice.org
url: http://www.openoffice.org/
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Applications/Productivity
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: openoffice.org-2.2.0-14.8.src.rpm
rpm_packager: Koji
location_href: Fedora/openoffice.org-javafilter-2.2.0-14.8.i386.rpm
checksum_type: sha
description:
  The javafilter module for openoffice.org, provides additional aportisdoc, pocket excel and pocket word import filters.


pkgId: fa597ee1d048ec0820a8aa31bf873e1407049a36
name: ruby-bsearch
arch: noarch
version: 1.5
epoch: 0
release: 1.fc7
summary: Binary search library for Ruby
url: http://0xcc.net/ruby-romkan/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: ruby-bsearch-1.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ruby-bsearch-1.5-1.fc7.noarch.rpm
checksum_type: sha
description:
  Ruby/Bsearch is a binary search library for Ruby. It can search the FIRST or
  LAST occurrence in an array with a condition given by a block.


pkgId: 6ed5d32d7df02f6471d300a86575afa0496b6c25
name: gnome-bluetooth-devel
arch: i386
version: 0.8.0
epoch: 0
release: 4.fc7
summary: Files for the development of applications, which use gnome-bluetooth
url: http://usefulinc.com/software/gnome-bluetooth
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: gnome-bluetooth-0.8.0-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gnome-bluetooth-devel-0.8.0-4.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the files for the development of applications,
  which will use gnome-bluetooth.


pkgId: 266a407aef446b6b643e9e46b29b9a7d4f28d715
name: siege
arch: i386
version: 2.66
epoch: 0
release: 1.fc7
summary: Siege is an http regression testing and benchmarking utility
url: http://www.joedog.org/JoeDog/Siege
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: siege-2.66-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/siege-2.66-1.fc7.i386.rpm
checksum_type: sha
description:
  Siege is an http regression testing and benchmarking utility.
  It was designed to let web developers measure the performance of their code
  under duress, to see how it will stand up to load on the internet.
  Siege supports basic authentication, cookies, HTTP and HTTPS protocols.
  It allows the user hit a web server with a configurable number of concurrent
  simulated users. Those users place the webserver "under siege."


pkgId: 88025d1450b98dccfb3cc21c31f9ff8bd339ec05
name: srecord
arch: i386
version: 1.33
epoch: 0
release: 1.fc7
summary: Manipulate EPROM load files
url: http://srecord.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Tools
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: srecord-1.33-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/srecord-1.33-1.fc7.i386.rpm
checksum_type: sha
description:
  The SRecord package is a collection of powerful tools for manipulating
  EPROM load files.

  * The SRecord package understands a number of file formats: Motorola
    S-Record, Intel, Tektronix, Binary.  These file formats may be read
    and written.  Also C array definitions, for output only.

  * The SRecord package has a number of tools: srec_cat for copying and
    and converting files, srec_cmp for comparing files and srec_info for
    printing summaries.

  * The SRecord package has a number for filters: checksum to add checksums
    to the data, crop to keep address ranges, exclude to remove address
    ranges, fill to plug holes in the data, length to insert the data
    length, maximum to insert the data address maximum, minimum to insert
    the data address minimum, offset to adjust addresses, and split for
    wide data buses and memory striping.

  More than one filter may be applied to each input file.  Different filters
  may be applied to each input file.  All filters may be applied to all
  file formats.


pkgId: 76d146d21b7bb5dd145e008a5ac6edef49ca7ddd
name: openarena
arch: i386
version: 0.6.0
epoch: 0
release: 4.fc7
summary: Open source first person shooter
url: http://openarena.ws/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: openarena-0.6.0-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/openarena-0.6.0-4.fc7.i386.rpm
checksum_type: sha
description:
  OpenArena is an open-source content package for Quake III Arena licensed under
  the GPL, effectively creating a free stand-alone game.


pkgId: 7930c4049928e8aba57870f9354ffcce8d6a6471
name: dbus-x11
arch: i386
version: 1.0.2
epoch: 0
release: 4.fc7
summary: X11-requiring add-ons for D-BUS
url: http://www.freedesktop.org/software/dbus/
rpm_license: AFL/GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: dbus-1.0.2-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dbus-x11-1.0.2-4.fc7.i386.rpm
checksum_type: sha
description:
  D-BUS contains some tools that require Xlib to be installed, those are
  in this separate package so server systems need not install X.


pkgId: 3c37503907fc12c186bade9f68fb6234f057f16c
name: cln
arch: i386
version: 1.1.13
epoch: 0
release: 2.fc6
summary: Class Library for Numbers
url: http://www.ginac.de/CLN/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: cln-1.1.13-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/cln-1.1.13-2.fc6.i386.rpm
checksum_type: sha
description:
  A collection of C++ math classes and functions, which are designed for
  memory and speed efficiency, and enable type safety and algebraic
  syntax.


pkgId: 7fe247159ed57abfaa0ea64202b7ad32f1e41fe1
name: wordtrans
arch: i386
version: 1.1
epoch: 1
release: 0.2.pre13.fc7
summary: Multi Language Word Translator for Linux
url: http://wordtrans.sourceforge.net
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Productivity
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: wordtrans-1.1-0.2.pre13.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/wordtrans-1.1-0.2.pre13.fc7.i386.rpm
checksum_type: sha
description:
  Wordtrans is a front-end for several dictionaries. It supports
  some dictionaries in plain text, dict servers and Babylon
  Translator's dictionaries.


pkgId: 11e20536216706938321c8604629cdb53252d2d4
name: smbldap-tools
arch: noarch
version: 0.9.2
epoch: 0
release: 5.fc7
summary: User and group administration tools for Samba/OpenLDAP
url: http://samba.idealx.org/index.en.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: smbldap-tools-0.9.2-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/smbldap-tools-0.9.2-5.fc7.noarch.rpm
checksum_type: sha
description:
  In conjunction with OpenLDAP and Samba-LDAP servers, this collection is useful
  to add, modify and delete users and groups, and to change Unix and Samba
  passwords. In those contexts they replace the system tools to manage users,
  groups and passwords.


pkgId: bc77de83631f2f67941bede667551b7ee087ed82
name: im-chooser
arch: i386
version: 0.3.4
epoch: 0
release: 1.fc7
summary: Desktop Input Method configuration tool
url: http://trac.tagoh.net/projects/im-chooser/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: im-chooser-0.3.4-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/im-chooser-0.3.4-1.fc7.i386.rpm
checksum_type: sha
description:
  im-chooser is an user GUI configuration tool to choose the Input Method
  to be used or disable Input Method usage on the desktop.


pkgId: f65fe9be9637c6be0fbc03aa4ea566a94308f218
name: aqbanking
arch: i386
version: 2.2.9
epoch: 0
release: 1
summary: A library for online banking functions and financial data import/export
url: http://www.aquamaniac.de/aqbanking/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: aqbanking-2.2.9-1.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/aqbanking-2.2.9-1.i386.rpm
checksum_type: sha
description:
  The intention of AqBanking is to provide a middle layer between the
  program and the various Online Banking libraries (e.g. AqHBCI). The
  first backend which is already supported is AqHBCI, a library which
  implements a client for the German HBCI (Home Banking Computer
  Interface) protocol. Additionally, Aqbanking provides various plugins
  to simplify import and export of financial data. Currently there are
  import plugins for the following formats: DTAUS (German financial
  format), SWIFT (MT940 and MT942).


pkgId: 9cd892b15317ed7826e344529aa3c873892f79f2
name: ruby-zoom
arch: i386
version: 0.2.2
epoch: 0
release: 2.fc7.1
summary: Ruby binding to ZOOM
url: http://ruby-zoom.rubyforge.org/
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: ruby-zoom-0.2.2-2.fc7.1.src.rpm
rpm_packager: Koji
location_href: Fedora/ruby-zoom-0.2.2-2.fc7.1.i386.rpm
checksum_type: sha
description:
  Ruby/ZOOM provides a Ruby binding to the Z39.50 Object-Orientation
  Model (ZOOM), an abstract object-oriented programming interface
  to a subset of the services specified by the Z39.50 standard,
  also known as the international standard ISO 23950.


pkgId: 9f02ba2309189769ec68ff5aff120719d8bafcf7
name: perl-WWW-Myspace
arch: noarch
version: 0.60
epoch: 0
release: 1.fc7
summary: Access your myspace.com profile in Perl!
url: http://search.cpan.org/dist/WWW-Myspace
rpm_license: Artistic or GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-WWW-Myspace-0.60-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-WWW-Myspace-0.60-1.fc7.noarch.rpm
checksum_type: sha
description:
  WWW::Myspace.pm provides methods to access your myspace.com account and
  functions automatically. It provides a simple interface for scripts to log in,
  access lists of friends, scan user's profiles, retreive profile data, send
  messages, and post comments.


pkgId: 0a59bc1ca7a25054bc1128d70d12595d7f1bec85
name: kdegraphics-extras
arch: i386
version: 3.5.5
epoch: 0
release: 1.fc7
summary: Extras for KDE graphics applications
url: http://www.kde.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: kdegraphics-extras-3.5.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kdegraphics-extras-3.5.5-1.fc7.i386.rpm
checksum_type: sha
description:
  Extra graphics applications for the K Desktop Environment, including:
  * kpovmodler
  * kuickshow (quick picture viewer)
  * OpenEXR kfile plugin


pkgId: 9fe50e0f2b18f3ca6d29f2907275a48915b56821
name: lineak-xosdplugin
arch: i386
version: 0.9
epoch: 0
release: 2.fc6
summary: Plugin for the lineakd keyboard daemon to enable XOSD support
url: http://lineak.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: lineak-xosdplugin-0.9-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lineak-xosdplugin-0.9-2.fc6.i386.rpm
checksum_type: sha
description:
  This plugin provides lineakd with the ability to use the XOSD library to print
  helpful onscreen display text when you perform an action (eg. a volume
  indicator to show you the current level).


pkgId: 4f0ad34804ac99918610bf7fa6d79f094d2407c7
name: koan
arch: noarch
version: 0.3.1
epoch: 0
release: 2.fc7
summary: Network provisioning tool for Xen and Bare Metal Machines
url: http://cobbler.et.redhat.com/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: koan-0.3.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/koan-0.3.1-2.fc7.noarch.rpm
checksum_type: sha
description:
  Koan stands for kickstart-over-a-network and allows for both
  network provisioning of new virtualized guests and destructive re-provisioning
  of any existing system.  For use with a boot-server configured with
  'cobbler'


pkgId: c4ae36004f28b752e1fd86271de9f42dda97c4d3
name: python-durus
arch: i386
version: 3.5
epoch: 0
release: 3.fc7
summary: A Python Object Database
url: http://www.mems-exchange.org/software/durus/
rpm_license: CNRI
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: python-durus-3.5-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-durus-3.5-3.fc7.i386.rpm
checksum_type: sha
description:
  Durus is a persistent object system for applications written in the Python
  programming language. It offers an easy way to use and maintain a consistent
  collection of object instances used by one or more processes. Access and change
  of a persistent instances is managed through a cached Connection instance which
  includes commit() and abort() methods so that changes are transactional.
  Durus is best suited to collections of less than a million instances with
  relatively stable state.


pkgId: 1eb77c16fd3c520ed62f282b30d3d19faf1a87d3
name: cfv
arch: noarch
version: 1.18.1
epoch: 0
release: 2.fc6
summary: A utility to test and create data verification files
url: http://cfv.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Archiving
rpm_buildhost: ppc1.fedora.phx.redhat.com
rpm_sourcerpm: cfv-1.18.1-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/cfv-1.18.1-2.fc6.noarch.rpm
checksum_type: sha
description:
  cfv is a utility to both test and create .sfv, .csv, .crc, .md5(sfv-like),
  md5sum, bsd md5, sha1sum, and .torrent files. These files are commonly used to
  ensure the correct retrieval or storage of data. It also has test-only support
  for PAR and PAR2 files


pkgId: c51f98036b31fd4a3b3da0b28e5c9634fccb874a
name: perl-XML-DOM-XPath
arch: noarch
version: 0.13
epoch: 0
release: 1.fc7
summary: Perl extension to add XPath support to XML::DOM, using XML::XPath engine
url: http://search.cpan.org/dist/XML-DOM-XPath/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-XML-DOM-XPath-0.13-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-XML-DOM-XPath-0.13-1.fc7.noarch.rpm
checksum_type: sha
description:
  XML::DOM::XPath allows you to use XML::XPath methods to query a DOM. This
      is often much easier than relying only on getElementsByTagName.


pkgId: c11f0cfc00ae2a4ae73d7df84e85eab3bd184942
name: perl-Net-SNMP
arch: noarch
version: 5.2.0
epoch: 0
release: 1.fc6
summary: Object oriented interface to SNMP
url: http://search.cpan.org/dist/Net-SNMP/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Net-SNMP-5.2.0-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Net-SNMP-5.2.0-1.fc6.noarch.rpm
checksum_type: sha
description:
  The Net::SNMP module implements an object oriented interface to the
  Simple Network Management Protocol.  Perl applications can use the
  module to retrieve or update information on a remote host using the
  SNMP protocol.  The module supports SNMP version-1, SNMP version-2c
  (Community-Based SNMPv2), and SNMP version-3.  The Net::SNMP module
  assumes that the user has a basic understanding of the Simple Network
  Management Protocol and related network management concepts.


pkgId: 2737048687978a8622e9de67d8a429ff3a9bfe78
name: openssl-perl
arch: i386
version: 0.9.8b
epoch: 0
release: 12.fc7
summary: Perl scripts provided with OpenSSL
url: http://www.openssl.org/
rpm_license: BSDish
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: openssl-0.9.8b-12.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/openssl-perl-0.9.8b-12.fc7.i386.rpm
checksum_type: sha
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-perl
  package provides Perl scripts for converting certificates and keys
  from other formats to the formats used by the OpenSSL toolkit.


pkgId: b9913b9de9f9e20820330ff5d3b076dfdf36dc42
name: anthy
arch: i386
version: 8706
epoch: 0
release: 2.fc7
summary: Japanese character set input library
url: http://sourceforge.jp/projects/anthy/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: anthy-8706-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/anthy-8706-2.fc7.i386.rpm
checksum_type: sha
description:
  Anthy provides the library to input Japanese on the applications, such as
  X applications and emacs. and the user dictionaries and the users information
  which is used for the conversion, is stored into their own home directory.
  So Anthy is secure than other conversion server.


pkgId: d7269d24c007325e9a44c0552ecf3fc593d256b3
name: wings
arch: i386
version: 0.98.36
epoch: 0
release: 1.fc7
summary: 3D Subdivision Modeler
url: http://www.wings3d.com
rpm_license: Distributable
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: wings-0.98.36-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/wings-0.98.36-1.fc7.i386.rpm
checksum_type: sha
description:
  Wings 3D is a subdivision modeler with an user interface that is easy
  to use for both beginners and advanced users (inspired by Nendo and
  Mirai from Izware).


pkgId: 85913551f75dbc956dd5d036d3b4bf55bbdcf461
name: kmod-sysprof
arch: i586
version: 1.0.8
epoch: 0
release: 1.2.6.21_1.3116.fc7
summary: sysprof kernel module(s)
url: http://www.daimi.au.dk/~sandmann/sysprof/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Kernel
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: sysprof-kmod-1.0.8-1.2.6.21_1.3116.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kmod-sysprof-1.0.8-1.2.6.21_1.3116.fc7.i586.rpm
checksum_type: sha
description:
  This package provides the sysprof kernel modules built for the Linux
  kernel 2.6.21-1.3116.fc7 for the i586 family of processors.


pkgId: 6b819da8a962ef39bba7a7264691ee352a49ff96
name: geda-symbols
arch: noarch
version: 20070216
epoch: 0
release: 1.fc7
summary: Electronic symbols for gEDA
url: http://www.geda.seul.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: geda-symbols-20070216-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/geda-symbols-20070216-1.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains a bunch of symbols of electronic devices
  used by gschem, the gEDA project schematic editor.


pkgId: f40e38eea66cc4a4db9da84f59783d01e6a18922
name: openct
arch: i386
version: 0.6.11
epoch: 0
release: 2.fc7
summary: Middleware framework for smart card terminals
url: http://www.opensc-project.org/openct/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: openct-0.6.11-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/openct-0.6.11-2.fc7.i386.rpm
checksum_type: sha
description:
  OpenCT implements drivers for several smart card readers.  It comes as
  driver in ifdhandler format for PC/SC-Lite, as CT-API driver, or as a
  small and lean middleware, so applications can use it with minimal
  overhead.  OpenCT also has a primitive mechanism to export smart card
  readers to remote machines via TCP/IP.


pkgId: 28d4a9f4d97289fc686bd1ed02218dd66f3df136
name: perl-MooseX-Params-Validate
arch: noarch
version: 0.02
epoch: 0
release: 1.fc7
summary: Extension of Params::Validate using Moose's types
url: http://search.cpan.org/dist/MooseX-Params-Validate/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-MooseX-Params-Validate-0.02-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-MooseX-Params-Validate-0.02-1.fc7.noarch.rpm
checksum_type: sha
description:
  This module fills a gap in Moose by adding method parameter validation to
  Moose. This is just one of many developing options, it should be considered
  the "official" one by any means though.


pkgId: b02dd131f0f354045d2bb3dcd7af86cecb98ef68
name: rekall
arch: i386
version: 2.4.5
epoch: 0
release: 5.fc7.3
summary: A KDE database front-end application
url: http://www.rekallrevealed.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: rekall-2.4.5-5.fc7.3.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rekall-2.4.5-5.fc7.3.i386.rpm
checksum_type: sha
description:
  Rekall is a database front-end, however, Rekall is not itself a
  database, and does not include a database. By this we mean that data
  is stored somewhere else in an SQL server, and Rekall is fundementally
  just a tool to extract, display and update that data (of course, it does
  lots more than that, it does forms and reports and scripting...). It is
  database agnostic, and does not have any preferred database (plugins are
  available for MySQL and PostgreSQL).


pkgId: e1a4f33fe84784d42ba13f6367d251e2d8ebdb1d
name: kernel-xen-2.6-doc
arch: noarch
version: 2.6.20
epoch: 0
release: 2925.9.fc7
summary: Various documentation bits found in the kernel source.
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: Documentation
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: kernel-xen-2.6-2.6.20-2925.9.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/kernel-xen-2.6-doc-2.6.20-2925.9.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains documentation files from the kernel
  source. Various bits of information about the Linux kernel and the
  device drivers shipped with it are documented in these files.

  You'll want to install this package if you need a reference to the
  options that can be passed to Linux kernel modules at load time.


pkgId: fee5ab51b7fd904718c78caef78ff423bff9990f
name: oprofile
arch: i386
version: 0.9.2
epoch: 0
release: 8.fc7
summary: System wide profiler
url: http://oprofile.sf.net
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/System
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: oprofile-0.9.2-8.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/oprofile-0.9.2-8.fc7.i386.rpm
checksum_type: sha
description:
  OProfile is a profiling system for systems running Linux. The
  profiling runs transparently during the background, and profile data
  can be collected at any time. OProfile makes use of the hardware performance
  counters provided on Intel P6, and AMD Athlon family processors, and can use
  the RTC for profiling on other x86 processor types.

  See the HTML documentation for further details.


pkgId: b600f5985e371326f46fd4dc68e0c67d3a6ab892
name: metacity-devel
arch: i386
version: 2.18.0
epoch: 0
release: 2.fc7
summary: Headers and libraries for metacity
url: http://ftp.gnome.org/pub/gnome/sources/metacity/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: metacity-2.18.0-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/metacity-devel-2.18.0-2.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the files needed for compiling programs using
  the metacity-private library. Note that you are not supposed to write
  programs using the metacity-private library, since it is a private
  API. This package exists purely for technical reasons.


pkgId: 690cf2838149f1dc93fd975a159073aed0d2f672
name: php-idn
arch: i386
version: 1.2
epoch: 0
release: 2.fc7
summary: PHP API for GNU LibIDN
url: http://php-idn.bayour.com/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: php-idn-1.2-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/php-idn-1.2-2.fc7.i386.rpm
checksum_type: sha
description:
  This is the PHP API for the GNU LibIDN software
  made by Simon Josefsson. It's intention is to
  have international characters in the DNS system.


pkgId: 143c64c5bf673aaedc1d77d53e5a7678316db397
name: gallery2-captcha
arch: noarch
version: 2.2
epoch: 0
release: 0.5.svn20070506.fc7
summary: Captcha module for Gallery 2
url: http://gallery.menalto.com
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Publishing
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: gallery2-2.2-0.5.svn20070506.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/gallery2-captcha-2.2-0.5.svn20070506.fc7.noarch.rpm
checksum_type: sha
description:
  Gallery 2 module - Prevents abuse by deterring automated bots with input
  that requires visual comprehension


pkgId: 67f1b4308e36f2c15271e3f9bb9247c7d0b00541
name: xscreensaver-base
arch: i386
version: 5.02
epoch: 1
release: 1.fc7.1
summary: A minimal installation of xscreensaver
url: http://www.jwz.org/xscreensaver/
rpm_license: BSD
rpm_vendor: Koji
rpm_group: Amusements/Graphics
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: xscreensaver-5.02-1.fc7.1.src.rpm
rpm_packager: Koji
location_href: Fedora/xscreensaver-base-5.02-1.fc7.1.i386.rpm
checksum_type: sha
description:
  A modular screen saver and locker for the X Window System.
  This package contains the bare minimum needed to blank and
  lock your screen.  The graphical display modes are the
  "xscreensaver-extras" and "xscreensaver-gl-extras" packages.


pkgId: f26e19305168d09967eaf33b4803ecbd49dbfafa
name: krbafs
arch: i386
version: 1.2.2
epoch: 0
release: 10.1
summary: A Kerberos to AFS bridging library, built against Kerberos 5.
rpm_license: Freely Distributable
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: krbafs-1.2.2-10.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/krbafs-1.2.2-10.1.i386.rpm
checksum_type: sha
description:
  This package contains the krbafs shared library, which allows programs
  to obtain AFS network filesystem tokens using Kerberos IV credentials,
  without having to link with official AFS libraries which may not be
  available for a given platform.


pkgId: 73d0963d1a01538669d79e5162032d25077b061a
name: python-kiwi
arch: noarch
version: 1.9.14
epoch: 0
release: 1.fc7
summary: Framework for Python GUI applications
url: http://www.async.com.br/projects/kiwi/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: python-kiwi-1.9.14-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-kiwi-1.9.14-1.fc7.noarch.rpm
checksum_type: sha
description:
  Kiwi consists of a set of classes and wrappers for PyGTK that were
  developed to provide a sort of framework for applications. Fully
  object-oriented, and roughly Smalltalk's MVC, Kiwi provides a simple,
  practical way to build forms, windows and widgets that transparently
  access and display your object data.


pkgId: 98ff2e621279fa032f0c1394c7e431820b17e140
name: perl-URI
arch: noarch
version: 1.35
epoch: 0
release: 3
summary: A Perl module implementing URI parsing and manipulation
url: http://search.cpan.org/dist/URI/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: natasha.build.redhat.com
rpm_sourcerpm: perl-URI-1.35-3.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-URI-1.35-3.noarch.rpm
checksum_type: sha
description:
  This module implements the URI class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).


pkgId: b8b3290bad8b182635623563702cd4ccfda50df9
name: sendmail-doc
arch: i386
version: 8.14.1
epoch: 0
release: 2
summary: Documentation about the Sendmail Mail Transport Agent program
url: http://www.sendmail.org/
rpm_license: Sendmail
rpm_vendor: Red Hat, Inc.
rpm_group: Documentation
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: sendmail-8.14.1-2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/sendmail-doc-8.14.1-2.i386.rpm
checksum_type: sha
description:
  The sendmail-doc package contains documentation about the Sendmail
  Mail Transport Agent (MTA) program, including release notes, the
  Sendmail FAQ, and a few papers written about Sendmail. The papers are
  provided in PostScript(TM) and troff formats.


pkgId: a769a269927e945c4893043282ac3fe047c0fbf4
name: dev86
arch: i386
version: 0.16.17
epoch: 0
release: 4.fc7
summary: A real mode 80x86 assembler and linker
url: http://homepage.ntlworld.com/robert.debath/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: dev86-0.16.17-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dev86-0.16.17-4.fc7.i386.rpm
checksum_type: sha
description:
  The dev86 package provides an assembler and linker for real mode 80x86
  instructions. You'll need to have this package installed in order to
  build programs that run in real mode, including LILO and the kernel's
  bootstrapping code, from their sources.

