# changelog

author: Jeremy Katz <katzj@redhat.com> - 10.2.0.60-1
changelog:
  - Better handling of the langsupport group (clumens)
  - Don't install the gfs stuff for all kernel variants, that brings in 
    kernel-smp on an everything install (#156849)
  - Don't grow a partition beyond the largest freespace on a drive
  - HFS+ support
  - Pull in more selinux policy files to try to get /home labeled right
  - Fix typo causing segfault (pnasrat)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.59-1
changelog:
  - Try to use the fb res on pmac
  - Always reset terminal attrs on ppc (notting, #156411)
  - Remove bogus preexisting LVM info when doing kickstart 
    installs (clumens, #156283)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.58-1
changelog:
  - Beep on CD insertion, not after
  - Fix language support selection (clumens)
  - Fix nfsiso (clumens)
  - Misc X config fixes for ppc.  Boot with "usefbx" to use fbdev 
    instead again (#149188)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.57-1
changelog:
  - Fix bind mounts (clumens, #151458)
  - Fix hard drive installs (clumens)
  - Re-add bluecurve icons
  - Attempt to fix Chinese


author: Peter Jones <pjones@redhat.com> - 10.2.0.56-1
changelog:
  - Fix mediacheck calls from cdinstall.c, and make mediacheck.c include
    its own header so typechecking works.


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.55-1
changelog:
  - Don't spam about package downloads in cmdline mode (#155250)
  - Apply jnovy's patch to fix space calculations for > 2 TB devices (#155709)
  - Set default font for CJK better (clumens, #156052)
  - Add --label for part in kickstart (clumens, #79832)
  - Ensure decimal IP addrs (#156088)
  - Apply patch from Joe Pruett for rpmarch= fixes (#101971)
  - Don't set SUPPORTED unnecessarily (#115847)
  - Give more room for cyl #s (#119767)
  - Bump size of diskboot.img
  - Add back button for required media message (#114770)
  - Fix lvs showing up with a mountpoint of 0 (#153965)
  - Nuke some debug code
  - Don't try to unmount (tmpfs) /dev
  - Write a minimal mtab to avoid fsck/mount complaints (pjones)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.54-1
changelog:
  - Only select kernel-smp that matches the arch of kernel (#149618)
  - Apply the read of Dustin Kirkland's checkpoint fragment sum patch
  - Fix order of retry/reboot (#155884)
  - Probe macio (pnasrat, #154846)


author: Chris Lumens <clumens@redhat.com> 10.2.0.53-1
changelog:
  - Beep at CD prompt and on install completion (katzj, #109264, #116681).
  - Add kernel-smp-devel and kernel-hugemem-devel to exclude list (katzj).
  - Fix buffer overflow when CD/DVD images are several directories deep
    (#154715).
  - Fix media check (pjones).
  - Set language on CD and no pass installs (#149688).
  - Fix disappearing button bar (#151837).
  - Upgrade PReP on iSeries (pnasrat).


author: Chris Lumens <clumens@redhat.com> 10.2.0.52-1
changelog:
  - Allow mediacheck in kickstart (katzj, #116429)
  - Check for a drive being selected in autopart (katzj, #124296)
  - Fix traceback in language selection screen (#155103)
  - Mark "Downloading" for translation (katzj, #155214)
  - Applied Dustin Kirkland's checkpoint fragment sum patch for mediacheck.
  - Make anaconda-ks.cfg ro (pnasrat)
  - Ensure there are <= 27 RAID members (katzj, #155509)
  - Fix fsoptions for preexisting partitions in kickstart (#97560).


author: Chris Lumens <clumens@redhat.com> 10.2.0.51-1
changelog:
  - Decode source URL for writing to anaconda-ks.cfg (#154149).
  - Add kernel-xen?-devel to the exclude list (katzj, #154819).
  - Fix text wrapping (#153071, #154786).
  - Various UI fixes.
  - Select language packages for all selected languages (#153748, #154181).


author: Peter Jones <pjones@redhat.com> - 10.2.0.49-1
changelog:
  - Cut summaries off to avoid layout problems (katzj, #154459)
  - Add script to update loader in initrd (katzj)
  - Typo fixes in upgrade.py (katzj, #154522)
  - Fix rescue mode network enabling (katz, #153961)
  - Add libaudit to the graphical stage2 file list, for Xorg
  - Various language fixes (clumens, #152404)


author: Peter Jones <pjones@redhat.com> - 10.2.0.48-1
changelog:
  - Typo fixes in gui.py (menthos, #154324)
  - Don't try to do early swap in test mode, and use yesno not okcancel (msw)
  - If the install language is an unknown locale, use en_US.UTF_8
  - Fix upgrade to make devices available in the changeroot


author: Peter Jones <pjones@redhat.com> - 10.2.0.46-1
changelog:
  - put readline in the net images
  - fix linxuthreads warnings in upd-instroot
  - (clumens) fix build-locale-archive


author: Chris Lumens <clumens@redhat.com> - 10.2.0.41-1
changelog:
  - Make sure $LANG is set right for the second stage.
  - Fix kickstart traceback trying to skip a nonexistant step.
  - Import encodings.idna (sopwith, #153754).
  - Fix image building problems.
  - Fix kickstart traceback when using shortened forms of language names
    (#153656).


author: Chris Lumens <clumens@redhat.com> - 10.2.0.38-1
changelog:
  - Set default language for /etc/sysconfig/i18n (#149688).
  - Make sure hostname option isn't greyed out if using static IP (#149116).
  - Remove unused packages, python library bits, and locale info (katzj).
  - Add missing Indic font packages (katzj).
  - Various language fixups.


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.37-1
changelog:
  - try not using maxcpus=1 for arches which still had it
  - don't use the reserved variable name str (sopwith)
  - various language fixups (clumens)


author: Chris Lumens <clumens@redhat.com> - 10.2.0.34-1
changelog:
  - Adjust pcmcia module loading for new in-kernel ds (pjones, #151235)
  - Make the rescue images identify which arch they're for (pjones, #151501)
  - Delete LV snapshots before the parent LV (pjones, #151524)
  - Check various forms of a language nick.
  - Allow setting MTU on the command line (katzj, #151789)
  - Remove dead code in config file handling and sparc booting (katzj)
  - Product name and path simplification (katzj)
  - Fixes for lang-table format change (katzj, clumens)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.32-1
changelog:
  - Switch theme to clearlooks
  - Add new Solaris partition id
  - Mark some more strings for translation
  - Fix xfs fs creation (Lars Hamann, #151378)


author: Chris Lumens <clumens@redhat.com> - 10.2.0.31-1
changelog:
  - Add libgcc for images.
  - Rewrite language handling.
  - Fix readImageFromFile deprecation warning (katzj).
  - Don't hide groups which just have metapkgs (katzj, #149182).
  - Load SELinux booleans (katzj, #151896).


author: Chris Lumens <clumens@redhat.com> - 10.2.0.30-1
changelog:
  - Try harder on the libstdc++ include.
  - Fix /etc/resolv.conf fir interactive kickstart installs (#151472).


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.29-1
changelog:
  - Fix beta nag translation
  - Fix button growing (clumens, #151208)
  - Add libstdc++ for images (clumens)
  - Clean up congrats screen (clumens, #149526)
  - Fix CD ejecting in loader (pnasrat, #151232)
  - Exclude Xen kernels from everything install (#151490)
  - Add reserve_size for ppc to leave room on disc1 (#151234)
  - Add some more locales


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.28-1
changelog:
  - fix swap detection on upgrade (pjones)
  - don't use os.read to make a buffer of '\x00' (pjones)
  - move availRaidLevels to raid.py from fsset.py (pjones)
  - fix Xvnc parameters (clumens, #150498)
  - unmount loopback-mounted ISO images to free loop0 (clumens, #150887)
  - fix warnings about gtk.TRUE and gtk.FALSE, partly based on a patch
    from Colin Charles. (pjones)
  - sqlite3->sqlite (pnasrat)
  - support longer package names in hdlist (pnasrat, #146820)
  - Fix handling of --debug (Ingo Pakleppa, #150920, #150925)
  - Fix for font location changes (#150889)
  - More cjk text shuffling (#149039)


author: Peter Jones <pjones@redhat.com> - 10.2.0.27-1
changelog:
  - supress lvm fd warning messages
  - fewer log messages when growing partitions
  - clamp LVs to pesize during grow


author: Peter Jones <pjones@redhat.com> - 10.2.0.25-1
changelog:
  - Empty blacklist in upgrade.py (notting, #142893)
  - Add new font package names (katzj)
  - Yet another fix of autopart with lvm (pjones)


author: Chris Lumens <clumens@redhat.com> - 10.2.0.23-1
changelog:
  - Don't write out filesystems to fstab we haven't mounted (katzj, #149091).
  - Deal with multiple Apple Bootstrap partitions (pnasrat).
  - Set hostname sensitivity UI bug.
  - Eject CD when failing (pnasrat, #147272).
  - Better handling of Apple Bootstrap throughout (pjones).
  - Do ethtool setup everywhere (pnasrat, #145522).
  - Fix "debug" command line arg (pjones).
  - Import new libkrb5support library (#149856).
  - Add -once to ensure Xvnc exits (katzj, #137337).


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.22-1
changelog:
  - revert some of the ppc changes so that lvm is used (nasrat)
  - Try to fix bogl stuff some more (#149039)
  - x86_64 install fixes (#149040)


author: Paul Nasrat <pnasrat@redhat.com> - 10.2.0.20-1
changelog:
  - Pull in translations
  - s390 linuxrc silence nonexistant group warnings (karsten)
  - ppc mac autopartitioning and G5 boot.iso (#121266) and (#149081)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.19-1
changelog:
  - fix x86_64 installs for bad urlgrabber import
  - Fix traceback with no %post (clumens)
  - Put hostname in the text entry (clumens, #132826)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.18-1
changelog:
  - Remove some old cruft
  - Fix-up for new module naming in gnome-python2-canvas 2.9.x 
  - Add needed requirements for rpm 4.4
  - Fix segfault when rpm tries to write to non-existent fd during 
    transaction ordering
  - Support --erroronfail as an option for %pre/%post (clumens, #124386)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.17-1
changelog:
  - Use rhpl.archscore to fix iseries upgrades (pnasrat, #146915)
  - Only configure ksdevice if no --device (pnasrat, #138852)
  - Don't redraw help if disasbled on next button click (clumens, #145691)
  - Fix exception in exception handler (msw)
  - Rebuild for new librpm


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.15-1
changelog:
  - Fix some bugs in the reduce-font changes
  - Fix urlgrabber import
  - Remove langsupport screen, base additional language support off of groups 
    selected


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.14-1
changelog:
  - Fix deprecation warnings for pygtk 2.5 (clumens)
  - Fix bootloader --location=none (clumens, #146448)
  - Use urlgrabber (clumens)
  - Create reduced bogl font at upd-instroot time to include more 
    characters (#92146, #140208)
  - Allow passing --src-discs=0 to get no srpm discs from splittree 
    (based on patch from Armijn Hemel, #119070)
  - Mount pseudo-fs's with a more descriptive device name (#136820)
  - Minor tweaks to completion message (#138688)


author: Chris Lumens <clumens@redhat.com> - 10.2.0.12-1
changelog:
  - Fix partitioning bugs (#101432, #137119)
  - Support --bytes-per-inode on a per-partition basis (#57550)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.11-1
changelog:
  - Fix some tracebacks with the new glade code
  - Use busybox ash instead of ash for netstg2.img/hdstg2.img
  - Initialize terminals to avoid color palette change from 
    bterm (pjones, #137849)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.10-1
changelog:
  - Handle /sbin/lvm not existing anymore
  - Allow installclasses to turn off showing the upgrade option
  - Ensure that Core exists in your comps file (#143930)
  - Don't fall back to text mode if we fail to start graphics in test mode
  - Display better error messages for HTTP/FTP errors (clumens, #144546)
  - Switch main UI to use glade, set up infrastructure for use of glade
  - Remove some old code
  - Add buildprereq for intltool (fixed for b.g.o 163981)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.9-1
changelog:
  - Fix some typos (#143257, #144006)
  - Fix from Matthew Miller for multiple dns servers (#84409)
  - Fix formatting of fcp disks (#144199)
  - Include a README for x86_64 images (clumens, #143366)
  - Make an x86_64 rescue image (clumens, #143366)
  - Add libXfixes for new gtk2


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.8-1
changelog:
  - Use tmpfs not ramfs for /dev
  - Blacklist "root" as a VG name (#142785)
  - Better error message if swap can't be mounted (clumens, #143000)
  - Some fixes to the new /dev handling in init
  - Make more certain hwaddr gets written out (#143535)
  - Handle new swap label format (#143447)
  - Let the user know they're in rescue mode earlier (clumens, #136171)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.7-1
changelog:
  - Better error handling on device creation (#142273)
  - Reset package selection to defaults if selected (#142415)
  - LVM on RAID1 fix (nasrat, #141781)
  - Add support for biosdev in driverdisk from Rez Kabir (#142738)
  - Some more SX8 fixes
  - Create /dev as a tmpfs (#141570)
  - Remove some old code
  - Improve quoting of fstype in anaconda-ks.cfg (Danen Brücker)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.6-1
changelog:
  - Write out wepkey better (#140645)
  - Try to skip source isos with nfsiso (#106017)
  - Don't traceback for bad/missing / in fstab (nasrat, #141174)
  - Include pesize in generated ks.cfg (#141370)
  - Loop less on shutdown
  - Better handling of partial volume groups (#139058)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.5-1
changelog:
  - CTCPROT fix (karsten, #133088)
  - Fix LVM partitions becoming negative sized (nasrat, #141268)
  - Fix removal/editing of zfcp devices in gui (#140559)
  - Fix segfault (#140541, #140876)
  - Fix handling of pre-existing parts on disks that we then ignore (#131333)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.4-1
changelog:
  - Update python version in urllib hack
  - /init in initramfs instead of /linuxrc
  - Improved ppc console detection (nasrat, #134397)
  - Better handling of going back when out of space (#133773)
  - Better handling of LVM failures (#134263)
  - Set a default when boot loader to upgrade is indeterminate (#139603)
  - No more diet on i386


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.3-1
changelog:
  - Create initramfs images instead of initrds for boot media
  - Remove some old code in a few places
  - Allow passing --notksdevice in network lines of a ks.cfg to avoid 
    confusion with multiple network lines and a ksdevice= (#136903)
  - Allow going back to change the network device if ksdevice= is 
    passed and isn't correct (#136903)
  - Fix for console= to automatically imply serial as needed (#137971)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.2-1
changelog:
  - Do some more unmounts if we run out of space (#133773)
  - Fix for obsoletes E being long (nasrat, #138485)
  - Make serial imply nofb (#134167)
  - Set fstype to vfat if user selected /boot/efi in the 
    mountpoint dropdown (#138580)
  - Copy the X log to the installed system
  - Add fix from HJ Lu to fix hang with no bootloader install (#138932)
  - Fix splittree error msg (nasrat, #139391)
  - Ignore IBM *STMF disks (#137920)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.1-1
changelog:
  - whrandom is deprecated in python 2.4, use random instead
  - fix some syntax errors
  - fallback to English for languages that can't do text-mode (#138308)
  - More CTCPROT/PORTNAME tweaks (karsten)


author: Jeremy Katz <katzj@redhat.com> - 10.2.0.0-1
changelog:
  - Switch to python 2.4
  - Clean up warning on network screen from pygtk
  - Parse pxelinux IPAPPEND for loader network info, patch 
    from Bastien Nocera (#134054)
  - Clean up handling of binaries busybox should override
  - Do misc package selection earlier so we know all the CDs needed 
    when confirming the install (#122017)
  - Mark some strings for translation (#137197)
  - Don't reference boot disks in boot loader screen (#135851)
  - Add hardware address information to network screen (#131814)
  - Fix exception handling in label reading


author: Jeremy Katz <katzj@redhat.com> - 10.1.1.4-1
changelog:
  - Fix traceback with CJK upgrades (#137345)
  - Allow 128 bit WEP keys (#137447)
  - Fix race condition with X client startup (krh, #108777)
  - Fix segfault in hd kickstart install (twaugh, #137533)
  - Better handling of errors reading labels (#137846)
  - Try harder to find LCS interface names (karsten)
  - Improve CTCPROT handling (karsten)
  - Fix traceback going back in rescue mode network config (#137844)
  - Don't use busybox shutdown, poweroff, reboot (#137948)
  - Set permissions on anaconda logs
  - Make autopartioning better with native storage on legacy iSeries
  - Sync onboot behavior of gui/text network screens (#138011)
  - Load some drivers later to try to avoid having FC disks be sda
  - Sizes in ks.cfg need to be an integer (#138109)


author: Jeremy Katz <katzj@redhat.com> - 10.1.1.3-1
changelog:
  - Pull in firefox on upgrade if mozilla/netscape were installed (#137244)
  - Fix s390 tracebacks (#130123, #137239)


author: Jeremy Katz <katzj@redhat.com> - 10.1.1.2-1
changelog:
  - Handle our LVM autopart lines slightly better (#137120)
  - Use busybox sleep for s390 since sleep requires librt again (#131167)
  - Handle onboot in ks.cfg properly in the loader (#136903)
  - Punjabi shouldn't try to do text mode (#137030)
  - Add sgiioc4 driver for Altix CD installs (#136730)
  - pci.ids trimming (notting)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.21-1
changelog:
  - Lowercase OSA addresses to make the kernel happy (#133190)
  - Don't hard code the VG name used for auto-partitioning to avoid 
    colliding with existing ones
  - Make sure that we don't do runlevel 5 if people don't have X, etc 
    installed (#135895)
  - Update for new Indic font filenames


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.20-1
changelog:
  - Fix traceback with %post logging (Gijs Hollestelle, #136154)
  - When using a local stage2.img for FTP/HTTP install, give an error earlier 
    if you point at an invalid tree (#135603, #117155, #120101)
  - Add a trailing newline to /etc/sysconfig/kernel
  - Try to fix the icon theme
  - Rebuild against new dietlibc, hopefully fixes CJK text installs


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.19-1
changelog:
  - Fix font size to fit on disk display better (#135731)
  - Write out part lines for autopart lvm correctly (#135714)
  - Remove empty row in drive order for boot loader (#135944)
  - Replace % in URLs to avoid format string weirdness (#135929)
  - Bind mount /dev for rescue mode (#135860)
  - Fix Dutch and Danish keyboard defaults (#135839)
  - add s2io 10GbE driver


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.18-1
changelog:
  - Add fonts for ta, gu, bn, hi, pa (#119283)
  - Re-enable bterm for testing (#113910)
  - Fix segfault when using biospart with a ks hdinstall.  Patch from 
    Rez Kabir (#135609)
  - Write out /etc/sysconfig/kernel for use with new-kernel-pkg changes (#135161)
  - Fix telnet logins for s390 (karsten)
  - Hardcode LCS as eth instead of tr (karsten)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.17-1
changelog:
  - Only use "our" LVM partitions with auto-partitioning (#135440)
  - Remove localboot option from syslinux.cfg for diskboot.img (#135263)
  - Handle the great input method switch on upgrade (#129218)
  - Don't save the hwaddr for qeth (#135023)
  - Add rhgb boot loader arguments in postinstall (msw)
  - Reverse Norwegian blacklisting (#129453) (notting)
  - Add sata_nv, sata_sx4, ixgb, ahci, sx8 modules to the initrd (notting)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.16-1
changelog:
  - s390/s390x: Fix traceback with unpartitioned disks (karsten)
  - improve fit of bengali network screen (#134762)
  - don't allow formatting of a pre-existing partition without also 
    mounting it (#134865)
  - Don't show "0" as a mountpoint for an LV that's not being mounted (#134867)
  - Add prelink config bits (#117867)
  - Sort packages in text package group details (#123437)
  - Don't traceback on upgrade if /dev/mapper/control exists (#124092)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.15-1
changelog:
  - Fix creation of scsi device nodes (#134709)
  - Fix multiple kickstart scriptlets with different interpreters (#134707)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.14-1
changelog:
  - Some zfcp fixes
  - Don't traceback if we have a %include inside a scriptlet (#120252)
  - Fix SELinux for text-mode ftp/http installs (#134549)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.11-1
changelog:
  - Handle 32 raid devs (#134438)
  - Fix LCS PORTNAME (#134487)
  - Add logging of kickstart scripts with --log to %post/%pre
  - Copy /tmp/anaconda.log and /tmp/syslog to /var/log/anaconda.log 
    and /var/log/anaconda.syslog respectively (#124370)
  - Fix Polish (#134554)
  - Add arch-specific package removal (#133396)
  - Include PPC PReP Boot partition in anaconda-ks.cfg (#133934)
  - Fix changing of VG name going through to boot loader setup (#132213)
  - Add support for > 128 SCSI disks (#134575)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.10-1
changelog:
  - add kickstart zfcp configuration (#133288, #130070)
  - Use NFSv3 for NFS installs.  Fixes NFSISO installs from DVD (#122032)
  - Fix megaraid_mbox module name (#134369)
  - Another uninitialized fix (#133996)
  - Add the zh_CN font (#133330)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.9-1
changelog:
  - translation updates
  - Install compat-arch-support by default (#133514)
  - Warn if an older version is chosen for upgrading if product is RHEL (#134523)
  - Fix traceback on upgrade with possible lvm1 (#134258)
  - Make changing the DNS server work (#122554)
  - More fixes from pnasrat for arch handling on upgrade


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.7-1
changelog:
  - Don't ask about mouse type on remote X display (#133902)
  - Label swap filesystems (#127892)
  - Fix possible crash on hd kickstart installs (#133996)
  - Improve multiarch upgrade (#133045)
  - Avoid changing the default language when selecting additional 
    language support (#134040)
  - Remove spurious blank option in upgrade combo (#134058)
  - Fix driver disk hang (#131112, #122952)
  - Fix detection of unformatted dasd (#130123)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.6-1
changelog:
  - Fix traceback from auto-partitioning if you don't have enough space (#131325)
  - Update FCP config for adding SCSI LUNs (#133290)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.5-1
changelog:
  - Fix driver disk segfault when using a partition (#133036)
  - Let driver disk images on ext2 partitions work
  - Fix nonet/nostorage
  - Allow name.arch syntax in ks.cfg (#124456)
  - Fix traceback unselecting last language (#133164)
  - Skip version 0 swap (#122101)
  - Handle /dev being present in device names of ks.cfg (#121486)
  - Use no instead of no-latin1 for Norwegian keyboard (#133757)
  - include other dm modules (#132001)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.4-1
changelog:
  - fix megaraid module name (notting)
  - don't prompt for a driver disk on pSeries boxes with just 
    virtual devices (#135292)
  - don't use PROBE_LOADED for cd probe (#131033)
  - i2o devices don't use a "p" separator (#133379)
  - switch back zh_CN font to default (#133330)
  - add 3w-9xxx to modules.cgz (#133525)
  - fix showing of freespace (#133425)