  You should install dev86 if you intend to build programs that run in real
  mode from their source code.


pkgId: e0f9384519e5fa259888968f4b89505bee6a6253
name: xscreensaver-extras
arch: i386
version: 5.02
epoch: 1
release: 1.fc7.1
summary: An enhanced set of screensavers
url: http://www.jwz.org/xscreensaver/
rpm_license: BSD
rpm_vendor: Koji
rpm_group: Amusements/Graphics
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: xscreensaver-5.02-1.fc7.1.src.rpm
rpm_packager: Koji
location_href: Fedora/xscreensaver-extras-5.02-1.fc7.1.i386.rpm
checksum_type: sha
description:
  A modular screen saver and locker for the X Window System.
  This package contains a variety of graphical screen savers for
  your mind-numbing, ambition-eroding, time-wasting, hypnotized
  viewing pleasure.


pkgId: 815c4d95ae04d92e296c62f487e99d408663e2f9
name: perl-Sys-SigAction
arch: noarch
version: 0.10
epoch: 0
release: 1.fc7
summary: Perl extension for Consistent Signal Handling
url: http://search.cpan.org/dist/Sys-SigAction/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Sys-SigAction-0.10-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Sys-SigAction-0.10-1.fc7.noarch.rpm
checksum_type: sha
description:
  Sys::SigAction provides EASY access to POSIX::sigaction() for signal
  handling on systems that support sigaction().
  It is hoped that with the use of this module, your signal handling
  behavior can be coded in a way that does not change from one perl
  version to the next, and that sigaction() will be easier for you to use.


pkgId: 7d0689ecb2aeb7bbf602ec4710da5e475f4730d1
name: yum-updateonboot
arch: noarch
version: 1.1.4
epoch: 0
release: 1.fc7
summary: Run yum update on system boot
url: http://linux.duke.edu/yum/download/yum-utils/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Base
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: yum-utils-1.1.4-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/yum-updateonboot-1.1.4-1.fc7.noarch.rpm
checksum_type: sha
description:
  Runs yum update on system boot. This allows machines that have been turned
  off for an extended amount of time to become secure immediately, instead of
  waiting until the next early morning cron job.


pkgId: 3d42cafbe475b218cda7344d46660b6a5b7d449a
name: autotrace
arch: i386
version: 0.31.1
epoch: 0
release: 14.fc6
summary: Utility for converting bitmaps to vector graphics
url: http://autotrace.sourceforge.net/
rpm_license: GPL/LGPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer3.fedora.redhat.com
rpm_sourcerpm: autotrace-0.31.1-14.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/autotrace-0.31.1-14.fc6.i386.rpm
checksum_type: sha
description:
  AutoTrace is a program similar to CorelTrace or Adobe Streamline for
  converting bitmaps to vector graphics.

  Supported input formats include BMP, TGA, PNM, PPM, and any format
  supported by ImageMagick, whereas output can be produced in
  Postscript, SVG, xfig, SWF, and others.


pkgId: b835425e64e1a516247fb51f0a00233aa5782080
name: linuxwacom-devel
arch: i386
version: 0.7.4_1
epoch: 0
release: 2.1
summary: linuxwacom developmental libraries and header files
url: http://linuxwacom.sourceforge.net
rpm_license: GPL/X11
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: linuxwacom-0.7.4_1-2.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/linuxwacom-devel-0.7.4_1-2.1.i386.rpm
checksum_type: sha
description:
  Developmental libraries and header files required for developing or
  compiling applications for manipulating settings for Wacom tablets.


pkgId: 4404fc6865411c643a904aa4023a3574de508572
name: perl-Math-Spline
arch: noarch
version: 0.01
epoch: 0
release: 1.fc7
summary: Cubic Spline Interpolation of data
url: http://search.cpan.org/dist/Math-Spline/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Math-Spline-0.01-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Math-Spline-0.01-1.fc7.noarch.rpm
checksum_type: sha
description:
  This package provides cubic spline interpolation of numeric data. The data
  is passed as references to two arrays containing the x and y ordinates. It
  may be used as an exporter of the numerical functions or, more easily as a
  class module.


pkgId: 7c488ddd58b7089b05396ecbce7ed9152029d55e
name: bcfg2
arch: noarch
version: 0.9.3
epoch: 0
release: 2.fc7
summary: Configuration management system
url: http://trac.mcs.anl.gov/projects/bcfg2
rpm_license: BSD
rpm_vendor: Koji
rpm_group: Applications/System
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: bcfg2-0.9.3-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/bcfg2-0.9.3-2.fc7.noarch.rpm
checksum_type: sha
description:
  Bcfg2 helps system administrators produce a consistent, reproducible,
  and verifiable description of their environment, and offers
  visualization and reporting tools to aid in day-to-day administrative
  tasks. It is the fifth generation of configuration management tools
  developed in the Mathematics and Computer Science Division of Argonne
  National Laboratory.

  It is based on an operational model in which the specification can be
  used to validate and optionally change the state of clients, but in a
  feature unique to bcfg2 the client's response to the specification can
  also be used to assess the completeness of the specification. Using
  this feature, bcfg2 provides an objective measure of how good a job an
  administrator has done in specifying the configuration of client
  systems. Bcfg2 is therefore built to help administrators construct an
  accurate, comprehensive specification.

  Bcfg2 has been designed from the ground up to support gentle
  reconciliation between the specification and current client states. It
  is designed to gracefully cope with manual system modifications.

  Finally, due to the rapid pace of updates on modern networks, client
  systems are constantly changing; if required in your environment,
  Bcfg2 can enable the construction of complex change management and
  deployment strategies.


pkgId: 8a026a516c0e51497235044b76c536fda366d0d3
name: perl-IO-Digest
arch: noarch
version: 0.10
epoch: 0
release: 4.fc6
summary: Calculate digests while reading or writing
url: http://search.cpan.org/dist/IO-Digest/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-IO-Digest-0.10-4.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-IO-Digest-0.10-4.fc6.noarch.rpm
checksum_type: sha
description:
  This module allows you to calculate digests while reading or writing file
  handles. This avoids the case you need to reread the same content to
  compute the digests after written a file.


pkgId: 277e021ff5d88c3908eb86989e0ca3ee8efb1ec9
name: expect-devel
arch: i386
version: 5.43.0
epoch: 0
release: 8
summary: A program-script interaction and testing utility
url: http://expect.nist.gov/
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: expect-5.43.0-8.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/expect-devel-5.43.0-8.i386.rpm
checksum_type: sha
description:
  Expect is a tcl application for automating and testing
  interactive applications such as telnet, ftp, passwd, fsck,
  rlogin, tip, etc. Expect makes it easy for a script to
  control another program and interact with it.

  This package contains development files for the expect library.


pkgId: 06ebe1cc8bd094df62e1107e86a0f53a81a9a6f9
name: worminator-data
arch: noarch
version: 3.0R2.1
epoch: 0
release: 3.fc6
summary: Data for worminator the game
url: http://sourceforge.net/projects/worminator/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: ppc3.fedora.phx.redhat.com
rpm_sourcerpm: worminator-data-3.0R2.1-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/worminator-data-3.0R2.1-3.fc6.noarch.rpm
checksum_type: sha
description:
  Data for worminator the game where you play as The Worminator and fight your
  way through many levels of madness and mayhem. Worminator features nine unique
  weapons, visible character damage, full screen scrolling, sound and music, and
  much more!


pkgId: 4ec243740eb578dd35be4882313a2f40b1c394fc
name: fnfx
arch: i386
version: 0.3
epoch: 0
release: 8.fc6
summary: Hotkey functions for Toshiba laptops
url: http://fnfx.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: fnfx-0.3-8.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fnfx-0.3-8.fc6.i386.rpm
checksum_type: sha
description:
  FnFX enables owners of Toshiba laptops to change the LCD brightness,
  control, the internal fan and use the special keys on their keyboard
  (Fn-x combinations, hot-keys). The internal functions will give the
  possibility to map the Fn-Keys to functions like volume up/down, mute,
  suspend to disk, suspend to ram and switch LCD/CRT/TV-out. These
  functions heavily depend on the system and/or kernel configuration.


pkgId: b6ef37c4896ea1b4c6fd209e6a5054d0c33a9781
name: perl-Statistics-Descriptive
arch: noarch
version: 2.6
epoch: 0
release: 2.fc6
summary: Perl module of basic descriptive statistical functions
url: http://search.cpan.org/dist/Statistics-Descriptive/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: perl-Statistics-Descriptive-2.6-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Statistics-Descriptive-2.6-2.fc6.noarch.rpm
checksum_type: sha
description:
  This module provides basic functions used in descriptive
  statistics. It has an object oriented design and supports two
  different types of data storage and calculation objects: sparse and
  full. With the sparse method, none of the data is stored and only a
  few statistical measures are available. Using the full method, the
  entire data set is retained and additional functions are available.


pkgId: 8bbedcef1f151cd0184635c8c2f44c1d6b714f06
name: lvm2
arch: i386
version: 2.02.24
epoch: 0
release: 1.fc7
summary: Userland logical volume management tools
url: http://sources.redhat.com/lvm2
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: lvm2-2.02.24-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lvm2-2.02.24-1.fc7.i386.rpm
checksum_type: sha
description:
  LVM2 includes all of the support for handling read/write operations on
  physical volumes (hard disks, RAID-Systems, magneto optical, etc.,
  multiple devices (MD), see mdadd(8) or even loop devices, see
  losetup(8)), creating volume groups (kind of virtual disks) from one
  or more physical volumes and creating one or more logical volumes
  (kind of logical partitions) in volume groups.


pkgId: 34bb12a2304bb7005e147bd56fe6f9e677bad6ac
name: enemies-of-carlotta
arch: noarch
version: 1.2.4
epoch: 0
release: 1.fc7
summary: A simple mailing list manager
url: http://liw.iki.fi/liw/eoc
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: enemies-of-carlotta-1.2.4-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/enemies-of-carlotta-1.2.4-1.fc7.noarch.rpm
checksum_type: sha
description:
  Enemies of Carlotta is a simple mailing list manager. It tries
  to mimick the ezmlm software somewhat, but is written completely
  from scratch, in Python.


pkgId: 6ccdc42506b7855f2ffc831ea7b134ec68c8984f
name: pidgin-guifications
arch: i386
version: 2.14
epoch: 0
release: 2.fc7
summary: Guifications Plugin for Pidgin
url: http://plugins.guifications.org/trac/wiki/Guifications
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Internet
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: pidgin-guifications-2.14-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/pidgin-guifications-2.14-2.fc7.i386.rpm
checksum_type: sha
description:
  Guifications is a graphical notification plugin for the open source
  instant messaging client Pidgin.


pkgId: ed775bd6d835c2718d58664bad309915006be1c0
name: methane
arch: i386
version: 1.4.7
epoch: 0
release: 1.fc7
summary: Super Methane Brothers
url: http://methane.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: methane-1.4.7-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/methane-1.4.7-1.fc7.i386.rpm
checksum_type: sha
description:
  Super Methane Brothers is a platform game converted from the Amiga by
  its original author. It is very similar to the Taito game "Bubble
  Bobble".


pkgId: e1d992f1628a89c6f74a4065d827d3e469456e73
name: e2tools
arch: i386
version: 0.0.16
epoch: 0
release: 5.fc7
summary: Manipulate files in unmounted ext2/ext3 filesystems
url: http://home.earthlink.net/~k_sheff/sw/e2tools/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: e2tools-0.0.16-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/e2tools-0.0.16-5.fc7.i386.rpm
checksum_type: sha
description:
  A simple set of utilities to read, write, and manipulate files in an
  ext2/ext3 filesystem directly using the ext2fs library. This works

    - without root access
    - without the filesystem being mounted
    - without kernel ext2/ext3 support

  The utilities are: e2cp e2ln e2ls e2mkdir e2mv e2rm e2tail


pkgId: 3b819cf69a5f799f87721d89669cb0cb76ea3e43
name: petitboot
arch: i386
version: 0.0.1
epoch: 0
release: 5.fc7
summary: Graphical kexec-based bootloader, originally for PlayStation 3
url: http://ozlabs.org/~jk/projects/petitboot/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: petitboot-0.0.1-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/petitboot-0.0.1-5.fc7.i386.rpm
checksum_type: sha
description:
  Petitboot is a graphical bootloader for the PlayStation 3. It's based
  on the existing kboot project, plus the twin windowing system for the
  GUI.


pkgId: 7304bc928706a27a6383a5b7eae3cc7cd77cf811
name: tor-core
arch: i386
version: 0.1.2.13
epoch: 0
release: 0.fc7
summary: Core programs for tor
url: http://tor.eff.org
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tor-0.1.2.13-0.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tor-core-0.1.2.13-0.fc7.i386.rpm
checksum_type: sha
description:
  Tor is a connection-based low-latency anonymous communication system.

  This package provides the "tor" program, which serves as both a client
  and a relay node.


pkgId: dc42ccc73dba6170b79531d3ac7ca309a7fb97f1
name: libgtksourceviewmm-devel
arch: i386
version: 0.3.0
epoch: 0
release: 2.fc7
summary: Development files for libgtksourceviewmm
url: http://home.gna.org/gtksourceviewmm/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: libgtksourceviewmm-0.3.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgtksourceviewmm-devel-0.3.0-2.fc7.i386.rpm
checksum_type: sha
description:
  The libgtksourceviewmm-devel package contains libraries and header files for
  developing applications that use libgtksourceviewmm.


pkgId: ecf1acb930c1b513b9b503a07d472f3dc061e796
name: netpanzer
arch: i386
version: 0.8.1
epoch: 0
release: 1.fc7
summary: An Online Multiplayer Tactical Warfare Game
url: http://netpanzer.berlios.de
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: netpanzer-0.8.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/netpanzer-0.8.1-1.fc7.i386.rpm
checksum_type: sha
description:
  netPanzer is an online multiplayer tactical warfare game designed for FAST
  ACTION combat. Gameplay concentrates on the core -- no resource management is
  needed. The game is based on quick tactical action and unit management in
  real-time. Battles progress quickly and constantly as destroyed players respawn
  with a set of new units. Players can join or leave multiplayer games at any
  time.


pkgId: 69cdd7f6af7b6b502163b6a5d5cae4d40b63e45b
name: zlib-devel
arch: i386
version: 1.2.3
epoch: 0
release: 10.fc7
summary: Header files and libraries for Zlib development
url: http://www.gzip.org/zlib/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: zlib-1.2.3-10.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/zlib-devel-1.2.3-10.fc7.i386.rpm
checksum_type: sha
description:
  The zlib-devel package contains the header files and libraries needed
  to develop programs that use the zlib compression and decompression
  library.


pkgId: 66cae01fef2cca39a044ce45df2b637ae043f8ed
name: perl-Class-Inspector
arch: noarch
version: 1.16
epoch: 0
release: 3.fc7
summary: Get information about a class and its structure
url: http://search.cpan.org/dist/Class-Inspector/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Class-Inspector-1.16-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Class-Inspector-1.16-3.fc7.noarch.rpm
checksum_type: sha
description:
  Class::Inspector allows you to get information about a loaded class.
  Most or all of this information can be found in other ways, but they aren't
  always very friendly, and usually involve a relatively high level of Perl
  wizardry, or strange and unusual looking code. Class::Inspector attempts to
  provide an easier, more friendly interface to this information.


pkgId: 2597d8a9ff402a09c55507ca94b6a7636c17a364
name: inews
arch: i386
version: 2.4.3
epoch: 0
release: 6.fc6
summary: Sends Usenet articles to a local news server for distribution.
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: inn-2.4.3-6.fc6.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/inews-2.4.3-6.fc6.i386.rpm
checksum_type: sha
description:
  The inews program is used by some news programs (for example, inn and
  trn) to post Usenet news articles to local news servers.  Inews reads
  an article from a file or standard input, adds headers, performs some
  consistency checks and then sends the article to the local news server
  specified in the inn.conf file.

  Install inews if you need a program for posting Usenet articles to
  local news servers.


pkgId: 7abe075ecaf1931dde04ec1a1987c6a1ab5089e2
name: lksctp-tools-devel
arch: i386
version: 1.0.6
epoch: 0
release: 3.fc7
summary: Development files for lksctp-tools
url: http://lksctp.sourceforge.net
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: lksctp-tools-1.0.6-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lksctp-tools-devel-1.0.6-3.fc7.i386.rpm
checksum_type: sha
description:
  Development files for lksctp-tools which include man pages, header files,
  static libraries, symlinks to dynamic libraries and some tutorial source code.


pkgId: 2871d6ddcc95cff0e4ea01afc5979c1e80334977
name: gutenprint-extras
arch: i386
version: 5.0.0.99.1
epoch: 0
release: 3.fc7
summary: Sample test pattern generator for gutenprint-devel
url: http://gimp-print.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Publishing
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: gutenprint-5.0.0.99.1-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/gutenprint-extras-5.0.0.99.1-3.fc7.i386.rpm
checksum_type: sha
description:
  This package contains test pattern generator and the sample test pattern
  that is used by gutenprint-devel package.


pkgId: 3aa40649cc01b153f5f2f83403ed03c007174d2f
name: kernel-PAE-debug-devel
arch: i686
version: 2.6.21
epoch: 0
release: 1.3194.fc7
summary: Development package for building kernel modules to match the kernel.
rpm_license: GPLv2
rpm_vendor: Koji
rpm_group: System Environment/Kernel
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: kernel-2.6.21-1.3194.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/kernel-PAE-debug-devel-2.6.21-1.3194.fc7.i686.rpm
checksum_type: sha
description:
  This package provides kernel headers and makefiles sufficient to build modules
  against the kernel package.


pkgId: de060c2d181edaeeed88ef13fa6571d54c226f6e
name: arj
arch: i386
version: 3.10.22
epoch: 0
release: 1.fc6
summary: Archiver for .arj files
url: http://arj.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Archiving
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: arj-3.10.22-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/arj-3.10.22-1.fc6.i386.rpm
checksum_type: sha
description:
  This package is an open source version of the arj archiver.  This
  version has been created with the intent to preserve maximum
  compatibility and retain the feature set of original ARJ archiver as
  provided by ARJ Software, Inc.


pkgId: 9e0182509bcabe633053ac4b87724f5851654fd2
name: licq-kde
arch: i386
version: 1.3.4
epoch: 0
release: 6.fc7
summary: Licq plugin for KDE
url: http://www.licq.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: licq-1.3.4-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/licq-kde-1.3.4-6.fc7.i386.rpm
checksum_type: sha
description:
  This is the KDE based GUI plugin for Licq.
  To run this plugin, you will have to
  issue the command "licq -p kde-gui"


pkgId: 4e41ae118516b3ef59f8f4dcb34b23d064ae8175
name: blogtk
arch: noarch
version: 1.1
epoch: 0
release: 8.fc7
summary: GNOME application for editing/maintaining blogs
url: http://blogtk.sourceforge.net
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: blogtk-1.1-8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/blogtk-1.1-8.fc7.noarch.rpm
checksum_type: sha
description:
  BloGTK is a weblog posting client written in Python for any platform that
  supports Python and the GTK widget set. BloGTK allows you to connect to your
  weblog with XML-RPC and create new posts.


pkgId: de3b188191f9757f9f862216f7ffc2749a7945d7
name: puppet-server
arch: noarch
version: 0.22.4
epoch: 0
release: 1.fc7
summary: Server for the puppet system management tool
url: http://reductivelabs.com/projects/puppet/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Base
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: puppet-0.22.4-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/puppet-server-0.22.4-1.fc7.noarch.rpm
checksum_type: sha
description:
  Provides the central puppet server daemon which provides manifests to clients.
  The server can also function as a certificate authority and file server.


pkgId: 276a46496b5e86bec73466820076e5e9ca2a9cca
name: pyfribidi
arch: i386
version: 0.6.0
epoch: 0
release: 3.fc7
summary: A Python binding for GNU FriBidi
url: http://pyfribidi.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: pyfribidi-0.6.0-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pyfribidi-0.6.0-3.fc7.i386.rpm
checksum_type: sha
description:
  PyFriBidi is a simple Python binding for FriBidi, providing an
  implementation of The Unicode Bidirectional Algorithm in Python.


pkgId: ab4b384c625df28b45fcbc40a8603a71030918a2
name: python-smbpasswd
arch: i386
version: 1.0.1
epoch: 0
release: 5.fc7
summary: Python SMB Password Hash Generator Module
url: http://barryp.org/software/py-smbpasswd
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: python-smbpasswd-1.0.1-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-smbpasswd-1.0.1-5.fc7.i386.rpm
checksum_type: sha
description:
  This package contains a python module, which is able to generate LANMAN and
  NT password hashes suiteable to us with Samba.


pkgId: 2f84a774773e95d5047ea5b5aa67349f3f970adf
name: translate-toolkit
arch: noarch
version: 0.10.1
epoch: 0
release: 4.fc7
summary: A collection of tools to assist software localization
url: http://translate.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: translate-toolkit-0.10.1-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/translate-toolkit-0.10.1-4.fc7.noarch.rpm
checksum_type: sha
description:
  The Translate Toolkit includes programs to convert various localization
  formats to the common gettext PO format and vice versa, and programs to
  check and manage PO files. Also part of the package are programs to create
  word counts, merge translations, and perform various checks on PO files.


pkgId: ad91ea44215abc8bcfacdf8c734992d97ac9494a
name: exim-mon
arch: i386
version: 4.66
epoch: 0
release: 3.fc7
summary: X11 monitor application for exim
url: http://www.exim.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: exim-4.66-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/exim-mon-4.66-3.fc7.i386.rpm
checksum_type: sha
description:
  The Exim Monitor is an optional supplement to the Exim package. It
  displays information about Exim's processing in an X window, and an
  administrator can perform a number of control actions from the window
  interface.


pkgId: 26ff9de3ce4edd8815c5dd007a50f3afc87f84a9
name: libdockapp-devel
arch: i386
version: 0.6.1
epoch: 0
release: 2.fc7
summary: Development files for libdockapp
url: http://solfertje.student.utwente.nl/~dalroi/libdockapp/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libdockapp-0.6.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libdockapp-devel-0.6.1-2.fc7.i386.rpm
checksum_type: sha
description:
  The libdockapp-devel package contains libraries and header files for
  developing applications that use libdockapp.


pkgId: 18b25736609c9968e0a9aa3daa37557fa5925c97
name: usermode
arch: i386
version: 1.91.1
epoch: 0
release: 1
summary: Tools for certain user account management tasks
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: usermode-1.91.1-1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/usermode-1.91.1-1.i386.rpm
checksum_type: sha
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: 89cea8149b93c93aa73e4d1fefe2c072ddbd1948
name: pyflakes
arch: noarch
version: 0.2.1
epoch: 0
release: 3.fc7
summary: A Lint-like tool for Python
url: http://divmod.org/trac/wiki/DivmodPyflakes
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: pyflakes-0.2.1-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pyflakes-0.2.1-3.fc7.noarch.rpm
checksum_type: sha
description:
  PyFlakes is a Lint-like tool for Python, like PyChecker. It is focused
  on identifying common errors quickly without executing Python
  code. Its primary advantage over PyChecker is that it is fast. You
  don't have to sit around for minutes waiting for the checker to run;
  it runs on most large projects in only a few seconds.


pkgId: 0e9ea4f0049dd1a7542fd6c27dba4d92f995577c
name: python-twisted-lore
arch: i386
version: 0.2.0
epoch: 0
release: 4.fc7
summary: Twisted documentation system
url: http://www.twistedmatrix.com
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: python-twisted-lore-0.2.0-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-twisted-lore-0.2.0-4.fc7.i386.rpm
checksum_type: sha
description:
  Twisted is an event-based framework for internet applications.

  Lore is a complete documentation system based on XHTML and can generate
  documentation into other formats such as PDF, HTML.


pkgId: 0feaebc81a7eb512b18a351c8aa93e464c6ee39e
name: libextractor-plugins-thumbnailqt
arch: i386
version: 0.5.17a
epoch: 0
release: 1.fc7
summary: The 'thumbnailqt' libextractor plugin
url: http://gnunet.org/libextractor/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libextractor-0.5.17a-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libextractor-plugins-thumbnailqt-0.5.17a-1.fc7.i386.rpm
checksum_type: sha
description:
  libextractor is a simple library for keyword extraction.  libextractor
  does not support all formats but supports a simple plugging mechanism
  such that you can quickly add extractors for additional formats, even
  without recompiling libextractor.

  This package ships the 'thumbnailqt' plugin.


pkgId: 5f5d1430e8d82845c562cc0161ffb82494e1423b
name: tagsoup
arch: i386
version: 1.0.1
epoch: 0
release: 1jpp.1.fc7
summary: A SAX-compliant HTML parser written in Java
url: http://home.ccil.org/~cowan/XML/tagsoup/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Text Processing/Markup/XML
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tagsoup-1.0.1-1jpp.1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tagsoup-1.0.1-1jpp.1.fc7.i386.rpm
checksum_type: sha
description:
  TagSoup is a SAX-compliant parser written in Java that, instead of
  parsing well-formed or valid XML, parses HTML as it is found in the wild: nasty
  and brutish, though quite often far from short. TagSoup is designed for people
  who have to process this stuff using some semblance of a rational application
  design. By providing a SAX interface, it allows standard XML tools to be
  applied to even the worst HTML.


pkgId: 63470116e894fe7d3a8e96bfbceafc3cd9d3bac1
name: viaideinfo
arch: i386
version: 0.5
epoch: 0
release: 1.fc7
summary: Displays the information of installed VIA IDE controllers
url: http://reactivated.net/software/viaideinfo
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: viaideinfo-0.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/viaideinfo-0.5-1.fc7.i386.rpm
checksum_type: sha
description:
  This command-line application identifies VIA IDE controllers installed in the
  computer, and displays various information/statistics regarding these. This
  does not depend on the via82cxxx kernel IDE driver, and will work regardless of
  whether it is present or not. All this information used to be available through
  /proc/ide/via; however this file was removed in Linux 2.6.15 to reduce the
  complexity of the IDE driver. Since it performs some basic port I/O, it must be
  run as root.

  Supported devices:
  	VT82C576, VT82C586, VT82C586A, VT82C586B, VT82C596A, VT82C596B,
  	VT82C686, VT82C686A, VT82C686B, VT8231, VT8233, VT8233C, VT8233A,
  	VT8235, VT8237, VT8237A, VT8251, VT6410, VT8237S, CX700


pkgId: 439e0fabb1760e49b76997aa5a6c0b0cdfc93618
name: kdesdk
arch: i386
version: 3.5.6
epoch: 0
release: 1.fc7
summary: The KDE Software Development Kit (SDK)
url: http://www.kde.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/Desktops
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: kdesdk-3.5.6-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kdesdk-3.5.6-1.fc7.i386.rpm
checksum_type: sha
description:
  A collection of applications and tools used by KDE developers.
  Among other things, kdesdk provides tools for working on the KDE CVS
  repository.


pkgId: 748070576cb7cb8c0f08ddd63ed4d6c603e753f3
name: gnome-applet-sensors
arch: i386
version: 1.7.8
epoch: 0
release: 3.fc6
summary: Gnome panel applet for hardware sensors
url: http://sensors-applet.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: gnome-applet-sensors-1.7.8-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gnome-applet-sensors-1.7.8-3.fc6.i386.rpm
checksum_type: sha
description:
  GNOME Sensors Applet is an applet for the GNOME Panel to display readings
  from hardware sensors, including CPU and system temperatures, fan speeds
  and voltage readings under Linux.
  Can interface via the Linux kernel i2c modules, or the i8k kernel module (for
  Dell Inspirion 8000 Laptops).
  Includes a simple, yet highly customizable display and intuitive
  user-interface.
  Alarms can be set for each sensor to notify the user once a certain value
  has been reached, and can be configured to execute a given command at given
  repeated intervals.
  GNOME HIG v2.0 compliant.


pkgId: fa2469ba5c7b550edb702a86c2261ac687a2a2db
name: Canna
arch: i386
version: 3.7p3
epoch: 0
release: 18.fc7
summary: A Japanese character set input system.
url: http://www.nec.co.jp/japanese/product/computer/soft/canna/
rpm_license: Distributable
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: Canna-3.7p3-18.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/Canna-3.7p3-18.fc7.i386.rpm
checksum_type: sha
description:
  Canna provides a user interface for inputting Japanese characters.
  Canna supports Nemacs (Mule), kinput2, and canuum. All of these tools
  can then use a single customization file, Romaji-to-Kana conversion
  rules and dictionaries, and input Japanese in the same way. Canna
  automatically supports Kana-to-Kanji conversions; the conversions are
  based on a client-server model.


pkgId: 1fb9d47425bf767a173678a43dedc102fd9a1c8e
name: wifiroamd
arch: noarch
version: 1.11
epoch: 0
release: 1.fc6
summary: Automatic WiFi connection (re)establishment daemon
url: http://www.tummy.com/Community/software/wifiroamd/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: ppc1.fedora.phx.redhat.com
rpm_sourcerpm: wifiroamd-1.11-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/wifiroamd-1.11-1.fc6.noarch.rpm
checksum_type: sha
description:
  WiFiRoamd is a program that monitors your wireless device to keep it
  connected to a good access point.  It will scan looking for a known AP, or
  will try the AP with the strongest un-encrypted signal.  If a script is
  found for the specific AP ESSID or MAC address is found, that script is
  run.  Otherwise, a "default" script is run.

  After that script is run, scripts in the "up.d" directory are run.  These
  implement extra functionality such as DHCP, ESSID "pinning" (where it
  explicitly does "iwconfig $DEVICE essid $ESSID", so that you don't
  accidentally wander to another AP) and other local things such as
  restarting OpenVPN, etc.


pkgId: 16edf1745f1e4db1dd72644a52d2a01c8e707695
name: kannel
arch: i386
version: 1.4.1
epoch: 0
release: 2.fc6
summary: WAP and SMS gateway
url: http://www.kannel.org/
rpm_license: Kannel
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer3.fedora.redhat.com
rpm_sourcerpm: kannel-1.4.1-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kannel-1.4.1-2.fc6.i386.rpm
checksum_type: sha
description:
  The Kannel Open Source WAP and SMS gateway works as both an SMS gateway, for
  implementing keyword based services via GSM text messages, and a WAP gateway,
  via UDP. The SMS part is fairly mature, the WAP part is early in its
  development. In this release, the GET request for WML pages and WMLScript
  files via HTTP works, including compilation for WML and WMLScript to binary
  forms. Only the data call bearer (UDP) is supported, not SMS.


pkgId: 3f656e0ce503411284bdf86dbc63e4a591467efa
name: castor
arch: i386
version: 0.9.5
epoch: 0
release: 1jpp.7
summary: An open source data binding framework for Java
url: http://castor.codehaus.org
rpm_license: Exolab Software License
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries/Java
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: castor-0.9.5-1jpp.7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/castor-0.9.5-1jpp.7.i386.rpm
checksum_type: sha
description:
  Castor is an open source data binding framework for Java. It's basically
  the shortest path between Java objects, XML documents and SQL tables.
  Castor provides Java to XML binding, Java to SQL persistence, and more.


pkgId: 373fbf7137ad32ea3f49ca6ff5d804f81efe7bc3
name: jakarta-commons-cli
arch: i386
version: 1.0
epoch: 0
release: 6jpp_10.fc6
summary: Command Line Interface Library for Java
url: http://jakarta.apache.org/commons/cli/
rpm_license: Apache Software License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.redhat.com
rpm_sourcerpm: jakarta-commons-cli-1.0-6jpp_10.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jakarta-commons-cli-1.0-6jpp_10.fc6.i386.rpm
checksum_type: sha
description:
  The CLI library provides a simple and easy to use API for working with
  the command line arguments and options.


pkgId: bcdd754e92a0170f915386a92cf1f951606f0183
name: xemacs-el
arch: i386
version: 21.5.27
epoch: 0
release: 8.fc7
summary: Emacs lisp source files for XEmacs
url: http://www.xemacs.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xemacs-21.5.27-8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xemacs-el-21.5.27-8.fc7.i386.rpm
checksum_type: sha
description:
  XEmacs is a highly customizable open source text editor and
  application development system.  It is protected under the GNU General
  Public License and related to other versions of Emacs, in particular
  GNU Emacs.  Its emphasis is on modern graphical user interface support
  and an open software development model, similar to Linux.

  This package contains the lisp source files for XEmacs, mainly of
  interest when developing or debugging XEmacs itself.


pkgId: 42bf206cffaa61e2fd37290925da3daf58ed7b5e
name: perl-Mail-Mbox-MessageParser
arch: noarch
version: 1.5000
epoch: 0
release: 2.fc7
summary: A fast and simple mbox folder reader
url: http://sourceforge.net/projects/m-m-msgparser/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Mail-Mbox-MessageParser-1.5000-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Mail-Mbox-MessageParser-1.5000-2.fc7.noarch.rpm
checksum_type: sha
description:
  Mail::Mbox::MessageParser is a feature-poor but very fast mbox parser. It uses
  the best of three strategies for parsing a mailbox: either using cached folder
  information, GNU grep, or highly optimized Perl.


pkgId: ee4fcbdc8884555fc083dcc7c6b80fe4b47c9830
name: emacspeak
arch: noarch
version: 25
epoch: 0
release: 3.fc7
summary: emacspeak -- The Complete Audio Desktop
url: http://emacspeak.sourceforge.net/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Editors
rpm_buildhost: js20-bc2-9.build.redhat.com
rpm_sourcerpm: emacspeak-25-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/emacspeak-25-3.fc7.noarch.rpm
checksum_type: sha
description:
  Emacspeak is a speech interface that allows visually impaired users to
  interact independently and efficiently with the computer. Emacspeak has
  dramatically changed how the author and hundreds of blind and visually
  impaired users around the world interact with the personal computer and
  the Internet. A rich suite of task-oriented speech-enabled tools provides
  efficient speech-enabled access to the evolving semantic WWW.
  When combined with Linux running on low-cost PC hardware,
  Emacspeak/Linux provides a reliable, stable speech-friendly solution that
  opens up the Internet to visually impaired users around the world.


pkgId: daa0de624c156eb2c6fcdf17084999c9712ffb41
name: libnet-devel
arch: i386
version: 1.1.2.1
epoch: 0
release: 10.fc7
summary: Development files for libnet
url: http://www.packetfactory.net/libnet/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libnet-1.1.2.1-10.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libnet-devel-1.1.2.1-10.fc7.i386.rpm
checksum_type: sha
description:
  Libnet is an API to help with the construction and handling of network packets.
  It provides a portable framework for low-level network packet writing and
  handling (use libnet in conjunction with libpcap and you can write some really
  cool stuff).  Libnet includes packet creation at the IP layer and at the link
  layer as well as a host of supplementary and complementary functionality.
  Libnet is very handy with which to write network tools and network test code.
  See the manpage and sample test code for more detailed information.


pkgId: e792425a5991fc6b5591d7ea389cea73d2b152d0
name: thinkfinger-devel
arch: i386
version: 0.2.2
epoch: 0
release: 4.fc7
summary: Development package for thinkfinger
url: http://thinkfinger.sourceforge.net
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: thinkfinger-0.2.2-4.fc7.src.rpm
location_href: Fedora/thinkfinger-devel-0.2.2-4.fc7.i386.rpm
checksum_type: sha
description:
  ThinkFinger is a driver for the UPEK/SGS Thomson Microelectronics fingerprint
  reader (USB ID 0483:2016). The device is being found either as a standalone USB
  device, built into USB keyboards or built into laptops.  The following laptop
  vendors are using the device:

  - Dell
  - IBM/Lenovo
  - Toshiba

  Toshiba is shipping their laptops either with the UPEK/SGS Thomson
  Microelectronics fingerprint reader or with a fingerprint reader built by
  AuthenTec. The AuthenTec fingerprint reader is *not* supported by ThinkFinger.

  SONY laptops with the UPEK/SGS Thomson Microelectronics fingerprint reader are
  not supported. This package contains development files for thinkfinger.


pkgId: e5258ea8dc2263d36321cdbc08d81fec09a87521
name: rrdtool
arch: i386
version: 1.2.23
epoch: 0
release: 3.fc7
summary: Round Robin Database Tool to store and display time-series data
url: http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Databases
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: rrdtool-1.2.23-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/rrdtool-1.2.23-3.fc7.i386.rpm
checksum_type: sha
description:
  RRD is the Acronym for Round Robin Database. RRD is a system to store and
  display time-series data (i.e. network bandwidth, machine-room temperature,
  server load average). It stores the data in a very compact way that will not
  expand over time, and it presents useful graphs by processing the data to
  enforce a certain data density. It can be used either via simple wrapper
  scripts (from shell or Perl) or via frontends that poll network devices and
  put a friendly user interface on it.


pkgId: 537d8a31a1f92b1bd51216f7d5c6366904eedd26
name: python-urljr
arch: noarch
version: 1.0.1
epoch: 0
release: 1.fc7
summary: A common interface to urllib2 and curl for making HTTP requests
url: http://www.openidenabled.com/openid/libraries/python/urljr
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: python-urljr-1.0.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-urljr-1.0.1-1.fc7.noarch.rpm
checksum_type: sha
description:
  URL-related utilities from JanRain, Inc. This package contains the
  "fetchers" module, which provides a common interface to urllib2 and
  curl for making HTTP requests.


pkgId: 620e0faf3d10b5fbecd3f0338091981418261ad0
name: perl-Kwiki-Attachments
arch: noarch
version: 0.18
epoch: 0
release: 3.fc7
summary: Kwiki Page Attachments Plugin
url: http://search.cpan.org/dist/Kwiki-Attachments/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Kwiki-Attachments-0.18-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Kwiki-Attachments-0.18-3.fc7.noarch.rpm
checksum_type: sha
description:
  This module gives a Kwiki wiki the ability to upload, store and manage file
  attachments on any page. Thumbnails will be created for supported file
  types if Imager or Image::Magick is installed. For more information, read
  the module POD.


pkgId: a5738d7cbf046db997d2df44fc407e3542979d70
name: vte-devel
arch: i386
version: 0.16.3
epoch: 0
release: 2.fc7
summary: Files needed for developing applications which use vte
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: vte-0.16.3-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/vte-devel-0.16.3-2.fc7.i386.rpm
checksum_type: sha
description:
  VTE is a terminal emulator widget for use with GTK+ 2.0.  This
  package contains the files needed for building applications using VTE.


pkgId: e9568f270452c0f49f3bd518ca4127200d80c1ae
name: qcad
arch: i386
version: 2.0.5.0
epoch: 0
release: 5.fc6
summary: Simple 2D CAD program
url: http://www.ribbonsoft.com/qcad.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: qcad-2.0.5.0-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qcad-2.0.5.0-5.fc6.i386.rpm
checksum_type: sha
description:
  QCad is an application for computer aided drafting in two
  dimensions. With QCad you can create technical drawings such as plans
  for buildings, interiors or mechanical parts. QCad works under Linux,
  Unix Systems, Mac OS X and Windows. The source code of QCad is
  released under the GPL (Open Source).


pkgId: 6d912855ea322e367ba2e9e3a4d692db068e7777
name: dates-devel
arch: i386
version: 0.3.1
epoch: 0
release: 1.fc7
summary: Development libraries for dates
url: http://projects.o-hand.com/dates
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: dates-0.3.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dates-devel-0.3.1-1.fc7.i386.rpm
checksum_type: sha
description:
  This package provides the necessary development libraries and include
  files to allow you to develop with dates.


pkgId: 831721ab5f62fab4cddc866cb9e6af4e48377117
name: vips-devel
arch: i386
version: 7.10.21
epoch: 0
release: 1.fc6
summary: Development tools for programs for processing large images
url: http://www.vips.ecs.soton.ac.uk/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: vips-7.10.21-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/vips-devel-7.10.21-1.fc6.i386.rpm
checksum_type: sha
description:
  The vips-devel package contains the header files and
  libraries necessary for developing programs using VIPS. It also
  contains a C++ API and development man pages.


pkgId: 1850fe3c1fd3eccb0a5d36e7a507d9992c8a1913
name: vegastrike
arch: i386
version: 0.4.3
epoch: 0
release: 3.fc7
summary: 3D OpenGL spaceflight simulator
url: http://vegastrike.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Amusements/Games
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: vegastrike-0.4.3-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/vegastrike-0.4.3-3.fc7.i386.rpm
checksum_type: sha
description:
  Vega Strike is a GPL 3D OpenGL Action RPG space sim that allows a player to
  trade and bounty hunt. You start in an old beat up Wayfarer cargo ship, with
  endless possibility before you and just enough cash to scrape together a life.
  Yet danger lurks in the space beyond.


pkgId: 2811f42c5b16fcde835d8178efda18cab853f659
name: perl-DateTime
arch: i386
version: 0.37
epoch: 1
release: 3.fc7
summary: Date and time objects
url: http://search.cpan.org/dist/DateTime/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-DateTime-0.37-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-DateTime-0.37-3.fc7.i386.rpm
checksum_type: sha
description:
  DateTime is a class for the representation of date/time combinations, and
  is part of the Perl DateTime project. For details on this project please
  see http://datetime.perl.org/. The DateTime site has a FAQ which may help
  answer many "how do I do X?" questions. The FAQ is at
  http://datetime.perl.org/faq.html.


pkgId: dfeed7ddabebfe2d85d6035451881a5a3d04a1a3
name: isic
arch: i386
version: 0.07
epoch: 0
release: 1.fc7
summary: IP Stack Integrity Checker
url: http://isic.sourceforge.net
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: isic-0.07-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/isic-0.07-1.fc7.i386.rpm
checksum_type: sha
description:
  ISIC is a suite of utilities to exercise the stability of
  an IP Stack and its component stacks (TCP, UDP, ICMP et.
  al.) It generates piles of pseudo random packets of the
  target protocol. The packets be given tendancies to conform
  to. Ie 50% of the packets generated can have IP Options.
  25% of the packets can be IP fragments... But the
  percentages are arbitrary and most of the packet fields
  have a configurable tendancy.

  The packets are then sent against the target machine to
  either penetrate its firewall rules or find bugs in the
  IP stack.

  ISIC also contains a utility generate raw ether frames to
  examine hardware implementations.


pkgId: 3b4f1ae71da54044080f9b7d4288c6a630c78a59
name: Democracy
arch: i386
version: 0.9.5.1
epoch: 0
release: 8.fc7
summary: Democracy Player
url: http://www.getdemocracy.com/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: Democracy-0.9.5.1-8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/Democracy-0.9.5.1-8.fc7.i386.rpm
checksum_type: sha
description:
  Democracy player is a free application that turns your computer into an
  internet TV video player. This release is still a beta version, which means
  that there are some bugs, but we're moving quickly to fix them and will be
  releasing bug fixes on a regular basis.


pkgId: 609883bbcb75621abe6df1ea5484ac763b794f05
name: festvox-ked-diphone
arch: i386
version: 0.19990610
epoch: 0
release: 1.fc7
summary: American English male speaker "Kurt" for Festival
url: http://www.cstr.ed.ac.uk/projects/festival/
rpm_license: MIT-style
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: festival-1.96-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/festvox-ked-diphone-0.19990610-1.fc7.i386.rpm
checksum_type: sha
description:
  American English male speaker ("Kurt") for Festival.

  This voice provides an American English male voice using a residual excited
  LPC diphone synthesis method. It uses the CMU Lexicon for pronunciations.
  Prosodic phrasing is provided by a statistically trained model using part of
  speech and local distribution of breaks. Intonation is provided by a CART
  tree predicting ToBI accents and an F0 contour generated from a model
  trained from natural speech. The duration model is also trained from data
  using a CART tree.


pkgId: 439d73a7b8a71f6f7d7c75adf70f98e38df1912e
name: libsndfile-devel
arch: i386
version: 1.0.17
epoch: 0
release: 1.fc6
summary: Development files for libsndfile
url: http://www.mega-nerd.com/libsndfile/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: libsndfile-1.0.17-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libsndfile-devel-1.0.17-1.fc6.i386.rpm
checksum_type: sha
description:
  libsndfile is a C library for reading and writing sound files such as
  AIFF, AU, WAV, and others through one standard interface.
  This package contains files needed to develop with libsndfile.


pkgId: d63a61c06eba8e9deed10e700d871545a5c974bd
name: libedit-devel
arch: i386
version: 2.10
epoch: 0
release: 1.20070302cvs.fc7
summary: Development files for libedit
url: http://www.thrysoee.dk/editline/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libedit-2.10-1.20070302cvs.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libedit-devel-2.10-1.20070302cvs.fc7.i386.rpm
checksum_type: sha
description:
  This is an autotool- and libtoolized port of the NetBSD Editline
  library (libedit). This Berkeley-style licensed command line
  editor library provides generic line editing, history, and
  tokenization functions, similar to those found in GNU Readline.

  This package contains development files for libedit.


pkgId: d34a41dfd9bebf9cc64d47337b84eecb19bb701c
name: clamav-data
arch: i386
version: 0.90.2
epoch: 0
release: 1.fc7
summary: Virus signature data for the Clam Antivirus scanner
url: http://www.clamav.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/File
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: clamav-0.90.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/clamav-data-0.90.2-1.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the virus-database needed by clamav. This
  database should be updated regularly; the 'clamav-update' package
  ships a corresponding cron-job. This package and the
  'clamav-data-empty' package are mutually exclusive.

  Use -data when you want a working (but perhaps outdated) virus scanner
  immediately after package installation.

  Use -data-empty when you are updating the virus database regulary and
  do not want to download a >5MB sized rpm-package with outdated virus
  definitions.


pkgId: b8713ac42699566faf60d1bd05c1ba852c3b5a89
name: qca-tls
arch: i386
version: 1.0
epoch: 0
release: 10.fc6
summary: TLS plugin for the Qt Cryptographic Architecture
url: http://delta.affinix.com/qca/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: qca-tls-1.0-10.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qca-tls-1.0-10.fc6.i386.rpm
checksum_type: sha
description:
  This is a plugin to provide SSL/TLS capability to programs that use the Qt
  Cryptographic Architecture (QCA).  QCA is a library providing an easy API
  for several cryptographic algorithms to Qt programs.  This package only
  contains the TLS plugin.


pkgId: ce2a93abe631d06eaa11dea788a44b60aae9103e
name: taxipilot
arch: i386
version: 0.9.1
epoch: 0
release: 2.fc7
summary: Game where you pilot a taxi in space
url: http://taxipilot.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Amusements/Games
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: taxipilot-0.9.1-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/taxipilot-0.9.1-2.fc7.i386.rpm
checksum_type: sha
description:
  Game where you pilot a taxi in space, the objective is to pick up passengers
  waiting on a number of platforms and to drop them where they want to go.
  That's basically it.


pkgId: 6b3bced8b2caf05b144b8f1ca12c124a5b5f35f3
name: rhino
arch: noarch
version: 1.6
epoch: 0
release: 0.1.r5.1jpp.2.fc7
summary: JavaScript for Java
url: http://www.mozilla.org/rhino/
rpm_license: MPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries/Java
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: rhino-1.6-0.1.r5.1jpp.2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rhino-1.6-0.1.r5.1jpp.2.fc7.noarch.rpm
checksum_type: sha
description:
  Rhino is an open-source implementation of JavaScript written entirely
  in Java. It is typically embedded into Java applications to provide
  scripting to end users.


pkgId: df768c48a24a18d822cd92a06b173db2f0e41a8e
name: perl-Hash-Case
arch: noarch
version: 1.003
epoch: 0
release: 2.fc7
summary: Base class for hashes with key-casing requirements
url: http://search.cpan.org/dist/Hash-Case/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Hash-Case-1.003-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Hash-Case-1.003-2.fc7.noarch.rpm
checksum_type: sha
description:
  Hash::Case is the base class for various classes which tie special
  treatment for the casing of keys. Be aware of the differences in
  implementation: Lower and Upper are tied native hashes: these hashes have
  no need for hidden fields or other assisting data structured. A case
  Preserve hash will actually create three hashes.


pkgId: 08ca51384f93ccd3f323474c3cdb36e393c6e322
name: gamin-python
arch: i386
version: 0.1.8
epoch: 0
release: 5.fc7
summary: Python bindings for the gamin library
url: http://www.gnome.org/~veillard/gamin/
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: gamin-0.1.8-5.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gamin-python-0.1.8-5.fc7.i386.rpm
checksum_type: sha
description:
  The gamin-python package contains a module that allow monitoring of
  files and directories from the Python language based on the support
  of the gamin package.


pkgId: 2344ef03e750e247ddedde8445909b9c83509ce1
name: perl-Crypt-SSLeay
arch: i386
version: 0.53
epoch: 0
release: 1.fc7
summary: Crypt::SSLeay - OpenSSL glue that provides LWP https support
url: http://search.cpan.org/dist/Crypt-SSLeay/
rpm_license: GPL or Artistic
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: perl-Crypt-SSLeay-0.53-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Crypt-SSLeay-0.53-1.fc7.i386.rpm
checksum_type: sha
description:
  This perl module provides support for the https protocol under LWP, so
  that a LWP::UserAgent can make https GET & HEAD & POST
  requests. Please see perldoc LWP for more information on POST
  requests.