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.3-1
changelog:
  - fix going back unmount of /dev/pts (#133301)
  - fix SRPMs disc (#122737)
  - add localboot option to isolinux.cfg (#120687)
  - fix tree build on ia64 and x86_64
  - fix a syntax error for text mode selinux config


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.2-1
changelog:
  - some fixes for Arabic (#122228)
  - support using ksdevice=macaddr (#130605)
  - add an images/pxeboot directory on ia64


author: Jeremy Katz <katzj@redhat.com> - 10.0.3.1-1
changelog:
  - improve handling of non-physical consoles on some ppc and ia64 machines
  - add Bengali(India) and Gujarati to the lang-table (#126108)
  - add support for setting the CTC protocol on s/390 (#132324, #132325)
  - don't offer to do vnc if we don't have active nwtorking (#132833)
  - various typo/grammar fixes
  - add support for 'nostorage' and 'nonet' command line options to avoid 
    auto-loading just network or storage devices
  - fix editing of pre-existing lvm (#132217)
  - fix going back from the partitions list on a driver disk (#132096)
  - don't show login error if silent errors (#132673)


author: Matt Wilson <msw@redhat.com>
changelog:
  - moved init script for reconfig mode to /etc/init.d/reconfig
  - move the initscript back to /etc/rc.d/init.d
  - Prereq: /etc/init.d


author: Chris Ricker <kaboom@oobleck.net> 4.2.7-8
changelog:
  - Update for Fedora Extras
  - Don't strip binaries
  - Preserve time stamps
  - Update BuildRoot
  - Drop unapplied patch
  - Clean up info handling
  - Include license and other docs


author: Tim Powers <timp@redhat.com>
changelog:
  - rebuild on all arches
  - let rpm handle the gzipping of files
  - remove stuff from the buildroot that won't be included in the resulting package


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - set CHESS_PROGRAM to gnuchess instead of gnuchessx
    (it isn't available anymore after the update to chess-5)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - gzip info pages (Bug #9035)
  - add install-info stuff
  - deal with rpm compressing man pages
  - handle RPM_OPT_FLAGS


author: Rex Dieter <rexdieter[AT]users.sf.net> - 0.6.7-0.fdr.2
changelog:
  - remove "We decided..." part of description
  - remove hard-coded .gz info references
  - Req(preun)->Preq(postun): /sbin/install-info


author: Dominik Mierzejewski <rpm@greysector.net> 0-0.3.20060309
changelog:
  - patch to fix 32bit builds on 64bit
  - updated to 20060309 snapshot
  - changed project and download urls


author: PLD Team <feedback@pld-linux.org>
changelog:
  All persons listed below can be reached at <cvs_login>@pld-linux.org

  Revision 1.28  2004/02/29 18:01:25  pawelb
  - up to 20040228

  Revision 1.27  2003/11/17 22:15:52  adgor
  - Partially reverted

  Revision 1.26  2003/11/17 21:46:36  adgor
  - Changed versioning policy (ver 0.%{_snap}; rel 1)
  - Added post/postun /sbin/ldconfig
  - libtlen.so moved to devel subpkg

  Revision 1.25  2003/11/16 09:27:35  jack
  - updated to snap 20031115

  Revision 1.24  2003/11/08 20:44:23  jack
  - updated to 20031108 snap

  Revision 1.23  2003/08/29 11:15:25  adgor
  - Added %{release} to req

  Revision 1.22  2003/08/18 08:08:17  gotar
  - mass commit: cosmetics (removed trailing white spaces)

  Revision 1.21  2003/07/11 12:28:23  ankry
  - URL fixes and other cosmetics

  Revision 1.20  2003/06/27 13:10:47  mmazur
  - mass commit; now req: name = epoch:version

  Revision 1.19  2003/05/28 12:59:32  malekith
  - massive attack: source-md5

  Revision 1.18  2003/05/25 05:50:04  misi3k
  - massive attack s/pld.org.pl/pld-linux.org/

  Revision 1.17  2003/04/18 14:45:32  radek
  - snap 20030415

  Revision 1.16  2003/02/17 11:32:06  radek
  - updated Source0 URL

  Revision 1.15  2003/02/03 19:17:17  krzak
  - snap 20030130

  Revision 1.14  2002/11/23 02:06:12  aflinta
  - updated to snap 20021122
  - removed destdir.path which is now obsoleted

  Revision 1.13  2002/11/19 15:23:33  aflinta
  - updated descriptions
  - version is 0 cause there is no version except snaps
  - Epoch 1
  - updated URL's

  Revision 1.12  2002/10/30 16:45:55  aflinta
  - normal URL is back ;)

  Revision 1.11  2002/10/29 23:41:28  aflinta
  - updated to snap 20021029

  Revision 1.10  2002/10/29 23:18:58  aflinta
  - libsigc++ seems to be not needed, everything is working without it

  Revision 1.9  2002/10/26 10:36:27  ggodlewski
  - url changed to ip - some problem with dns

  Revision 1.8  2002/10/25 15:39:23  ggodlewski
  - updated to 20021024

  Revision 1.7  2002/09/21 14:08:47  aflinta
  - updated to snapshot 20020920

  Revision 1.6  2002/09/16 16:22:42  qboosh
  - typos, cosmetics

  Revision 1.5  2002/09/15 13:00:46  aflinta
  - splited into subpackages
  - snapshot 20020914

  Revision 1.4  2002/09/12 10:13:09  trojan
  - BuildRequires: libsigc++1-devel instead libsigc++-devel

  Revision 1.3  2002/05/24 11:04:31  gotar
  - ac/am macros

  Revision 1.2  2002/05/24 10:58:30  gotar
  - new %doc

  Revision 1.1  2002/05/23 07:56:05  gotar
  - initial release, STBR.


author: Mike A. Harris <mharris@redhat.com> 3.5.5-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193427)
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 3.5.4.1-1
changelog:
  - Updated libXpm to version 3.5.4.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Added "Requires: libX11-devel" to devel subpackage as xpm.h includes various
    X headers. (#174163)
  - Added missing build dep libXau-devel


author: Mike A. Harris <mharris@redhat.com> 3.5.4-1
changelog:
  - Updated libXpm to version 3.5.4 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Mike A. Harris <mharris@redhat.com> 3.5.2-4
changelog:
  - Although ./configure checks for libXt and libXext, and indicates
    that they are missing, it continues to build anyway, and just does not
    build sxpm if they are not present.  Therefore, libXt-devel and
    libXext-devel are required build deps in order to get sxpm built.
  - Added missing defattr to devel subpackage.


author: Mike A. Harris <mharris@redhat.com> 3.5.2-2
changelog:
  - Renamed package to prepend "xorg-x11" to the name for consistency with
    the rest of the X11R7 packages.
  - Added "Requires: %{name} = %{version}-%{release}" dependency to devel
    subpackage to ensure the devel package matches the installed shared libs.
  - Added missing sxpm binary to devel subpackage
  - Added virtual "Provides: lib<name>" and "Provides: lib<name>-devel" to
    allow applications to use implementation agnostic dependencies.
  - Added post/postun scripts which call ldconfig.
  - Added Conflicts with XFree86-libs and xorg-x11-libs to runtime package,
    and Conflicts with XFree86-devel and xorg-x11-devel to devel package.


author: Miloslav Trmac <mitr@redhat.com> - 4.14-1
changelog:
  - Update to stunnel-4.14
  - Override changed default pid file location, keep it in %{_localstatedir}/run


author: Miloslav Trmac <mitr@redhat.com> - 4.11-1
changelog:
  - Update to stunnel-4.11
  - Fix int/size_t mismatches in stack_info ()
  - Update Certificate-Creation for /etc/pki


author: Nalin Dahyabhai <nalin@redhat.com> 3.20-1
changelog:
  - log using LOG_AUTHPRIV facility by default (#47289)
  - make permissions on stunnel binary 0755
  - implicitly trust certificates in %{_datadir}/ssl/trusted (#24034)


author: Nalin Dahyabhai <nalin@redhat.com> 3.19-1
changelog:
  - update to 3.19 to avoid problems with stunnel being multithreaded, but
    tcp wrappers not being thrad-safe


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - remove explicit requirement on openssl (specific version isn't enough,
    we have to depend on shared library version anyway)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 3.11
  - chuck the SIGHUP patch (went upstream)
  - chuck parts of the 64-bit clean patch (went upstream)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move to Applications/Internet group
  - clean up %post script
  - make stunnel.pem %ghost %config(noreplace)
  - provide a sample file for use with xinetd


author: Brian Pepple <bpepple@fedoraproject.org> - 0.9.1-2
changelog:
  - Update to 0.9.1.
  - Add patch to fix bonobo.
  - Bump version of pygtk2.
  - Cleanup scriptlets.
  - Drop poster patch & makefile patchs.


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 0:0.8-0.fdr.3
changelog:
  - No longer include gnome-blog-poster in the library path.  It only belongs
    in the bindir.
  - Switch to the new python macros for python-abi.
  - Switch to python_sitelib in the files section.  Makes gnome-blog build on
    x86_64.
  - Change group to Applications/Internet.


author: Brian Pepple <bdpepple@gmail.com> - 0:0.8-0.fdr.1
changelog:
  - Updated to 0.8.
  - Removed code from spec file that fixed location of blog_applet.py, since this was corrected upstream.
  - Added requires for gnome-python2-gnomevfs.


author: Brian Pepple <bdpepple@ameritech.net> 0:0.7-0.fdr.6
changelog:
  - Added GConf requirement, and removed PreReq on gconftool-2.
  - Under %file, changed static python location with appropriate variables.
  - Added gnome-blog subdir to %files.
  - Changed source permissions to 644.
  - Added fix for libexec of blog-applet.py


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0:0.7-0.fdr.5
changelog:
  - Add Epoch to Requires that have versions
  - Cleanup postin/preun scripts for schema install/uninstall
  - And get rid of call to ldconfig
  - Make package noarch
  - Require python version because of python2.2/site-lib directory
  - Remove GConf2 as a prereq because gconftool-2 will pull it in.
  - Remove INSTALL file from docs (generic INSTALL)
  - Change Source0 to point to ftp.gnome.org
  - Use desktop-file-install to install the desktop file with --vendor=fedora,
    and adding the X-Fedora and Network categories
  - We don't need both .pyc and .pyo files so %ghost the pyo's


author: Brandon Holbrook <fedora at theholbrooks.org> 0.3.1-5
changelog:
  - New FE php macros
  - Minor syntax / permission changes
  - Added BR: pkgconfig for new buildroot
  - New php_extdir and php_apiver from FE PHP Packaging Guidelines


author: Brandon Holbrook <fedora at theholbrooks.org> 0.3a-5
changelog:
  - Upgraded to 0.3a (tarball has not been phpize'd to save space)
  - Minor %define fixes
  - spaces2tabs
  - mkdir has been replaced with 'install -D'
  - Moved the 'phpize' calls from %prep to %build


author: Brandon Holbrook <fedora at theholbrooks.org>
changelog:
  - Upgraded to 0.1.4
  - Added 'phpize --clean; phpize' to setup phase
  - Removed redundant 'Requires:' implied by BuildRequires
  - Replaced $RPM_BUILD_ROOT with %{buildroot}


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 2.0.3-0.20070309
changelog:
  - Enable support for TCP wrappers (--enable-tcp-wrapper).
  - Optional support for spoofed source addresses (--enable-spoof-source)
    (disabled by default; build requires libnet).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 2.0.2-2
changelog:
  - Dynamic link glib2 and eventlog (--enable-dynamic-linking).
    For Fedora Core 6 (and above) both packages install their dynamic
    libraries in /lib.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.6.10-2
changelog:
  - Build option to support the syslog-ng spoof-source feature
    (the feature spoof-source is disabled by default).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.6.9-1
changelog:
  - Build conflict statement
    (see: https://lists.balabit.hu/pipermail/syslog-ng/2005-June/007630.html)


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.6.7-3
changelog:
  - Shipping the sysklogd logrotate file and using the same pidfile
    as suggested by Jeremy Katz.
  - Patching the init script: no default runlevels.
  - Removed the triggers to handle the logrotate file (no longer needed).
  - The SELinux use_syslogng boolean has been dropped (rules enabled).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.6.7-2.fc4
changelog:
  - Increased libol required version to 0.3.16
    (https://lists.balabit.hu/pipermail/syslog-ng/2005-May/007385.html).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.7-0.fdr.1
changelog:
  - Update to 1.6.7.
  - The Red Hat/Fedora Core configuration files are now included in the
    syslog-ng tarball (directory: contrib/fedora-packaging).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.6-0.fdr.4
changelog:
  - Logrotate file conflict: just comment/uncomment contents of the syslog
    logrotate file using triggers.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.6-0.fdr.2
changelog:
  - Added contrib/relogger.pl (missing in syslog-ng-1.6.6).
  - Requires libol 0.3.15.
  - Added %trigger scripts to handle the logrotate file.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.5-0.fdr.7
changelog:
  - Took ownership of the configuration directory (/etc/syslog-ng/).
  - Updated the syslog-ng(8) manpage (upstream patch).
  - Updated the configuration file: /proc/kmsg is a file not a pipe.
  - Patched two contrib files: syslog2ng and syslog-ng.conf.RedHat.
  - Logrotate file inline replacement: perl --> sed (bug 1332 comment 23).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.5-0.fdr.6
changelog:
  - Logrotate problem: only one logrotate file for syslog and syslog-ng.
  - Configuration file: don't sync d_mail destination (/var/log/maillog).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.5-0.fdr.5
changelog:
  - SIGHUP handling upstream patch (syslog-ng-1.6.5+20050121.tar.gz).
  - Static linking /usr libraries (patch already upstream).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.6.5-0.fdr.4
changelog:
  - make: do not strip the binaries during installation (install vs install-strip)
    (bug 1332 comment 18).
  - install: preserve timestamps (option -p) (bug 1332 comment 18).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> 0:1.6.5-0.fdr.1
changelog:
  - update to 1.65.
  - removed the syslog-ng.doc.patch patch (already upstream).
  - removed the syslog-ng.conf.solaris documentation file.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> 0:1.6.2-0.fdr.3
changelog:
  - removed Conflits:
  - changed the %post and %preun scripts
  - splitted Requires( ... , ... ) into Requires( ... )


author: Jose Pedro Oliveira <jpo at di.uminho.pt> 1.6.0rc2 snapshot
changelog:
  - Reorganized specfile
  - Corrected the scripts (%post, %postun, and %preun)
  - Commented the mysql related lines; create an option for future inclusion


author: Richard E. Perlotto II <richard@perlotto.com> 1.5.23-2
changelog:
  - Corrected the mass of errors that occured with rpmlint
  - Continue to clean up for the helpful hints on how to write to a database


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0:2.0.6-2
changelog:
  - Change %python_sitearch to %python_sitelib as sitearch references
    /usr/lib64 on x86_64 multilib and the python files install to /usr/lib.


author: Oliver Falk <oliver@linux-kernel.at> - 2.14-1
changelog:
  - Update
  - Add a complete URL for Source0
  - Beautifying (fix identations and make it look more like the
    spectemplate-perl.spec)


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 15-1
changelog:
  - Figures, NOW I notice the new version
  - Adapted/removed patches (most fixes moved upstream, thanks!)


author: Aurelien Bompard <gauret[AT]free.fr> 0:0-0.fdr.2.20040307
changelog:
  - apply suggestion from QA, see bug 1691:
    - fix scriptlets and scriptlets requirements
    - move contrib to a useful place
    - add ucs.ps.gz and languages.ps.gz to the doc


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-jamstudio to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for jamstudio input driver generated automatically
    by my xorg-driverspecgen script.


author: Rob Crittenden <rcritten@redhat.com> 1.0.6-2
changelog:
  - Patch to properly detect the Apache model and set up NSS appropriately
  - Patch to punt if a bad password is encountered
  - Patch to fix crash when password.conf is malformatted
  - Don't enable ECC support as NSS doesn't have it enabled (3.11.4-0.7)


author: Chris Petersen <rpm@forevermore.net> 0.9-1
changelog:
  - Preliminary build for 0.9
  - Yay, no more underscores
  - Seems that we don't need the lib64 sed stuff, either


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1.1-2
changelog:
  - Fix a divide by zero crash when playing against the computer
  - Add missing BuildRequires: jpgalleg-devel, libGLU-devel


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - mention that we are upstream
  - clean buildroot before installing
  - fix licensing blurb in PO files


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.38
changelog:
  - get list of configuration parameters and defaults from testparm, fix
    duplicate dict keys (#219308)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.29-1
changelog:
  - fix deprecation warnings (#153051) with patch by Colin Charles
  - update the GTK+ theme icon cache on (un)install (Christopher Aillon)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.26-1
changelog:
  - ignore case of share name when deleting share (#144504)
  - when double clicking share, open properties dialog


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - assume default is "security == user" to avoid traceback on users dialog
    (#144511)
  - update main window when changing share path (#144168)
  - include Ukrainian translation in desktop file (#143659)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.25-1
changelog:
  - use correct option menu for encrypt password
  - use lower case for security value
  - mask default values with a ";" instead of removing them altogether


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.24-1
changelog:
  - revamp BasicPreferencesWin.readFile() (#143951)
  - remove stray debugging statement
  - pick up new strings to be translated


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.23-1
changelog:
  - totally revamp how parsed smb.conf is handled internally (class
    SambaSection), among other things to not screw up smb.conf when editing share
    names (#143291)
  - don't assume all users selected == "guest ok"
  - make About/Copyright easily extensible without screwing up translations
  - admit complicity
  - remove tab indentation
  - some more code consolidation
  - pick up updated translations


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.20-1
changelog:
  - use template file if smb.conf is missing (#131323)
  - when saving smb.conf, write to new file and rename (#131323)
  - set safe umask (#131323)


author: Nils Philippsen <nphilipp@redhat.com> - 1.2.14-1
changelog:
  - make share name configurable (#110804, use patch from Philip Van Hoof, fix
    it up a bit)
  - do some more code consolidation


author: Brent Fox <bfox@redhat.com> 1.2.2-1
changelog:
  - fix glade file path problem
  - wrap smbpasswd in quotes (bug #112528)
  - don't call lower() on server string (bug #111758)


author: Brent Fox <bfox@redhat.com> 1.2.0-1
changelog:
  - rename from redhat-config-samba to system-config-samba
  - add Obsoletes for redhat-config-samba
  - update for Python2.3


author: Brent Fox <bfox@redhat.com> 1.0.13-1
changelog:
  - apply patch from Nalin to handle Samba3 changes
  - fix selection problem with security option menu for ADS


author: Brent Fox <bfox@redhat.com> 1.0.12-1
changelog:
  - sambaDefaults.py: encrypt password default is "Yes" (bug #103752)
  - basicPreferencesWin.py: Make encrypt passwd menu default to "Yes" (bug #103752)


author: Brent Fox <bfox@redhat.com> 1.0.4-1
changelog:
  - handle problems with valid/invalid users (bug #84271)
  - handle 'public' as a synonym of 'guest ok' (bug #84272)


author: Brent Fox <bfox@redhat.com> 1.0.1-6
changelog:
  - add 'authentication server' (bug #82049)
  - remove 'update encrypted'
  - force encrypted passwords with domain security (bug #82050)


author: Tammy Fox <tfox@redhat.com> 1.0.1-1
changelog:
  - make popup windows transient (bug #81402)
  - require a workgroup name
  - strip strings before comparing to empty


author: Tammy Fox <tfox@redhat.com>
changelog:
  - use stock icons for menu items
  - add about box
  - center popup windows
  - set modal to true for popup windows


author: David Walluck <david@anti-microsoft.org> 0:4.1-5jpp
changelog:
  - add Distribution and Vendor tags
  - fix jpackage-utils requirement
  - change gmake to %__make
  - break %description lines


author: Mark McLoughlin <markmc@redhat.com> 2.12.1-3
changelog:
  - Add patch to set the size of the IO thread stack to 256k in
    order to mitigate the apparent 10M jump in GNOME processes
    memory usage (#157297)


author: Mark McLoughlin <markmc@redhat.com> 2.10.0-4
changelog:
  - Backport alignment fix for 64 bit from 0.10.3 - fixes Nautilus crashing
    on startup (#126181). Thanks to Lamont R. Peterson <lamont@gurulabs.com>


author: Havoc Pennington <hp@redhat.com>
changelog:
  - build system somehow built against libglib-1.3.so.11
    even though pkg-config found 1.3.12? wtf?
    trying again


author: Havoc Pennington <hp@redhat.com>
changelog:
  - renaming more things
  - remove smp flags, doesn't work atm
  - fix .pc file, trying to get bonobo-activation to build


author: Steven Pritchard <steve@kspei.com> 0.2700-1
changelog:
  - Update to 0.27.
  - Cleanup to more closely match cpanspec output.
  - Switch to Module::Build-based build.
  - BR: IO::Scalar, Unicode::Map, and Jcode.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:1.1.1-0.fdr.2
changelog:
  - Added BuildReq gettext.
  - Added find_lang.
  - Explicitly set permissions on install of icon and desktop entry.
  - Changed path of Source0.