  The Crypt::SSLeay package contains Net::SSL, which is automatically
  loaded by LWP::Protocol::https on https requests, and provides the
  necessary SSL glue for that module to work.


pkgId: 39aa1497120be94268b116b0e193ef1507ce7da3
name: goocanvas-devel
arch: i386
version: 0.6
epoch: 0
release: 2.fc7
summary: A new canvas widget for GTK+ that uses cairo for drawing
url: http://sourceforge.net/projects/goocanvas
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: goocanvas-0.6-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/goocanvas-devel-0.6-2.fc7.i386.rpm
checksum_type: sha
description:
  GooCanvas is a new canvas widget for GTK+ that uses the cairo 2D library for
  drawing. It has a model/view split, and uses interfaces for canvas items and
  views, so you can easily turn any application object into canvas items.

  These are the files used for development.


pkgId: 77f91daab6fc2e26de990faae936dc83b6726e94
name: perl-Test-Taint
arch: i386
version: 1.04
epoch: 0
release: 3.fc6
summary: Tools to test taintedness
url: http://search.cpan.org/dist/Test-Taint/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: perl-Test-Taint-1.04-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Test-Taint-1.04-3.fc6.i386.rpm
checksum_type: sha
description:
  Tainted data is data that comes from an unsafe source, such as the command
  line, or, in the case of web apps, any GET or POST transactions. Read the
  perlsec man page for details on why tainted data is bad, and how to untaint
  the data.

  When you're writing unit tests for code that deals with tainted data, you'll
  want to have a way to provide tainted data for your routines to handle, and
  easy ways to check and report on the taintedness of your data, in standard
  Test::More style.


pkgId: 58de54bb6f3e356626e14f56a498a58e4ebedbc3
name: fribidi
arch: i386
version: 0.10.7
epoch: 0
release: 6.fc7
summary: Library implementing the Unicode Bidirectional Algorithm
url: http://fribidi.org
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: fribidi-0.10.7-6.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fribidi-0.10.7-6.fc7.i386.rpm
checksum_type: sha
description:
  A library to handle bidirectional scripts (for example Hebrew, Arabic),
  so that the display is done in the proper way; while the text data itself
  is always written in logical order.


pkgId: 5ce135762457779370761316739d50051f3fb954
name: libtranslate
arch: i386
version: 0.99
epoch: 0
release: 9.fc6
summary: Natural language translation library
url: http://www.nongnu.org/libtranslate
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: libtranslate-0.99-9.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libtranslate-0.99-9.fc6.i386.rpm
checksum_type: sha
description:
  Libtranslate is a library for translating text and web pages
  between natural languages. Its modular infrastructure allows
  to implement new translation services separately from the core library.

  Libtranslate is shipped with a generic module supporting
  web-based translation services such as Babel Fish, Google Language Tools
  and SYSTRAN. Moreover, the generic module allows to add new services
  simply by adding a few lines to a XML file (see libtranslate(5)).

  The libtranslate distribution includes a powerful command line interface
  (see translate(1)). GNOME GUI can be found as separate "gnome-translate"
  package at the same web source.


pkgId: 662d220a5423c8524fe6b0b95dafee8ec56f1c6b
name: qt4
arch: i386
version: 4.2.3
epoch: 0
release: 8.fc7
summary: Qt toolkit
url: http://www.trolltech.com/products/qt/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: qt4-4.2.3-8.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/qt4-4.2.3-8.fc7.i386.rpm
checksum_type: sha
description:
  Qt is a software toolkit for developing applications.

  This package contains base tools, like string, xml, and network
  handling.


pkgId: 8d27da6f6eb3178d879769431cb884830ec72373
name: perl-Crypt-RSA
arch: noarch
version: 1.58
epoch: 0
release: 2.fc7
summary: RSA public-key cryptosystem
url: http://search.cpan.org/dist/Crypt-RSA/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Crypt-RSA-1.58-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Crypt-RSA-1.58-2.fc7.noarch.rpm
checksum_type: sha
description:
  Crypt::RSA is a pure-perl, cleanroom implementation of the RSA public-key
  cryptosystem. It uses Math::Pari(3), a perl interface to the blazingly fast
  PARI library, for big integer arithmetic and number theoretic computations.

  Crypt::RSA provides arbitrary size key-pair generation, plaintext-aware
  encryption (OAEP) and digital signatures with appendix (PSS). For compatibility
  with SSLv3, RSAREF2, PGP and other applications that follow the PKCS #1 v1.5
  standard, it also provides PKCS #1 v1.5 encryption and signatures.


pkgId: fc5dd2358d080bedcf0c432130dfe760f4fbc85f
name: libgadu-devel
arch: i386
version: 1.7.1
epoch: 0
release: 1.fc7
summary: Libgadu development library
url: http://toxygen.net/libgadu/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: libgadu-1.7.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgadu-devel-1.7.1-1.fc7.i386.rpm
checksum_type: sha
description:
  The libgadu-devel package contains the header files and some
  documentation needed to develop application with libgadu.


pkgId: c458c9f11769178ef16d62f77f77e92b742c07c1
name: R-mAr
arch: i386
version: 1.1
epoch: 0
release: 10.fc7
summary: R module to evaluate functions for multivariate AutoRegressive analysis
url: http://cran.r-project.org/contrib
rpm_license: GPL version 2 or newer
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: R-mAr-1.1-10.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/R-mAr-1.1-10.fc7.i386.rpm
checksum_type: sha
description:
  R package:
  An R add-on package for estimation of multivariate AR models through a
  computationally-efficient stepwise least-squares algorithm (Neumaier
  and Schneider, 2001); the procedure is of particular interest for
  high-dimensional data without missing values such as geophysical
  fields.


pkgId: 4ca8d272f7c70033c8d4212a865fe5aa6ae5f654
name: wmix
arch: i386
version: 3.1
epoch: 0
release: 1.fc6
summary: Dockapp mixer
url: http://www.ne.jp/asahi/linux/timecop/#wmix
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/X
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: wmix-3.1-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/wmix-3.1-1.fc6.i386.rpm
checksum_type: sha
description:
  Dockapp mixer for OSS or ALSA. Allows toggling record source, muting
  individual channels, adjusting volume and balance, all in a compact
  dockapp size, with TV-like on-screen-display for volume levels. Supports
  mousewheel to adjust current channel volume, and can be controlled
  remotely with SIGUSR1 / SIGUSR2 to adjust the volume, too. Can use a
  configuration file to control some of the features.


pkgId: 83f13984cf485962b1ab3784b3a0b30509507137
name: fcron
arch: i386
version: 3.0.2
epoch: 0
release: 2.fc7
summary: A task scheduler
url: http://fcron.free.fr/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: fcron-3.0.2-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fcron-3.0.2-2.fc7.i386.rpm
checksum_type: sha
description:
  Fcron is a scheduler. It aims at replacing Vixie Cron, so it implements most
  of its functionalities.
  But contrary to Vixie Cron, fcron does not need your system to be up 7 days
  a week, 24 hours a day: it also works well with systems which are
  not running neither all the time nor regularly (contrary to anacrontab).
  In other words, fcron does both the job of Vixie Cron and anacron, but does
  even more and better :)) ...

  WARNING: fcron isn't started automatically on boot after installation.
  You can use system-config-services to enable automatic fcron startup
  on boot, or use chkconfig as explained in the
  /usr/share/doc/fcron-3.0.2/README.Fedora file.


pkgId: f49bae368e80c16304ba0fd9fbf1e9095bffe3d6
name: perl-Module-Loaded
arch: noarch
version: 0.01
epoch: 0
release: 3.fc7
summary: Mark modules as loaded or unloaded
url: http://search.cpan.org/dist/Module-Loaded/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Module-Loaded-0.01-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Module-Loaded-0.01-3.fc7.noarch.rpm
checksum_type: sha
description:
  When testing applications, often you find yourself needing to provide
  functionality in your test environment that would usually be provided by
  external modules. Rather than munging the %INC by hand to mark these
  external modules as loaded, so they are not attempted to be loaded by
  perl, this module offers you a very simple way to mark modules as loaded
  and/or unloaded.


pkgId: ffe247de05030546699afc71e191e7cce752bceb
name: rgmanager
arch: i386
version: 2.0.23
epoch: 0
release: 2.fc7
summary: Open Source HA Resource Group Failover for Red Hat Enterprise Linux
rpm_license: GPL,LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: rgmanager-2.0.23-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rgmanager-2.0.23-2.fc7.i386.rpm
checksum_type: sha
description:
  Red Hat Resource Group Manager provides high availability of critical server
  applications in the event of planned or unplanned system downtime.


pkgId: d0062007f21e8747aafcd8084fbc6f5cf87d4652
name: libgda-devel
arch: i386
version: 1.9.100
epoch: 1
release: 12.fc7
summary: Development libraries and header files for libgda
url: http://www.gnome-db.org/
rpm_license: LGPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: libgda-1.9.100-12.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/libgda-devel-1.9.100-12.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the header files and libraries needed to write
  or compile programs that use libgda.


pkgId: 5b4f35c24f7130369c61231e69870abce3df68e7
name: amsn
arch: i386
version: 0.96
epoch: 0
release: 7.fc7
summary: MSN Messenger clone for Linux, Mac and Windows
url: http://www.amsn-project.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: amsn-0.96-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/amsn-0.96-7.fc7.i386.rpm
checksum_type: sha
description:
  This is an MSN Messenger clone for Unix, Windows, and Macintosh.
  It is written in tcl/tk and supports filetransfers, webcam, etc.


pkgId: be7f19ea3d3bb1b4f4c383dcfae33540182868dd
name: contacts
arch: i386
version: 0.2
epoch: 0
release: 1.fc7
summary: Contacts addressbook
url: http://projects.o-hand.com/contacts
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: contacts-0.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/contacts-0.2-1.fc7.i386.rpm
checksum_type: sha
description:
  Contacts is a small, lightweight addressbook that uses libebook.
  This is the same library that GNOME Evolution uses, so all contact data that
  exists in your Evolution database is accessible via Contacts. Contacts features
  advanced vCard field type handling and is designed for use on hand-held
  devices, such as the Nokia 770 or the Sharp Zaurus series of PDAs.


pkgId: 4925c9301f2f16d0d6a66487985ebe3c244f14af
name: glyph-keeper-devel
arch: i386
version: 0.32
epoch: 0
release: 1.fc7
summary: Development files for glyph-keeper
url: http://kd.lab.nig.ac.jp/glyph-keeper/
rpm_license: zlib/libpng License
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: glyph-keeper-0.32-1.fc7.src.rpm
location_href: Fedora/glyph-keeper-devel-0.32-1.fc7.i386.rpm
checksum_type: sha
description:
  The glyph-keeper-devel package contains libraries and header files for
  developing applications that use glyph-keeper.


pkgId: ed1d4fd9c13e2e268604af9ee6d69580c39ae4a4
name: revelation
arch: i386
version: 0.4.11
epoch: 0
release: 2.fc7
summary: Password manager for GNOME 2
url: http://oss.codepoet.no/revelation/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: revelation-0.4.11-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/revelation-0.4.11-2.fc7.i386.rpm
checksum_type: sha
description:
  Revelation is a password manager. It organizes accounts in
  a tree structure, and stores them as AES-encrypted XML files.


pkgId: 5f7ff47a54c296bd7197ccc3da39edfa99d26526
name: ppp
arch: i386
version: 2.4.4
epoch: 0
release: 2
summary: The PPP (Point-to-Point Protocol) daemon.
rpm_license: distributable
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: ppp-2.4.4-2.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ppp-2.4.4-2.i386.rpm
checksum_type: sha
description:
  The ppp package contains the PPP (Point-to-Point Protocol) daemon and
  documentation for PPP support. The PPP protocol provides a method for
  transmitting datagrams over serial point-to-point links. PPP is
  usually used to dial in to an ISP (Internet Service Provider) or other
  organization over a modem and phone line.


pkgId: a7ebb712e265d09cdf0c37ff7cea111c00caae8a
name: syslinux
arch: i386
version: 3.36
epoch: 0
release: 4.fc7
summary: Simple kernel loader which boots from a FAT filesystem
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/System
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: syslinux-3.36-4.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/syslinux-3.36-4.fc7.i386.rpm
checksum_type: sha
description:
  SYSLINUX is a suite of bootloaders, currently supporting DOS FAT
  filesystems, Linux ext2/ext3 filesystems (EXTLINUX), PXE network boots
  (PXELINUX), or ISO 9660 CD-ROMs (ISOLINUX).  It also includes a tool,
  MEMDISK, which loads legacy operating systems from these media.


pkgId: 0fe4a638f93ee0278c2e5176411533967c13d859
name: xorg-x11-server-Xephyr
arch: i386
version: 1.3.0.0
epoch: 0
release: 5.fc7
summary: A nested server.
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Koji
rpm_group: User Interface/X
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: xorg-x11-server-1.3.0.0-5.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/xorg-x11-server-Xephyr-1.3.0.0-5.fc7.i386.rpm
checksum_type: sha
description:
  Xephyr is an X server, which has been implemented as an ordinary
  X application.  It runs in a window just like other X applications,
  but it is an X server itself in which you can run other software.  It
  is a very useful tool for developers who wish to test their
  applications without running them on their real X server.  Unlike
  Xnest, Xephyr renders to an X image rather than relaying the
  X protocol, and therefore supports the newer X extensions like
  Render and Composite.


pkgId: a36b199dcd662c4c0a4a8585faa6b39e9652da09
name: ballz
arch: i386
version: 1.0
epoch: 0
release: 1.fc7
summary: Platform game with some puzzle elements
url: http://darkbits.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ballz-1.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ballz-1.0-1.fc7.i386.rpm
checksum_type: sha
description:
  Ballz is a platformer with some puzzle elements. You take control of a ball
  which is genetically modified by the British secret service. Your mission is
  to rescue captured British soldiers from a prison in Iran.

  The game was written in 72 hours for the TINS competition, a competition
  similar to Speedhack. The name TINS is an recursive acronym for ‘TINS is
  not Speedhack’.


pkgId: 1823787ee9ae3cb88f2a6481f512ae56cbd1d921
name: perl-Test-Perl-Critic
arch: noarch
version: 1.01
epoch: 0
release: 1.fc7
summary: Use Perl::Critic in test programs
url: http://search.cpan.org/dist/Test-Perl-Critic/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Test-Perl-Critic-1.01-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Test-Perl-Critic-1.01-1.fc7.noarch.rpm
checksum_type: sha
description:
  Test::Perl::Critic wraps the Perl::Critic engine in a convenient
  subroutine suitable for test programs written using the Test::More
  framework. This makes it easy to integrate coding-standards enforcement
  into the build process. For ultimate convenience (at the expense of some
  flexibility), see the criticism pragma.


pkgId: f9cb477cae3ea9697d71b04efbd43ae6752de560
name: rhdb-utils
arch: i386
version: 8.2.0
epoch: 0
release: 1.fc7
summary: Miscellaneous utilities for PostgreSQL - Red Hat Edition
url: http://sources.redhat.com/rhdb/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Databases
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: rhdb-utils-8.2.0-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rhdb-utils-8.2.0-1.fc7.i386.rpm
checksum_type: sha
description:
  This package contains miscellaneous, non-graphical tools developed for
  PostgreSQL - Red Hat Edition.


pkgId: 5390e22c6fb50266043e0a769713598f869f26a9
name: perl-Convert-Binary-C
arch: i386
version: 0.67
epoch: 0
release: 4.fc7
summary: Binary data conversion using C types
url: http://search.cpan.org/dist/Convert-Binary-C/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-Convert-Binary-C-0.67-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Convert-Binary-C-0.67-4.fc7.i386.rpm
checksum_type: sha
description:
  Convert::Binary::C is a preprocessor and parser for C type definitions. It
  is highly configurable and supports arbitrarily complex data structures.
  Its object-oriented interface has pack and unpack methods that act as
  replacements for Perl's pack and unpack and allow to use C types instead of
  a string representation of the data structure for conversion of binary data
  from and to Perl's complex data structures.


pkgId: 3282c52bb1875fe3996037ff2d8376151aa25ecf
name: htmlview
arch: noarch
version: 4.0.0
epoch: 0
release: 3.fc7
summary: Tools for launching Preferred Applications
rpm_license: Public Domain
rpm_vendor: Koji
rpm_group: Applications/Internet
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: htmlview-4.0.0-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/htmlview-4.0.0-3.fc7.noarch.rpm
checksum_type: sha
description:
  htmlview and launchmail are tools for launching Preferred Applications.
  This package exists for compatibility reasons and is likely to be removed
  later when equivalent functionality is implemented elsewhere.


pkgId: c2a623c4edf2a88f62b063877157839ef7e16a26
name: perl-Object-Realize-Later
arch: noarch
version: 0.16
epoch: 0
release: 1.fc7
summary: Delayed creation of objects
url: http://search.cpan.org/dist/Object-Realize-Later/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Object-Realize-Later-0.16-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Object-Realize-Later-0.16-1.fc7.noarch.rpm
checksum_type: sha
description:
  This module helps you implementing delay loading of object-data.  While
  creating a stub-object, Object::Realize::Later simulates you got the
  real data.


pkgId: 044d64e6593e2b06f8b0e614ad60980887f8f636
name: yp-tools
arch: i386
version: 2.9
epoch: 0
release: 0.1
summary: NIS (or YP) client programs.
url: http://www.linux-nis.org/nis/yp-tools/index.html
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: yp-tools-2.9-0.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/yp-tools-2.9-0.1.i386.rpm
checksum_type: sha
description:
  The Network Information Service (NIS) is a system which provides
  network information (login names, passwords, home directories, group
  information) to all of the machines on a network.  NIS can enable
  users to login on any machine on the network, as long as the machine
  has the NIS client programs running and the user's password is
  recorded in the NIS passwd database.  NIS was formerly known as Sun
  Yellow Pages (YP).

  This package's NIS implementation is based on FreeBSD's YP and is a
  special port for glibc 2.x and libc versions 5.4.21 and later.  This
  package only provides the NIS client programs.  In order to use the
  clients, you'll need to already have an NIS server running on your
  network. An NIS server is provided in the ypserv package.

  Install the yp-tools package if you need NIS client programs for machines
  on your network.  You will also need to install the ypbind package on
  every machine running NIS client programs.  If you need an NIS server,
  you'll need to install the ypserv package on one machine on the network.


pkgId: 3450cd247bde36068811e89a328a970f2c10debe
name: tkcon
arch: noarch
version: 2.4
epoch: 0
release: 4.fc6
summary: Tcl GUI console
url: http://tkcon.sourceforge.net/
rpm_license: BSD-like
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc2.fedora.phx.redhat.com
rpm_sourcerpm: tkcon-2.4-4.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tkcon-2.4-4.fc6.noarch.rpm
checksum_type: sha
description:
  tkcon is a replacement for the standard Tk console with many more features.
  It works on all platforms where Tcl/Tk is available.
  It is meant primarily to aid one when working with the little details
  inside tcl and tk, giving Unix users the GUI console provided by default
  in the Mac and Windows Tk.


pkgId: 59869c57a839d14f298fbccbace999344ff6df5d
name: libbonoboui-devel
arch: i386
version: 2.18.0
epoch: 0
release: 1.fc7
summary: Libraries and headers for libbonoboui
url: http://ftp.gnome.org
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: libbonoboui-2.18.0-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libbonoboui-devel-2.18.0-1.fc7.i386.rpm
checksum_type: sha
description:
  Bonobo is a component system based on CORBA, used by the GNOME desktop.
  libbonoboui contains GUI components that come with Bonobo.

  This package contains header files used to compile programs that
  use libbonoboui.


pkgId: 17e47d71b85397b238e09962b8bae1cf05073c72
name: xfce4-dev-tools
arch: noarch
version: 4.4.0
epoch: 0
release: 1.fc7
summary: Xfce developer tools
url: http://xfce.org/~benny/projects/xfce4-dev-tools/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: xfce4-dev-tools-4.4.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xfce4-dev-tools-4.4.0-1.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains common tools required by Xfce developers and people
  that want to build Xfce from SVN.


pkgId: 3e813f4db30f2af7339541f79c3727e9d0648d76
name: tvtime
arch: i386
version: 1.0.1
epoch: 0
release: 6
summary: A high quality TV viewer.
url: http://tvtime.sourceforge.net
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: tvtime-1.0.1-6.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tvtime-1.0.1-6.i386.rpm
checksum_type: sha
description:
  tvtime is a high quality television application for use with video
  capture cards.  tvtime processes the input from a capture card and
  displays it on a computer monitor or projector.  Unlike other television
  applications, tvtime focuses on high visual quality making it ideal for
  videophiles.


pkgId: 0bd5a2362f2361160b857b0b1fcfea3597dd868a
name: gedit-devel
arch: i386
version: 2.18.0
epoch: 1
release: 3.fc7
summary: The files needed for developing plug-ins for the gEdit editor
url: http://gedit.sourceforge.net/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: gedit-2.18.0-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/gedit-devel-2.18.0-3.fc7.i386.rpm
checksum_type: sha
description:
  gEdit is a small but powerful text editor for the GNOME GUI desktop.
  This package allows you to develop plug-ins that work within gEdit.

  Install gedit-devel if you want to write plug-ins for gEdit.


pkgId: d0a2870353d90bdd2fa775d288adf7b173570b4e
name: perl-POE-API-Peek
arch: noarch
version: 1.0802
epoch: 0
release: 1.fc7
summary: Peek into the internals of a running POE environment
url: http://search.cpan.org/dist/POE-API-Peek/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-POE-API-Peek-1.0802-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-POE-API-Peek-1.0802-1.fc7.noarch.rpm
checksum_type: sha
description:
  POE::API::Peek extends the POE::Kernel interface to provide clean access to
  Kernel internals in a cross-version compatible manner. Other calculated
  data is also available.


pkgId: ba345e0bcc3f3b0f7c77ca44b77c7f18ed42798f
name: eiciel
arch: i386
version: 0.9.4
epoch: 0
release: 1.fc7
summary: Graphical access control list (ACL) editor
url: http://rofi.pinchito.com/eiciel
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: eiciel-0.9.4-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eiciel-0.9.4-1.fc7.i386.rpm
checksum_type: sha
description:
  Graphical editor for access control lists (ACL)
  and extended attributes (XATTR), either as an
  extension within Nautilus, or as a standalone utility.


pkgId: b5ba616298cc39ab6889f6a675c0914c646093df
name: synce-serial
arch: i386
version: 0.9.1
epoch: 0
release: 2.fc7
summary: Serial connection support for Pocket PC devices
url: http://www.synce.org
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Applications/Communications
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: synce-serial-0.9.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/synce-serial-0.9.1-2.fc7.i386.rpm
checksum_type: sha
description:
  Synce-serial is part of the SynCE project: http://www.synce.org

  This module contains helper scripts for setting up a serial connection for use
  with SynCE. They are basically wrappers around pppd:
    synce-serial-config  - Use this to select serial port and IP addresses
    synce-serial-start   - Use this to start connection
    synce-serial-abort   - Use this to abort a connection

  Please read the included README.Fedora for details


pkgId: 1d40a9ea0654c6ea3958464c4fa65277b2df4c8b
name: pam_ccreds
arch: i386
version: 4
epoch: 0
release: 2.fc7
summary: Pam module to cache login credentials
url: http://www.padl.com/OSS/pam_ccreds.html
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Base
rpm_buildhost: hs20-bc1-5.build.redhat.com
rpm_sourcerpm: pam_ccreds-4-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pam_ccreds-4-2.fc7.i386.rpm
checksum_type: sha
description:
  The pam_ccreds module provides a mechanism for caching
  credentials when authenticating against a network
  authentication service, so that authentication can still
  proceed when the service is down. Note at present no
  mechanism is provided for caching _authorization_
  information, i.e. whether you are allowed to login once
  authenticated.


pkgId: 89d5964b070f953dae9423452ae090dea8d31006
name: subversion-api-docs
arch: noarch
version: 1.4.3
epoch: 0
release: 1.fc7
summary: Subversion API documentation
url: http://subversion.tigris.org/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: subversion-api-docs-1.4.3-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/subversion-api-docs-1.4.3-1.fc7.noarch.rpm
checksum_type: sha
description:
  Subversion is a concurrent version control system which enables one or more
  users to collaborate in developing and maintaining a hierarchy of files and
  directories while keeping a history of all changes. This package provides
  Subversion API documentation for developers.


pkgId: deba492048a1885c2d0ee23ea377a28213fd4913
name: libogg
arch: i386
version: 1.1.3
epoch: 2
release: 3.fc7
summary: The Ogg bitstream file format library
url: http://www.xiph.org/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: libogg-1.1.3-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libogg-1.1.3-3.fc7.i386.rpm
checksum_type: sha
description:
  Libogg is a library for manipulating Ogg bitstream file formats.
  Libogg supports both making Ogg bitstreams and getting packets from
  Ogg bitstreams.


pkgId: c8779a15fc178b91a341aa3effd12770b39c98f9
name: gnumeric-devel
arch: i386
version: 1.6.3
epoch: 1
release: 6.fc7
summary: Files necessary to develop gnumeric-based applications.
url: http://www.gnome.org/gnumeric/
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: gnumeric-1.6.3-6.fc7.src.rpm
location_href: Fedora/gnumeric-devel-1.6.3-6.fc7.i386.rpm
checksum_type: sha
description:
  Gnumeric is a spreadsheet program for the GNOME GUI desktop
  environment. The gnumeric-devel package includes files necessary to
  develop gnumeric-based applications.


pkgId: 15e8170f3e4a2ca9da75eb7b4fd280a4c1ecf549
name: Inventor-examples
arch: i386
version: 2.1.5
epoch: 0
release: 26.fc7
summary: SGI Open Inventor (TM) source code examples
url: http://oss.sgi.com/projects/inventor/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: Inventor-2.1.5-26.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/Inventor-examples-2.1.5-26.fc7.i386.rpm
checksum_type: sha
description:
  SGI Open Inventor (TM) Source Examples from the Inventor books
  "The Inventor Mentor" and "The Inventor Toolmaker".


pkgId: c1f78ecfbdb617af32833e809081b53e31d30cc4
name: kdebase
arch: i386
version: 3.5.6
epoch: 6
release: 12.fc7
summary: K Desktop Environment - core files
url: http://www.kde.org
rpm_license: GPL
rpm_vendor: Koji
rpm_group: User Interface/Desktops
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: kdebase-3.5.6-12.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/kdebase-3.5.6-12.fc7.i386.rpm
checksum_type: sha
description:
  Core applications for the K Desktop Environment.  Included are: kdm
  (replacement for xdm), kwin (window manager), konqueror (filemanager,
  web browser, ftp client, ...), konsole (xterm replacement), kpanel
  (application starter and desktop pager), kaudio (audio server),
  kdehelp (viewer for kde help files, info and man pages), kthememgr
  (system for managing alternate theme packages) plus other KDE
  components (kcheckpass, kikbd, kscreensaver, kcontrol, kfind,
  kfontmanager, kmenuedit).


pkgId: 0dcedf1c08fa4af267f29535a9accfb4c3935f2c
name: tcldom
arch: i386
version: 3.1
epoch: 0
release: 10.fc7
summary: TclDOM is a package that provides a DOM binding for the Tcl scripting language
url: http://tclxml.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tcldom-3.1-10.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tcldom-3.1-10.fc7.i386.rpm
checksum_type: sha
description:
  This package provides a DOM binding for Tcl.  It provides one of the following
  implementations:
      *     A Tcl-only implementation (slow, but no compilation required),
      *     A wrapper for the Gnome libxml2 library [http://xmlsoft.org/]
            (also fast and compatiable with TclXSLT/libxslt
            [http://tclxml.sourceforge.net/tclxslt.html]).


pkgId: 716ce14a9c0bb9ab9833d6c5e7cf3156b25e5ff7
name: bitgtkmm
arch: i386
version: 0.4.0
epoch: 0
release: 2.fc7
summary: The bitgtkmm library provides gtkmm widgets for the bit library
url: http://libbit.sourceforge.net/gtkmm
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: bitgtkmm-0.4.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/bitgtkmm-0.4.0-2.fc7.i386.rpm
checksum_type: sha
description:
  The bitgtkmm library provides gtkmm widgets to display the buffers, records,
  fields and elements of the bit library.


pkgId: 1696c5b7b1a218893e2ee52faafb501a5227588f
name: perl-MooseX-Object-Pluggable
arch: noarch
version: 0.0005
epoch: 0
release: 1.fc7
summary: Make your Moose classes pluggable
url: http://search.cpan.org/dist/MooseX-Object-Pluggable/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-MooseX-Object-Pluggable-0.0005-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-MooseX-Object-Pluggable-0.0005-1.fc7.noarch.rpm
checksum_type: sha
description:
  This module aids in the development and deploment of plugin-enabled
  Moose-based classes.  It extends the Moose framework via roles to enable
  this behavior.


pkgId: 621bea6ea6ebbe93df3207084c3479185c6ff9d2
name: gcc-c++
arch: i386
version: 4.1.2
epoch: 0
release: 12
summary: C++ support for GCC
url: http://gcc.gnu.org
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: gcc-4.1.2-12.src.rpm
rpm_packager: Koji
location_href: Fedora/gcc-c++-4.1.2-12.i386.rpm
checksum_type: sha
description:
  This package adds C++ support to the GNU Compiler Collection.
  It includes support for most of the current C++ specification,
  including templates and exception handling.


pkgId: fff74853b5186e0255d3467c1095fa045424ecd4
name: zzuf
arch: i386
version: 0.8.1
epoch: 0
release: 1.fc7
summary: Transparent application input fuzzer
url: http://sam.zoy.org/zzuf/
rpm_license: WTFPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: zzuf-0.8.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/zzuf-0.8.1-1.fc7.i386.rpm
checksum_type: sha
description:
  zzuf is a transparent application input fuzzer.  It works by
  intercepting file operations and changing random bits in the program's
  input.  zzuf's behaviour is deterministic, making it easy to reproduce
  bugs.


pkgId: 2be4a9fa95535e78628c507b88e491d65d3ece58
name: ktorrent
arch: i386
version: 2.1.4
epoch: 0
release: 1.fc7
summary: A BitTorrent program for KDE
url: http://ktorrent.pwsp.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ktorrent-2.1.4-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ktorrent-2.1.4-1.fc7.i386.rpm
checksum_type: sha
description:
  KTorrent is a BitTorrent program for KDE. Its main features are native KDE
  integration, download of torrent files, upload speed capping, internet
  searching using various search engines, UDP Trackers and UPnP support.


pkgId: e4cd232eb72715b19c0dff0f9356fc19c1d46569
name: fedora-usermgmt-core
arch: noarch
version: 0.9
epoch: 0
release: 2.fc7
summary: Core utilities for the fedora-usermgmt
url: http://fedoraproject.org/wiki/PackageUserCreation
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: fedora-usermgmt-0.9-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fedora-usermgmt-core-0.9-2.fc7.noarch.rpm
checksum_type: sha
description:
  This package provides wrapper around the useradd/-del and groupadd/-del
  programs to allow predictable uids/gids.


pkgId: fa23c0b50d83f53d7eeead47df353a3760798590
name: php-ncurses
arch: i386
version: 5.2.2
epoch: 0
release: 3
summary: A module for PHP applications for using ncurses interfaces
url: http://www.php.net/
rpm_license: The PHP License v3.01
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: php-5.2.2-3.src.rpm
rpm_packager: Koji
location_href: Fedora/php-ncurses-5.2.2-3.i386.rpm
checksum_type: sha
description:
  The php-ncurses package contains a dynamic shared object that will add
  support for using the ncurses terminal output interfaces.


pkgId: e6a8c56a69f1c46d2837b3509cb59aa86bde9b71
name: ghostscript
arch: i386
version: 8.15.4
epoch: 0
release: 3.fc7
summary: A PostScript(TM) interpreter and renderer.
url: http://www.cups.org/espgs/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: ghostscript-8.15.4-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ghostscript-8.15.4-3.fc7.i386.rpm
checksum_type: sha
description:
  Ghostscript is a set of software that provides a PostScript(TM)
  interpreter, a set of C procedures (the Ghostscript library, which
  implements the graphics capabilities in the PostScript language) and
  an interpreter for Portable Document Format (PDF) files. Ghostscript
  translates PostScript code into many common, bitmapped formats, like
  those understood by your printer or screen. Ghostscript is normally
  used to display PostScript files and to print PostScript files to
  non-PostScript printers.

  If you need to display PostScript files or print them to
  non-PostScript printers, you should install ghostscript. If you
  install ghostscript, you also need to install the ghostscript-fonts
  package.


pkgId: a3d9931ba23b7773d1fce3bf673072dcbf7f28c1
name: stonith
arch: i386
version: 2.0.8
epoch: 0
release: 1.fc7
summary: Provides an interface to Shoot The Other Node In The Head
url: http://linux-ha.org/
rpm_license: GPL/LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: heartbeat-2.0.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/stonith-2.0.8-1.fc7.i386.rpm
checksum_type: sha
description:
  The STONITH module (a.k.a. STOMITH) provides an extensible interface
  for remotely powering down a node in the cluster.  The idea is quite simple:
  When the software running on one machine wants to make sure another
  machine in the cluster is not using a resource, pull the plug on the other
  machine. It's simple and reliable, albeit admittedly brutal.


pkgId: 42ee523b7aafac652e8a1c3584e9920a03b693fb
name: fonts-ISO8859-2-75dpi
arch: noarch
version: 1.0
epoch: 0
release: 17.1
summary: A set of 75dpi Central European language fonts for X.
rpm_license: Freely distributable
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: fonts-ISO8859-2-1.0-17.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fonts-ISO8859-2-75dpi-1.0-17.1.noarch.rpm
checksum_type: sha
description:
  This package contains a set of Central European language fonts in 75 dpi
  resolution for the X Window System.


pkgId: 5430a249aa174bf8235dbcea3d2d82a2989b28b1
name: ccrtp
arch: i386
version: 1.5.1
epoch: 0
release: 1.fc7
summary: Common C++ class framework for RTP/RTCP
url: http://www.gnu.org/software/commoncpp/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ccrtp-1.5.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ccrtp-1.5.1-1.fc7.i386.rpm
checksum_type: sha
description:
  ccRTP is a generic, extensible and efficient C++ framework for
  developing applications based on the Real-Time Transport Protocol
  (RTP) from the IETF. It is based on Common C++ and provides a full
  RTP/RTCP stack for sending and receiving of realtime data by the use
  of send and receive packet queues. ccRTP supports unicast,
  multi-unicast and multicast, manages multiple sources, handles RTCP
  automatically, supports different threading models and is generic as
  for underlying network and transport protocols.


pkgId: daf43912149e57243b5582d7bab32e713cebccb5
name: mono-data
arch: i386
version: 1.2.3
epoch: 0
release: 3.fc7
summary: Database connectivity for Mono
url: http://www.mono-project.com/
rpm_license: GPL, LGPL, MIT X11
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: mono-1.2.3-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mono-data-1.2.3-3.fc7.i386.rpm
checksum_type: sha
description:
  This package provides a Mono assembly to facilitate data access
  and manipulation with databases, LDAP compatible directory servers
  and/or XML data exchange. Beyond the ADO.NET, Novell.LDAP and
  System.DirectoryServices assemblies, it also includes a command
  line sql application as well as the Microsoft SQL Server and ODBC
  data providers.


pkgId: b4e71aa13e26afda2aeae5c627ca3442383dadd3
name: agrep
arch: i386
version: 0.7.5
epoch: 0
release: 1.fc7
summary: Approximate grep utility
url: http://laurikari.net/tre/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Applications/Text
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tre-0.7.5-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/agrep-0.7.5-1.fc7.i386.rpm
checksum_type: sha
description:
  The agrep tool is similar to the commonly used grep utility, but agrep
  can be used to search for approximate matches.

  The agrep tool searches text input for lines (or records separated by
  strings matching arbitrary regexps) that contain an approximate, or
  fuzzy, match to a specified regexp, and prints the matching lines.
  Limits can be set on how many errors of each kind are allowed, or
  only the best matching lines can be output.

  Unlike other agrep implementations, TRE agrep allows full POSIX
  regexps of any length, any number of errors, and non-uniform costs.


pkgId: 500be8312e66ab06b59a5a0997cf3ca5c26d329d
name: rudeconfig-devel
arch: i386
version: 5.0.5
epoch: 0
release: 1.fc7
summary: Development files for rudeconfig
url: http://www.rudeserver.com/config
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: rudeconfig-5.0.5-1.fc7.src.rpm
location_href: Fedora/rudeconfig-devel-5.0.5-1.fc7.i386.rpm
checksum_type: sha
description:
  rudeconfig is a library that allows applications to read, modify
  and create configuration/.ini files. The rudeconfig-devel package
  contains libraries, header files, and documentation needed
  to develop C++ applications using rudeconfig.


pkgId: e605b8f606952c965fa4b9cbbea7d6a123f63829
name: mod_geoip
arch: i386
version: 1.1.8
epoch: 0
release: 2.fc6
summary: GeoIP module for the Apache HTTP Server
url: http://www.maxmind.com/app/mod_geoip
rpm_license: Apache Software License
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: mod_geoip-1.1.8-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mod_geoip-1.1.8-2.fc6.i386.rpm
checksum_type: sha
description:
  mod_geoip is an Apache module for finding the country that a web request
  originated from.  It uses the GeoIP library and database to perform
  the lookup.  It is free software, licensed under the Apache license.


pkgId: 58e7dad11178eb0b217d61b725001d94f034706a
name: perl-Text-CharWidth
arch: i386
version: 0.04
epoch: 0
release: 2.fc7
summary: Get number of occupied columns of a string on terminal
url: http://search.cpan.org/dist/Text-CharWidth/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-Text-CharWidth-0.04-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Text-CharWidth-0.04-2.fc7.i386.rpm
checksum_type: sha
description:
  This is a module to provide equivalent feature as wcwidth(3) and
  wcswidth(3).  This also provides mblen(3) equivalent subroutine.


pkgId: 42e6e7046526f5f6bec325e4fa6e602a662cd679
name: libmudflap-devel
arch: i386
version: 4.1.2
epoch: 0
release: 12
summary: GCC mudflap support
url: http://gcc.gnu.org
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: gcc-4.1.2-12.src.rpm
rpm_packager: Koji
location_href: Fedora/libmudflap-devel-4.1.2-12.i386.rpm
checksum_type: sha
description:
  This package contains headers and static libraries for building
  mudflap-instrumented programs.

  To instrument a non-threaded program, add -fmudflap
  option to GCC and when linking add -lmudflap, for threaded programs
  also add -fmudflapth and -lmudflapth.


pkgId: c9699b8154ee2fd804a6312b9507d9b0694a110f
name: python-dns
arch: noarch
version: 1.5.0
epoch: 0
release: 1.fc7
summary: DNS toolkit for Python
url: http://www.dnspython.org/
rpm_license: BSD-like
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: python-dns-1.5.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-dns-1.5.0-1.fc7.noarch.rpm
checksum_type: sha
description:
  dnspython is a DNS toolkit for Python. It supports almost all record
  types. It can be used for queries, zone transfers, and dynamic
  updates. It supports TSIG authenticated messages and EDNS0.

  dnspython provides both high and low level access to DNS. The high
  level classes perform queries for data of a given name, type, and
  class, and return an answer set. The low level classes allow direct
  manipulation of DNS zones, messages, names, and records.


pkgId: b8077a85704cdac90895295489a5f47753ad1dac
name: rxvt
arch: i386
version: 2.7.10
epoch: 0
release: 11.fc6
summary: ouR XVT, a VT102 emulator for the X window system
url: http://www.rxvt.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/X
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: rxvt-2.7.10-11.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rxvt-2.7.10-11.fc6.i386.rpm
checksum_type: sha
description:
  rxvt,  version  2.7.10, is a colour vt102 terminal emulator
  intended as an xterm(1) replacement for users who  do  not
  require  features  such  as  Tektronix  4014 emulation and
  toolkit-style configurability.  As  a  result,  rxvt  uses
  much  less  swap  space  --  a  significant advantage on a
  machine serving many X sessions.


pkgId: 1ef5f4c96e0f80b233d5306fae4df09a4469811a
name: python-docutils
arch: noarch
version: 0.4
epoch: 0
release: 4.fc7
summary: A system for processing plaintext documentation
url: http://docutils.sourceforge.net
rpm_license: Public Domain, BSD, Python License, GPL - see COPYING.txt
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: python-docutils-0.4-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-docutils-0.4-4.fc7.noarch.rpm
checksum_type: sha
description:
  The Docutils project specifies a plaintext markup language, reStructuredText,
  which is easy to read and quick to write.  The project includes a python
  library to parse rST files and transform them into other useful formats such
  as HTML, XML, and TeX as well as commandline tools that give the enduser
  access to this functionality.

  Currently, the library supports parsing rST that is in standalone files and
  PEPs (Python Enhancement Proposals).  Work is underway to parse rST from
  Python inline documentation modules and packages.


pkgId: 310d5905bebac745d8bf05e6f90d6b5979c3d1cf
name: fltk
arch: i386
version: 1.1.8
epoch: 0
release: 0.3.r5750.fc7
summary: C++ user interface toolkit
url: http://www.fltk.org/
rpm_license: LGPL with exceptions
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: fltk-1.1.8-0.3.r5750.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fltk-1.1.8-0.3.r5750.fc7.i386.rpm
checksum_type: sha
description:
  FLTK (pronounced "fulltick") is a cross-platform C++ GUI toolkit.
  It provides modern GUI functionality without the bloat, and supports
  3D graphics via OpenGL and its built-in GLUT emulation.


pkgId: f8a8c08f361666430245be72693a00c986335185
name: php-pear-Payment-Process
arch: noarch
version: 0.6.5
epoch: 0
release: 1.fc6
summary: Unified payment processor
url: http://pear.php.net/package/Payment_Process
rpm_license: PHP License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.phx.redhat.com
rpm_sourcerpm: php-pear-Payment-Process-0.6.5-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/php-pear-Payment-Process-0.6.5-1.fc6.noarch.rpm
checksum_type: sha
description:
  Payment_Process is a gateway-independent framework for processing credit
  cards, e-checks and eventually other forms of payments as well.


pkgId: 6d70090fc693d01fcce042609bb58bb48eda3404
name: stellarium-doc
arch: i386
version: 0.8.2
epoch: 0
release: 5.fc7
summary: The user guide about Stellarium
url: http://stellarium.free.fr/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Documentation
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: stellarium-0.8.2-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/stellarium-doc-0.8.2-5.fc7.i386.rpm
checksum_type: sha
description:
  The user guide for stellarium writeen by Matthew Gates. It shouuld
  contains everythings you want to know about Stellarium.