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 2.12.0-4
changelog:
  - Add a patch from gnome-common cvs to address bug #218717 (gnome-common
    does not work with automake-1.10).


author: Toshio Kuratomi <toshio-tiki-lounge.com> - 0:2.8.0-1
changelog:
  - Update to 2.8.0
    + This release supports automake thru version 1.9 and has had a lot of
      deprecated stuff cleaned out.
  - Removed BuildRequires.  A base mach build environment will build it now.
  - Removed Requires.  Although gnome-common still requires autoconf and
    friends, it doesn't require a specific version of them.  There's no virtual
    provides in the automake14,15,16,17 automake packages that could help here.


author: Toshio Kuratomi <toshio-tiki-lounge.com> - 0:2.4.0-0.fdr.2
changelog:
  - Update the Requires line (rpm doesn't automatically detect most of the
    dependencies.)
  - Remove the AUTHORS file as it's currently empty


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.6-8
changelog:
  - Use definition of an empty structure as it is not an opaque type (BZ 233716).
  - Fixed the gdb.base/attachstop.exp testcase false 2 FAILs.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.6-3
changelog:
  - Fix a race during attaching to dying threads; backport (BZ 209445).
  - Testcase of unwinding has now marked its unsolvable cases (for BZ 140532).


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.6-2
changelog:
  - Backported post gdb-6.6 release PPC `show endian' fixup.
  - Fix displaying of numeric char arrays as strings (BZ 224128).
  - Simplified patches by merging upstream accepted ones into a single file.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.6-1
changelog:
  - Upgrade to GDB 6.6.  Drop redundant patches, forward-port remaining ones.
  - Backported post gdb-6.6 release ia64 unwinding fixups.
  - Testcase for exec() from threaded program (BZ 202689).


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-26
changelog:
  - Fix unwinding of non-debug (.eh_frame) PPC code, Andreas Schwab (BZ 140532).
  - Fix unwinding of debug (.debug_frame) PPC code, workaround GCC (BZ 140532).
  - Fix missing testsuite .log output of testcases using get_compiler_info().


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-23
changelog:
  - Find symbols properly at their original (included) file (BZ 109921).
  - Remove the stuck mock(1) builds disfunctional workaround (-> mock BZ 221351).


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-22
changelog:
  - Fix unwinding crash on older gcj(1) code (extended CFI support) (BZ 165025).
  - Include testcase for the readline history of input mode commands (BZ 215816).


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-21
changelog:
  - Try to reduce sideeffects of skipping ppc .so libs trampolines (BZ 218379).
  - Fix lockup on trampoline vs. its function lookup; unreproducible (BZ 218379).


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-20
changelog:
  - Fix bogus 0x0 unwind of the thread's topmost function clone(3) (BZ 216711).
  - Testcase for readline segfault on excessively long hand-typed lines.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-19
changelog:
  - Fix attachment also to a threaded stopped process (BZ 219118).
  - Cleanup any leftover testsuite processes as it may stuck mock(1) builds.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-14
changelog:
  - Fix "??" resolving of symbols from (non-prelinked) debuginfo packages.
  - Fix "??" resolving of symbols from overlapping functions (nanosleep(3)).
  - Also disable testcase "checkpoint.exp" for a possible kernel Bug 207002.
  - Provided (disabled during build) threading testsuite from BEA.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-11
changelog:
  - No longer disassemble invalid i386 opcodes of movQ/movA (BZ 172034).
  - Simplify the IPv6 patch for gdbserver (BZ 198365).
  - Suggest fixing your target architecture for gdbserver(1) (BZ 190810).
  - Fix dereferencing registers for 32bit inferiors on 64bit hosts (BZ 181390).
  - Fix `gcore' command for 32bit inferiors on 64bit hosts.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-10
changelog:
  - Support IPv6 for gdbserver (BZ 198365).
  - Temporarily disable testcase "chng-syms.exp" for a possible kernel Bug 207002.


author: Jan Kratochvil <jan.kratochvil@redhat.com> - 6.5-9
changelog:
  - Fix crash on C++ symbol failing to be demangled (BZ 206813).
  - Fix attach to stopped process, supersede `gdb-6.3-attach-stop-20051011.patch'.
  - Fix TLS symbols resolving for objects with separate .debug file (-debuginfo).
  - Fix TLS symbols resolving for shared libraries with a relative pathname.
  - Support TLS symbols (+`errno' suggestion if no pthread is found) (BZ 185337).


author: Alexandre Oliva <aoliva@redhat.com> - 6.5-5
changelog:
  - Backport support for i386 nop memory instructions.
  - Fix debuginfo addresses resolving for --emit-relocs Linux kernels
  (BZ 203661, from Jan Kratochvil, like the remaining changes).
  - Bugfix segv on the source display by ^X 1 (fixes Patch130, BZ
  200048).
  - Do not step into the PPC solib trampolines (BZ 200533).
  - Fix exec() from threaded program, partial CVS backport (BZ 182116).
  - Fix occasional failure to load shared libraries (BZ 146810).
  - Bugfix object names completion (fixes Patch116, BZ 193763).
  - Avoid crash of 'info threads' if stale threads exist (BZ 195429).
  - Handle corrupted or missing location list information (BZ 196439).


author: Alexandre Oliva <aoliva@redhat.com> - 6.5-3
changelog:
  - Add missing definition of multilib_64_archs for glibc-devel buildreqs.
  - Backport support for .gnu.hash sections.


author: Alexandre Oliva <aoliva@redhat.com> - 6.5-2
changelog:
  - BuildReq sharutils, prelink and, on multilib systems, 32-bit glibc-devel.
  - Drop obsolete attach-stop patch.
  - Fix testcases in threaded-watchpoints2 and step-thread-exit patches.
  - Re-enable attach-pie.exp, asm-source.exp and sigstep.exp tests.


author: Alexandre Oliva <aoliva@redhat.com> - 6.5-1
changelog:
  - Upgrade to GDB 6.5.  Drop redundant patches, forward-port remaining
  ones.  Re-enable ada and objc testsuites.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.132
changelog:
  - Require flex and bison at build time.
  - Additional patch for BZ 175083, to cope with waitpid setting status
  even when returning zero.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.130
changelog:
  - Rewrite patch for BZ 175270, BZ 175083 so as to catch the exception
  earlier.
  - Remove too-fragile testcases from patches for CFA value and "S"
  augmentation.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.128
changelog:
  - Avoid race conditions caused by exceptions messing with signal masks.
  (BZ 175270, BZ 175083, maybe BZ 172938).
  - Hardcode /bin and /usr/bin paths into gstack (BZ 179829, BZ 190548).
  - Build in a subdir of the source tree instead of in a sibling directory.
  - Switch to versioning scheme that uses the same base revision number
  for all OSes, and uses a suffix to tell the builds apart and ensure
  upgradability.


author: Stepan Kasal <skasal@redhat.com> - 6.3.0.0-1.123
changelog:
  - Use fopen64 where available.  Fixes BZ 178796, BZ 190547.
  - Use bigger numbers than int.  Fixes BZ 171783, BZ 179096.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.119
changelog:
  - Fix regression in PIE debugging (BZ 133944) (re?)introduced by the
  prelink fix (BZ 175075, BZ 190545).  Improve testcase for the prelink
  fix.
  - Revert dwarf2 frame identifier change.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.115
changelog:
  - Change dwarf2 frame identifiers to use the actual PC instead of the
  function's entry point.
  - Fix FSF and GDB contact addresses in new testcases.
  - Do not try to compile x86_64-only CFA testcase on 32-bit x86.
  - Change prelink test to issue untested instead of warning message if
  system libraries are not prelinked.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.111
changelog:
  - Add support for "S" augmentation for signal stack frames.
  - Add support for CFA value expressions and encodings.
  - Various improvements to the prelink test.


author: Alexandre Oliva <aoliva@redhat.com> - 6.3.0.0-1.107
changelog:
  - Enable gdb to debug core files and executables with mismatched
  prelink base addresses.  Fixes BZ 175075, BZ 190545.


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-1.50
changelog:
  - Fix bug with info frame and cursor address on ia64.
  - Add testcase to verify pseudo-registers calculated for ia64 sigtramp.
  - Bugzilla 160339


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-1.16
changelog:
  - Update ia64 sigtramp support to use libunwind and fix top-level
    rse register reads to also use libunwind.
  - Bugzilla 151741


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-0.32
changelog:
  - Modify debug register handling for x86, x86-64 to be thread-specific.
  - Modify threaded watchpoint code for x86, x86-64 to properly insert
    and remove watchpoints on all threads.


author: Andrew Cagney <cagney@redhat.com> 6.3.0.0-0.29
changelog:
  - Modify gdb-6.3-dwattype0-20050201.patch to check for a zero address
    and not zero unsnd.  Fix BE 32- vs 64-bit problem.


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-0.15
changelog:
  - Tolerate DW_AT_type referencing <0> and instead of generating an
    error, treat as unknown type.
  - Bugzilla 144852.


author: Andrew Cagney <cagney@redhat.com> 6.3.0.0-0.11
changelog:
  - gdb-6.3-ppcdotsyms-20050126.patch: Backport BFD changes for reading
    synthetic symbols.  Rewrite code reading elf minimal symbols so that
    it includes synthetics.


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-0.10
changelog:
  - Fix to prevent resetting unwind kernel table size to invalid value
    when debugging a core file
  - Bugzilla 145309


author: Andrew Cagney <cagney@redhat.com> 6.3.0.0-0.9
changelog:
  - When single stepping handle both back-to-back and nested signals.
  - Disable .symbol patch, results in BFD errors.


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-0.8
changelog:
  - Support listing both in-charge and not-in-charge dtors when
    just the dtor name is given.
  - Add new test case for newly added ctor/dtor functionality.


author: Jeff Johnston <jjohnstn@redhat.com> 6.3.0.0-0.7
changelog:
  - Fix to allow breaking by line in both the in-charge and
    not-in-charge ctor/dtor.
  - Bugzilla 117826


author: Elena Zannoni <ezannoni@redhat.com> 6.3.0.0-0.1
changelog:
  Andrew Cagney <cagney@redhat.com>	
                    Jeff Johnston <jjohnstn@redhat.com>	
  - Various fixes to complete the import and merge.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.60
changelog:
  - For PPC-64, do not set malloc name to ".malloc"; no longer needed.
  - For all, only define kfail when not already defined.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.58
changelog:
  - Add rs6000 reggroups; fixes problem of PS register being trashed
    causing mysterious branch breakpoints.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.57
changelog:
  - Backport i386 prolog parser - better backtraces out of semop().
  - Add option --readnever to suppress the reading of symbolic debug
    information.
  - Add script gstack.sh, installed as gstack.
    Bugzilla 136584, 137121
  - Add missing files gdb.pie/attach2.c, gdb.pie/break1.c and
    gdb.pie/Makefile.in along with testsuite/configure stuff for pie.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.57
changelog:
  - Backport i386 prolog parser - better backtraces out of semop().
  - Add option --readnever to suppress the reading of symbolic debug
    information.
  - Add script gstack.sh, installed as gstack.
    Bugzilla 136584, 137121


author: Elena Zannoni <ezannoni@redhat.com> 1.200400607.51
changelog:
  - Modify configure line to not use absolute paths. This was 
    creating problems with makeinfo/texinfo.
  - Get rid of makeinfo hack.
  Bugzilla 135633


author: Andrew Cagney <cagney@redhat.com> 1.200400607.43
changelog:
  - Hack around broken PT_FPSCR defined in headers.
  - Import latest s390 fixes.
  - Disable sigstep.exp - s390 has problems.
  - Use PC's symtab when looking for a symbol.
  - Work around DW_OP_piece.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.30
changelog:
  - Merge in mainline testsuite up to 2004-09-23, pick up sig*.exp tests.
    Merge in mainline infrun.c, pick up all infrun.c fixes.
    Generate bigcore's corefile from the running inferior.
    Limit bigcore's corefile to max file-size.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.24
changelog:
  - Fix single-stepping when a signal is pending, was exiting program.
    -- needs kernel fix so that ptrace(PT_STEP,SIG) doesn't do a PT_CONT.
    -- sigstep.exp tests pass with this fix applied.


author: Elena Zannoni <ezannoni@redhat.com> 1.200400607.23
changelog:
  - Delete some part of gdb-6.1post-test-rh.patch, to avoid confusing
    gdb when testing itself, and loading separate debug info.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.12
changelog:
  - Import wild frame ID patch.  Stops GDB incorrectly matching invalid
    frame IDs.
  - Disable bigcore on ia64 and amd64.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.11
changelog:
  - Fix testsuite to kill attach process (from corrinna/mainline).
  - Fix build problems with vsyscall patch.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.7
changelog:
  - Fix to ppc64 unwinder - handle glibcs function within syscall
    function hack.
  - Update sigbpt.exp, ena-dis-br.exp observer.exp signull.exp,
    step-test.exp and sizeof.exp, so that test names are architecture
    clean.
  - Disable bigcore.exp on PowerPC 64.


author: Andrew Cagney <cagney@redhat.com> 1.200400607.6
changelog:
  - Merge in mainline testsuite changes up to 2004-06-21.
  - Re-implement 32 and 64-bit PPC signal trampolines.
  - Check i386 and amd64 signal trampolines before dwarf2.
  - Allow tramp-frame when there is a symbol.
  - Test interaction between single-step, breakpoint and signal.
  - ABI: Fix PPC64 function parameters, sizeof long-double, and enum
    return values.


author: Elena Zannoni <ezannoni@redhat.com> 0.200400607.3
changelog:
  - Remove installation of mmalloc, and its info files.
  - Add hack to deal with differring info files generated by makeinfo.
  - Restore release number convention.


author: Elena Zannoni <ezannoni@redhat.com> 0.200400607.2
changelog:
  - Fix Requires and BuildRequires for libunwind dependencies.
  - Add patch to silence gcc3.4 warnings.


author: Elena Zannoni <ezannoni@redhat.com> 0.200400607.1
changelog:
  - New import: revamp everything. Remove all patches for now.
  - Update the Requires and BuildRequires sections.
  - Removed stupid Ada testcases (there is no ada support in gdb yet).


author: Jeff Johnston <jjohnstn@redhat.com> 0.20040223.6
changelog:
  - Fix thread support to recognize new threads even when they reuse
    tids of expired threads.  Also ensure that terminal is held by gdb
    while determining if a thread-create event has occurred.


author: Jeff Johnston <jjohnstn@redhat.com> 1.20031117.8
changelog:
  - Switch ia64-tdep.c to use new abi used by libunwind-0.95 and up.
  - Fix gate area specification for ia64-linux-tdep.c.
  - Fix long double support for ia64.


author: Elena Zannoni <ezannoni@redhat.com> 0.20031117.6
changelog:
  - Add patch to have unique binary names in the testsuite.
  - Disable s390/s390x pthread.exp test (FIXME)
  - Don't install any info files for the ppc platform. Let's take them
    from the ppc64 one (or we get install conflicts).
  - Remove generated info files from the source tree. They are generated
    as part of the FSF snapshot process.


author: Elena Zannoni <ezannoni@redhat.com> 0.20031117.5
changelog:
  - Add patches from old rpm for i386 support on x86_64.
  - Add build dependency on libunwind for ia64.


author: Elena Zannoni <ezannoni@redhat.com> 0.20031117.1
changelog:
  - Import new gdb snapshot from mainline FSF.
  - Fix some testfiles. 
  - Add fixes for gcore, and patch for libunwind support on ia64.
  - Add tests to see what versions of gcc, binutils, glibc and kernel we
    are running with.


author: Andrew Cagney <cagney@redhat.com> 0.20030710.36
changelog:
  - Rewrite ppc64 retun value methods so that they (hopefully)
  match the SysV spec.
  - Enable ppc64 testsuite.


author: Andrew Cagney <cagney@redhat.com> 0.20030710.35
changelog:
  - Hack around problem "break main" vs "break .main" when there is
  only a minimal ppc64 symbol table.  The former is a function descriptor
  and not where you want the breakpoint to go.  Only convert descriptors
  to pointers when the address is in the ".opd" section.


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.23
changelog:
  - Relax one testcase in selftest.exp a bit.
  - Accept different output as well in thread bt (platform dependent).
  - Enable testsuite run for ia64, ppc, s390 and s390x. They are in
    reasonably good shape.


author: Jeff Johnston <jjohnstn@redhat.com> 0.20030710.22
changelog:
  - Multiple ia64 fixes.
  - Fix ia64 printing of function pointers.
  - Fix ia64 prologue examination to ignore predicated insns if we
    haven't found the return address yet.
  - Skip dump.exp testcase for ia64


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.8
changelog:
  - Fix some tests by xfailing the correct target triplet for RedHat.
  - Remove include of config.h from pthreads.c testcases.


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.4
changelog:
  - Bring in sync with current head of gdb-6 branch.
  - Remove linespec patch, because included in the new sync patch.


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.3
changelog:
  - Add patch to avoid gdb segfault with bad debug info.
  - Change location of build tree to avoid conflicts with older versions
    possibly installed.


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.2
changelog:
  - Add patch to synchronize the current snapshot with the gdb-6 branch head.
  - Remove some patches that are includd in such diff.
  - Enable tests on AMD64 as well.


author: Elena Zannoni <ezannoni@redhat.com> 0.20030710.1
changelog:
  - Import new gdb snapshot.
  - Revamp gdb.spec. Get rid of patches that apply to older versions.
  - Add patches for ppc64 support, kfail and make gdb more robust in copingi
    with bad debug info.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.37
changelog:
  * Tue Jun 03 2003 Elena Zannoni  <ezannoni@redhat.com>  0.20021129.36
  - Enable warnings for x86_64, not x86-64.
  - Fix warnings from infptrace.c and dwarfread.c.
  - Print error message only when reading separate debug info really
    doesn't work (jimb@redhat.com).


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.33
changelog:
  - New tests for asm on s390x (jimb@redhat.com). Bugzilla 90503.
  - Fixes for prologue analysis on s390x (jimb@redhat.com). Bugzilla 90506.
  - bfd fix for 64-bit platforms (jimb@redhat.com).
  - Disable ppc64 builds until we have a port.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.29
changelog:
  - Include the gcore script, as gdb_gcore.sh and install it in
    /usr/bin as gcore.
  - One more disassembly fix for core files. Added to
    gdb-5.3post-disasm-mar2003.patch. Bugzilla 87677.
  - Enable build warnings for x86-64.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.28
changelog:
  - Fix Java strings printing.
  - Fix memory corruption in disassembly code. Bugzilla 85644.
  - Testsuite fixes (jimb@redhat.com). Bugzilla 85457.
  - Fixes for s390 stack handling (jimb@redhat.com). Bugzilla 85039.
  - Fixes for s390 struct return (jimb@redhat.com).


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.27
changelog:
  - Fixes for disassembly of code in threaded applications. Bugzilla 87495.
  - Fixes for s390 prologue analysis. (jimb@redhat.com).
    Bugzilla bugs 85251, 85214.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.26
changelog:
  - Fix inferior function calls with void return on x86-64. Bugzilla bug 83197.
  - Fix for upstream PR/699.
  - Fix some problems with gdb-5.3post-thrtst-feb2003.patch.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.14
changelog:
  - New patch to fix disassembly on s390. Bugzilla bug 84286.
  - New patch for attach/ptrace fix. Bugzilla bug 84220.
  - Reenable tests for x86.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.11
changelog:
  - Add patch for mi threads tests.
  - Add patch for dwarf2 debug_ranges section.
  - Add patch for detach bug.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.10
changelog:
  - Add patch for testsuite auto answering internal error queries.
  - Add new TLS tests.
  - Add cleanup patches for thread tests.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.9
changelog:
  - Add new patch for thread support. Apply on all arches.
  - Do not apply old patches, but leave them around for now.
  - Add new patch for dwarf2 debug info reading.
  - Add new patch for dwarf2 cfi engine cleanup.
  - Add new patch for uiout problems.
  - Add new patch for s390 build.
  - Disable tests on all platforms but x86.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.8
changelog:
  - Move all the changelog entries to a single patch.
  - Add tests to the args patch.
  - Add new patch for until command fix (bugzilla Bug 19890).
  - s390 and s390x can be built with -Werror.
  - Run make check for s390 and s390x too.
  - Include an updated version of the thread nptl patch (still WIP).


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.6
changelog:
  - Add patches for NPTL support, to be applied on i386 only.
    (this is still WIP)
  - Split old misc patch in two parts.
  - Temporarily disable testsuite run on alpha.


author: Elliot Lee <sopwith@redhat.com> 0.20021129.4
changelog:
  - The define directive to rpm is significant even if the line it is 
    in happens to start with a '#' character. Fixed.


author: Elena Zannoni <ezannoni@redhat.com> 0.20021129.3
changelog:
  - Merge previous patches for warnings into a single one.
  - Add changelogs to patches.
  - Add, but don't use, a macro to avoid stripping.


author: Elena Zannoni <ezannoni@redhat.com>
changelog:
  - Add patch to allow debugging of executables with debug info stored
    in separate files.
  - Add patch for Makefile dependencies and disable warnings for
    building thread-db.c.
  - Re-enable building with -Werror for alpha, ia64, ppc.


author: Elena Zannoni <ezannoni@redhat.com>
changelog:
  - Don't pass to gdb an empty build warnings flag, or that will disable warnings
    completely. We want to build using gdb's standard warnings instead.


author: Elena Zannoni <ezannoni@redhat.com>
changelog:
  - x86_64 doesn't build with Werror yet.
  - Add patch for alpha.
  - Alpha doesn't build with -Werror either.
  - Add patch for ia64.
  - Add patch for ppc.
  - Drop ia64 from -Werror list.
  - Drop ppc from -Werror list.


author: Elena Zannoni <ezannoni@redhat.com>
changelog:
  - Add dejagnu to the build requirements.
  - Enable make check.
  - Add enable-gdb-build-warnings to the configure flags.


author: Elena Zannoni <ezannoni@redhat.com>
changelog:
  - Import new upstream sources.
  - Change version and release strings.
  - Upgrade patches.
  - Build gdb/gdbserver as well.
  - Define and use 'cvsdate'.
  - Do %setup specifying the source directory name. 
  - Don't cd up one dir before removing tcl and friends.
  - Change the configure command to allow for the new source tree name.
  - Ditto for the copy of NEWS.
  - Add some comments.


author: Elena Zannoni <ezannoni@redhat.com> 5.2.1-5
changelog:
  General revamp.
  - Add patch for gdb/doc/Makefile.in. Part of fix for bug 77615.
  - Add patch for mmalloc/Makefile.in. Part of fix for bug 77615.
  - Change string printed in version.in to <version>-<release>rh.
  - Move the deletion of dejagnu, expect, tcl to the prep section,
    from the build section.
  - Add build directory housekeeping to build section.
  - Use macros for configure parameters.
  - Do the build in a separate directory.
  - Prepare for testing, but not enable it yet.
  - Correctly copy the NEWS file to the top level directory, for the doc
    section to find it.
  - Cd to build directory before doing install.
  - Use makeinstall macro, w/o options.
  - Remove workaround for broken gdb info files. Part of fix for bug 77615.
  - Remove share/locale directory, it is in binutils.
  - Remove info/dir file.
  - Clarify meaning of post-install section.
  - Add gdbint info files to post-install, pre-uninstall and files sections.
    Part of fix for bugs 77615, 76423.
  - Add libmmalloc.a to package.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - New snapshot
  - Add ncurses-devel to buildprereq
  - Remove perl from buildprereq, as gdb changed the way 
    version strings are generated


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Add patch from kevinb@redhat.com to fix floating point + thread 
    problem (#24310)
  - remove old workarounds
  - new snapshot


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - new snapshot which should fix some more IA64 problems (#29151)
  - remove IA64 patch, it's now integrated


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - add IA64 and Alpha patches from Kevin Buettner <kevinb@redhat.com>
  - use perl instead of patch for fixing the version string


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Link with ncurses 5.x even though we're using kgcc.
    No need to drag in requirements on ncurses4 (Bug #24445)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - new CVS snapshot
  - disable the patches
  - don't use %configure, as it confuses the autoconf script
  - enable SPARC, disable Alpha


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %configure, %makeinstall, %{_infodir}, %{_mandir},
    and %{_tmppath}
  - the install scripts  for info are broken(they don't care about
    you specify in the installstep), work around that.
  - don't build for IA64


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - upgraded to 5.0 - dump all patches. Reapply later if needed.
  - added the NEWS file to the %doc files
  - don't delete files which doesn't get installed (readline, texinfo)
  - let build system handle stripping and gzipping
  - don't delete libmmalloc
  - apply patch from jakub@redhat.com to make it build on SPARC


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - fix reading registers from core on sparc.
  - hack around build problems on i386 with glibc 2.1.3 headers


author: Jim Kingdon
changelog:
  - List files to install in /usr/info specifically (so we don't pick up
  things like info.info from GDB snapshots).


author: Jim Kingdon
changelog:
  - Update GDB to 19991004 snapshot.  This eliminates the need for the
  sigtramp, sparc, xref, and threads patches.  Update sparcmin patch.


author: Jim Kingdon
changelog:
  - Remove H.J. Lu's patches (they had been commented out).
  - Add sigtramp patch (from gdb.cygnus.com) and threads patch (adapted
  from code fusion CD-ROM).


author: Jesse Keating <jkeating@redhat.com> - 4.0.2-16
changelog:
  - Don't use %makeinstall, instead make install.
  - Change DDESTDIR to DESTDIR to do the right thing.
  - Comment out utf patch as it is no longer necessary.
  - Add dist tag
  - Change PreReq to correct Requires(pre), Requires(post), Requires(preun) 
  - Don't use RPM_SOURCE_DIR, reference the source file directly
  - Do the compiling (make) in %build, not %install
  - Don't replace /etc/screenrc if the user has modified it
  - Ditto /etc/pam.d/screen
  - Change the buildroot to follow guidelines


author: Petr Rockai <prockai@redhat.com> - 4.0.2-15
changelog:
  - bump MAXSTR (string buffer size) to 4k (from 256 bytes), fixes
    status line issues with window list in status line and too many
    windows (and possibly other issues with long strings)


author: Petr Rockai <prockai@redhat.com> - 4.0.2-14
changelog:
  - put /usr/share/screen into the package (so the package owns the
    directory as well, not only the files below); fixes BR 192852


author: Petr Rockai <prockai@redhat.com> - 4.0.2-11
changelog:
  - change the default lockscreen shortcut to ^aX to make
    it harder to hit by accident, as per BR 157821


author: Petr Rockai <prockai@redhat.com> - 4.0.2-6
changelog:
  - fix BR 136234 by carrying out the suggested change in /etc/screenrc
  - drop screen-4.0.2-logname.patch (merged into screen-4.0.2-screenrc.patch)
  - grant wish 130674 by adding a (commented out) caption statement to default
    screenrc


author: Lon Hohberger <lhh@redhat.com> 4.0.1-1
changelog:
  - Import of 4.0.1 from upstream.
  - Removed screen-homedir hack introduced in 3.9.15-8.  (I
  was unable to reproduce the behavior described in #98320,
  and thus, the patch isn't necessary.)
  - Fix for buffer overflow from Timo Strainen (patch 7).
  - Fix for #111084 - we now require texinfo to build.
  - Comment out lines in screenrc causing screen to complain
  at startup.


author: Lon Hohberger <lhh@redhat.com> 3.9.15-8
changelog:
  - Change screen's behavior to do the following: Attempt to use
  ~/.screen as the screen directory.  Failing that (ie, on files
  systems without Unix sockets support), try using /tmp/screen-<USER>.
  This prevents a user from creating /tmp/screens (which inherits
  the sticky bit from /tmp, preventing other users from using screen),
  as well as *tries* to be more secure.


author: Lon Hohberger <lhh@redhat.com> 3.9.15-6
changelog:
  - Disable system-wide read/write dir in /tmp; use user's ~/.screen
  directory for screen sessions. (#98320)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 3.9.11
  - patch0/patch4 is not necessary anymore
  - do not compress man-pages/info-files in spec file
  - use configure to set telnet/screenrc instead of sed
  - add a hack to correctly install the new screenencodings
  - try to build up a better global /etc/screenrc instead of
    /etc/skel/.screenrc


author: Crutcher Dunnavant <crutcher@redhat.com> 3.9.9-3
changelog:
  - fixed screenrc path sed command; #50046
  - added ncurses-devel build dep; #49692
  - fix typo in specfile that broke screenrc, #49535


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Patched the documentation to change the 'C-a C-\' to 'C-a \',
  - which is what is the real behaviour. this fixes bug #16103


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Stuck an entry into the default screenrc file that forces
  - '^?' (backspace) to send '^H'.
  - Its an ugly fix for a termcap inheritance problem,
  - but it works, if anyone REALLY needs '^?' they can change it,
  - and I think we anger less people with this than the way it 
  - currently behaves. (Read: vi and emacs work now)
  - POST NOTE (Aug 15): emacs is NOT happy with ^H, BUT screen thinks
  - that this is what backspace is supposed to do, so we don't change it.


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - got a patch from rzm@icm.edu.pl to fix bug #10353
  - which caused screen to crash when copying to a file buffer


author: Tom "spot" Callaway <tcallawa@redhat.com> - 0.9-2
changelog:
  - fix BR
  - remove unnecessary Requires
  - use version-release in changelog entries
  - fix directory ownership
  - use python_sitearch
  - make python "scripts" executable


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> - 2.0-0.10-17
changelog:
  - rebuild
  - removed 64 bit hacks
  - removed unused BRs
  - Added back the libdir patch and added autoreconf


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> - 2.0-0.10-14
changelog:
  - reverted 64 bit patches
  - removed arch from configure 
  - added libdir=monodir to the configure line


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> 2.0-0.10.8
changelog:
  - Added libdir fix (courtest of John Mahowald)
  - Added devel
  - Ensured buildroot consistency
  - Added doc to the files instead of manually adding them in the install


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> 2.0-0.10.7
changelog:
  - quite a number of changes to ensure the correct building under all archs
  - imported parts of the mono build spec from the FC5 package
  - built and tested under mock - must get more memory into the test box


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> 2.0-0.10-5
changelog:
  - removed the static libdir
  - removed file which caused conflict with gtksourceview package
  - removed %{_libdir}/monodoc/*


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> 2.0-0.10-4
changelog:
  - Added Requires mono-core and gtksourceview
  - libdir now usr-lib irrespective of architecture
  - Quite a lot of spec file changes


author: Axel Thimm <Axel.Thimm@ATrpms.net> - 5.89-3
changelog:
  - Apply comments from review #191040c3 (by Ville).
    - Fix summary and description
    - Config files are arch-independent, so we should become noarch
    - Create versioned dependency on apt (make sure it's repo-md capable)
      This creates a circular dependency which should not impose any
      issues.


author: Karsten Hopp <karsten@redhat.com> 2.4.32-2
changelog:
  - add disttag
  - remove trailing dot from summary
  - fix buildroot
  - -devel package requires same libattr version
  - change prereq to Requires(post)
  - escape macro in changelog
  - replace absolute link with relative link (libattr.so)
  - use %doc macro


author: Stephen C. Tweedie <sct@redhat.com> 2.4.1-3
changelog:
  - Add /usr/include/attr to files manifest
  - Fix location of doc files, add main doc dir to files manifest


author: Michael K. Johnson <johnsonm@redhat.com> 2.0.8-1
changelog:
  - Initial Red Hat package
    Made as few changes as possible relative to upstream packaging to
    make it easier to maintain long-term.  This means that some of
    the techniques used here are definitely not standard Red Hat
    techniques.  If you are looking for an example package to fit
    into Red Hat Linux transparently, this would not be the one to
    pick.
  - attr-devel -> libattr-devel


author: Ville Skyttä <ville.skytta at iki.fi> - 0.7.3-2
changelog:
  - Reference HTML 4.01 DTDs directly instead of making all system catalogs
    available - something in the catalogs breaks at least XHTML 1.0 (#213131).
  - Use system XHTML 1.0 DTDs.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.7.3-1
changelog:
  - 0.7.3, feedback and undebian patches applied upstream.
  - Use "W3C License" as the License tag to appease rpmlint.


author: Ville Skyttä <ville.skytta at iki.fi> - 0.7.2-3
changelog:
  - Patch to allow use of system catalogs and DTDs, use system html401-dtds.
  - Make config files noreplace again.
  - Drop no longer needed Obsoletes.
  - Allow FTP by default.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.6.2-1w3c
changelog:
  - Update to 0.6.2.
  - Rename to w3c-markup-validator.
  - Install our catalogs if %{_bindir}/install-catalog is available.
  - Add Epoch: 0.


author: Joe Orton <jorton@redhat.com> 1.2.8-6
changelog:
  - merge review (#225253): drop .a archive; drop use of CC/CXX,
    use BuildRequires; drop old Conflicts; URL reference for Source


author: Joe Orton <jorton@redhat.com> 1.2.2-2
changelog:
  - avoid linking against -lrt
  - don't print -L${libdir} in --libs output
  - don't export -lcrypt/-luuid in .la file


author: Joe Orton <jorton@redhat.com> 0.9.6-6
changelog:
  - don't override CFLAGS at build time
  - allow setting TCP_NODELAY and TCP_CORK concurrently
  - use _exit() not exit() in child if exec*() fails (upstream #30913)


author: Joe Orton <jorton@redhat.com> 0.9.6-5
changelog:
  - add from 0.9.x branch:
   * fix for apr_{uid,gid}_* error handling (r239592)
   * fix for apr_file_ write flushing (r267192)
  - add backport for use of readdir64_r (r265032, r265681, r265684)


author: Joe Orton <jorton@redhat.com> 0.9.4-22
changelog:
  - backport fixes from HEAD:
   * correct implementation of nested mutexes
   * support for POSIX semaphores on LP64 platforms


author: Joe Orton <jorton@redhat.com> 0.9.4-15
changelog:
  - add support for setuid/setgid/sticky bits (André Malo)
  - add apr_threadattr_{guardsize,stacksize}_set() (latter by Jeff Trawick)


author: Joe Orton <jorton@redhat.com> 0.9.4-14
changelog:
  - enable posixsem and process-shared pthread mutex support, but
    ensure that sysvsem remains the default mechanism


author: Joe Orton <jorton@redhat.com> 0.9.4-13
changelog:
  - entirely remove 2Gb file size limit from apr_file_copy();
    fixes "svnadmin hotcopy" on repos with >2Gb strings table
  - work around getnameinfo bugs with v4-mapped addresses
  - fix apr_time_exp_get() for dates in 2038 (Philip Martin)


author: Joe Orton <jorton@redhat.com> 0.9.4-10
changelog:
  - fix configure check for mmap of /dev/zero
  - just put -D_GNU_SOURCE in CPPFLAGS not _{BSD,SVID,XOPEN}_SOURCE


author: Joe Orton <jorton@redhat.com> 0.9.4-6
changelog:
  - define apr_off_t as int/long/... to prevent it changing
    with _FILE_OFFSET_BITS on 32-bit platforms


author: Joe Orton <jorton@redhat.com> 0.9.3-7
changelog:
  - use AI_ADDRCONFIG in getaddrinfo() support (#73350)
  - include a working libtool script rather than relying on
   /usr/bin/libtool (#97695)


author: Matthew Truch <matt at truch.net> - 0.51-2
changelog:
  - Require hpic for hpic-devel.
  - Don't package libhpic.la
  - Improve description and summary.
  - Clean up specfile syntax.
  - Direct configure to cfitsio headers.
  - Put libhpic.so in hpic-devel.


author: Bernard Johnson <bjohnson@symetrix.com> 1.1.11-1
changelog:
  - version 1.1.11
  - remove option parser patch (upstream)
  - remove init file patch (upstream)
  - include INSTALL file now that it represents correct information
  - fix eol problems on some of the new docs
  - remove zero byte log file


author: Bernard Johnson <bjohnson@symetrix.com> 1.1.10-2
changelog:
  - consistent start/stop of daemon in scriptlets
  - move requirements created by scripts to daemon package that requires them
  - don't include the INSTALL file - it's information can be found elsewhere
  - %{python_sitelib}/TMDA/pythonlib/email/mime files were improperly packaged
  - dependency on initscripts because of use of daemon function
  - note regarding tmda inclusion of pythonlib/email
  - change tofmipd user to / home directory


author: Bernard Johnson <bjohnson@symetrix.com> 1.1.10-1
changelog:
  - version 1.1.10
  - substitute RPM_BUILD_ROOT for %{buildroot} macro
  - preserve file timestamps
  - change tofmipd user to /etc home directory
  - switch to fedora-usermgmt user management
  - add Require(post,preun) of /sbin/chkconfig


author: Karel Zak <kzak@redhat.com> 3.1.5-15
changelog:
  - fix #225777 - clean up spec file according to Fedora Merge Review
    suggestions (thanks to Dan Horak and Patrice Dumas)


author: Karel Zak <kzak@redhat.com> 3.1.5-9
changelog:
  - fix numeric conversion problem (patch by Aharon Robbins)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2006-07/msg00004.html


author: Karel Zak <kzak@redhat.com> 3.1.5-5
changelog:
  - fix "gawk -v BINMODE=1" (patch by Aharon Robbins)
  - fix conversion from large number to string (patch by Aharon Robbins)


author: Karel Zak <kzak@redhat.com> 3.1.5-4
changelog:
  - fix off-by-one error in assignment of sentinel value at 
    end of FIELDWIDTHS array. (patch by Aharon Robbins)


author: Karel Zak <kzak@redhat.com> 3.1.4-2
changelog:
  - add dfacache.patch for fix LC_ALL=de_DE.UTF-8 ./gawk '/^[ \t]/ { print }',
    (by Aharon Robbins), #135210, #131498
  - add flonum.patch for "improved" handling of non-numeric constants,
    second version of patch (by Aharon Robbins)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-10/msg00046.html
  - add nextc.patch (by Andreas Schwab)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-09/msg00093.html
  - add uplow.patch for fix the wide char handling (by Stepan Kasal)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-10/msg00099.html


author: Elliot Lee <sopwith@redhat.com> 3.1.1-7
changelog:
  - Add gawk-3.1.1-ngroups.patch, because NGROUPS_MAX comes from 
  sys/param.h, and awk.h changes behaviour depending on whether NGROUPS_MAX 
  is defined or not. (For ppc64)


author: Trond Eivind Glomsrod <teg@redhat.com>
changelog:
  - /usr/bin/gawk can't point at gawk - infinite symlink
  - /usr/bin/awk can't point at gawk - infinite symlink


author: Matthew Barnes <mbarnes@redhat.com> - 1.0.7-4.fc7
changelog:
  - Clean up spec file, remove unused patches.
  - Revise multilib patch so that we no longer have to run the autotools
    before building (RH bug #224160).


author: Matthew Barnes <mbarnes@redhat.com> - 1.0.7-1
changelog:
  - Update to 1.0.7
  - Disable pspell compatibility layer (added 3 years ago).
  - Update gnome-spell-1.0.4-multilib.patch and rename it to version 1.0.7.


author: David Malcolm <dmalcolm@redhat.com> - 1.0.5-8
changelog:
  - added explicit Requires on libgnomeui, libbonoboui, libglade2 and BuildRequires on the corresponding devel packages
  - removed erroneous BuildRequires on libgal2-devel and linc-devel (#140478)


author: Jeremy Katz <katzj@redhat.com> 1.0.3-3
changelog:
  - new approach for handling compatibility with old pspell, fixes crashes with 
    the old patch and makes it a less manual process


author: Wart <wart@kobold.org> 2.17-7
changelog:
  - Remove dm for Fedora
  - Turn off setgid bit for cfscores
  - Limit setgid code segments in hack
  - Limit setgid code segments in phantasia


author: Wart <wart@kobold.org> 2.17-4
changelog:
  - Added dist tag to release number
  - Added patch to limit potential security holes in tetris-bsd
  - Added patch set from Debian's package, which includes a security patch
    for CVE-2006-1744
  - Rename monop to mpoly to avoid conflict with the mono-devel package.


author: Wart <wart@kobold.org> 2.17-3
changelog:
  - Updated setresgid patch to disable potential security holes from
    user-specified scoreboard files.
  - Move hack save games to $HOME, but can be moved using HACKDIR or the
    '-d' command line option.


author: Wart <wart@kobold.org> 2.17-2
changelog:
  - Added patch to change use of setregid to setresgid almost everywhere.
  - Added missing BuildRequires


author: Wart <wart@kobold.org> 2.17-1
changelog:
  - Updated to 2.17 with new configuration system
  - Updated patches for 2.17
  - Updated spec file for Fedora Extras


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed getline() redefinition, it is included in stdio.h now, so 
    getline had to be renamed. Also, -D_GNU_SOURCE
  - fix bug 27850, where certain games need to be setgid games, and 
    their scorefiles etc. need to belong to group games


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_tmppath}
  - don't use internal rpm programs 
  - kill countmail, no longer require frm from elm


author: Tim Powers <timp@redhat.com>
changelog:
  - updated source to 2.8
  - fixed problem with ospeed being defined in the source instead of including
  	termcap.h (new ospeed patch)
  - using files list in %files section instead of entering
  	_every_single_filename_.


author: Tim Powers <timp@redhat.com>
changelog:
  - updated source to 2.7
  - updated patches to fix bugs and the braindead configure script, 
    dropped a few of the older patches that made it into this release
  - replaced -make install with make install-strip
  - built for 6.1


author: Anthony Green <green@redhat.com> 0.9.1-3
changelog:
  - Move .pc file from examples to devel.
  - Delete the .la files instead of %exclude-ing them.
  - Add some dependencies to the -devel package.
  - dssi-devel package no longer depends on dssi.
  - Move COPYING to devel package.


author: Anthony Green <green@redhat.com> 0.9.1-2
changelog:
  - Clean up BuildRequires.
  - Add "%dir" to dssi lib dir in $files.
  - Move plugin examples to a new -examples package.


author: Fernando Lopez-Lezcano <nando@ccrma.stanford.edu> 0.4-1
changelog:
  - initial build.
  - include fluidsynth sources, dssi needs them for the fluidsynth-dssi
    example (it relies on more than the standard fluidsynth API)


author: Steven Pritchard <steve@kspei.com> 0.1.1-1
changelog:
  - Specfile autogenerated by cpanspec 1.68.
  - BR libvirt-devel and pkgconfig.
  - Fix License.
  - Drop non-doc autobuild.sh and add the examples directory.
  - Don't try to build the included perl-Sys-Virt.spec.


author: Mike A. Harris <mharris@redhat.com> 3.05-12
changelog:
  - Update Usage: line in initscript to not hardcode the script name,
    but use variable expansion instead, so that translators do not try and
    translate it (#81857)


author: Mike A. Harris <mharris@redhat.com> 3.05-9
changelog:
  - Added status target to initscript to quell rpmlint warning
  - Fixed bug in initscript case statement missing ;;
  - Closed tracking reminder bug (#75333)


author: Mike A. Harris <mharris@redhat.com> 3.05-8
changelog:
  - Made package LSB/FHS friendlier by doing the following
  - Added post/preun/postun scripts for properly handling the initscript
  - Added $ to strings in initscript for i18n
  - Added condrestart target to initscript
  - Added subsystem locking to initscript
  - Added prereq deps to specfile


author: Mike A. Harris <mharris@redhat.com> 3.05-6
changelog:
  - Changed defattr(644, root, root, 755) to defattr(-, root, root, 755) because
    it was just ohhh so wrong.  (#70762)


author: Mike A. Harris <mharris@redhat.com> 3.05-1
changelog:
  - Updated isicom to version 3.05
  - Fixed up Makefile patch
  - Added initscript for isicom from bug (#54343)


author: Linus Walleij <triad@df.lth.se> 0.8-1
changelog:
  - New upstream version including patch.
  - The icon is an an even weirder place now!
  - Have to run som autotools on this one to get it working.