  You will need a PDF viewer to read the user guide.


pkgId: 036f542da38710f3f2875b29fe67f98f133a4c8d
name: latex-mk
arch: noarch
version: 1.8
epoch: 0
release: 2.fc7
summary: Makefile fragments and shell scripts for latex
url: http://latex-mk.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Text
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: latex-mk-1.8-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/latex-mk-1.8-2.fc7.noarch.rpm
checksum_type: sha
description:
  LaTeX-Mk is a collection of makefile fragments and shell scripts for
  simplifying the management of small to large sized LaTeX documents.


pkgId: 218b2c492e9a6794b2b21bd8323bc39dbb266f47
name: perl-Proc-Daemon
arch: noarch
version: 0.03
epoch: 0
release: 1.fc7.1
summary: Run Perl program as a daemon process
url: http://search.cpan.org/dist/Proc-Daemon/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: perl-Proc-Daemon-0.03-1.fc7.1.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Proc-Daemon-0.03-1.fc7.1.noarch.rpm
checksum_type: sha
description:
  This is version 0.03 of Proc::Daemon

  This module contains the routine Init which can be called by a Perl
  program to initialize itself as a daemon. A daemon is a process that
  runs in the background with no controlling terminal. Generally servers
  (like FTP and HTTP servers) run as daemon processes.


pkgId: ff71b6b11793316a2ea16490245385619017ba2e
name: monsterz
arch: i386
version: 0.7.0
epoch: 0
release: 7.fc6
summary: Puzzle game, similar to Bejeweled or Zookeeper
url: http://sam.zoy.org/monsterz/
rpm_license: WTFPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: monsterz-0.7.0-7.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/monsterz-0.7.0-7.fc6.i386.rpm
checksum_type: sha
description:
  Monsterz is a little arcade puzzle game, similar to the famous Bejeweled or
  Zookeeper. The goal of the game is to create rows of similar monsters, either
  horizontally or vertically. The only allowed move is the swap of two adjacent
  monsters, on the condition that it creates a row of three or more. When
  alignments are cleared, pieces fall from the top of the screen to fill the
  board again. Chain reactions earn you even more points.


pkgId: 6e56b4fbe3c107090a1d43e84a21a435c2ac3f70
name: libthai
arch: i386
version: 0.1.7
epoch: 0
release: 5.fc7
summary: Thai language support routines
url: http://linux.thai.net
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: libthai-0.1.7-5.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libthai-0.1.7-5.fc7.i386.rpm
checksum_type: sha
description:
  LibThai is a set of Thai language support routines aimed to ease
  developers' tasks to incorporate Thai language support in their applications.
  It includes important Thai-specific functions e.g. word breaking, input and
  output methods as well as basic character and string supports.


pkgId: 6b0d92e05b3f7f2b8aaebf954e56ed7239b9a865
name: conserver
arch: i386
version: 8.1.16
epoch: 0
release: 1.fc7
summary: Serial console server daemon/client
url: http://www.conserver.com/
rpm_license: Distributable
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: conserver-8.1.16-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/conserver-8.1.16-1.fc7.i386.rpm
checksum_type: sha
description:
  Conserver is an application that allows multiple users to watch a serial
  console at the same time.  It can log the data, allows users to take
  write-access of a console (one at a time), and has a variety of bells
  and whistles to accentuate that basic functionality.


pkgId: 4c2fd3a6e1a21300071134947349501ca5d0b9fc
name: libgnomemm26
arch: i386
version: 2.18.0
epoch: 0
release: 1
summary: C++ interface for Gnome libs (a GUI library for X)
url: http://gtkmm.sourceforge.net/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: libgnomemm26-2.18.0-1.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgnomemm26-2.18.0-1.i386.rpm
checksum_type: sha
description:
  This package provides a C++ interface for GnomeUI.  It is a subpackage
  of the Gtk-- project.  The interface provides a convenient interface for C++
  programmers to create Gnome GUIs with GTK+'s flexible object-oriented
  framework.


pkgId: b7538a7076d6f47a1da3c589250647aefcfb2749
name: rrdtool-doc
arch: i386
version: 1.2.23
epoch: 0
release: 3.fc7
summary: RRDtool documentation
url: http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Documentation
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: rrdtool-1.2.23-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/rrdtool-doc-1.2.23-3.fc7.i386.rpm
checksum_type: sha
description:
  RRD is the Acronym for Round Robin Database. RRD is a system to store and
  display time-series data (i.e. network bandwidth, machine-room temperature,
  server load average). This package contains documentation on using RRD.


pkgId: 2c255e6522c8a42159ef35c86ee81b75f752a989
name: tla
arch: i386
version: 1.3.4
epoch: 0
release: 5.fc6
summary: GNU arch revision control system
url: http://www.gnu.org/software/gnu-arch/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: tla-1.3.4-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tla-1.3.4-5.fc6.i386.rpm
checksum_type: sha
description:
  GNU arch is a revision control system, similar in purpose to tools
  such as CVS, SCCS, and Subversion.  It is used to keep track of the
  changes made to a source tree and to help programmers combine and
  otherwise manipulate changes made by multiple people or at different
  times.  GNU arch has some features that make it particularly useful
  for public free software projects: it's easy to learn; it's
  inexpensive and easy to administer; it's a distributed system so
  there's no need to give write permission to every project participant;
  it has excellent support for the kinds of branching and merging that
  can make a free software project team shine.


pkgId: 4d287c3de41d77b19a29410e267d2a482c46caf2
name: jigdo
arch: i386
version: 0.7.3
epoch: 0
release: 3.fc7
summary: Ease distribution of large files over the Internet
url: http://atterer.net/jigdo/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: jigdo-0.7.3-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/jigdo-0.7.3-3.fc7.i386.rpm
checksum_type: sha
description:
  Jigsaw Download, or short jigdo, is a tool designed to ease the
  distribution of very large files over the internet, for example CD or
  DVD images.  Its aim is to make downloading the images as easy for
  users as a click on a direct download link in a browser, while
  avoiding all the problems that server administrators have with hosting
  such large files.  It accomplishes this by using the separate pieces
  of any big file (such as the files contained within a CD/DVD image) to
  create a special "template" file which makes reassembly of the big
  file very easy for users who only have the pieces.


pkgId: 8ae95d287236f4227f30eab3364ab51004c8c659
name: python-tag
arch: i386
version: 0.91
epoch: 0
release: 3.fc7
summary: Python bindings for TagLib to read and write music files tags
url: http://news.tiker.net/software/tagpy
rpm_license: BSD
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: python-tag-0.91-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/python-tag-0.91-3.fc7.i386.rpm
checksum_type: sha
description:
  TagPy is a Python crust (or a set of Python bindings) for TagLib, which allows
  to read and write ID3 tags of version 1 and 2, access Xiph Comments in Ogg
  Vorbis Files and Ogg Flac Files and access APE tags in Musepack and MP3 files.


pkgId: 77973f153426c92e61c6c9fa4cc36af5eb288dc9
name: perl-Class-Prototyped
arch: noarch
version: 1.10
epoch: 0
release: 2.fc7
summary: Fast prototype-based OO programming in Perl
url: http://search.cpan.org/dist/Class-Prototyped/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-Class-Prototyped-1.10-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Class-Prototyped-1.10-2.fc7.noarch.rpm
checksum_type: sha
description:
  This package provides for efficient and simple prototype-based programming
  in Perl. You can provide different subroutines for each object, and also
  have objects inherit their behavior and state from another object.


pkgId: 2fec036186f4552575a16ebfec505edb0a3b0f2f
name: AGReader
arch: i386
version: 1.2
epoch: 0
release: 2.fc6
summary: Console reader for viewing AmigaGuide files
url: http://main.aminet.net/misc/unix/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Text
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: AGReader-1.2-2.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/AGReader-1.2-2.fc6.i386.rpm
checksum_type: sha
description:
  A viewer for the UNIX console which can read and display AmigaGuide files. It
  supports all of the v39 AmigaGuide specification possible and supports a large
  subset of the v40 specifications.


pkgId: d85be655d4460faa4d01408130271cd63cc2428b
name: nyquist
arch: i386
version: 2.36
epoch: 0
release: 1.fc7
summary: Sound synthesis and composition language with a Lisp syntax
url: http://www-2.cs.cmu.edu/~music/music.software.html
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: nyquist-2.36-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/nyquist-2.36-1.fc7.i386.rpm
checksum_type: sha
description:
  Nyquist is a language for sound synthesis and music
  composition. Unlike score languages that tend to deal only with
  events, or signal processing languages that tend to deal only with
  signals and synthesis, Nyquist handles both in a single integrated
  system. Nyquist is also flexible and easy to use because it is based
  on an interactive Lisp interpreter.


pkgId: 2a013b57fbdf5092e3be8dfb544a20b3b8910d5f
name: perl-Text-Unidecode
arch: noarch
version: 0.04
epoch: 0
release: 4.fc6
summary: US-ASCII transliterations of Unicode text
url: http://search.cpan.org/dist/Text-Unidecode/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc1.fedora.phx.redhat.com
rpm_sourcerpm: perl-Text-Unidecode-0.04-4.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Text-Unidecode-0.04-4.fc6.noarch.rpm
checksum_type: sha
description:
  Text::Unidecode provides a function, `unidecode(...)' that
  takes Unicode data and tries to represent it in US-ASCII
  characters (i.e., the universally displayable characters between
  0x00 and 0x7F). The representation is almost always an attempt at
  *transliteration* -- i.e., conveying, in Roman letters, the
  pronunciation expressed by the text in some other writing
  system.


pkgId: 2ed35808e1e22365ed0aeeaad96a816dacef213b
name: perl-POE-Component-Server-XMLRPC
arch: noarch
version: 0.05
epoch: 0
release: 3.fc6
summary: Publish POE event handlers via XMLRPC over HTTP
url: http://search.cpan.org/dist/POE-Component-Server-XMLRPC/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: perl-POE-Component-Server-XMLRPC-0.05-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-POE-Component-Server-XMLRPC-0.05-3.fc6.noarch.rpm
checksum_type: sha
description:
  POE::Component::Server::XMLRPC is a bolt-on component that can publish a
  event handlers via XMLRPC over HTTP.


pkgId: 60369fedb1e7a5b4071a14acf9e4ef279854592c
name: tclx
arch: i386
version: 8.4.0
epoch: 0
release: 7.fc7
summary: Extensions for Tcl and Tk
url: http://tclx.sourceforge.net/
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: tclx-8.4.0-7.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tclx-8.4.0-7.fc7.i386.rpm
checksum_type: sha
description:
  Extended Tcl (TclX) is a set of extensions to the Tcl programming language.
  Extended Tcl is oriented towards system programming tasks and large
  application development.  TclX provides additional interfaces to the
  operating system, and adds many new programming constructs, text manipulation
  and debugging tools.
  This package contains the tclx documentation.


pkgId: 9a3b3270b9144d9d7ce1675836f5eda415669658
name: gdl
arch: i386
version: 0.9
epoch: 0
release: 0.pre4.1.fc7
summary: GNU Data Language
url: http://gnudatalanguage.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: gdl-0.9-0.pre4.1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gdl-0.9-0.pre4.1.fc7.i386.rpm
checksum_type: sha
description:
  A free IDL (Interactive Data Language) compatible incremental compiler
  (ie. runs IDL programs). IDL is a registered trademark of Research
  Systems Inc.


pkgId: a78f3c336f01ad394f81d250e30410a1c275d006
name: texinfo-tex
arch: i386
version: 4.8
epoch: 0
release: 15
summary: Tools for fromating Texinfo documentation files using TeX
url: http://www.gnu.org/software/texinfo/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Publishing
rpm_buildhost: ls20-bc2-14.build.redhat.com
rpm_sourcerpm: texinfo-4.8-15.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/texinfo-tex-4.8-15.i386.rpm
checksum_type: sha
description:
  Texinfo is a documentation system that can produce both online
  information and printed output from a single source file. The GNU
  Project uses the Texinfo file format for most of its documentation.

  The texinfo-tex package provides tools to format Texinfo documents
  for printing using TeX.


pkgId: 9e02ab3271f05f290043ced26d212b6bbf7c8318
name: tk
arch: i386
version: 8.4.13
epoch: 1
release: 5.fc7
summary: The graphical toolkit for the Tcl scripting language
url: http://tcl.sourceforge.net
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: tk-8.4.13-5.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tk-8.4.13-5.fc7.i386.rpm
checksum_type: sha
description:
  When paired with the Tcl scripting language, Tk provides a fast and powerful
  way to create cross-platform GUI applications.


pkgId: e87b77fa1d1cd079cc2771827b7ca5780e843f9d
name: phpMyAdmin
arch: noarch
version: 2.10.0.2
epoch: 0
release: 3.fc7
summary: Web based MySQL browser written in php
url: http://www.phpmyadmin.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: phpMyAdmin-2.10.0.2-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/phpMyAdmin-2.10.0.2-3.fc7.noarch.rpm
checksum_type: sha
description:
  phpMyAdmin is a tool written in PHP intended to handle the administration of
  MySQL over the Web. Currently it can create and drop databases,
  create/drop/alter tables, delete/edit/add fields, execute any SQL statement,
  manage keys on fields, manage privileges,export data into various formats and
  is available in 50 languages


pkgId: 81a7b60ca117d7a9d7789d81b8f83f334d5118cb
name: elfutils-libelf
arch: i386
version: 0.127
epoch: 0
release: 1.fc7
summary: Library to read and write ELF files.
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Tools
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: elfutils-0.127-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/elfutils-libelf-0.127-1.fc7.i386.rpm
checksum_type: sha
description:
  The elfutils-libelf package provides a DSO which allows reading and
  writing ELF files on a high level.  Third party programs depend on
  this package to read internals of ELF files.  The programs of the
  elfutils package use it also to generate new ELF files.


pkgId: d1b59d1428e5b5a9cbd1c6569dcc8f4f005723bb
name: gcstar
arch: noarch
version: 1.1.1
epoch: 0
release: 2.fc7
summary: Personal collections manager
url: http://www.gcstar.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Databases
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: gcstar-1.1.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gcstar-1.1.1-2.fc7.noarch.rpm
checksum_type: sha
description:
  GCstar is an application for managing your personal collections.
  Detailed information on each item can be automatically retrieved
  from the internet and you can store additional data, depending on
  the collection type. And also who you've lent your them to. You
  may also search and filter your collection by criteria.


pkgId: eba9b56f683ba16b4a53630bc7631316f7f70bd5
name: tetrinetx
arch: i386
version: 1.13.16
epoch: 0
release: 2.fc7
summary: The GNU TetriNET server
url: http://tetrinetx.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tetrinetx-1.13.16-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tetrinetx-1.13.16-2.fc7.i386.rpm
checksum_type: sha
description:
  Tetrinetx is the GNU TetriNET server written in C. It includes IRC and
  Spectator supports. As many other tetrinet servers, it uses IP independent
  decryption which allows the server to run behind a router.

  TetriNET is a network-based, multiplayer falling bricks game. This package
  contains a server for hosting TetriNET games over a public or private network.


pkgId: e4ce236ab953fb832119190fb740201f05280010
name: xorg-x11-server-Xdmx
arch: i386
version: 1.3.0.0
epoch: 0
release: 5.fc7
summary: Distributed Multihead X Server and utilities
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Koji
rpm_group: User Interface/X
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: xorg-x11-server-1.3.0.0-5.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/xorg-x11-server-Xdmx-1.3.0.0-5.fc7.i386.rpm
checksum_type: sha
description:
  Xdmx is proxy X server that provides multi-head support for multiple displays
  attached to different machines (each of which is running a typical X server).
  When Xinerama is used with Xdmx, the multiple displays on multiple machines
  are presented to the user as a single unified screen.  A simple application
  for Xdmx would be to provide multi-head support using two desktop machines,
  each of which has a single display device attached to it.  A complex
  application for Xdmx would be to unify a 4 by 4 grid of 1280x1024 displays
  (each attached to one of 16 computers) into a unified 5120x4096 display.


pkgId: d188a3d1038a214c0916f28416f9c75dc25b625d
name: ldirectord
arch: i386
version: 2.0.8
epoch: 0
release: 1.fc7
summary: Monitor daemon for maintaining high availability resources
url: http://linux-ha.org/
rpm_license: GPL/LGPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: heartbeat-2.0.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ldirectord-2.0.8-1.fc7.i386.rpm
checksum_type: sha
description:
  ldirectord is a stand-alone daemon to monitor services of real
  for virtual services provided by The Linux Virtual Server
  (http://www.linuxvirtualserver.org/). It is simple to install
  and works with the heartbeat code (http://www.linux-ha.org/).


pkgId: 59a6cfeab03d38b12d4dd5c0bd6f9acac70a8383
name: python-zope-interface
arch: i386
version: 3.0.1
epoch: 0
release: 7.fc7
summary: Zope interfaces package
url: http://zope.org/Products/ZopeInterface
rpm_license: Zope Public License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: python-zope-interface-3.0.1-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-zope-interface-3.0.1-7.fc7.i386.rpm
checksum_type: sha
description:
  This is a separate distribution of the zope.interface package used in Zope 3.

  It includes a patch to fix compilation on gcc 4.x, as described here:
  http://www.zope.org/Collectors/Zope3-dev/366/


pkgId: 9c882e9fd7febabdaad3d8976b109c0b9abb5f24
name: claws-mail-plugins-perl
arch: i386
version: 2.9.1
epoch: 0
release: 1.fc7
summary: Extended filtering engine
url: http://claws-mail.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: claws-mail-plugins-2.9.1-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/claws-mail-plugins-perl-2.9.1-1.fc7.i386.rpm
checksum_type: sha
description:
  This plugin provides an extended filtering engine for the email client
  claws-mail. It allows for the use of full perl power in email filters.


pkgId: 4409088a16a8d13623a3edc5f86af90e1461a630
name: cups-pdf
arch: i386
version: 2.4.6
epoch: 0
release: 1.fc7
summary: Extension for creating pdf-Files with CUPS
url: http://cip.physik.uni-wuerzburg.de/~vrbehr/cups-pdf/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Publishing
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: cups-pdf-2.4.6-1.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/cups-pdf-2.4.6-1.fc7.i386.rpm
checksum_type: sha
description:
  "cups-pdf" is a backend script for use with CUPS - the "Common UNIX Printing
  System" (see more for CUPS under http://www.cups.org/).
  "cups-pdf" uses the ghostscript pdfwrite device to produce PDF Files.

  This version has been modified to store the PDF files on the Desktop of the
  user. This behavior can be changed by editing the configuration file.


pkgId: 1328f33f28675ec2c5e3ab1bfe45c577117e6809
name: nc
arch: i386
version: 1.84
epoch: 0
release: 12.fc7
summary: Reads and writes data across network connections using TCP or UDP
url: http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/nc/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: nc-1.84-12.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/nc-1.84-12.fc7.i386.rpm
checksum_type: sha
description:
  The nc package contains Netcat (the program is actually nc), a simple
  utility for reading and writing data across network connections, using
  the TCP or UDP protocols. Netcat is intended to be a reliable back-end
  tool which can be used directly or easily driven by other programs and
  scripts.  Netcat is also a feature-rich network debugging and
  exploration tool, since it can create many different connections and
  has many built-in capabilities.

  You may want to install the netcat package if you are administering a
  network and you'd like to use its debugging and network exploration
  capabilities.


pkgId: 2a2cf21d54b724d53f8ec1aac9ea6cde0dcbc0fd
name: python-twisted-conch
arch: i386
version: 0.7.0
epoch: 0
release: 4.fc7
summary: Twisted SSHv2 implementation
url: http://twistedmatrix.com/trac/wiki/TwistedConch
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: python-twisted-conch-0.7.0-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/python-twisted-conch-0.7.0-4.fc7.i386.rpm
checksum_type: sha
description:
  Twisted is an event-based framework for internet applications.

  Conch is an SSHv2 implementation written in Python. SSH is a protocol designed
  to allow remote access to shells and commands, but it is generic enough to
  allow everything from TCP forwarding to generic filesystem access. Since conch
  is written in Python, it interfaces well with other Python projects, such as
  Imagination. Conch also includes a implementations of the telnet and vt102
  protocols, as well as support for rudamentary line editing behaviors. A new
  implementation of Twisted's Manhole application is also included, featuring
  server-side input history and interactive syntax coloring.


pkgId: 1a3ebfba424cd59ff42cafb2013d0b71d51aaa02
name: xfce4-wavelan-plugin
arch: i386
version: 0.5.4
epoch: 0
release: 2.fc7
summary: WaveLAN plugin for the Xfce panel
url: http://goodies.xfce.org/projects/panel-plugins/xfce4-wavelan-plugin
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xfce4-wavelan-plugin-0.5.4-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xfce4-wavelan-plugin-0.5.4-2.fc7.i386.rpm
checksum_type: sha
description:
  A plugin for the Xfce panel that monitors a wireless LAN interface. It
  displays stats for signal state, signal quality and network name (SSID).


pkgId: ef620efe1292a1a2c084a16ff5fd2984d5f108a6
name: xemacs-packages-extra-info
arch: noarch
version: 20061221
epoch: 0
release: 1.fc7
summary: XEmacs packages documentation in GNU texinfo format
url: http://www.xemacs.org/Documentation/packageGuide.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Documentation
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: xemacs-packages-extra-20061221-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xemacs-packages-extra-info-20061221-1.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains optional documentation for the XEmacs packages
  collection in GNU texinfo format


pkgId: 348d07d57f95a3e3b2969079e4795b040c927d26
name: fftw-devel
arch: i386
version: 3.1.2
epoch: 0
release: 3.fc6
summary: Headers, libraries and docs for the FFTW library
url: http://www.fftw.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.redhat.com
rpm_sourcerpm: fftw-3.1.2-3.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fftw-devel-3.1.2-3.fc6.i386.rpm
checksum_type: sha
description:
  FFTW is a C subroutine library for computing the Discrete Fourier
  Transform (DFT) in one or more dimensions, of both real and complex
  data, and of arbitrary input size.

  This package contains header files and development libraries needed to
  develop programs using the FFTW fast Fourier transform library.


pkgId: 471c8cc17377c9d6392fd840f7f97ce50a818977
name: libart_lgpl-devel
arch: i386
version: 2.3.19
epoch: 0
release: 2.fc7
summary: Libraries and headers for libart_lgpl
url: http://www.gnome.org/
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: libart_lgpl-2.3.19-2.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libart_lgpl-devel-2.3.19-2.fc7.i386.rpm
checksum_type: sha
description:
  Graphics routines used by the GnomeCanvas widget and some other
  applications. libart renders vector paths and the like.


pkgId: 8a73709c5202f78aa4a639534011659905580751
name: lapack
arch: i386
version: 3.1.0
epoch: 0
release: 4.fc7
summary: The LAPACK libraries for numerical linear algebra.
url: http://www.netlib.org/lapack/
rpm_license: Freely distributable
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: lapack-3.1.0-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lapack-3.1.0-4.fc7.i386.rpm
checksum_type: sha
description:
  LAPACK (Linear Algebra PACKage) is a standard library for numerical
  linear algebra. LAPACK provides routines for solving systems of
  simultaneous linear equations, least-squares solutions of linear
  systems of equations, eigenvalue problems, and singular value
  problems. Associated matrix factorizations (LU, Cholesky, QR, SVD,
  Schur, and generalized Schur) and related computations (i.e.,
  reordering of Schur factorizations and estimating condition numbers)
  are also included. LAPACK can handle dense and banded matrices, but
  not general sparse matrices. Similar functionality is provided for
  real and complex matrices in both single and double precision. LAPACK
  is coded in Fortran77 and built with gcc.


pkgId: 310ef51a3dfa61645bcfb43a8f7b76eef04a6b90
name: pdfcube
arch: i386
version: 0.0.2
epoch: 0
release: 3.fc7
summary: PDF presentation viewer with a spinning cube
url: http://code.100allora.it/pdfcube
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: pdfcube-0.0.2-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pdfcube-0.0.2-3.fc7.i386.rpm
checksum_type: sha
description:
  PDF Cube is an OpenGL API-based PDF viewer that adds a
  compiz/Keynote-like spinning cube trasition effect to your PDF
  presentations (including Latex, Beamer and Prosper). You can also zoom
  on 5 predefined areas of any presentation page with a smooth zooming
  effect.


pkgId: 7bf52d0d077756126b98e51cde74849204a4da96
name: moodle-to
arch: noarch
version: 1.8
epoch: 0
release: 5.fc7
summary: Moodle language pack for Tonga
url: http://moodle.org/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Applications/Publishing
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: moodle-1.8-5.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/moodle-to-1.8-5.fc7.noarch.rpm
checksum_type: sha
description:
  This package contains the files needed to display Moodle in Tonga.
  Currently, only the installer is available in Tonga.


pkgId: 6e20906abb4ef037f6c72b012b44ed0e57e3344f
name: obexftp
arch: i386
version: 0.22
epoch: 0
release: 0.2.pre4
summary: Tool to access devices via the OBEX protocol
url: http://openobex.triq.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/File
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: obexftp-0.22-0.2.pre4.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/obexftp-0.22-0.2.pre4.i386.rpm
checksum_type: sha
description:
  The overall goal of this project is to make mobile devices featuring the OBEX
  protocol and adhering to the OBEX FTP standard accessible by an open source
  implementation. The common usage for ObexFTP is to access your mobile phones
  memory to store and retrieve e.g. your phonebook, logos, ringtones, music,
  pictures and alike.


pkgId: 669e33a075c915b797740d926cc5af34b1675dbe
name: perl-Cache-Mmap
arch: i386
version: 0.09
epoch: 0
release: 2.fc7
summary: Shared data cache using memory mapped files
url: http://search.cpan.org/dist/Cache-Mmap/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-Cache-Mmap-0.09-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Cache-Mmap-0.09-2.fc7.i386.rpm
checksum_type: sha
description:
  This module implements a shared data cache, using memory mapped files. If
  routines are provided which interact with the underlying data, access to
  the cache is completely transparent, and the module handles all the details
  of refreshing cache contents, and updating underlying data, if necessary.


pkgId: 4f466481a97a2d0045b7f1cb42ab9e949ca7484d
name: ttcp
arch: i386
version: 1.12
epoch: 0
release: 15.fc7
summary: A tool for testing TCP connections
url: ftp://ftp.sgi.com/sgi/src/ttcp/
rpm_license: Public Domain
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ls20-bc1-13.build.redhat.com
rpm_sourcerpm: ttcp-1.12-15.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ttcp-1.12-15.fc7.i386.rpm
checksum_type: sha
description:
  ttcp is a tool for testing the throughput of TCP connections.  Unlike other
  tools which might be used for this purpose (such as FTP clients), ttcp does
  not read or write data from or to a disk while operating, which helps ensure
  more accurate results.


pkgId: 6a31876c02933383b15888736663da4a0a727173
name: qt4-devel
arch: i386
version: 4.2.3
epoch: 0
release: 8.fc7
summary: Development files for the Qt toolkit
url: http://www.trolltech.com/products/qt/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: qt4-4.2.3-8.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/qt4-devel-4.2.3-8.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the files necessary to develop
  applications using the Qt toolkit.  Includes:
  Qt Linguist


pkgId: 1e16fd3c54b37a23bffcf7c318c6d4384adb3d60
name: tclsoap
arch: noarch
version: 1.6.7
epoch: 0
release: 4.fc7
summary: Tcl commands for SOAP remote procedure calls
url: http://tclsoap.sourceforge.net/
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: tclsoap-1.6.7-4.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tclsoap-1.6.7-4.fc7.noarch.rpm
checksum_type: sha
description:
  Provides support for building clients and servers for the
  SOAP remote procedure call protocol from Tcl. SOAP is an
  XML based RPC mechanism which provides cross-platform
  cross language compatibility.


pkgId: 19a4594cf6b20d27b1cadc71e8ddbd6c7f16e9af
name: kchmviewer
arch: i386
version: 3.0
epoch: 0
release: 2.fc7
summary: CHM viewer with KDE support
url: http://www.kchmviewer.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Publishing
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: kchmviewer-3.0-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kchmviewer-3.0-2.fc7.i386.rpm
checksum_type: sha
description:
  KchmViewer is a chm (MS HTML help file format) viewer, written in C++.
  Unlike most existing CHM viewers for Unix, it uses Trolltech Qt widget
  library. It is compiled with full KDE support, including KDE widgets
  and KIO/KHTML.


pkgId: 0be83009a4b7d0faf124bce6d482082300bdff11
name: libnfnetlink
arch: i386
version: 0.0.25
epoch: 0
release: 2.fc7
summary: Netfilter netlink userspace library
url: http://netfilter.org
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libnfnetlink-0.0.25-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libnfnetlink-0.0.25-2.fc7.i386.rpm
checksum_type: sha
description:
  libnfnetlink is a userspace library that provides some low-level
  nfnetlink handling functions.  It is used as a foundation for other, netfilter
  subsystem specific libraries such as libnfnetlink_conntrack, libnfnetlink_log
  and libnfnetlink_queue.


pkgId: 40ca256b892da55ee7a31e7217945ab1d2e02e89
name: sblim-wbemcli
arch: i386
version: 1.5.1
epoch: 0
release: 5.fc7
summary: SBLIM WBEM Command Line Interface
url: http://www.sblim.org
rpm_license: CPL
rpm_vendor: Fedora Project
rpm_group: Systems Management/Base
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: sblim-wbemcli-1.5.1-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/sblim-wbemcli-1.5.1-5.fc7.i386.rpm
checksum_type: sha
description:
  WBEM Command Line Interface is a standalone, command line WBEM client. It is
  specially suited for basic systems management tasks as it can be used in
  scripts.


pkgId: 092bf2bef46760dd885bd5bb00d7520294bc75c8
name: licq-auto-reply
arch: i386
version: 1.3.4
epoch: 0
release: 6.fc7
summary: Auto-reply plugin for Licq.
url: http://www.licq.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: licq-1.3.4-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/licq-auto-reply-1.3.4-6.fc7.i386.rpm
checksum_type: sha
description:
  Plugin to automatically respond to any incoming event with the output of a given program, which can be passed user arguments, or event the message text itself. Often used in conjunction with "fortune" to send people fortunes. Also included in the main distribution.


pkgId: 7e94332e717356931dd7d1e22f802ccb13f764e6
name: fonts-KOI8-R-100dpi
arch: noarch
version: 1.0
epoch: 0
release: 9.1.1
summary: KOI8-R fonts in 100 dpi resolution for the X Window System.
rpm_license: distributable
rpm_vendor: Red Hat, Inc.
rpm_group: User Interface/X
rpm_buildhost: hs20-bc2-4.build.redhat.com
rpm_sourcerpm: fonts-KOI8-R-1.0-9.1.1.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fonts-KOI8-R-100dpi-1.0-9.1.1.noarch.rpm
checksum_type: sha
description:
  This package contains a set of Russian and Ukrainian language fonts
  at 100 dpi resolution for the X Window System.