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.04-2
changelog:
  - Log::Dispatch::FileRotate is no longer excluded due to licensing
    problems (the package now includes copyright information).


author: Roozbeh Pournader <roozbeh@farsiweb.info> - 1.1.3-2
changelog:
  - Remove %{enchant_dir} macro
  - Add %dir for architecture-specific directory
  - Add "Provides:" for PyEnchant
  - Remove "Requires:" on enchant (Brian Pepple)


author: <pertusus@free.fr> 1.91-7
changelog:
  - remove openssh from BuildRequires (Dmitry)
  - remove pam from Requires, it is picked up automatically


author: <pertusus@free.fr> 1.91-6
changelog:
  - new summary from me and Dmirty
  - use Dmitry modified patch1 to let user see the informations in 
    /var/run/pam_ssh/ (modified at my request)
  - document the agent environment information files location in
    the man page


author: Dmitry Butskoy <Dmitry@Butskoy.name> 1.91-3
changelog:
  - Allow standalone session module (patch0)
  - Move runtime state files from ~/.ssh/agent-<hostname>* to
    /var/run/pam_ssh/<user>* . This is an easy way to provide properly
    cleanups after system crash. (patch1)


author: Steven Pritchard <steve@kspei.com> 1.82-1
changelog:
  - Update to 1.82.
  - Use fixperms macro instead of our own chmod incantation.
  - Minor spec cleanup to more closely resemble current cpanspec output.


author: Steven Pritchard <steve@kspei.com> 1.6-2
changelog:
  - Add patch for mod_perl2 compatibility from Chris Grau (#167753, comment #3).
  - Re-enable "make test".


author: Matthias Saou <http://freshrpms.net/> 0.4.1-2
changelog:
  - Removed explicit acme dependency as GNOME 2.6 has the key mapping built in.
  - Removed explicit stripping, that goes into the debuginfo package.


author: Dominik Mierzejewski <rpm@greysector.net> 0-0.3.20070301
changelog:
  - updated to 20070301 "BlameBaltar"
  - added missing quine.crm to testsuite
  - no more crashes on x86_64, removed ExcludeArch, fixes #202893


author: Dominik Mierzejewski <rpm@greysector.net> 0-0.1.20060704
changelog:
  - FE-compliant versioning
  - emacs subpackage should require emacs-el
  - simplified file list
  - added %check
  - small patch to make 'make megatest' work from current dir
  - ExcludeArch: x86_64 until 64bit tre is fixed


author: Dominik Mierzejewski <rpm@greysector.net>
changelog:
  - 20060704a release
  - added -emacs package with crm mode for emacs
  - fixed parallel make build
  - use dist tag
  - shut up rpmlint


author: Bill Yerazunis <wsy@merl.com>
changelog:
  - removed -RCx stuff, now version contains it.
  - updated for version 20031215-RC12
  - License is GPL, not Artistic, so I corrected that.


author: Kevin Fenzi <kevin-crm114@tummy.com>
changelog:
  - Converted line endings from dos format to unix. 
  - Changed BuildPreReq to be 'tre-devel' 
  - Fixed install to install into rpm build root. 
  - tested on redhat 9 with latest tre.


author: Nico Kadel-Garcia <nkadel@merl.com>
changelog:
  - Created RedHat compatible .spec file
  - Added libtre dependency to avoid building second package
  - Hard-coded "INSTALL_DIR" in build/install setups


author: Michael A. Peters <mpeters@mac.com> - 1.5.8-6
changelog:
  - rebuild in devel branch with new compiler suite
  - remove specific release from devel requires of main package
  - do not build with %{_smp_mflags}


author: Michael A. Peters <mpeters@mac.com> - 1.5.8-4
changelog:
  - Added Arabic support files from Developer mailing list (they have
  - been added to the upstream SVN version)


author: Radek Vokál <rvokal@redhat.com> 0.99.5-1
changelog:
  - multiple security issues fixed (#227140)
  - CVE-2007-0459 - The TCP dissector could hang or crash while reassembling HTTP packets
  - CVE-2007-0459 - The HTTP dissector could crash.
  - CVE-2007-0457 - On some systems, the IEEE 802.11 dissector could crash.
  - CVE-2007-0456 - On some systems, the LLT dissector could crash.


author: Radek Vokál <rvokal@redhat.com> 0.99.3-1
changelog:
  - upgrade to 0.99.3
  - Wireshark 0.99.3 fixes the following vulnerabilities:
  - the SCSI dissector could crash. Versions affected: CVE-2006-4330
  - the IPsec ESP preference parser was susceptible to off-by-one errors. CVE-2006-4331
  - a malformed packet could make the Q.2931 dissector use up available memory. CVE-2006-4333


author: Daniel Veillard <veillard@redhat.com> 2.6.27-1
changelog:
  - upstream release 2.6.27 see http://xmlsoft.org/news.html
  - very large amount of bug fixes reported upstream


author: Callum Lerwick <seg@haxxed.com> - 1.2.3-2
changelog:
  - Removed which from Buildrequires, mock needing it is confirmed to be a bug.
  - Use find_lang macro.
  - Look for ladspa plugins in the correct place on x86_64.
  - Build against liblo, jack, dssi, lirc.
  - Salvage the upstream desktop file, rather than using our own.


author: Michael Schwendt <mschwendt[AT]users.sf.net>
changelog:
  - 2.5.0-4
  - Fix bad printf string (#149613).
  - Fix default cnf file location in readme and man page.
  - Don't strip.


author: Matt Wringe <mwringe at redhat.com> 3.2.0-9jpp.1
changelog:
  - Merge with upstream version:
   - Add missing javadoc post and unpost
   - Add missing javadoc requires


author: Phil Knirsch <pknirsch@redhat.com> 4.0.0-9
changelog:
  - Fixed 64bit problem with x11 display (#167508)
  - Added missing file ownage of /usr/share/gnuplot (#169333)


author: Phil Knirsch <pknirsch@redhat.com> 4.0.0-8
changelog:
  - Fixed missing Requires: emacs for the gnuplot-emacs package
  - Added a gnuplot-init.el file for startup (#151122)


author: Bill Nottingham <notting@redhat.com> 3.7.3-1
changelog:
  - update to 3.7.3
  - don't bother patching it to do jpegs with gd instead of gifs,
    as we haven't been building it with gd support anyway


author: Chris Weyl <cweyl@alumni.drew.edu> 1.06-1
changelog:
  - add explicit provides: perl(Event) = version...  wasn't being picked up
    automagically for some reason
  - Tweaked summary line
  - Bumped release


author: Steven Pritchard <steve@kspei.com> 1.4.1-7
changelog:
  - Really fix the cmod models problem (#203525).  (Thanks to Hans de Goede.)
  - Hopefully really handle the gconf schema properly.


author: Nick Urbanik <nicku@nicku.org> 1.4.1-3
changelog:
  - Test errorMessage to see if it is null before copying it!
    This change suggested by Hank Ramsey and added to
    celestia-1.4.1-lua51-resume.patch
  - Added developers documentation
  - Incorporate patch suggested by Hank Ramsey to eliminate segfault
    when loading .celx files: celestia-1.4.1-lua51-resume.patch
  - Update to add lua
  - Incorporate
    http://www.archlinux.org/pipermail/tur-users/attachments/20060603/7dea8cd1/celestia-lua51.bin


author: Steven Pritchard <steve@kspei.com> 1.4.1-1
changelog:
  - Update to 1.4.1
  - Use "pkg-config --libs gtkglext-x11-1.0 libgnomeui-2.0" instead of
    "pkg-config --libs gtk+-2.0"


author: Steven Pritchard <steve@kspei.com> 1.4.0-1
changelog:
  - Update to 1.4.0
  - Remove celestia-1.3.2-compile.patch (seems to be applied upstream)
  - Use find_lang magic
  - Remove duplicate desktop file
  - Fix Help -> Controls


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:1.3.2-0.fdr.1
changelog:
  - Updated to 1.3.2.
  - Switched to using GNOME frontend.
  - Updated desktop file.
  - Minor editing of description text.
  - Converted spec file to UTF-8.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:1.3.0-0.fdr.3
changelog:
  - Added Encoding=UTF-8 to desktop file (bug 740).
  - Added work-around for linking problems on FC1 (bug 740).
  - Updated {minor,numbered}moons.asc (bug 740).


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:1.3.0-0.fdr.2
changelog:
  - Replaced source tarball with proper release tarball.
  - Added BuildRequires gnome-libs-devel for gnomeConf.sh.
  - Build with freeglut instead of glut.


author: Matthias Saou <matthias.saou@est.une.marmotte.net>
changelog:
  - Update to 1.2.5.
  - Included "Minor Moons of the Giant Planets" extra file.
  - New icon from the KDE part of the source.


author: Caolan McNamara <caolanm@redhat.com> 0.2.8.4-1
changelog:
  - get patches merged upstream
  - drop integrated libwmf-0.2.8.3-warnings.patch
  - drop integrated libwmf-0.2.8.3-noextras.patch
  - drop integrated libwmf-0.2.8.3-rh154813.patch


author: Joe Orton <jorton@redhat.com> 0.20.5-2
changelog:
  - update to 0.20.5; many bug fixes, minor security-related
   fixes, much improved SSL support, a few new features.


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp>
changelog:
  - fix BuildRequires to be rebuilt with mock (#191762)
  - fix spec file scripts.
  - update source files (use tar.gz with the date 20041025 and 2.1b1.6 Japanese patch)


author: Jindrich Novy <jnovy@redhat.com> 2002.2.1-4
changelog:
  - remove '\n' causing that pstoimg generates gray images
    (#161186, #127010), solution from Julius Smith


author: Jindrich Novy <jnovy@redhat.com> 2002.2.1-1
changelog:
  - create backups for patches
  - update Source1
  - BuildArchitectures -> BuildArch
  - remove direct RPM_BUILD_ROOT links from l2hconf.pm
  - fix bad interpreter name path in pstoimg, texexpand
  - define --with-texpath explicitely
  - remove Dos.pm, Mac.pm, OS2.pm, Win32.pm
  - don't require the font directory to be ended with PATH/fonts


author: Haïkel Guémar <karlthered@gmail.com> - 1.4.2.cvs20060817-4
changelog:
  - fixed shared lib permission, moved m4 macros into /usr/include, 
  added libtool as BR, provides a script to generate cvs snapshot.


author: Jeff Sheltren <sheltren@cs.ucsb.edu> 1.99.1-1
changelog:
  - Update to newer source (see URL)
  - Update patches as necessary, separate cflags patch as it was only applied if applying offensive patches
  - New source has recode-devel buildreq
  - Remove debian fortunes which are included in new source


author: Michael Schwendt <mschwendt[AT]users.sf.net> 1.0-25
changelog:
  - Recreate .dat files at build-time to fix x86_64 fedora.us bug #2279.
  - Use %CookieDir everywhere.
  - Bump release to 25, drop Epoch.


author: Michel Alexandre Salim <salimma[AT]users.sourceforge.net> 1.0-24.fdr.3
changelog:
  - Added Tao Te Ching (fortune-tao), O'Reilly (osfortune) and H2G2 (fortune-hitchhiker) cookies
  - Fixed BuildRoot
  - Added Epoch
  - Reverted to .tar.gz for main source, .tar.bz2 not available upstream


author: Michel Alexandre Salim <salimma[AT]users.sourceforge.net> 1.0-24.fdr.2
changelog:
  - Modified installation paths to conform with Red Hat-packaged games, i.e. binaries in /usr and data files under /usr/games


author: Mike A. Harris <mharris@redhat.com> 1.0-24
changelog:
  - Removed -o option from fortune, the manpage and --help message, as
    we do not provide or support the offensive fortunes for obvious
    reasons.  (#54713)


author: Daniel Reed <djr@redhat.com> 1.6.5-4
changelog:
  - comment out call to autoconf, use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=x86_64-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info instead of ./configure


author: Mike A. Harris <mharris@redhat.com> 1.0.0-3
changelog:
  - Added "Requires: xorg-x11-proto-devel" for xtrap.pc
  - Replace "makeinstall" with "make install DESTDIR=..."
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXTrap to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Nalin Dahyabhai <nalin@redhat.com> 1.8.0-18.1
changelog:
  - run make with libdir overridden so that it has the value passed to configure
    instead of $(prefix)/lib


author: Adam Jackson <ajax@redhat.com> 1.2.0-3
changelog:
  - BuildRequire on the randrproto virtual instead of a magic x-x-p-d version.
  - Fix -devel package to require sufficiently new randrproto.


author: Mike A. Harris <mharris@redhat.com> 1.1.1-2
changelog:
  - Added "BuildRequires: pkgconfig" for (#193428)
  - Replace "makeinstall" with "make install DESTDIR=..." for (#192724)
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.1.0.1-1
changelog:
  - Updated libXrandr to version 1.1.0.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXrandr to version 0.99.2 from X11R7 RC2
  - Changed 'Conflicts: XFree86-devel, xorg-x11-devel' to 'Obsoletes'
  - Changed 'Conflicts: XFree86-libs, xorg-x11-libs' to 'Obsoletes'


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated libXrandr to version 0.99.1 from X11R7 RC1
  - Updated file manifest to find manpages in "man3x"


author: Wart <wart at kobold.org> - 0.8.0-2
changelog:
  - Updated patch 1 to add $RPM_OPT_FLAGS to the compiler flags
  - Add --enable-threads to match the configuration of the core Tcl package


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Upgrade to 1.04, editied the pbm2ppa patch to add <string.h>
  - to pbmtpg.c, which uses strmp, edited the redhat patch to
  - apply cleanly.


author: Anthony Green <green@redhat.com> 2.5.0.0-8
changelog:
  - Force bcprov-1.33.jar onto the CLASSPATH in azureus.script so it
    will run on non-gcj java alternatives.


author: Anthony Green <green@redhat.com> - 2.4.0.3-0.20060702cvs_2
changelog:
  - Updated sources.
  - Build against swt 3.2.  Update startup script.  Remove swt 3.1.1 patches.
  - Build against bouncycastle 1.33 package.  Add the following patches to work 
    with bouncycastle 1.33 out of the box: 
    azureus-SecureMessageServiceClientHelper-bcprov.patch,
    azureus-UDPConnectionSet-bcprov.patch, azureus-CryptoHandlerECC-bcprov.patch, 
    azureus-CryptoSTSEngineImpl-bcprov.patch
  - Build with -O0 to avoid gcc bugzilla 19505.


author: Anthony Green <green@redhat.com> - 2.4.0.3-0.20060529cvs_1
changelog:
  - Updated sources.
  - Re-enable close button on tabs in nativetabs patch.
  - Use proper ChangeLog.txt file.


author: Anthony Green <green@redhat.com> - 2.4.0.3-0.20060328cvs_5
changelog:
  - Two patches from Stephan Michels: nativetabs (for native GTK+ tabs), and 
  an updated azureus-themed.patch to work around GCC PR 27271.


author: Anthony Green <green@redhat.com> - 2.4.0.3-0.20060328cvs_2
changelog:
  - Set LD_LIBRARY_PATH for Sun java alternative.  Bugzilla #186152.
  - Remove pushd/popd noise from startup script.


author: Anthony Green <green@redhat.com> - 2.4.0.0-0.20060207cvs
changelog:
  - Update cvs sources.  Boost version number.
  - Move all jar files to /usr/share/azureus.
  - Add azplugins and bdcc.
  - Remove update and restart menu items.
  - Disable all updating.


author: Anthony Green <green@redhat.com> - 2.3.0.7-0
changelog:
  - Move to 2.3.0.7 snapshot (or will it be 2.4.0.0?).
  - Many related changes.
  - Remove ability to install plugins.


author: Anthony Green <green@redhat.com> - 2.3.0.6-19
changelog:
  - Theme CoolBar icons with azureus-themed.patch.
  - Add libgtk-java and glib-java dependencies to spec file.
  - Add gtk2.8 and glib0.2 to azureus.script.
  - Add missing semi-colon to Azureus.desktop.


author: Anthony Green <green@redhat.com> - 2.3.0.6-10
changelog:
  - Fix post and postun desktop integration.
  - Add MimeType to .desktop file.
  - Add comment about SOURCE0.
  - Install files with install, not cp.
  - Fix permissions on doc files.
  - Add BuildRequires xml-commons-apis.


author: Anthony Green <green@redhat.com> - 2.3.0.6-9
changelog:
  - Require libgcj with the latest fixes for running Azureus.
  - Be explicit about .png files in %files.


author: Anthony Green <green@redhat.com> - 2.3.0.6-8
changelog:
  - Remove bouncycastle from build-classpath in startup script.
  - Remove exclusive arch.
  - Remove classpath from manifest.
  - Add License.txt and ChangeLog.txt.


author: Anthony Green <green@redhat.com> - 2.3.0.6-4
changelog:
  - Remove bouncycastle crypto from zipball.
  - Add bouncycastle build- and runtime dependencies.
  - Desktop integration work.


author: Matthew Barnes <mbarnes@redhat.com> - 0.3.14-7
changelog:
  - Clean up spec file, package .bz2 file instead of .gz.
  - Make intltool a BuildRequires instead of a Requires (RH bug #203606).


author: Havoc Pennington <hp@redhat.com> 0.3.11-6
changelog:
  - remove the warning on invalid OMF files, it's always just some
    broken translation and happens with every release


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.9-1
changelog:
  - make relations optional to comply with the online copy of the OMF 1.0 spec
    at http://www.ibiblio.org/osrt/omf/omf_elements (SF #568355)
  - 0.3.9


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.3.8
  - no .la files
  - add some missing stuff to file list
  - divert output of rebuilddb to scrollkeeper.log


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild in new environment
  - ignore errors on removal of share/scrollkeeper/Templates in pre, #59494


author: Alex Larsson <alexl@redhat.com> 0.3.4-2
changelog:
  - Moved /usr/lib/rpm/redhat/find-lang.sh /var/tmp/scrollkeeper-0.3.14-11.fc7-root-brewbuilder to %install
  - Updated docbook dependency to docbook-dtds


author: Alex Larsson <alexl@redhat.com> 0.3.4-2
changelog:
  - Updated to 0.3.4 from upstream. Updated parts of
  - the specfile from the current upstream version.


author: Dan Mueth <dan@eazel.com>
changelog:
  - Added %postun to remove $datadir/scrollkeeper/templates
    to compensate for breakage in upgrade from 0.1.1 to 0.1.2


author: Dan Mueth <dan@eazel.com>
changelog:
  - Added cleaner symbolic link section suggested by Karl 
    Eichwalder <keichwa@users.sourceforge.net>
  - Have it blow away the database dir on first install, just
    in case an old tarball version had been installed
  - Fixing the Source0 line at the top


author: Mike McGrath <imlinux@gmail.com> 2.4-2
changelog:
  - Added proper SMP build flags
  - Added .fc7 tag
  - Added reload to nrpe script
  - Updated to 2.4, changes include: 
  - Added option to allow week random seed (Gerhard Lausser)
  - Added optional command line prefix (Sean Finney)
  - Added ability to reload config file with SIGHUP
  - Fixed bug with location of dh.h include file
  - Fixed bug with disconnect message in debug mode


author: Andreas Kasenides ank<@>cs.ucy.ac.cy
changelog:
  - fixed nrpe.cfg relocation to sample-config
  - replaced Copyright label with License
  - added --enable-command-args to enable remote arg passing (if desired can be disabled by commenting out)


author: James 'Showkilr' Peterson <showkilr@showkilr.com>
changelog:
  - Removed the lines which removed the nagios user and group from the system
  - changed the patch release version from 3 to 1


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.6.5-5
changelog:
  - Add missing BRs: libGLU-devel freetype-devel libXt-devel. To Fix resp
    building of clanGL, clanTTF and X detection on FC-5.


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.6.5-3
changelog:
  - Mark asm files as NOT needing execstack, making us OK with new default
    SELinux targeted policy settings.


author: Bruno Postle <bruno@postle.net> 0.6.1-5
changelog:
  - add shared-mime-info, desktop-file-utils dependencies
  - use desktop-file-install for .desktop file


author: Bruno Postle <bruno@postle.net>
changelog:
  - 0.6 CVS snapshot + gcc 4.1 hack.
  - batch processing for fulla.
  - requires latest pano12 > 2.8.0 for direct access to optimiser


author: Bruno Postle <bruno@postle.net>
changelog:
  - rebuild on different machine due to '/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.6' not found error.


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from CVS.
  - Remove patch that turns off enblend compression, as compression
    is now disabled by default.


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs. patch to call enblend without compression.
    patch to call autopanog.exe via mono.


author: Bruno Postle <bruno@postle.net>
changelog:
  - New build for fedora fc2.
    Now uses automake/autoconf
    Switch dependency from panorama-tools to libpano12 & libpano12-devel


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs.  point picker can do rotation matching, various bugfixes.
    panoviewer doesn't get built anymore.


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs, still requires vigra, though the vigra stuff is now
    in the hugin tree. Installs utilities: mergepto pta2hugin.py run-autopano-sift.sh


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs, needs a newer patched vigra
  - install various (nonworking?) tools automatch autooptimiser panosifter
    autopano_old


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs, requires a vigra with 16bit unsigned tiff support
       remove: autopano_old, automatch, autooptimiser, panosifter


author: Bruno Postle <bruno@postle.net>
changelog:
  - new build from cvs, new features:
       autopano integration
       delete control points between selected images
       reset positions of all selected images


author: Bruno Postle <bruno@postle.net>
changelog:
  - The vigra library when compiled with shared libraries isn't actually
    necessary to run nona, so it's now only a build requirement.  The
    panorama-tools package is now split with the nonfree package now
    required to run hugin.


author: Bruno Postle <bruno@postle.net>
changelog:
  * Sun Oct 12 2003 Bruno Postle <bruno@postle.net>
  - new build from cvs, added hugin.png desktop icon


author: Mike A. Harris <mharris@redhat.com> 0.0.1.4-1
changelog:
  - Updated xorg-x11-drv-v4l to version 0.0.1.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.0.1.1-1
changelog:
  - Updated xorg-x11-drv-v4l to version 0.0.1.1 from X11R7 RC1.  For some
    unknown reason, the version went backwards from 4.0.0 to 0.0.1.1.
  - Fix *.la file removal.


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.2-1
changelog:
  - Polish, Italian and Dutch translations
  - Fix URL, and package it as README
  - Package copyright-info.txt and related files


author: Michel Salim <michel.salim@gmail.com> - 0.0.2-6
changelog:
  - Adjust file listing for new Evolution
  - Remove unnecessary BR on libgnomeui-devel
  - Add explicit Requires: on evolution


author: Steve Dickson <steved@redhat.com> - 2.19-4
changelog:
  - Made ypserver less verbose on common errors (bz #199236)
  - Don't allow a make for empty domainname's or domainname's set to (none)
    (bz #197646)


author: Phil Knirsch <pknirsch@redhat.com> 2.11-1
changelog:
  - Updated to latest upstream version.
  - Dropped ypserv-2.8-echild.patch (not needed anymore).
  - Fixed several other patches for new version.


author: Alex Larsson <alexl@redhat.com> 2.2-9
changelog:
  - Removed my ypserv-2.2-services patch. According to thorsten
    (yp maintainer) the key in services.byname actually
    SHOULD be port/protocol.


author: Alex Larsson <alexl@redhat.com> 2.2-5
changelog:
  - Add patch that fixes generation of services.byname. (#41851)
  - Actually apply patch #5, seems like it got left out by misstake


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - fix restart initscript option #57129
  - add a "gawk" requires #57002
  - fix printcap bug #56993
  - fix ypxfrd init script #55234


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - add gdbm-devel BuildReq #49767
  - add ypxfrd init script #44845
  - fix #44805
  - fix #20042, adding option to yppasswdd startup
  - own /var/yp


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - upgraded to 1.3.4
  - fixed the fubared Makefile
  - link against gdbm instead of ndbm (it seems to work better)


author: Erik Troan <ewt@redhat.com>
changelog:
  - supports chkconfig
  - updated initscript for status and restart
  - turned off in all runlevels, by default
  - removed postinstall script which didn't do anything


author: Bill Nottingham <notting@redhat.com> - 11-1
changelog:
  - pirut/anaconda now use 24x24. update sizes
  - various additions/removals
  - python scripts aren't useful with current repositories, remove them


author: Miloslav Trmac <mitr@redhat.com> - 0:0.1.18-13
changelog:
  - Add URL:
  - Preserve modification date of header files
  - Ship debian/copyright
  - Compile all files with $RPM_OPT_FLAGS


author: Miloslav Trmac <mitr@redhat.com> - 0:0.1.18-12
changelog:
  - Update to bogl-0.1.18-1.5
  - Drop wlite
  - Split rh.patch by functionality
  - Move the default font to /usr/share/bogl, don't ship it as BDF
  - Change to conform to Fedora packaging guidelines


author: Miloslav Trmac <mitr@redhat.com> - 0:0.1.18-9
changelog:
  - Update to bogl-0.1.18-1.1
  - Don't ship unused ucs fonts in the SRPM
  - Remove obsolete URL: (#168673)


author: Akira TAGOH <tagoh@redhat.com> 0:0.1.18-1
changelog:
  - New upstream release.
    - bogl-0.1.18-rh.patch: updated to be able to apply it for this release.
  - bogl-0.1.9-vga16-others.patch: removed. no need this patch anymore.


author: Matt Wilson <msw@redhat.com> 0:0.1.9-22
changelog:
  - add a workaround for AMD64 that calls iopl(3) in order to gain io
    port access until ioperm() is fixed (#87835).  Workaround for
    (#86321)
  - gzip font.bgf


author: Matt Wilson <msw@redhat.com> 0:0.1.9-17
changelog:
  - always use wlite for bogl/bterm (for now) (#83980)
    (this makes bterm useless for any non-UTF-8 locale)
  - fixed 'bterm' for the normal usage case


author: Matt Wilson <msw@redhat.com>
changelog:
  - use all fb drivers on non-i386
  - package wlite for use in loader
  - use %{_libdir} to get lib64 right


author: Adrian Havill <havill@redhat.com>
changelog:
  - re-write font loader so it can load uncompressed or gzipped files
  - utf8 lib updated
  - fixed bug in bogl_term_new() so struct is inited (s/malloc/calloc/)
  - added term bell (screen flash)
  - changed background/foreground to pretty pretty blue/white


author: Adrian Havill <havill@redhat.com>
changelog:
  - updated utf8 library
  - made bogl_term_out reset the state at every call so glibc
    and utf8.c behave consistently
  - concatenated two Red Hat diff patches


author: Adrian Havill <havill@redhat.com>
changelog:
  - changed behavior of bogl_term_out to queue and save UTF broken between two
    buffers
  - utf8 lib improvements


author: Chris Feist <cfeist@redhat.com> - 2.0.44-1
changelog:
  - New upstream sources.
  - Resolves: rhbz#213878 rhbz#216902 rhbz#213763 rhbz#217436
  - Resolves: rhbz#217460 rhbz#211836 rhbz#211918


author: Adam Goode <adam@spicenitz.org> - 7.10.20-2
changelog:
  - Fix location of documentation in program so help works
  - Semicolon-terminate Category entry in desktop file


author: Adam Tkac <atkac redhat com> 0.17-40.fc7
changelog:
  - improved -D option to rlogind - when name won't be resolved rlogind uses IP address
  - added smp_mflags to make


author: Karel Zak <kzak@redhat.com> 0.17-35
changelog:
  - added support for IPv6 (patch by Jan Pazdziora)
  - fix #198632 - add keyinit instructions to the rsh, rlogin and rexec PAM scripts
    (patch by David Howells)
  - fix #191390 - improve linefeed patch


author: Karel Zak <kzak@redhat.com> 0.17-25
changelog:
  - rexecd uses PAM session now (#68590)
  - fixed errno usage in rcp (#67361)
  - fixed  rexec fails with "Invalid Argument" (#118630)


author: Nalin Dahyabhai <nalin@redhat.com> 0.17-11
changelog:
  - remove directory names from PAM configuration files, allowing them to be used
    for all arches on multilib systems


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed really missing BuildPrereq: libtermcap-devel (#49577)
  - Fixed security problem with rexec.pam (#49181)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - securetty is screwy because rsh doesn't allocate one and rlogin does auth
    before it has a tty, so change the hard-coded TTYs used from "tty" for all
    to "rsh" or "rlogin" or "rexec"


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix PAM config files to always honor nologin and securetty, to use rhosts,
    and to fall back to password auth only for rlogin and rexec (#17183)
  - add references to pam_env to the PAM configs as well (#16170)
  - disable rlogin and rsh by default


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - expunge all mentions of kerberos authentication or DES encryption using
    kerberos from the man pages


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rexec needs pam_set_item() (#60).
  - clarify protocol in rexecd.8.
  - add rexec client from contrib.


author: Julian Sikorski <belegdol[at]gmail[dot]com> - 0.6.3-4
changelog:
  - Removed obsolete stuff
  - Fixed support for chemical-mime-data
  - Removed --add-category X-Fedora from desktop-file-install command


author: Julian Sikorski <belegdol[at]gmail[dot]com> - 0.6.3-2
changelog:
  - Fixed Requires for -devel and -mozplugin packages
  - Moved files in docs/reference/html to the devel package
  - Install .desktop files using desktop-file-install
  - Removed redundant stuff
  - Preserve timestamps


author: Ralf Corsépius <rc040203@freenet.de> - 1.00-1
changelog:
  - Upstream update.
  - BR: perl(File::Copy::Recursive).
  - Drop BR: perl(File::NCopy).
  - Activate AUTOMATED_TESTING (t/99_author.t).


author: Ralph Apel <r.apel at r-apel.de> 0:1.5.2-1jpp
changelog:
  - update to 1.5.2
  - move qname*.jar to /usr/share/java/wsdl4j/qname*.jar
    to make place for qname provided by geronimo-specs


author: Andrea Veri <bluekuja@ubuntu.com> 1.3.2-3
changelog:
  - Added openssl-devel to BR
   - Removed libc.so.6 libc.so.6(GLIBC_2.0), libc.so.6(GLIBC_2.1) in BR
   - Description Changed
   - Fixed URL


author: Nalin Dahyabhai <nalin@redhat.com> - 254-2
changelog:
  - resize the supplemental GID array when it gets too large and a size limit
    isn't set (Gavin Romig-Koch, #232713)


author: Nalin Dahyabhai <nalin@redhat.com> - 254-1
changelog:
  - update to nss_ldap 254
  - use the upstream version scripts
  - stop trying to isolate us from the apps by building with static libraries,
    though that means we're tied to /usr now
  - move the nsswitch module to %{_libdir}; its deps aren't available without
    a mounted /usr anyway
  - make rpmlint happier


author: Nalin Dahyabhai <nalin@redhat.com> - 253-1
changelog:
  - update to 253
    - closes a crasher when glibc's initgroups backend passes in a zero-length,
      NULL buffer to start
    - includes lookup_nssldap updates for autofs


author: Nalin Dahyabhai <nalin@redhat.com> - 251-2
changelog:
  - configure with --enable-configurable-krb5-ccname-gssapi instead of
    --enable-configurable-krb5-ccname, the latter of which doesn't actually
    do anything (Howard Wilkinson)


author: Nalin Dahyabhai <nalin@redhat.com> - 250-5
changelog:
  - adjust nss_ldap's makefile rule to more correctly deduce the right soversion
    for nsswitch modules (#191927)


author: Nalin Dahyabhai <nalin@redhat.com> - 248-2
changelog:
  - set "nss_initgroups_ignoreusers root,ldap" in the default configuration
    file, so that nss_ldap will assume that there are no supplemental groups
    for this user to be found in the directory server (#180657)


author: Nalin Dahyabhai <nalin@redhat.com> 245-1
changelog:
  - update to nss_ldap 245
  - add patch from upcoming 246 release to change the placeholder used when
    userPassword is unreadable from "x" to "*" (upstream #240)


author: Nalin Dahyabhai <nalin@redhat.com> 239-1
changelog:
  - update to nss_ldap 239
  - provide a libnss_ldap.so link for directly linking with nss_ldap, as glibc
    does for the modules it provides


author: Nalin Dahyabhai <nalin@redhat.com> 234-5
changelog:
  - update to pam_ldap 180 to get fix for vulnerability from parsing password
    policy controls which don't contain error numbers (#166164, CAN-2005-2497)


author: Nalin Dahyabhai <nalin@redhat.com> 234-4
changelog:
  - override glibc version detection so that mismatches between the versions of
    32- and 64-bit glibc don't result in our %install installing the module
    with a different name than the 'make install' target uses


author: Nalin Dahyabhai <nalin@redhat.com> 234-3
changelog:
  - fix type mismatch bug in patch for using non-blocking start_tls in
    preference to the blocking version when it's available (#156582)


author: Nalin Dahyabhai <nalin@redhat.com> 232-2
changelog:
  - prefer using libraries in %{_libdir}/nss_ldap-openldap if we find any
  - use ldap_start_tls in preference to ldap_start_tls_s, if found, so that
    we can time out if the server has gone catatonic


author: Nalin Dahyabhai <nalin@redhat.com> 227-1
changelog:
  - update to version 227
  - force nss_ldap to mimic pam_ldap's behavior when the tls_checkpeer setting is
    unconfigured in ldap.conf


author: Nalin Dahyabhai <nalin@redhat.com> 226-3
changelog:
  - fix misleading doc comment in /etc/ldap.conf -- the checkpeer setting follows
    libldap's default, which is dependent on the version of OpenLDAP which which
    this package is linked (part of #143622)


author: Nalin Dahyabhai <nalin@redhat.com> 226-1
changelog:
  - update to nss_ldap 226, pam_ldap 176
  - rework pam_ldap dns autoconfig patch
  - require automake instead of automake15, because autoreconf uses the current
    version (#129877)


author: Nalin Dahyabhai <nalin@redhat.com> 212-1
changelog:
  - update to 212, pam_ldap 167
  - link nss_ldap with libgssapi_krb5, the static libsasl2 includes the gssapi
    mech, at least for now, and we pick up its unresolved symbols at link-time
  - fix out-of-bounds error at initialization-time (part of #101269)
  - include pam_ldap's authorization schema files for slapd as a doc file


author: Nalin Dahyabhai <nalin@redhat.com> 207-5
changelog:
  - fix objectclass and attribute mapping, which failed due to uninitialized
    fields in mapping index structures, fixed upstream in 210 (#110547)


author: Nalin Dahyabhai <nalin@redhat.com> 207-3
changelog:
  - link dynamically with libcom_err if it isn't in /usr/kerberos/%{_lib} (which
    we assume means that it's in /%{_lib})


author: Nalin Dahyabhai <nalin@redhat.com> 207-1
changelog:
  - update to build with newer OpenLDAP
  - add README.TLS to remind people that in order for TLS support to be usable,
    the server's certificate has to pass validation checks made by the client


author: Nalin Dahyabhai <nalin@redhat.com> 202-4
changelog:
  - rework static link order to account for libssl requiring libkrb5
  - force assembly locking on %ix86 systems
  - link with libz, which libssl also requires


author: Nalin Dahyabhai <nalin@redhat.com> 202-2
changelog:
  - apply DB patches from sleepycat.com
  - correctly point nss_ldap at the bundled DB library
  - create /%{_lib} instead of /lib to install into


author: Nalin Dahyabhai <nalin@redhat.com> 202-1
changelog:
  - update to nss_ldap 202, pam_ldap 153
  - update DB from 4.0.14 to 4.1.24.NC
  - try to address multilib path changes


author: Nalin Dahyabhai <nalin@redhat.com> 188-0.6
changelog:
  - rebuild for RHL 6.2
  - change dependency on pam-devel to /usr/include/security/pam_modules.h
  - drop build deps on cyrus-sasl-devel and openldap >= 2.x
  - modify pam_ldap versions file so that binutils from RHL 6.2 can parse it
  - update to nss_ldap 188
  - update to pam_ldap 144


author: Nalin Dahyabhai <nalin@redhat.com> 184-1
changelog:
  - update to pam_ldap 138
  - enable rfc2307bis schema support
  - version the pam_ldap module
  - add the proper soname to the nss_ldap module and remove the symlink
  - add a trigger to run ldconfig again when an upgrade removes the symlink,
    which used to be in this package (doh!)
  - fix the symlink from %{_libdir} to the module (for linking directly to it)


author: Nalin Dahyabhai <nalin@redhat.com> 173-1
changelog:
  - update to nss_ldap 173, which includes doc updates
  - update to pam_ldap 133, which simplifies the dnsconfig patch quite a bit


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - link statically with libldap again, because libldap is linked with other
    shared libraries now (keeping us from having files in /usr open when we
    go to shut the system down)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 172, fixing schema mapping code
  - update to pam_ldap 124, incorporating TLS default option and doc fixes


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 164, fixing the timeout problem correctly
  - update to pam_ldap 122, fixing escaping of user name in filters


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 163, fixing the timeout problem
  - update to pam_ldap 120
  - add gdbm-devel as a buildprereq, because we list it in $LIBS (#48999)
  - add db3-devel as a buildprereq (#48999)
  - add pam-devel as a buildprereq (#48999)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make nss_ldap fail when attempting to startup TLS fails, because that's what
    we do when LDAPS doesn't work (and what pam_ldap does already)
  - add DNS autoconfiguration to pam_ldap


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 149, minor fixes for compile glitches
  - update to pam_ldap 105, minor fixes (as above) and handles shadow expiration


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 138, which folds in our patch for initgroups
  - change the default search base in ldap.conf to dc=example,dc=com


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - version the NSS module so that it works properly with programs which have
    been linked statically to a different version of an LDAP library, like
    Netscape Communicator


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - BuildPrereq gdbm-devel
  - pass RPM_OPT_FLAGS as CFLAGS to %configure
  - if protocol version is 2, explicitly set protocol version to 3 before trying
    to start TLS
  - add STARTTLS support to nss_ldap
  - work around a build-time problem on ia64


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to nss_ldap 122
  - link statically with libsasl, require the first devel package that supplied it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to pam_ldap 67 to fix a bug in template user code
  - convert symlink in /usr/lib to a relative one (#16132)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - use the ldap.conf file as an external source
  - don't forcibly build the support for version 3
  - imported the default spec file from the tarball and fixed it up for RH 6.1


author: Anthony Green <green@redhat.com> 0.4.14-1
changelog:
  - Build for Fedora Extras.
  - Use /usr/lib/rpm/redhat/find-lang.sh /var/tmp/ladspa-swh-plugins-0.4.15-8.fc7-root-mockbuild.
  - Don't own the ladspa dir.


author: Fernando Lopez-Lezcano <nando@ccrma.stanford.edu> 0.4.13
changelog:
  - removed ps_in and ps_out external declarations in pitchscale.h,
    otherwise build fails in fc4/gcc4


author: Scott Baker <scott@perturb.org> - 0.6.3-5
changelog:
  - Removed the execute permission from the examples directory
  - Fixed the changelog to remove the replaceable %clean


author: Scott Baker <scott@perturb.org> - 0.6.3-4
changelog:
  - Removed some commeted lines in the .spec file that weren't needed
  - Changed the permissions on the examples/* scripts
  - Converted the HTML documentation to unix line endings
  - Removed the erroneous commenting of the %clean section of the .spec


author: Kai Engert <kengert@redhat.com> 1.1-2
changelog:
  - Update to SeaMonkey 1.1
  - Pull in patches used by Firefox Fedora RPM package.
  - Fix the DND implementation to not grab, so it works with new GTK+.
  - Fix upgrade path from FC-5 by obsoleting the seamonkey subset
    packages which recently obsoleted mozilla in FC-5.


author: Kai Engert <kengert@redhat.com> 1.0.4-7
changelog:
  - Synch patches with those found in the Firefox package.
  - Add missing, clean up BuildRequires
  - Use --enable-system-cairo
  - Use a dynamic approach to require at least the NSPR/NSS 
    library release used at build time.


author: Kai Engert <kengert@redhat.com> 1.0-6
changelog:
  - Use a single package for all included applications.
  - Make sure installed JavaScript files are not executable.
  - Disable AutoProv, use find-external-requires.


author: Kai Engert <kengert@redhat.com> 1.0-1
changelog:
  - Initial version based on Seamonkey 1.0, using a combination of patches 
    from Mozilla 1.7.x, Firefox 1.5 and Thunderbird 1.5 RPM packages.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-neomagic to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for neomagic video driver generated automatically
    by my xorg-driverspecgen script.


author: Roozbeh Pournader <roozbeh@farsiweb.info> - 20060125-1
changelog:
  - Update to 20060125 (bug #170177)
  - Update docs to 20060114
  - Change versioning to reflect upstream and follow packaging guidelines
  - Provide pfaedit (bug #176548)
  - Use %{?dist} tag (bug #176472)
  - Add localizations
  - No need to remove CVS subdir: fixed upstream
  - No need to covert man pages to UTF-8: fixed upstream
  - Fixed DOS line terminators
  - Use parallel build


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.0-2.20041231
changelog:
  - Avoid RPATH.
  - Convert man pages to UTF-8.
  - Fix pkgconfig and doc file permissions.
  - Use updated upstream icon.
  - Don't include installation documentation.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:0.0-0.fdr.1.20040321
changelog:
  - Updated to 20040321.
  - Changed package name from pfaedit to fontforge.
  - Added Obsoletes: pfaedit.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.6.031110
changelog:
  - Updated to 031110.
  - Eliminated build patch; incorporated in upstream tarball.
  - Re-added documentation tarball since no longer included in source tarball.
  - Added pfaicon.gif as Packaging directory disappeared from tarball.


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.3.031012
changelog:
  - Fixed non-standard value in desktop file (bug 497).
  - Added libuninameslist support.
  - Removed separate documentation tarball; mostly identical to those in source (bug 497).


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.2.031012
changelog:
  - Patched to use dynamic linking instead of dlopen'ing (bug 497).
  - Patched to use htmlview and use installed documentation (bug 497).
  - Added build req libxml2-devel (bug 497).
  - Disabled parallell make (bug 497).
  - Added desktop entry (bug 497).


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> 0:0.0-0.fdr.1.031012
changelog:
  - Updated to 031012.
  - Removed .so links.
  - Removed empty AUTHORS file.
  - Removed the samples subpackage.


author: Paul Howarth <paul@city-fan.org> - 1.6-6
changelog:
  - Use full URL for upstream tarball location
  - Don't use macros in build-time command paths (see #170506 for discussion)
  - Tarball expands to directory z88dk, not z88dk-%{version}


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> 1.6-3
changelog:
  - Fixed the spec file as it was constantly looking to /var/tmp!
  - Fixed the source to point to /usr/share/z88dk for configs
  - Removed `pwd` as it was causing problems


author: Paul Howarth <paul@city-fan.org> - 1.6-2
changelog:
  - Use macros consistently
  - Clean out buildroot in %install rather than %prep
  - Include additional docs
  - Tidy summary and description
  - Honor %{optflags}
  - Remove CVS cruft
  - Separate manpages from rest of docs
  - Put target libraries, include files etc. under %{_datadir}, not /usr/lib
  - No scriptlets needed
  - Fix file permissions and line endings
  - Remove vendor and packager tags
  - Use "Artistic" in license tag


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 0.8-2
changelog:
  - Bump release and rebuild for Python 2.5
  - Use macro for path to standard library
  - Eliminate provides/obsoletes pyicqt


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 0.8-1
changelog:
  - Update to 0.8 (see http://www.blathersource.org/releases_view.php?projid=pyicq-t&relid=28)
  - Fix init script to create subsys lock file


author: Dan Walsh <dwalsh@redhat.com> 2.3-1
changelog:
  - Update from upstream
    * apol:
  	added new MLS components tab for sensitivities, 
  	levels, and categories.
  	Changed users tab to support ranges and default 
  	levels.
  	added range transition tab for searching range
  	Transition rules.
  	added new tab for network context components.
  	added new tab for file system context components.
    * libapol:
  	added binpol support for MLS, network contexts, 
  	and file system contexts.
    * seinfo:
  	added command line options for MLS components.
  	added command line options for network contexts
  	and file system contexts.
    * sesearch:
  	added command line option for searching for rules
  	by conditional boolean name.
    * seaudit:
  	added new column in the log view for the 'comm' 
  	field found in auditd log files.
  	added filters for the 'comm' field and 'message'
  	field.
    * manpages:
  	added manpages for all tools.


author: Bill Nottingham <notting@redhat.com> 2.1.0-5
changelog:
  - put libraries in the right place (also puts debuginfo in the right
    package)
  - add %defattr for -devel too


author: Dan Walsh <dwalsh@redhat.com> 1.1-1
changelog:
  - Update to latest code from tresys
  - Break into three separate packages for cmdline, devel and gui
  - Incorporate the tcl patch


author: Phil Knirsch <pknirsch@redhat.com> 6.1.5-31
changelog:
  - Fixed wrong SvR4 system detection on Linux (#110426).
  - Fixed unitialized use of struct (#111189).
  - Make rsh work correctly with password authentification and ssh (#111778).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Finished LFS support for rdist on 32bit archs (#79580).
  - Lots of code cleanup.
  - Switched from mktemp to mkstemp usage.