  If you are installing the X Window System and you need to display
  Russian and Ukrainian language characters in 100 dpi resolution, you should
  install this package.


pkgId: 0ebc0540211f49195d623670c3d96381b8cc4d39
name: antiword
arch: i386
version: 0.37
epoch: 0
release: 3
summary: MS Word to ASCII/Postscript converter
url: http://www.winfield.demon.nl/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Text
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: antiword-0.37-3.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/antiword-0.37-3.i386.rpm
checksum_type: sha
description:
  Antiword is a free MS-Word reader for Linux, BeOS and RISC OS. It converts
  the documets from Word 6, 7, 97 and 2000 to ASCII and Postscript. Antiword
  tries to keep the layout of the document intact.


pkgId: 5e426b541ac84905b0bc9e4ad6de5f372efd9748
name: gforth
arch: i386
version: 0.6.2
epoch: 0
release: 10.fc7
summary: Fast and portable implementation of the ANS Forth language
url: http://www.jwdt.com/~paysan/gforth.html
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: gforth-0.6.2-10.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gforth-0.6.2-10.fc7.i386.rpm
checksum_type: sha
description:
  Gforth is a fast and portable implementation of the ANS Forth
  language. It works nicely with the Emacs editor, offers some nice
  features such as input completion and history, backtraces, a
  decompiler and a powerful locals facility, and it even has a
  manual. Gforth combines traditional implementation techniques with
  newer techniques for portability and performance performance: its
  inner innerpreter is direct threaded with several optimizations, but
  you can also use a traditional-style indirect threaded interpreter.


pkgId: c27fa55aaad179e377f846ea3b695b0a84c2892e
name: perl-GD-SVG
arch: noarch
version: 0.28
epoch: 0
release: 1.fc7
summary: GD::SVG enables SVG output from scripts written using GD
url: http://search.cpan.org/dist/GD-SVG/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: perl-GD-SVG-0.28-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-GD-SVG-0.28-1.fc7.noarch.rpm
checksum_type: sha
description:
  GD::SVG seamlessly enables the scalable vector graphics (SVG) output
  from scripts written using GD.  It accomplishes this by translating GD
  functions into SVG functions.


pkgId: 16c1cf1338bbf057571a277569b2360cd657f6d6
name: R-waveslim
arch: i386
version: 1.6
epoch: 0
release: 3.fc7
summary: R module, Basic wavelet routines for 1,2 and 3-dimensional signal processing
url: http://www.image.ucar.edu/staff/whitcher/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Engineering
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: R-waveslim-1.6-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/R-waveslim-1.6-3.fc7.i386.rpm
checksum_type: sha
description:
  Basic wavelet routines for time series (1D), image (2D)
  and array (3D) analysis.  The code provided here is based on
  wavelet methodology developed in Percival and Walden (2000);
  Gencay, Selcuk and Whitcher (2001); the dual-tree complex wavelet
  transform (CWT) from Kingsbury (1999, 2001) as implemented by
  Selesnick; and Hilbert wavelet pairs (Selesnick 2001, 2002).  All
  figures in chapters 4-7 of GSW (2001) are reproducible using this
  package and R code available at the book website(s) below.


pkgId: 57525adc381bae12a661a1dea273f2759ce6ebc6
name: rsnapshot
arch: noarch
version: 1.2.9
epoch: 0
release: 5.fc6
summary: Local and remote filesystem snapshot utility
url: http://www.rsnapshot.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc3.fedora.phx.redhat.com
rpm_sourcerpm: rsnapshot-1.2.9-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rsnapshot-1.2.9-5.fc6.noarch.rpm
checksum_type: sha
description:
  This is a remote backup program that uses rsync to take backup snapshots of
  filesystems.  It uses hard links to save space on disk.


pkgId: 53771086da59c3b9a7df904525ff9ab2aaaa3023
name: yasm
arch: i386
version: 0.6.0
epoch: 0
release: 1.fc7
summary: Complete rewrite of the NASM assembler
url: http://www.tortall.net/projects/yasm/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Languages
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: yasm-0.6.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/yasm-0.6.0-1.fc7.i386.rpm
checksum_type: sha
description:
  Yasm is a complete rewrite of the NASM assembler under the "new" BSD License
  (some portions are under other licenses, see COPYING for details). It is
  designed from the ground up to allow for multiple assembler syntaxes to be
  supported (eg, NASM, TASM, GAS, etc.) in addition to multiple output object
  formats and even multiple instruction sets. Another primary module of the
  overall design is an optimizer module.


pkgId: 36920423604d74d85286a29a6228a156d40523e1
name: kerry
arch: i386
version: 0.2.1
epoch: 0
release: 2.fc7
summary: Kerry Beagle is a KDE frontend for the Beagle desktop search
url: http://www.kde-apps.org/content/show.php?content=36832
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: User Interface/Desktops
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: kerry-0.2.1-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/kerry-0.2.1-2.fc7.i386.rpm
checksum_type: sha
description:
  Kerry Beagle is a nice KDE frontend for the Beagle desktop search daemon, it
  uses indexed searched files from beagle and displays in a KDE way, integrating
  totally with the desktop, systray, and Konqueror.


pkgId: 1eaf3b02f83e0ea428ee9e9f65fae1ddfb0eff59
name: dclib-devel
arch: i386
version: 0.3.8
epoch: 0
release: 2.fc7
summary: Development libraries for Direct Connect
url: http://sourceforge.net/projects/wxdcgui/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: dclib-0.3.8-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dclib-devel-0.3.8-2.fc7.i386.rpm
checksum_type: sha
description:
  This library implements the Direct Connect file sharing protocol.
  The package contains the C++ headers and library to compile programs based
  on dclib.


pkgId: 11cef82401421e39957648b614b1a42281e9d47e
name: zynaddsubfx
arch: i386
version: 2.2.1
epoch: 0
release: 14.fc7
summary: Real-time software synthesizer
url: http://zynaddsubfx.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: zynaddsubfx-2.2.1-14.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/zynaddsubfx-2.2.1-14.fc7.i386.rpm
checksum_type: sha
description:
  ZynAddSubFX is an open source software synthesizer capable of making a
  countless number of instrument sounds.


pkgId: 6adf4310451ed26e2f9902be79e335bc6fc3fb11
name: mt-st
arch: i386
version: 0.9b
epoch: 0
release: 3.fc7
summary: Install mt-st if you need a tool to control tape drives
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/System
rpm_buildhost: hs20-bc1-7.build.redhat.com
rpm_sourcerpm: mt-st-0.9b-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mt-st-0.9b-3.fc7.i386.rpm
checksum_type: sha
description:
  The mt-st package contains the mt and st tape drive management
  programs. Mt (for magnetic tape drives) and st (for SCSI tape devices)
  can control rewinding, ejecting, skipping files and blocks and more.

  Install mt-st if you need a tool to  manage tape drives.


pkgId: 29d3085c86ae9c67ee382a42f8955a510a3bc82a
name: libmp4v2-devel
arch: i386
version: 1.5.0.1
epoch: 0
release: 3.fc7
summary: Development files for the mp4v2 library
url: http://resare.com/libmp4v2/
rpm_license: MPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: libmp4v2-1.5.0.1-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libmp4v2-devel-1.5.0.1-3.fc7.i386.rpm
checksum_type: sha
description:
  Development files and documentation needed to develop and compile programs
  using the libmp4v2 library.


pkgId: 9084ef2f549939049d18b0169e36d281280b3b00
name: perl-Moose-Policy
arch: noarch
version: 0.03
epoch: 0
release: 1.fc7
summary: Police your project/company-wide Moose policies
url: http://search.cpan.org/dist/Moose-Policy/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-Moose-Policy-0.03-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Moose-Policy-0.03-1.fc7.noarch.rpm
checksum_type: sha
description:
  This module allows you to specify your project-wide or even company-wide
  Moose meta-policy.

  Most all of Moose's features can be customized through the use of custom
  metaclasses, however fiddling with the metaclasses can be hairy. Moose::Policy
  removes most of that hairiness and makes it possible to cleanly contain a set
  of meta-level customizations in one easy to use module.

  This is an early release of this module and it should not be considered to be
  complete by any means. It is very basic implemenation at this point and will
  likely get more feature-full over time, as people request features. So if you
  have a suggestion/need/idea, please speak up.


pkgId: fdeec271e267f0f61329972d4527e94986ba4c33
name: facter
arch: noarch
version: 1.3.7
epoch: 0
release: 1.fc7
summary: Ruby module for collecting simple facts about a host operating system
url: http://reductivelabs.com/projects/facter
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: facter-1.3.7-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/facter-1.3.7-1.fc7.noarch.rpm
checksum_type: sha
description:
  Ruby module for collecting simple facts about a host Operating
  system. Some of the facts are preconfigured, such as the hostname and the
  operating system. Additional facts can be added through simple Ruby scripts


pkgId: ac17b4d6b46feef862f3a9db4891cea891aab589
name: perl-String-Approx
arch: i386
version: 3.26
epoch: 0
release: 1.fc7
summary: Perl extension for approximate matching (fuzzy matching)
url: http://search.cpan.org/dist/String-Approx/
rpm_license: LGPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-String-Approx-3.26-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-String-Approx-3.26-1.fc7.i386.rpm
checksum_type: sha
description:
  String::Approx lets you match and substitute strings approximately. With
  this you can emulate errors: typing errorrs, speling errors, closely
  related vocabularies (colour color), genetic mutations (GAG ACT),
  abbreviations (McScot, MacScot).


pkgId: b90dfa00c016f4630534971f514253c90c13e6ae
name: perl-Alien-wxWidgets
arch: i386
version: 0.31
epoch: 0
release: 1.fc7
summary: Building, finding and using wxWidgets binaries
url: http://search.cpan.org/dist/Alien-wxWidgets/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: perl-Alien-wxWidgets-0.31-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-Alien-wxWidgets-0.31-1.fc7.i386.rpm
checksum_type: sha
description:
  "Alien::wxWidgets" can be used to detect and get configuration
  settings from an installed wxWidgets.


pkgId: 40b60d4701bfebbe8f87b6319780c36110f43d79
name: rb_libtorrent-devel
arch: i386
version: 0.11
epoch: 0
release: 5.fc7
summary: Development files for rb_libtorrent
url: http://www.rasterbar.com/products/libtorrent/
rpm_license: BSD, zlib/libpng License, Boost Software License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: rb_libtorrent-0.11-5.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rb_libtorrent-devel-0.11-5.fc7.i386.rpm
checksum_type: sha
description:
  The rb_libtorrent-devel package contains libraries and header files for
  developing applications that use rb_libtorrent.

  The various source and header files included in this package are licensed
  under the revised BSD, zlib/libpng, and Boost Public licenses. See the various
  COPYING files in the included documentation for the full text of these
  licenses, as well as the comments blocks in the source code for which license
  a given source or header file is released under.


pkgId: f04492e3e797e7e2c3faa93d4f0a826ab682abaa
name: istanbul
arch: i386
version: 0.2.2
epoch: 0
release: 2.fc7
summary: Desktop Session Recorder
url: http://live.gnome.org/Istanbul
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Multimedia
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: istanbul-0.2.2-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/istanbul-0.2.2-2.fc7.i386.rpm
checksum_type: sha
description:
  Istanbul is a desktop session recorder.  You can use it to record your
  desktop session and then play it back for demos, tutorials and
  presentations.  Sessions are recorded to ogg theora files for later
  playback.


pkgId: 83815e72b1ff1d51d1d13aafc9582296ec35b1a8
name: tomcat5
arch: i386
version: 5.5.23
epoch: 0
release: 9jpp.2.fc7
summary: Apache Servlet/JSP Engine, RI for Servlet 2.4/JSP 2.0 API
url: http://tomcat.apache.org
rpm_license: Apache Software License
rpm_vendor: Koji
rpm_group: Networking/Daemons
rpm_buildhost: xenbuilder3.fedora.phx.redhat.com
rpm_sourcerpm: tomcat5-5.5.23-9jpp.2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/tomcat5-5.5.23-9jpp.2.fc7.i386.rpm
checksum_type: sha
description:
  Tomcat is the servlet container that is used in the official Reference
  Implementation for the Java Servlet and JavaServer Pages technologies.
  The Java Servlet and JavaServer Pages specifications are developed by
  Sun under the Java Community Process.

  Tomcat is developed in an open and participatory environment and
  released under the Apache Software License. Tomcat is intended to be
  a collaboration of the best-of-breed developers from around the world.
  We invite you to participate in this open development project. To
  learn more about getting involved, click here.


pkgId: e76a369af3aec6aa779404916c21df935825be3f
name: comix
arch: noarch
version: 3.6.3
epoch: 0
release: 1.fc7
summary: A user-friendly, customizable image viewer
url: http://comix.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Graphics
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: comix-3.6.3-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/comix-3.6.3-1.fc7.noarch.rpm
checksum_type: sha
description:
  Comix is a user-friendly, customizable image viewer.
  It is specifically designed to handle comic books, but
  also serves as a generic viewer. It reads images in ZIP,
  RAR or tar archives (also gzip or bzip2 compressed) as
  well as plain image files. It is written in Python and
  uses GTK+ through the PyGTK bindings.


pkgId: 12c14e670635d2b8b89ce53b5c9cd25f129881cc
name: mcs
arch: i386
version: 0.4.1
epoch: 0
release: 3.fc7
summary: A configuration file abstraction library
url: http://sacredspiral.co.uk/~nenolod/mcs/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: mcs-0.4.1-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mcs-0.4.1-3.fc7.i386.rpm
checksum_type: sha
description:
  mcs is a library and set of userland tools which abstract the storage of
  configuration settings away from userland applications.

  It is hoped that by using mcs, that the applications which use it will
  generally have a more congruent feeling in regards to settings.

  There have been other projects like this before (such as GConf), but unlike
  those projects, mcs strictly handles abstraction. It does not impose any
  specific data storage requirement, nor is it tied to any desktop environment or
  software suite.


pkgId: fd10ef030fdd79d50cb72517c4c5c77fe873123d
name: compat-flex
arch: i386
version: 2.5.4a
epoch: 0
release: 1.fc7
summary: Legacy version of flex, a tool for creating scanners
url: http://www.gnu.org/software/flex/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: compat-flex-2.5.4a-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/compat-flex-2.5.4a-1.fc7.i386.rpm
checksum_type: sha
description:
  This is legacy version of flex, a program that generates scanners.
  Scanners are programs which can recognize lexical patterns in text.
  Flex takes pairs of regular expressions and C code as input and
  generates a C source file as output.  The output file is compiled and
  linked with a library to produce an executable.  The executable
  searches through its input for occurrences of the regular expressions.
  When a match is found, it executes the corresponding C code.  Flex was
  designed to work with both Yacc and Bison, and is used by many
  programs as part of their build process.

  You should install flex if you are going to use your system for
  application development.


pkgId: bd524088a25115889cebe3e0761f3b1f2c4c94ae
name: perl-GraphViz
arch: noarch
version: 2.02
epoch: 0
release: 2.fc7
summary: Interface to the GraphViz graphing tool
url: http://search.cpan.org/dist/GraphViz/
rpm_license: GPL or Artistic
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-GraphViz-2.02-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-GraphViz-2.02-2.fc7.noarch.rpm
checksum_type: sha
description:
  This module provides an interface to layout and image generation of
  directed and undirected graphs in a variety of formats (PostScript, PNG,
  etc.) using the "dot", "neato", "twopi", "circo" and "fdp" programs from
  the GraphViz project (http://www.graphviz.org/ or
  http://www.research.att.com/sw/tools/graphviz/).


pkgId: 3fa6e7d57a017d41dcd3dc19f74d8d3c974f1b85
name: torque-pam
arch: i386
version: 2.1.8
epoch: 0
release: 1.fc7
summary: PAM module for TORQUE MOM nodes
url: http://www.clusterresources.com/products/torque/
rpm_license: Freely redistributable (See PBS_License.txt)
rpm_vendor: Fedora Project
rpm_group: System Environment/Base
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: torque-2.1.8-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/torque-pam-2.1.8-1.fc7.i386.rpm
checksum_type: sha
description:
  TORQUE (Tera-scale Open-source Resource and QUEue manager) is a resource
  manager providing control over batch jobs and distributed compute nodes.
  TORQUE is based on OpenPBS version 2.3.12 and incorporates scalability,
  fault tolerance, and feature extension patches provided by USC, NCSA, OSC,
  the U.S. Dept of Energy, Sandia, PNNL, U of Buffalo, TeraGrid, and many
  other leading edge HPC organizations.

  This build was configured with:
    --with-default-server=localhost
    --with-tcl --with-tk
    --enable-gui
    --with-rcp=/usr/bin/scp
  A simple PAM module to authorize users on PBS MOM nodes with a running job.


pkgId: f706458f27762d7abbe28ee7d0186ccff05e8e10
name: mod_annodex
arch: i386
version: 0.2.2
epoch: 0
release: 6.fc6
summary: Apache module for server-side support of annodex media
url: http://www.annodex.net/
rpm_license: Apache Software License
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer3.fedora.redhat.com
rpm_sourcerpm: mod_annodex-0.2.2-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mod_annodex-0.2.2-6.fc6.i386.rpm
checksum_type: sha
description:
  mod_annodex provides full support for Annodex.net media. For more details
  about annodex format, see http://www.annodex.net/

  mod_annodex is a handler for type application/x-annodex. It provides the
  following features:

          * dynamic generation of Annodex media from CMML files.

          * handling of timed query offsets, such as

            http://media.example.com/fish.anx?t=npt:01:20.8
          or
            http://media.example.com/fish.anx?id=Preparation

          * dynamic retrieval of CMML summaries, if the Accept: header
            prefers type text/x-cmml over application/x-annodex.


pkgId: e09d0c951f5c741d061e5ee94f5ef9237edd66f3
name: tinyfugue
arch: i386
version: 5.0
epoch: 0
release: 0.6.b8.fc7
summary: A MU* client
url: http://tinyfugue.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: tinyfugue-5.0-0.6.b8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/tinyfugue-5.0-0.6.b8.fc7.i386.rpm
checksum_type: sha
description:
  TinyFugue is the ubiquitous MUD/MOO/MUSH/MUCK/etc client for UNIX. This client
  allows you to interact with multiple worlds simultaneously, create command
  macros, and create hooks and triggers for automated responses to game messages.


pkgId: b55b5d14da43622534d5ed04e12ed2eb967f5fa5
name: perl-POE-Component-SimpleLog
arch: noarch
version: 1.04
epoch: 0
release: 1.fc6
summary: A simple logging system for POE
url: http://search.cpan.org/dist/POE-Component-SimpleLog
rpm_license: Artistic or GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: perl-POE-Component-SimpleLog-1.04-1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/perl-POE-Component-SimpleLog-1.04-1.fc6.noarch.rpm
checksum_type: sha
description:
  This module is a vastly simplified logging system that can do nice stuff.
  Think of this module as a dispatcher for various logs.

  This module *DOES NOT* do anything significant with logs, it simply routes
  them to the appropriate place ( Events )

  You register a log that you are interested in, by telling SimpleLog the target
  session and target event. Once that is done, any log messages your program
  generates ( sent to SimpleLog of course ) will be massaged, then sent to the
  target session / target event for processing.