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Added my 4.3BSD port of the v1 protocol rdist code and provide a oldrdist
    binary (#55761 and several others).
  - Fixed a small manpage problem (#55489)


author: Jason Vas Dias <jvdias@redhat.com> 1.0-0.9.pre5
changelog:
  - Allow build to succeed with new gcc / glibc-kernheaders
    (compile failed on __u64 redefinition on x86_64).
  - Add a static /usr/lib/libnl.a library to libnl-devel for
    programs that might need to do a static link to libnl.
    Added after consultation with Christopher Aillon.


author: Aurelien Bompard <gauret[AT]free.fr> 3.2.1-4
changelog:
  - include the COPYING file
  - put HTML doc in %doc
  - drop useless logos
  - fix %description
  - remove CVS dirs in %prep
  - Thanks to Hans de Goede in bug 165311


author: Aurelien Bompard <gauret[AT]free.fr> 3.2.1-3
changelog:
  - don't backup some patches, or the files will be copied in the buildroot
  - set conf files to noreplace
  - fix manpage encoding


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.2-0.fdr.2
changelog:
  - Re-bzip2 content and voice zips to save space (#88).
  - Fix typos in uqm-voice summary and description (#88).
  - Spec cleanups, save it in UTF-8.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 1.0-12
changelog:
  - fix About dialog
  - fix i18n.py to initialise gettext with the right localedir
  - rename message object files to gdeskcal.mo to fix conflict
    with gdesklets package (#220187)
  - update URL
  - revert language sub-package


author: Kevin Fenzi <kevin@tummy.com> - 0.2.2-2
changelog:
  - Fixed to use %find_lang
  - Removed generic INSTALL from %doc
  - Change description wording: "makes it" to "make it"
  - Fixed to include terminal.css


author: <gilboad AT gmail DOT com> - 0.9.2-3
changelog:
  - Fix wrong group and project URLs.
  - Fix summery, description.
  - Remove BR: glib2-devel. (REQ by gtk2-devel).
  - Add BR: popt
  - Remove gmrunrc from %config section.
  - Set gmrunrc to 0644 (by default it's 0600)
  - Configure gmrunrc to better handle Fedora URI's.
  - Add REQ: htmlview. (gmrunrc)
  - Add REQ: xterm. (gmrunrc)


author: Karel Zak <kzak@redhat.com> 5:6.1.5-6
changelog:
  - fix #223675 - am-utils: non-failsafe install-info
  - fix #231843 - missing build dependency on tcp_wrappers
  - cleanup spec file


author: Karel Zak <kzak@redhat.com> 5:6.1.5-5
changelog:
  - fix #219437 - amd: stopping service will pop up an error dialog in
                  system-config-services app.
  - fix build (m4 stuff) of the package (UTS_RELEASE macro has been removed
                  from the latest kernel-headers)


author: Peter Vrabec <pvrabec@redhat.com> 5:6.1.5-2
changelog:
  - force to use HAVE_LINUX_NFS_MOUNT_H macro, because linux/nfs_mount.h 
    check in configure fails on s390x


author: Peter Vrabec <pvrabec@redhat.com> 6.1.2.1-1
changelog:
  - upgrade
  - fix amd shutdown(#158268,#54246) 	
  - enhancement, /host/localhost and /host/<localmachinename> 
    are symlinks to / (#11843)


author: Peter Vrabec <pvrabec@redhat.com> 6.0.9-12
changelog:
  - fix the am-utils part of #143118 by implementing the util-linux
    mtab locking scheme into am-utils automounter, patch and testing
    by Daniel Berrange <berrange@redhat.com>, improved locking
    algorithm by <prockai@redhat.com> (which allows for several 
    hundred or even thousand of parallel makes to finish 
    successfully and keep /etc/mtab in sync with /proc/mounts  as well)


author: Nalin Dahyabhai <nalin@redhat.com> 6.0.9-1
changelog:
  - update to 6.0.9
  - disable RPM's internal dependency calculation so that we can filter out
    dependencies which are expected to be filled in by the site administrator


author: Nalin Dahyabhai <nalin@redhat.com> 6.0.7-1
changelog:
  - update to 6.0.7, fixing EIO on access bugs (#53251)
  - back out nfs3 patch; no longer needed for current kernels
  - don't explicitly strip binaries; let the buildroot policies handle it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add BuildPrereq: db1-devel (#44987)
  - use FHS macros
  - return error codes correctly from init script (#44597)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add ldconfig to %postun
  - chuck the hesiod patch -- new bind-utils doesn't have the support for it


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - only create /var/lock/subsys/amd if startup succeeds
  - revamp shutdown procedure to minimize time spent just spinning
  - change initscripts dependency to /etc/init.d


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version 6.0.3
  - enhance init script to be more wait4amd2die-like
  - make default map type to be file (#9185)
  - get rid of the kludges


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - remove the noldap patch
  - add amd.net file as the default config map file
  - change the config file to teh new config file format instead of a
    simple map file name.
  - try to avoid some damage with a new %pre script
  - prereq grep now
  - modify the init file so it calls amd -F /etc/amd.conf now


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 1.12-1
changelog:
  - New upstream version
  - New upstream web site (thanks JPO!)
  - Patch for inconsistent shrext variable
  - Minor edits for consistency


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - remove '-g %{RADVD_GID}' when creating the user, which may be problematic
    if the user didn't exist before.


author: Bernhard Rosenkraenzer <bero@redhat.com> 0.7.1-1
changelog:
  - 0.7.1 (bugfix release, #61023), fixes:
    - Check that forwarding is enabled when starting radvd
      (helps avoid odd problems) 
    - Check configuration file permissions (note: in setuid operation, must not
      be writable by the user.group) 
    - Cleanups and enhancements for radvdump
    - Ensure NULL-termination with strncpy even with overlong strings
      (non-criticals, but better safe than sorry) 
    - Update config.{guess,sub} to cope with some newer architectures 
    - Minor fixes and cleanups


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - License unfortunately is BSD *with* advertising clause, so to be pedantic,
    change License: to 'BSD-style'.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - update to 0.62pl1.  Bye bye patches!
  - Require: initscripts (should really be with a version providing IPv6)
  - clean up the init script, make condrestart work properly
  - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add patch to chroot (doesn't work well yet, as /proc is used directly)
  - clean up droproot patch, drop the rights earlier; require user-writable
  pidfile directory
  - set up the pidfile directory at compile time.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add select/kill signals patch from Nathan Lutchansky <lutchann@litech.org>.
  - add address syntax checked fix from Marko Myllynen <myllynen@lut.fi>.
  - add patch to check the pid file before fork.
  - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
  default one.
  - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
  - fix initscript NETWORKING_IPV6 check.


author: Tim Powers <timp@redhat.com>
changelog:
  - applied patch supplied by Pekka Savola in #30508
  - made changes to initscript as per Pekka's suggestions


author: Tim Powers <timp@redhat.com>
changelog:
  - use %configure and %makeinstall, just glob the manpages, cleans
    things up
  - fixed initscript so that it can be internationalized in the future


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Create a single package(source) for glibc21 and glibc22 (automatic
  Requires can handle this just fine).
  - use %{_mandir} and friends
  - add more flesh to %doc
  - streamline %config file %attrs
  - streamline init.d file a bit:
     * add a default chkconfig: (default to disable for security etc. reasons; 
       also, the default config isn't generic enough..)
     * add reload/condrestart
     * minor tweaks
     * missing: localization support (initscripts-5.60)
  - use %initdir macro


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.01 bugfix release ("bytea" coredumped with values outside 0...127)
  - Add perl-DBI and perl to BuildRequires (they were just in Requires: previously)


author: Tim Waugh <twaugh@redhat.com> 0.6.3-15
changelog:
  - Patch from Ville Skyttä <ville.skytta at iki.fi> (bug #111625):
    - Include /usr/share/xml in xml-common.
    - Own /usr/share/sgml and /usr/share/xml.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-8
changelog:
  - Back to /usr/share/sgml.  Now install docbook-dtds.
  - Use a real install-sh, not the symlink shipped in the tarball.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-6
changelog:
  - Don't create a useless empty catalog.
  - Don't try to put install things outside the build root.
  - Build requires a libxml2 that actually works.


author: Tim Waugh <twaugh@redhat.com> 0.6.3-1
changelog:
  - 0.6.3.  Incorporates oldsyntax and quiet patches.
  - Make /etc/sgml/sgml.conf noreplace.
  - Own /etc/sgml, various other directories (bug #47485, bug #54180).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Install by hand (man/en/...).  Use %{_mandir}.
  - Use %{_tmppath}.
  - Make install-catalog fail silently if given the old syntax.
  - Add CHANGES file.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Miloslav Trmac <mitr@redhat.com> - 6.14-7
changelog:
  - Fix a crash when reading scripts with multibyte characters (#183267)
  - Block SIGINT while waiting for children (#177366)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-12
changelog:
  - Don't ship the HTML documentation (generated from the man page, contains
    also a copy of the man page)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-7
changelog:
  - Define $HOSTTYPE and $MACHTYPE for ppc64 and s390 (#115531),
    I hope that finally covers all architectures.


author: Miloslav Trmac <mitr@redhat.com> - 6.13-6
changelog:
  - Define $HOSTTYPE and $MACHTYPE also on IA-64 and s390x (#115531)
  - Don't close sockets to avoid file descriptor conflits with nss_ldap (#112453)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-5
changelog:
  - Fix HTML documentation generation, second attempt (#60664)
  - Set dspmbyte using nl_langinfo(CODESET) if possible, should cover all
    cases where lang.csh was correctly setting dspmbyte (#89549)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-2
changelog:
  - Make comparisons for ranges in bracket expressions symmetric (#59493)
  - Run perl2html with LC_ALL=C to workaround what seems to be a perl bug
    (#60664)
  - Define $HOSTTYPE and $MACHTYPE on x86_64 (#115531)
  - Fix setting of O_LARGEFILE (#122558)


author: Miloslav Trmac <mitr@redhat.com> - 6.13-1
changelog:
  - Update to tcsh-6.13.00
  - Fix charset headers in some of the translations
  - Convert translated messages to LC_CTYPE locale
  - Fix automatic dspmbyte setting


author: Adrian Havill <havill@redhat.com>
changelog:
  - use <time.h> instead of <sys/time.h> for pickier lib (#25935)
  - allow arguments for login shells (#19926)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - patch for using PATH_MAX instead of some silly internal #defines for
    variables that handle filenames.


author: Karsten Hopp <karsten@redhat.com> 1.5.22-11
changelog:
  - use ./configure so that config.{sub,guess} will not be replaced with ancient
    version of those files (#234778)


author: Karsten Hopp <karsten@redhat.com> 1.5.22-7
changelog:
  - update config.guess, config.sub with newer files from automake-1.10
  - skip over lines in /etc/ld.so.conf.d/* which don't look like absolute paths 
    (p.e. files from kernel-xen). This avoids having unwanted relative paths in 
    lib_search_path


author: Karsten Hopp <karsten@redhat.de> 1.5.22-1
changelog:
  - update to 1.5.22, most prominent fixes are:
    - Fix 1.5 regression that caused linking a program `-static' to also
      link statically against installed libtool libraries, contrary to
      documented (and actual 1.4.x) behavior.
    - Fix silent failure of `libtoolize --ltdl' if libltdl files not present.


author: Florian La Roche <laroche@redhat.com>
changelog:
  - add version-release to the Provides: and fix our own
    Requires: line to the current naming scheme


author: Daniel Reed <djr@redhat.com> 1.5.12.multilib2-3.4.3
changelog:
  - update to the 1.5.12 bugfix release
    - Makes use of $datarootdir, which is necessary for Autoconf >= 2.60.
    - Correctly skip hppa, x86_64, and s390* in tests/demo-nopic.test.
    - Interpret `include' statements in toplevel ld.so.conf file.
    - While "parsing" /etc/ld.so.conf, skip comments.
  - add dependency on gcc version; /usr/bin/libtool hardcodes paths into gcc's internal directories
  - replace "libtool-libs" with "libtool-ltdl" and "libtool-ltdl-devel"


author: Daniel Reed <djr@redhat.com> 1.5.10-1
changelog:
  - update to the 1.5.10 bugfix release
    - obsoletes libtool-1.4-nonneg.patch
    - obsoletes libtool-1.5-libtool.m4-x86_64.patch
    - obsoletes libtool-1.4.2-multilib.patch
    - obsoletes libtool-1.4.2-demo.patch
    - obsoletes libtool-1.5-testfailure.patch


author: Jens Petersen <petersen@redhat.com> - 1.5.4-1
changelog:
  - 1.5.4 bugfix release
  - improve libtool-1.4.2-multilib.patch (Albert Chin) and only apply to
    libtool.m4
  - use bootstrap instead of autoreconf to update configuration
  - update libtool-1.4.3-ltmain-SED.patch to libtool-1.5.4-ltmain-SED.patch


author: Jens Petersen <petersen@redhat.com> - 1.5.2-1
changelog:
  - update to 1.5.2 bugfix release
  - update libtool-1.5-libtool.m4-x86_64.patch
  - nolonger need libtool-1.5-mktemp.patch, libtool-1.5-expsym-linux.patch,
    libtool-1.5-readonlysym.patch, libtool-1.5-relink-libdir-order-91110.patch,
    libtool-1.5-AC_PROG_LD_GNU-quote-v-97608.patch and libtool-1.5-nostdlib.patch


author: Jens Petersen <petersen@redhat.com> - 1.5-4
changelog:
  - remove the quotes around LD in AC_PROG_LD_GNU (#97608)
    [reported by twaugh]
  - use -nostdlib also when linking with g++ and non-GNU ld in
    _LT_AC_LANG_CXX_CONFIG [reported by fnasser, patch by aoliva]
  - use %configure with CC and CXX set


author: Jens Petersen <petersen@redhat.com> - 1.5-3
changelog:
  - don't use %configure since target options caused libtool to assume
    i386-redhat-linux-gcc instead of gcc for CC (reported by Joe Orton)
  - add libtool-1.5-relink-libdir-order-91110.patch to fix order of lib dirs
    searched when relinking (#91110) [patch from Joe Orton]


author: Jens Petersen <petersen@redhat.com> - 1.5-1
changelog:
  - update to 1.5
  - no longer override config.{guess,sub} for rpmbuild %configure,
    redhat-rpm-config owns those now
  - update and rename libtool-1.4.2-s390_x86_64.patch to
    libtool-1.5-libtool.m4-x86_64.patch since s390 now included
  - buildrequire autoconf and automake, no longer automake14
  - skip make check on s390 temporarily
  - no longer skip demo-nopic.test on x86_64, s390 and s390x
  - from Owen Taylor
    - add libtool-1.4.2-expsym-linux.patch (#55607) [from James Henstridge]
    - add quoting in mktemp patch
    - add libtool-1.5-readonlysym.patch
    - add libtool-1.5-testfailure.patch workaround
    - no longer need libtool-1.4.2-relink-58664.patch


author: Florian La Roche <Florian.LaRoche@redhat.de> - 1.4.3-5
changelog:
  - add config.guess and config.sub, otherwise old versions of
    these files can creep into /usr/share/libtool/


author: Jens Petersen <petersen@redhat.com> 1.4.3-3
changelog:
  - fix mktemp to work when running mktemp fails (#76602)
    [reported by (Oron Peled)]
  - remove info dir file, don't exclude it
  - fix typo in -libs description (#79619)
  - use buildroot instead of RPM_BUILD_ROOT


author: Jens Petersen <petersen@redhat.com>
changelog:
  - add --without check build option to allow disabling of "make check"
  - exclude info dir file rather than removing


author: Jens Petersen <petersen@redhat.com> 1.4.3-2
changelog:
  - define SED in ltmain.sh for historic ltconfig files
  - define macro AUTOTOOLS to hold automake-1.4 and aclocal-1.4, and use it
  - leave old missing file for now
  - general spec file cleanup
    - don't copy install files to demo nor mess with installed ltdl files
    - don't need to run make in doc
    - force removal of info dir file
    - don't need to create install prefix dir
    - don't bother gzipping info files ourselves


author: Jens Petersen <petersen@redhat.com> 1.4.3-1
changelog:
  - update to 1.4.3
  - remove obsolete patches (test-quote, dup-deps, libtoolize-configure.ac)
  - apply the multilib patch to just the original config files
  - update x86_64/s390 patch and just apply to original config files
  - use automake-1.4 in "make check" for demo-make.test to pass!
  - remove info dir file that is not installed
  - make autoreconf update missing


author: Jens Petersen <petersen@redhat.com> 1.4.2-11
changelog:
  - don't hardcode "configure.in" in libtoolize (#70864)
    [reported by bastiaan@webcriminals.com]
  - make check, but not on ia64


author: Jens Petersen <petersen@redhat.com> 1.4.2-8
changelog:
  - add old patch from aoliva to fix relinking when installing into a buildroot
  - backport dup-deps fix from cvs stable branch


author: Jens Petersen <petersen@redhat.com> 1.4.2-5
changelog:
  - revert filemagic and archive-shared patches following cvs (#54887)
  - don't change "&& test" to "-a" in ltmain.in


author: Jens Petersen <petersen@redhat.com> 1.4.2-3
changelog:
  - test quoting patch should be on ltmain.in not ltmain.sh (#53276)
  - use file_magic for Linux ELF (#54887)
  - allow link against an archive when building a shared library (#54887)
  - include ltdl.m4 in manifest (#56671)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - patch to use mktemp to create the tempdir
  - use %configure after defining __libtoolize to /bin/true


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - explicitly disable per-arch libraries (#2210)
  - undo hard links and remove zero length file (#2689)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - disable the --cache-file passing to ltconfig; this breaks the older
    ltconfig scripts found around.


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1.2.1-3
changelog:
  - Taking over as maintainer since Anvil has other priorities
  - Long long due rebuild with new gcc for FC-5, it seems this may have already
    been done, since the last rebuild was of March 16 and the Rebuild Request
    bug of March 19? Rebuilding anyway to be sure (bug 185873)


author: Christoph Wickert <fedora wickert at arcor de> - 0.8-4
changelog:
  - Compile with "-Wl,--export-dynamic" on Core 5 (#184001).
  - Don't kill gconfd in %pre, %post and %preun any longer (#173869).
  - Fix typo in %changelog.


author: Petr Machata <pmachata@redhat.com> - 4.1.5-4
changelog:
  - remove superfluous multibyte processing in str_append for UTF-8
    encoding (thanks Paolo Bonzini, #177246)


author: Petr Machata <pmachata@redhat.com> - 4.1.5-2
changelog:
  - #185374:
    - Follow symlinks before rename (avoid symlink overwrite)
    - Add -c flag for copy instead of rename (avoid ownership change)


author: Jakub Jelinek <jakub@redhat.com> 4.0.8-3
changelog:
  - if not -n, print current buffer after N command on the last line
    unless POSIXLY_CORRECT (#112952)
  - adjust XFAIL_TESTS for the improved glibc regex implementation
    (#112642)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 4.0.7
  - use "--without-included-regex"
  - do not gzip info pages in spec file, "TODO" is not present anymore


author: Remi Collet <Fedora@FamilleCollet.com> 1.5.0-1
changelog:
  - generated spec file (pear make-rpm-spec)
  - add french sumnary and description
  - add LICENSE CHANGELOG


author: David Malcolm <dmalcolm@redhat.com> - 2.2.5-1
changelog:
  - 2.2.5
  - Removed gnome-bug-306877-soup-connection-ntlm.c.patch (#160071) as this is 
    now in upstream tarball


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-1
changelog:
  - update from 2.2.1 to 2.2.2
  - add explicit devel requirements on glib2-devel, pkgconfig, gtk-doc, gnutls-devel and libxml2-devel


author: Jeremy Katz <katzj@redhat.com> 1.99.17-1
changelog:
  - rename package to libsoup
  - update to 1.99.17
  - don't obsolete soup for now, it's parallel installable


author: Jeremy Katz <katzj@redhat.com> 0.7.9-3
changelog:
  - better lib64 patch
  - fix building of libwsdl-build to use libtool so that it gets built 
    with -fPIC as needed


author: Jeremy Katz <katzj@redhat.com> 0.7.4-3
changelog:
  - fix to not try to include non-existent doc files and remove all 
    unwanted files from the build
  - include api docs 
  - don't build the apache module


author: Karsten Hopp <karsten@redhat.de> 6.1-1
changelog:
  - update to 6.1 (BLKGETSIZE fixes)
  - work around hdparm's usage of kernel headers, assume
    that we run it on little-endian machines only


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - update to 5.2 with the following fixes:
   - v5.2 compile fixes for 2.5.xx
   - v5.1 fixed segfault in "-i" on older drives
   - v5.0 lots of updates and new features
   - v4.9 fixed compile error with 2.5.xx kernels
   - v4.8 changed -Q to allow specifying queue depth
   - v4.7 added -z, -Q, -M flags; expanded parm range for -p


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - disable readahead (#14268)
  - add comment in /etc/sysconfig/harddisks about possible extra parameters


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Use O_NONBLOCK when opening devices so we can manipulate CD-ROM drives
    with no media inserted, even when running a current kernel (Bug #6457)


author: Balint Cristian <cbalint@redhat.com> 0.9.20070123-5
changelog:
  - clean junks from tarball
  - exlude static library
  - smp build seems fine
  - use snapshot instead of cvsver macro
  - follow package n-v-r from fedora standard


author: Balint Cristian <cbalint@redhat.com> 20070123-2
changelog:
  - first build for fedora-extras
  - request gnu/stubs-32.h to force working gcc in 32 bit enviroment
  - fix PAGE_SIZE wich is missing on some arch
  - dont use libdir macro, all library always will be 32 bit


author: Dmitry Butskoy <Dmitry@Butskoy.name> - 1.4-1
changelog:
  - initial release
  - install mbrfat.bin and ldlinux.bss binary files, they are
    actually needed to create something useful here.
  - add README.usbboot -- instruction how to make diskboot.img more helpful
    (written by me).