  This enables an interesting logging system that can be changed during runtime
  and allow pluggable interpretation of messages.


pkgId: 87803d001e7eac4e71788c48f2a61ca32b822543
name: pinball
arch: i386
version: 0.3.1
epoch: 0
release: 7.fc7
summary: Emilia Pinball game
url: http://pinball.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: pinball-0.3.1-7.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pinball-0.3.1-7.fc7.i386.rpm
checksum_type: sha
description:
  The Emilia Pinball project is an open source pinball simulator for linux
  and other unix systems. The current release is a stable and mature alpha.
  There is only one level to play with but it is however very addictive.


pkgId: b7f3e1eed18e5f7abc64c905e31bc6d6fb315dd1
name: pybliographer
arch: noarch
version: 1.2.10
epoch: 0
release: 1.fc7
summary: Framework for working with bibliographic databases
url: http://www.pybliographer.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Publishing
rpm_buildhost: ppc2.fedora.redhat.com
rpm_sourcerpm: pybliographer-1.2.10-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pybliographer-1.2.10-1.fc7.noarch.rpm
checksum_type: sha
description:
  Pybliographer is a tool for managing bibliographic databases. It can be
  used for searching, editing, reformatting, etc. In fact, it's a simple
  framework that provides easy to use python classes and functions, and
  therefore can be extended to many uses (generating HTML pages according
  to bibliographic searches, etc).
  In addition to the scripting environment, a graphical Gnome interface
  is available. It provides powerful editing capabilities, a nice
  hierarchical search mechanism, direct insertion of references into LyX,
  direct queries on Medline, and more. It currently supports the following
  file formats: BibTeX, ISI, Medline, Ovid, Refer.


pkgId: 63f9d38d53be6282b077b3b51126433743cd6bf8
name: highlight
arch: i386
version: 2.4.8
epoch: 0
release: 2.fc7
summary: Universal source code to formatted text converter
url: http://www.andre-simon.de/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: highlight-2.4.8-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/highlight-2.4.8-2.fc7.i386.rpm
checksum_type: sha
description:
  A utility that converts sourcecode to HTML, XHTML, RTF, LaTeX, TeX,
  XSL-FO, XML or ANSI escape sequences with syntax highlighting.
  It supports several programming and markup languages.
  Language descriptions are configurable and support regular expressions.
  The utility offers indentation and reformatting capabilities.
  It is easily possible to create new language definitions and colour themes.


pkgId: 110a8c1afe84e83714848ec3511353338e010ad0
name: torsmo
arch: i386
version: 0.18
epoch: 0
release: 6.fc6
summary: TyopoytaORvelo System MOnitor
url: http://torsmo.sourceforge.net/
rpm_license: BSD
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: torsmo-0.18-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/torsmo-0.18-6.fc6.i386.rpm
checksum_type: sha
description:
  Torsmo (TyopoytaORvelo System MOnitor) is a system monitor that sits in the
  corner of your desktop. Torsmo can show various information about your system
  and its peripherals. Torsmo is very light and customizable, and it renders
  text on the root window.

  For a sample configuration take a look torsmorc.sample.


pkgId: 6cf0c388e8bb75d5a69751ac7031188fe8b9e618
name: portaudio
arch: i386
version: 18.1
epoch: 0
release: 8.fc6
summary: Free, cross platform, open-source, audio I/O library
url: http://www.portaudio.com/
rpm_license: BSD-like
rpm_vendor: Fedora Project
rpm_group: System Environment/Libraries
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: portaudio-18.1-8.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/portaudio-18.1-8.fc6.i386.rpm
checksum_type: sha
description:
  PortAudio is a portable audio I/O library designed for cross-platform
  support of audio. It uses a callback mechanism to request audio processing.
  Audio can be generated in various formats, including 32 bit floating point,
  and will be converted to the native format internally.


pkgId: 4d7b089a33d7f53908e619c144ec911b08ec2200
name: libgnome
arch: i386
version: 2.18.0
epoch: 0
release: 4.fc7
summary: GNOME base library
url: ftp://ftp.gnome.org
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: libgnome-2.18.0-4.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgnome-2.18.0-4.fc7.i386.rpm
checksum_type: sha
description:
  GNOME (GNU Network Object Model Environment) is a user-friendly set of
  GUI applications and desktop tools to be used in conjunction with a
  window manager for the X Window System. The libgnome package includes
  non-GUI-related libraries that are needed to run GNOME. The libgnomeui
  package contains X11-dependent GNOME library features.


pkgId: 0bd1ace1189ce6142ff7fda1ca181624dda8dbd6
name: php-mbstring
arch: i386
version: 5.2.2
epoch: 0
release: 3
summary: A module for PHP applications which need multi-byte string handling
url: http://www.php.net/
rpm_license: The PHP License v3.01
rpm_vendor: Koji
rpm_group: Development/Languages
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: php-5.2.2-3.src.rpm
rpm_packager: Koji
location_href: Fedora/php-mbstring-5.2.2-3.i386.rpm
checksum_type: sha
description:
  The php-mbstring package contains a dynamic shared object that will add
  support for multi-byte string handling to PHP.


pkgId: 37a2e46cc3db96c4db7ef131eb6ddb3471b3f5db
name: eclipse-mylar
arch: i386
version: 2.0
epoch: 0
release: 0.1.M2a.1.fc7
summary: Mylar is a task-focused UI for Eclipse
url: http://www.eclipse.org/mylar
rpm_license: Eclipse Public License
rpm_vendor: Fedora Project
rpm_group: Development/Tools
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: eclipse-mylar-2.0-0.1.M2a.1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/eclipse-mylar-2.0-0.1.M2a.1.fc7.i386.rpm
checksum_type: sha
description:
  Mylar integrates task support into Eclipse.  It supports offline editing
  for certain task repositories and monitors work activity to hide
  information that is not relevant to the current task.


pkgId: a8783f7f5592e4533f56b42f5200e878c80c83ed
name: obby
arch: i386
version: 0.4.4
epoch: 0
release: 1.fc7
summary: A library which provides synced document buffers
url: http://releases.0x539.de/obby
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: obby-0.4.4-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/obby-0.4.4-1.fc7.i386.rpm
checksum_type: sha
description:
  libobby is a library which provides synced document buffers. It supports
  multiple documents in one session and is portable to both Windows and
  Unix-like platforms.


pkgId: 95099a5ed8c626c594866a0855ef9e17f4b7aacd
name: pork
arch: i386
version: 0.99.8.1
epoch: 0
release: 6.fc6
summary: Console based AIM client that looks like ircII
url: http://dev.ojnk.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: pork-0.99.8.1-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/pork-0.99.8.1-6.fc6.i386.rpm
checksum_type: sha
description:
  pork is an ncurses-based AOL instant messenger client. It uses the
  OSCAR protocol (the one the windows client uses) to access AIM. Pork
  features Perl scripting; an online help system; the ability to
  configure nearly all aspects of the program's look-and-feel; an alias
  system; and a powerful, fully-configurable key binding system. It
  supports being logged in with more than one screen name at the same
  time. The default look-and-feel of the client is modeled after the
  ircII IRC client. Anyone comfortable using ircII (or any clients
  derived from it -- e.g., epic, BitchX, etc.) will feel comfortable using
  pork.


pkgId: 7bfb0bef19d5edc1543b483c4f6c7f71f2604355
name: php-pear-Net-FTP
arch: noarch
version: 1.3.2
epoch: 0
release: 1.fc7
summary: Provides an OO interface to the PHP FTP functions plus some additions
url: http://pear.php.net/package/Net_FTP
rpm_license: PHP License
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: php-pear-Net-FTP-1.3.2-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/php-pear-Net-FTP-1.3.2-1.fc7.noarch.rpm
checksum_type: sha
description:
  Net_FTP allows you to communicate with FTP servers in a more comfortable
  way than the native FTP functions of PHP do. The class implements everything
  nativly supported by PHP and additionally features like recursive up- and
  downloading, dircreation and chmodding. It although implements an observer
  pattern to allow for example the view of a progress bar.


pkgId: 2c4de8f8db5e114136589f56e3d84e9ecd9593d7
name: bind-devel
arch: i386
version: 9.4.0
epoch: 31
release: 6.fc7
summary: Header files and libraries needed for BIND DNS development.
url: http://www.isc.org/products/BIND/
rpm_license: BSD-like
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: bind-9.4.0-6.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/bind-devel-9.4.0-6.fc7.i386.rpm
checksum_type: sha
description:
  The bind-devel package contains all the header files and libraries
  required for development with ISC BIND 9 and BIND 8


pkgId: 286203b233cc8676edb349abdd78f9650071f5ec
name: php-Smarty
arch: noarch
version: 2.6.18
epoch: 0
release: 1.fc7
summary: Template/Presentation Framework for PHP
url: http://smarty.php.net
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: ppc3.fedora.redhat.com
rpm_sourcerpm: php-Smarty-2.6.18-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/php-Smarty-2.6.18-1.fc7.noarch.rpm
checksum_type: sha
description:
  Although Smarty is known as a "Template Engine", it would be more accurately
  described as a "Template/Presentation Framework." That is, it provides the
  programmer and template designer with a wealth of tools to automate tasks
  commonly dealt with at the presentation layer of an application. I stress the
  word Framework because Smarty is not a simple tag-replacing template engine.
  Although it can be used for such a simple purpose, its focus is on quick and
  painless development and deployment of your application, while maintaining
  high-performance, scalability, security and future growth.


pkgId: 4c05235784f87339db85f4e06454cb8dcca3f94b
name: ksshaskpass
arch: i386
version: 0.3
epoch: 0
release: 2.fc7
summary: A KDE version of ssh-askpass with KWallet support
url: http://www.kde-apps.org/content/show.php?content=50971
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ksshaskpass-0.3-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ksshaskpass-0.3-2.fc7.i386.rpm
checksum_type: sha
description:
  A KDE version of ssh-askpass with KWallet support.

  Please read /usr/share/doc/ksshaskpass-0.3/README.Fedora for usage
  instructions


pkgId: ae1075fddc6690d5a4adaf5856f302a675642437
name: alsamixergui
arch: i386
version: 0.9.0
epoch: 0
release: 0.3.rc1.fc6
summary: GUI mixer for ALSA sound devices
url: ftp://www.iua.upf.es/pub/mdeboer/projects/alsamixergui
rpm_license: BSD-ish
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: hammer2.fedora.phx.redhat.com
rpm_sourcerpm: alsamixergui-0.9.0-0.3.rc1.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/alsamixergui-0.9.0-0.3.rc1.fc6.i386.rpm
checksum_type: sha
description:
  alsamixergui is a FLTK based frontend for alsamixer. It is written
  directly on top of the alsamixer source, leaving the original source
  intact, only adding a couple of ifdefs, and some calls to the gui
  part, so it provides exactly the same functionality, but with a
  graphical userinterface.


pkgId: 488682fca59d672275574893de3ababf71c4eb06
name: lynx
arch: i386
version: 2.8.6
epoch: 0
release: 3.fc7
summary: A text-based Web browser
url: http://lynx.isc.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Internet
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: lynx-2.8.6-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/lynx-2.8.6-3.fc7.i386.rpm
checksum_type: sha
description:
  Lynx is a text-based Web browser. Lynx does not display any images,
  but it does support frames, tables, and most other HTML tags. One
  advantage Lynx has over graphical browsers is speed; Lynx starts and
  exits quickly and swiftly displays webpages.


pkgId: d9c7effb8227b90bb9a484e35f2bafd4d96f0fb2
name: neverball
arch: i386
version: 1.4.0
epoch: 0
release: 8.fc7
summary: Roll a ball through an obstacle course
url: http://icculus.org/neverball/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: neverball-1.4.0-8.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/neverball-1.4.0-8.fc7.i386.rpm
checksum_type: sha
description:
  Tilt the  floor to roll a  ball through an obstacle  course within the
  given time.  If the ball falls or time expires, a ball is lost.

  Collect 100 coins  to save your progress and earn  an extra ball.  Red
  coins are worth 5.  Blue coins are worth 10.


pkgId: d0008dd135531a29b8010381c52e5bc092ef336a
name: xorg-x11-server-Xorg
arch: i386
version: 1.3.0.0
epoch: 0
release: 5.fc7
summary: Xorg X server
url: http://www.x.org
rpm_license: MIT/X11
rpm_vendor: Koji
rpm_group: User Interface/X
rpm_buildhost: xenbuilder4.fedora.phx.redhat.com
rpm_sourcerpm: xorg-x11-server-1.3.0.0-5.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/xorg-x11-server-Xorg-1.3.0.0-5.fc7.i386.rpm
checksum_type: sha
description:
  X.org X11 is an open source implementation of the X Window System.  It
  provides the basic low level functionality which full fledged
  graphical user interfaces (GUIs) such as GNOME and KDE are designed
  upon.


pkgId: 73e63423321e43a557cf25465fb9ab9cb498c166
name: ocsinventory-ipdiscover
arch: i386
version: 1.01
epoch: 0
release: 2.fc7
summary: Open Computer and Software Inventory Next Generation client
url: http://ocsinventory.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: ocsinventory-ipdiscover-1.01-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/ocsinventory-ipdiscover-1.01-2.fc7.i386.rpm
checksum_type: sha
description:
  Open Computer and Software Inventory Next Generation is an application
  designed to help a network or system administrator keep track of computer
  configuration and software installed on the network.

  It also allows deploying softwares, commands or files on Windows and
  Linux client computers.

  ocsinventory-ipdiscover provide the ipdiscover command used by
  client agent for Linux.


pkgId: 613c784fb75d1b476098a0d24baf236411932982
name: fedora-usermgmt-shadow-utils
arch: noarch
version: 0.9
epoch: 0
release: 2.fc7
summary: shadow-utils customization for fedora-usermgmt
url: http://fedoraproject.org/wiki/PackageUserCreation
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/System
rpm_buildhost: ppc1.fedora.redhat.com
rpm_sourcerpm: fedora-usermgmt-0.9-2.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/fedora-usermgmt-shadow-utils-0.9-2.fc7.noarch.rpm
checksum_type: sha
description:
  This package provides the customization of fedora-usermgmt for the
  traditional shadow-utils.

  WARNING: The attribute "predictable" from "predicatable user-creation"
  is turned off by default. It can be enabled by executing

    /usr/sbin/update-alternatives --set fedora-usermgmt /etc/fedora/usermgmt/scripts.shadow-utils

  as root.


pkgId: b88eba517e2b9b0984c4ce4a38cf35db6dadf2cb
name: kdeutils-devel
arch: i386
version: 3.5.6
epoch: 6
release: 3.fc7
summary: Development files for kdeutils
url: http://www.kde.org
rpm_license: GPL
rpm_vendor: Koji
rpm_group: Development/Libraries
rpm_buildhost: xenbuilder1.fedora.redhat.com
rpm_sourcerpm: kdeutils-3.5.6-3.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/kdeutils-devel-3.5.6-3.fc7.i386.rpm
checksum_type: sha
description:
  Development files for kdeutils. Install kdeutils-devel if you wish
  to develop or compile KDE utils applications.


pkgId: 160f936bc211f6d3dabf640c9d0a2838205b18be
name: mod_security
arch: i386
version: 2.1.0
epoch: 0
release: 3.fc7
summary: Security module for the Apache HTTP Server
url: http://www.modsecurity.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: System Environment/Daemons
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: mod_security-2.1.0-3.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mod_security-2.1.0-3.fc7.i386.rpm
checksum_type: sha
description:
  ModSecurity is an open source intrusion detection and prevention engine
  for web applications. It operates embedded into the web server, acting
  as a powerful umbrella - shielding web applications from attacks.


pkgId: a006d0f34364f1caa231e7f1f52ab7a5ea10481e
name: vim-X11
arch: i386
version: 7.0.235
epoch: 2
release: 1.fc7
summary: The VIM version of the vi editor for the X Window System
url: http://www.vim.org/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Editors
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: vim-7.0.235-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/vim-X11-7.0.235-1.fc7.i386.rpm
checksum_type: sha
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and
  more. VIM-X11 is a version of the VIM editor which will run within the
  X Window System.  If you install this package, you can run VIM as an X
  application with a full GUI interface and mouse support.

  Install the vim-X11 package if you'd like to try out a version of vi
  with graphics and mouse capabilities.  You'll also need to install the
  vim-common package.


pkgId: 252279e429e378d54c9c0804fef8fef93ecef9b6
name: rusers-server
arch: i386
version: 0.17
epoch: 0
release: 47
summary: Server for the rusers protocol.
rpm_license: BSD
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: rusers-0.17-47.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/rusers-server-0.17-47.i386.rpm
checksum_type: sha
description:
  The rusers program allows users to find out who is logged into various
  machines on the local network.  The rusers command produces output
  similar to who, but for the specified list of hosts or for all
  machines on the local network. The rusers-server package contains the
  server for responding to rusers requests.

  Install rusers-server if you want remote users to be able to see
  who is logged into your machine.


pkgId: d8f1b1caebc1a986846dbc0a229776d8051621c2
name: samba
arch: i386
version: 3.0.25
epoch: 0
release: 2.fc7
summary: The Samba Suite of programs
url: http://www.samba.org/
rpm_license: GPL
rpm_vendor: Koji
rpm_group: System Environment/Daemons
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: samba-3.0.25-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/samba-3.0.25-2.fc7.i386.rpm
checksum_type: sha
description:
  Samba is the suite of programs by which a lot of PC-related machines
  share files, printers, and other information (such as lists of
  available files and printers). The Windows NT, OS/2, and Linux
  operating systems support this natively, and add-on packages can
  enable the same thing for DOS, Windows, VMS, UNIX of all kinds, MVS,
  and more. This package provides an SMB/CIFS server that can be used to
  provide network services to SMB/CIFS clients.
  Samba uses NetBIOS over TCP/IP (NetBT) protocols and does NOT
  need the NetBEUI (Microsoft Raw NetBIOS frame) protocol.


pkgId: a244a8ba784dd6a1ed1870e8d28ed682561b738e
name: xpilot-ng-server
arch: i386
version: 4.7.2
epoch: 0
release: 12.fc7
summary: Server for hosting xpilot games
url: http://xpilot.sourceforge.net
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Amusements/Games
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: xpilot-ng-4.7.2-12.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/xpilot-ng-server-4.7.2-12.fc7.i386.rpm
checksum_type: sha
description:
  The xpilot server.  This allows you to host xpilot games on your
  computer and develop new xpilot maps.  This is required if you
  are playing alone, but not required if you are joining one of the
  public xpilot games hosted on the internet.


pkgId: 0913871c7f9b7cd7c27ff84d861b3188bea0b368
name: mono-core
arch: i386
version: 1.2.3
epoch: 0
release: 3.fc7
summary: The Mono CIL runtime, suitable for running .NET code
url: http://www.mono-project.com/
rpm_license: GPL, LGPL, MIT X11
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Languages
rpm_buildhost: hs20-bc2-3.build.redhat.com
rpm_sourcerpm: mono-1.2.3-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/mono-core-1.2.3-3.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the core of the Mono runtime including its
  Virtual Machine, Just-in-time compiler, C# compiler, security
  tools and libraries (corlib, XML, System.Security, ZipLib,
  I18N, Cairo and Mono.*).


pkgId: 5ef3acc75b640331d2cf1b593929742e5df175e3
name: krecipes
arch: i386
version: 0.9.1
epoch: 0
release: 5.fc6
summary: Application to manage recipes and shopping-lists
url: http://krecipes.sourceforge.net/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Productivity
rpm_buildhost: hammer3.fedora.phx.redhat.com
rpm_sourcerpm: krecipes-0.9.1-5.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/krecipes-0.9.1-5.fc6.i386.rpm
checksum_type: sha
description:
  Krecipes is a program that lets you to manage your recipes, create
  shopping lists, choose a recipe based on available ingredients and plan
  your menu/diet in advance.


pkgId: 9a3541f77299494f562d66ab0e6c21c02244343f
name: scons
arch: noarch
version: 0.97
epoch: 0
release: 2.fc7
summary: An Open Source software construction tool
url: http://www.scons.org
rpm_license: MIT
rpm_vendor: Koji
rpm_group: Development/Tools
rpm_buildhost: xenbuilder2.fedora.redhat.com
rpm_sourcerpm: scons-0.97-2.fc7.src.rpm
rpm_packager: Koji
location_href: Fedora/scons-0.97-2.fc7.noarch.rpm
checksum_type: sha
description:
  SCons is an Open Source software construction tool--that is, a build
  tool; an improved substitute for the classic Make utility; a better way
  to build software.  SCons is based on the design which won the Software
  Carpentry build tool design competition in August 2000.

  SCons "configuration files" are Python scripts, eliminating the need
  to learn a new build tool syntax.  SCons maintains a global view of
  all dependencies in a tree, and can scan source (or other) files for
  implicit dependencies, such as files specified on #include lines.  SCons
  uses MD5 signatures to rebuild only when the contents of a file have
  really changed, not just when the timestamp has been touched.  SCons
  supports side-by-side variant builds, and is easily extended with user-
  defined Builder and/or Scanner objects.


pkgId: 2e0eeb694dcccddf1702fda3cdc8d8cf7844adf9
name: qhull-devel
arch: i386
version: 2003.1
epoch: 0
release: 6.fc6
summary: Development files for qhull
url: http://www.qhull.org
rpm_license: Distributable
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer1.fedora.phx.redhat.com
rpm_sourcerpm: qhull-2003.1-6.fc6.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/qhull-devel-2003.1-6.fc6.i386.rpm
checksum_type: sha
description:
  Qhull is a general dimension convex hull program that reads a set
  of points from stdin, and outputs the smallest convex set that contains
  the points to stdout.  It also generates Delaunay triangulations, Voronoi
  diagrams, furthest-site Voronoi diagrams, and halfspace intersections
  about a point.


pkgId: f68d189be9213ca5c86c9f539868207b899f0ee4
name: licq-osd
arch: i386
version: 1.3.4
epoch: 0
release: 6.fc7
summary: OSD (On Screen Display) plugin for Licq
url: http://www.licq.org/
rpm_license: GPL
rpm_vendor: Fedora Project
rpm_group: Applications/Internet
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: licq-1.3.4-6.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/licq-osd-1.3.4-6.fc7.i386.rpm
checksum_type: sha
description:
  This is a small plugin, which uses libxosd2 to
  display new arriving messages as OSD (On Screen Display)
  text on your desktop.


pkgId: 7755732bae25ad74db8e3830a6d1a3d62c20adae
name: binutils-devel
arch: i386
version: 2.17.50.0.12
epoch: 0
release: 4
summary: BFD and opcodes static libraries and header files
url: http://sources.redhat.com/binutils
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: System Environment/Libraries
rpm_buildhost: ls20-bc1-14.build.redhat.com
rpm_sourcerpm: binutils-2.17.50.0.12-4.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/binutils-devel-2.17.50.0.12-4.i386.rpm
checksum_type: sha
description:
  This package contains BFD and opcodes static libraries and associated
  header files.  Only *.a libraries are included, because BFD doesn't
  have a stable ABI.  Developers starting new projects are strongly encouraged
  to consider using libelf instead of BFD.


pkgId: 1b148b6fb10767fec43fa2e96639411590a4d0cc
name: gnome-vfsmm26-devel
arch: i386
version: 2.18.0
epoch: 0
release: 1.fc7
summary: Headers for developing programs that will use gnome-vfsmm26
url: http://gtkmm.sourceforge.net/
rpm_license: LGPL
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: hammer2.fedora.redhat.com
rpm_sourcerpm: gnome-vfsmm26-2.18.0-1.fc7.src.rpm
rpm_packager: Fedora Project <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/gnome-vfsmm26-devel-2.18.0-1.fc7.i386.rpm
checksum_type: sha
description:
  This package contains the static libraries and header files needed for
  developing applications with gnome-vfsmm26.


pkgId: 36dff767e54d83ee724ef99951f37f9fb92650ab
name: libgpod-devel
arch: i386
version: 0.4.2
epoch: 0
release: 1.fc7
summary: Development files for the libgpod library
url: http://www.gtkpod.org/libgpod.html
rpm_license: LGPL
rpm_vendor: Red Hat, Inc.
rpm_group: Development/Libraries
rpm_buildhost: hs20-bc2-2.build.redhat.com
rpm_sourcerpm: libgpod-0.4.2-1.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/libgpod-devel-0.4.2-1.fc7.i386.rpm
checksum_type: sha
description:
  Libgpod is a library to access the contents of an iPod. It supports playlists,
  smart playlists, playcounts, ratings, podcasts, album artwork, photos, etc.

  This package contains the files required to develop programs that will use
  libgpod.


pkgId: 299dcdafd7cac2a394473bc1b69b82254583a262
name: dvd+rw-tools
arch: i386
version: 7.0
epoch: 0
release: 3.fc7
summary: Toolchain to master DVD+RW/+R media
url: http://fy.chalmers.se/~appro/linux/DVD+RW/
rpm_license: GPL
rpm_vendor: Red Hat, Inc.
rpm_group: Applications/Multimedia
rpm_buildhost: hs20-bc1-6.build.redhat.com
rpm_sourcerpm: dvd+rw-tools-7.0-3.fc7.src.rpm
rpm_packager: Red Hat, Inc. <http://bugzilla.redhat.com/bugzilla>
location_href: Fedora/dvd+rw-tools-7.0-3.fc7.i386.rpm
checksum_type: sha
description:
  Collection of tools to master DVD+RW/+R media. For further
  information see http://fy.chalmers.se/~appro/linux/DVD+RW/.