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.47-6
changelog:
  - Make chklastlog default to /var/log/lastlog and /var/log/wtmp,
    which can be set with options -l and -f, too, however.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.47-4
changelog:
  - Don't like the previous patch yet, since it is unsafe and
    makes -p more difficult, so removed it again.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.47-3
changelog:
  - Patch OpenBSD rootkit check to not report libgcj file
    /usr/lib/security/classpath.security without querying the RPM
    database about that file
  - Add README.false_positives


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.43-0.fdr.4
changelog:
  - rh80 doesn't have sed -i, use perl instead (#1326).
  - Obsolete chkrootkit-strings patch due to soft-link since 0.43-0.fdr.1.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.43-0.fdr.1
changelog:
  - Update to 0.43.
  - Add dependency on consolehelper binary.
  - Drop patched chkrootkit script due to change in 0.42-0.fdr.3.b.
  - Make available "strings-static" as "strings", too.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.42-0.fdr.3.b
changelog:
  - Make /usr/bin/chkrootkit enter chkrootkit home directory.
    This puts its own helper tools into its search path.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.42-0.fdr.1
changelog:
  - Updated to 0.42.
  - Moved pam and console entries into seperate files.
  - Install into %{_datadir} not %{_libdir}.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.41-0.fdr.3
changelog:
  - Moved chkrootkit.lsm into docs.
  - Explicitly set file permissions for icon and desktop entry on install.
  - No longer include backup of original chkrootkit script.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.40-0.fdr.3
changelog:
  - Modified the chkrootkit scrip to execute the other sub programs correctly when called from the menu entry.


author: Phillip Compton <pcompton[AT]proteinmedia.com> - 0:0.39a-0.fdr.4
changelog:
  - Added Epoch:0.
  - Added desktop-file-utils to BuildRequires.
  - Changed category to X-Fedora-Extra.
  - Moved desktop entry into seperate file.


author: Robert Scheck <robert@fedoraproject.org> 0.92-3
changelog:
  - Added patch, that allows specifying the Jabber server manually
  - Don't start bitlbee per default as xinetd service


author: Dan Williams <dcbw@redhat.com> - 1.5.1-2
changelog:
  - Fix off-by-one when searching for language specification files
      which breaks syntax hilighting.  Already fixed upstream.


author: Warren Togami <wtogami@redhat.com> 1.0.0-2
changelog:
  - BR gnome-vfs2-devel libxml2-devel intltool gtk-doc gtk2-devel libgnomeprint22-devel 
    libgnomeprintui22-devel gettext


author: Alan Cox <alan@redhat.com>
changelog:
  - Added Chris Woods patches as requested by Al Viro to handle modern
    namespace mounting and unmount by mount point not device


author: Fernando Nasser <fnasser@redhat.com> 0:1.1.1-3jpp
changelog:
  - Add trigger to remove old javamail.jar file from monolithic subpackage
  - Fold -monolithic subpackage into main package to simplify dependency
    specifications in other packages
  - Require update-alternatives to be present during install/uninstall
  - Fix versioned providers jar file name
  - Install/remove alternatives in the monolithic subpackage
  - Fix providers jar names
  - Add AOT bits


author: Fernando Nasser <fnasser@redhat.com> 0:1.1.1-2jpp
changelog:
  - Change handling of alternatives to 6-digit scheme
  - Change handling of javadocs to new %{_netsharedpath} and 
    "/usr/share mounted read only" friendly scheme


author: Fernando Nasser <fnasser@redhat.com> 0:1.1-1jpp
changelog:
  - Upgrade to Classpathx-Mail 1.1
  - Add fix for handling of Mime multipart messages from Archit Shah
    From Gary Benson <gbenson@redhat.com>:
  - Add a javamail-monolithic equivalent.


author: Gary Benson <gbenson@redhat.com> 0:1.0-4jpp_1fc
changelog:
  - Remove now-unnecessary workaround for #132524.
  - Upgrade to 1.0-4jpp.
  - Add a javamail-monolithic equivalent.


author: Thomas Fitzsimmons <fitzsim@redhat.com> 0:1.0-3jpp
changelog:
  - Don't require classpath-inetlib.
  - Require java-sasl and jce.
  - Replace gnu.inet references with org.jpackage.mail.inet.
  - Build inetlib.
  - Include inetlib in providers.jar.


author: Kevin Fenzi <kevin@tummy.com> - 0.3.0-4
changelog:
  - Fixed exo gtk-doc directory not being included in devel
  - Changed pygtk defs dir 
  - Added Requires to devel for pkg-config dependency


author: Kevin Fenzi <kevin@tummy.com> - 0.3.0-3
changelog:
  - Added gettext to buildrequires
  - Moved devel docs to devel package only
  - Added find_lang for locale files
  - Added more docs to base package


author: Kevin Fenzi <kevin@tummy.com> - 0.3.0-2
changelog:
  - Added lang to files
  - Fixed some file paths
  - Remove unneeded la files
  - Added pygtk2-devel buildrequires


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 1.0.12-4
changelog:
  - Split out libraries to -libs subpackage, fixing BZ#221711
  - Implemented changes as recommended by Jason Tibbitts
  - Adjusted aoss patch to allow for 32-bit library use on x86_64
  - Added reference in man page to added functionality
  - Resultant alsa-oss package reports no-binary error (necessary evil, I guess)


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 1.0.12-3
changelog:
  - Added conditionalized rpath fixes for x86_64 (thanks Denis!)
  - Re-added *.a to -devel package
  - Added %defattr for -devel, added oss-redir/README as %doc


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 1.0.12-2
changelog:
  - Adding --disable-static to configure
  - Removing *.a from -devel package
  - Adding name and version to patch
  - Removing commented-out autoreconf line
  - Forcibly deleting *.a files in %install (why didn't it believe me?)


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 1.0.12-1
changelog:
  - Hijacked from stalled review (BZ#187706)
  - Bumped to 1.0.12 for devel branch
  - Removed Req for /sbin/ldconfig (unnecessary when using -p in scriptlets)
  - Added dist tag!
  - Made macros slightly more consistent
  - Deleted .la files in %install


author: Steven Pritchard <steve@kspei.com> 0.39-1
changelog:
  - Update to 0.39.
  - Use fixperms macro instead of our own chmod incantation.
  - BR ExtUtils::MakeMaker.


author: Steven Pritchard <steve@kspei.com> 0.38-4
changelog:
  - Cleanup to more closely resemble current cpanspec output.
  - kwiki is a program, not documentation.


author: Jose Pedro Oliveira <jpo@di.uminho.pt> - 1.48-4
changelog:
  - (#154762)
  - License information: GPL or Artistic
  - Removed the Time::HiRes building requirement (see Changes)
  - Removed the empty .bs file
  - Corrected file permissions


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - build for main distribution
  - use %{_tmppath}
  - change name of specfile
  - don't use a find script to generate file lists
  - general cleanup
  - add descriptive summary and description


author: Simon Matter <simon.matter@invoca.ch>
changelog:
  - added more fixes to the autocreate patch
  - don't use /usr/lib64 for /usr/lib/cyrus-imapd, it's a mess on x86_64
  - don't use /usr/lib64 for symlinks
  - remove /usr/lib64 pachtes
  - change pam configs to work on x86_64
  - changed default build option for IDLED to on
  - changed rpm_set_permissions to honor partitions in /etc/imapd.conf


author: Warren Togami <wtogami@redhat.com> 1.5-1
changelog:
  - upgrade to 1.5
  - spec cleanups
  - remove INSTALL, TODO; Add NEWS
  - Now requires libdv, docs say it is much faster and better output than raw1394
  - BuildRequires libraw1394-devel, libavc1394-devel, libdv-devel, libjpeg-devel,
    libpng-devel, libogg-devel, libvorbis-devel


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.13-0.fdr.2
changelog:
  - Sync with IANA 20040517.
  - Require perl >= 1:5.6.1 for vendor install dir support.
  - Use pure_install to avoid perllocal.pod workarounds.


author: Michael A. Peters <mpeters@mac.com> - 1.0.3-7
changelog:
  - add CUPS and APCUPSD to services
  - don't open browser window since it runs as root (bug #178040)
  - add PDF documentation
  - some spec file cleanup


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 1.0.3-5
changelog:
  - temporarily add BR libpng-devel to work-around a broken
    cairo-devel package, which is pulled in and breaks the pkg-config
    dependency chain (#161688)


author: Phillip Compton <pcompton[AT]proteinmedia.com> 0:0.9.2-0.fdr.9
changelog:
  - Removed aesthetic comments.
  - Corrected permissions of source files.
  - Brought spec more in line with current template.


author: Phillip Compton <pcompton[AT]proteinmedia.com> 0:0.9.2-0.fdr.2
changelog:
  - Readded Epoch: 0.
  - Split pam.d and console.apps files into separate SOURCE files.
  - Removed hard-coded paths.
  - Added explicit epochs.
  - Added Req iptables.
  - Package now owns %{_sysconfdir}/firestarter.


author: Tomas Junnonen <majix@sci.fi>
changelog:
  - Updated requirements to GNOME2 level
  - Removed all requirements related to the documentation generation


author: Roy-Magne Mo <rmo@sunnmore.net>
changelog:
  - Clean up specfile, and use rpm4 macros
  - Remove docuementation tools as requirements
  - Add gnome-doc-tools and then some as buildprereq
  - Add initscripts to prereq
  - used 
    /usr/bin/make \
  	prefix=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr \
  	exec_prefix=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr \
  	bindir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/bin \
  	sbindir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/sbin \
  	sysconfdir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/etc \
  	datadir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/share \
  	includedir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/include \
  	libdir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/lib64 \
  	libexecdir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/libexec \
  	localstatedir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/var \
  	sharedstatedir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/com \
  	mandir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/share/man \
  	infodir=/var/tmp/firestarter-1.0.3-14.fc6-root-mockbuild/usr/share/info \
    install macro instead of old make install
  - no use specifying runlevels at the commandline, this
    should be specified in the initscripts itself
  - Added gnome-core as requirements


author: Tomas Junnonen <majix@sci.fi>
changelog:
  - preun now doesn't explicitly delete the init script,
    caused problem with package upgrades.
  - Moved the init scripts to external files


author: Patrice Dumas <pertusus@free.fr> 0.7-6
changelog:
  - all changes are from Dmitry Butskoy
  - use a sed one-liner instead of Patch1
  - use intuitively and some wildcards for %files
  - properly recreate man pages
  - pass sysconfdir to make instead of patching Makefile.in


author: Patrice Dumas <pertusus@free.fr> 0.7-4
changelog:
  - Buildrequires flex, libnet-devel
  - (noreplace) for config
  - replace /usr/share by /opt in example config file
  - no make clean, use smp_mflags


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Make tetex a %post requirement.
  - Silence %post output.
  - Don't play so many macro games.
  - Build requires unzip.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Require openjade not jade.
  - rm before install.
  - Use %{_tmppath}.
  - Require tetex-latex.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Dan Walsh <dwalsh@redhat.com> 0.1.4-1
changelog:
  - Add patch from sgrubb
  - 	Fix 64 bit size problems
  - 	Increase the open file limit
  -	Make sure maximum size is not exceeded


author: Adrian Havill <havill@redhat.com> 3.2-2
changelog:
  - changed spec "Copyright" to "License"
  - use 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=x86_64-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info macro, /usr/lib64 for non-ia32 archs
  - removed unnecessary set and unset, assumed/default spec headers
  - fixed unpackaged man page, duplicate /bin and /lib entries
  - use plain install vs scripts for non-i386 buildsys


author: Brandon Holbrook <fedora at theholbrooks.org> 1.1.2-1
changelog:
  - Completely reworked for Fedora
  - config files moved to /etc/horde/ingo
  - use find_lang to pull in translations


author: Johnny Hughes <johnny@centos.org> 1.1.1.c4
changelog:
  - rolled in upstream update 1.1.1
  - changed all config file from config to config(noreplace)
  - new upstream file (stripe.js) required adding %{contentdir}/horde/ingo/js
    to the files section


author: Orion Poplawski <orion@cora.nwra.com> 1.6.4-3
changelog:
  - Add --enable-threads --with-pthreads to configure
  - Add %check
  - Add some %docs
  - Use 
    /usr/bin/make \
  	prefix=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr \
  	exec_prefix=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr \
  	bindir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/bin \
  	sbindir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/sbin \
  	sysconfdir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/etc \
  	datadir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/share \
  	includedir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/include \
  	libdir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/lib \
  	libexecdir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/libexec \
  	localstatedir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/var \
  	sharedstatedir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/com \
  	mandir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/share/man \
  	infodir=/var/tmp/hdf5-1.6.5-7.fc7-root-mockbuild/usr/share/info \
    install
  - Add patch to fix test for h5repack
  - Add patch to fix h5diff_attr.c


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 2.60-3
changelog:
  - Use sed instead of dos2unix
  - Some small fixes from review bug #233715
  - Apply one patch from Debian that should warn if there are problems with
    local delivery via sendmail


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 2.60-2
changelog:
  - Seperate package for html2text, as it might be useful for other stuff
    as well
  - update r2e and make it possible to manage different feed files (optional,
    use r2e option "--feedext foo" to use it)
  - add some common used, but-no-so-well documented configuration parameters
    to config.py template and give a hint where to find docs what they do


author: Dennis Gilmore <dennis@ausil.us> - 0.18-5
changelog:
  - add BuildRequires desktop-file-utils  http://fedoraproject.org/wiki/QAChecklist 
  - add %post and %postun scriptlets  to notify of new icons per
  - http://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html#implementation_notes


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE4-3
changelog:
  - added fix for #183869 - squid can abort when getting status
  - added upstream fixes:
      * Bug #1796: Assertion error HttpHeader.c:914: "str"
      * Bug #1779: Delay pools fairness, correction to first patch
      * Bug #1802: Crash on exit in certain conditions where cache.log is not writeable
      * Bug #1779: Delay pools fairness when multiple connections compete for bandwidth
      * Clarify the select/poll/kqueue/epoll configure --enable/disable options
  - reworked fd patch for STABLE4


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE4-2
changelog:
  - upstream fixes:
    * Accept 00:00-24:00 as a valid time specification (upstream BZ #1794)
    * aioDone() could be called twice
    * Squid reconfiguration (upstream BZ #1800)


author: Martin Stransky <stransky@redhat.com> - 7:2.6.STABLE1-1
changelog:
  - new upstream + the latest CVS snapshot from 2006/07/18
  - updated fd config patch
  - enabled epoll
  - fixed release format (#197405)
  - enabled WCCPv2 support (#198642)


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE12-2
changelog:
  - rewriten patch squid-2.5.STABLE10-64bit.patch, it works with
    "--with-large-files" option now
  - fix for #72896 - squid does not support > 1024 file descriptors,
    new "--enable-fd-config" option for it.


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE11-5
changelog:
  - fix for #171213 - CVE-2005-3258 Squid crash due to malformed FTP response
  - more fixes from upstream


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE10-3
changelog:
  - removed "--enable-truncate" option (#165948)
  - added "--enable-cache-digests" option (#102134)
  - added "--enable-ident-lookups" option (#161640)
  - some clean up (#165949)


author: Martin Stransky <stransky@redhat.com> 7:2.5.STABLE10-1
changelog:
  - new upstream version
  - enabled fakeauth utility (#154020)
  - enabled digest authentication scheme (#155882)
  - all error pages marked as config (#127836)
  - patch for 64bit statvfs interface (#153274)
  - added httpd config file for cachemgr.cgi (#112725)


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE9-6
changelog:
  - More upstream patches, including a fix for
    bz#157456 CAN-2005-1519 DNS lookups unreliable on untrusted networks


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE9-4
changelog:
  - More upstream patches, including the fixed 2GB patch.
  - include the -libbind patch, which prevents squid from using the optional
    -lbind library, even if it's installed.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE8-2
changelog:
  - new upstream version with 4 upstream patches.
  - Reorganize spec file to apply upstream patches first


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-4
changelog:
  - Include two more upstream patches for security vulns:
    bz#146783 Correct handling of oversized reply headers
    bz#146778 CAN-2005-0211 Buffer overflow in WCCP recvfrom() call


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-2
changelog:
  - Add a triggerin on samba-common to make /var/cache/samba/winbindd_privileged
    accessable so that ntlm_auth will work.  It needs to be in this rpm,
    because the Samba RPM can't assume the squid user exists.
    Note that this will only work if the Samba RPM is recent enough to create
    that directory at install time instead of at winbindd startup time.
    That should be samba-common-3.0.0-15 or later.
    This fixes bugzilla #103726
  - Clean up extra whitespace in this spec file.
  - Add additional upstream patches. (Now 18 upstream patches).
  - patch #112 closes CAN-2005-0096 and CAN-2005-0097, remote DOS security holes.
  - patch #113 closes CAN-2005-0094, a remote buffer-overflow DOS security hole.
  - patch #114 closes CAN-2005-0095, a remote DOS security hole.
  - Remove the -nonbl (replaced by #104) and -close (replaced by #111) patches, since
    they're now fixed by upstream patches.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE7-1
changelog:
  - new upstream version, with 3 upstream patches.
    Updated the -build and -config patches
  - Include patch from Ulrich Drepper <frepper@redhat.com> to more
    intelligently close all file descriptors.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE6-3
changelog:
  - include patch from Ulrich Drepper <drepper@redhat.com> to stop
    problems with O_NONBLOCK.  This closes #136049


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE6-1
changelog:
  - New upstream version, with 32 upstream patches.
    This closes #133970, #133931, #131728, #128143, #126726

  - Change the permissions on /etc/squid/squid.conf to 640.  This closes
    bugzilla #125007


author: Jay Fenlason <fenlason@redhat.com> 7:2.5STABLE5-5
changelog:
  - Merge current upstream patches.
  - Fix the -pipe patch to have the correct name of the winbind pipe.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE5-2
changelog:
  - Include the first 10 upstream patches
  - Add a patch for the correct location of the winbindd pipe.  This closes
    bugzilla #107561
  - Remove the change to ssl_support.c from squid-2.5.STABLE3-build patch
    This closes #117851
  - Include /etc/pam.d/squid .  This closes #113404
  - Include a patch to close #111254 (assignment in assert)
  - Change squid.init to put output messages in /var/log/squid/squid.out
    This closes #104697
  - Only useradd the squid user if it doesn't already exist, and error out
    if the useradd fails.  This closes #118718.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE5-1
changelog:
  - New upstream version, obsoletes many patches.
  - Fix --datadir passed to configure.  Configure automatically adds /squid
    so we shouldn't.
  - Remove the problematic triggerpostun trigger, since is's broken, and FC2
    never shipped with that old version.
  - add %{?_smp_mflags} to make line.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE4-3
changelog:
  - Clean up the spec file to work on 64-bit platforms (use %{_libdir}
    instead of /usr/lib, etc)
  - Make the release number in the changelog section agree with reality.
  - use -fPIE rather than -fpie.  s390 fails with just -fpie


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Incorporate many upstream patches
  - Include many spec file changes from D.Johnson <dj@www.uk.linux.org>


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE4-1
changelog:
  - New upstream version.
  - Fix the Source: line in this spec file to point to the correct URL.
  - redo the -location patch to work with the new upstream version.


author: Jay Fenlason <fenlason@redhat.com> 7:2.5.STABLE3-0
changelog:
  - Spec file change to enable the nul storage module. bugzilla #74654
  - Upgrade to 2.5STABLE3 with current official patches.
  - Added --enable-auth="basic,ntlm": closes bugzilla #90145
  - Added --with-winbind-auth-challenge: closes bugzilla #78691
  - Added --enable-useragent-log and --enable-referer-log, closes
  - bugzilla #91884


author: Bill Nottingham <notting@redhat.com>
changelog:
  - 2.4.STABLE3 + patches
  - turn off HTCP at request of maintainers
  - leave SNMP enabled in the build, but disabled in the default config


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.4.STABLE1 + patches
  - enable some more configure options (#24981)
  - oops, ship /etc/sysconfig/squid


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix path references in QUICKSTART (#15114)
  - fix initscript translations (#24086)
  - fix shutdown logic (#24234), patch from <jos@xos.nl>
  - add /etc/sysconfig/squid for daemon options & shutdown timeouts
  - three more bugfixes from the Squid people
  - update FAQ.sgml
  - build and ship auth modules (#23611)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix init script again (#11699)
  - add --enable-delay-pools (#11695)
  - update to STABLE3
  - update FAQ


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix compliance with ftp RFCs
    (http://www.wu-ftpd.org/broken-clients.html)
  - Work around a bug in some versions of autoconf
  - BuildPrereq sgml-tools - we're using sgml2html


author: Bill Nottingham <notting@redhat.com>
changelog:
  - switch to using group squid
  - turn off icmp (insecure)
  - update to 2.2.DEVEL3
  - build FAQ docs from source


author: Bill Nottingham <notting@redhat.com>
changelog:
  - cache & log dirs shouldn't be world readable
  - remove preun script (leave logs & cache @ uninstall)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - updated the init script to use reconfigure option to restart squid instead
    of shutdown/restart (both safer and quicker)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - first build against glibc
  - patched out the use of setresuid(), which is available only on kernels
    2.1.44 and later


author: Matthias Saou <http://freshrpms.net/> 3.5.12-4
changelog:
  - Changed the plugin directory for mozilla to /usr/lib64/mozilla,
    as suggested by Matteo Corti.
  - Shortened the description.


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 0:1.0.1-0.fdr.2
changelog:
  - Integrate Michaels patch that fixes:
  - fix desktop files for fedora.us, adds buildreq desktop-file-utils
  - fix %install section for short-circuit installs


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.3.rc2
changelog:
  - exit if error during build or install
  - fix install errors hdspconf, hdspmixer, usx2yloader
  - Split package in alsa-tools and alsa-tools-firmware
  - Integrate more docs


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.2-2
changelog:
  - rename images-legal.txt to supertuxkart-images-legal.txt
  - add a changelog entry for the previous release (and this one)


author: Thomas Woerner <twoerner@redhat.com> 1.3.7-1
changelog:
  - new verison 1.3.7
  - iptc is not a public interface and therefore not installed anymore
  - dropped upstream secmark patch


author: Thomas Woerner <twoerner@redhat.com> 1.3.4-2
changelog:
  - fix for plugin problem: link with "gcc -shared" instead of "ld -shared" and 
    replace "_init" with "__attribute((constructor)) my_init"


author: Thomas Woerner <twoerner@redhat.com> 1.3.4-1
changelog:
  - new version 1.3.4
  - dropped free_opts patch (upstream fixed)
  - made libipq PIC (#158623)
  - additional configuration options for iptables startup script (#172929)
    Thanks to Jan Gruenwald for the patch
  - spec file cleanup (dropped linux_header define and usage)


author: Thomas Woerner <twoerner@redhat.com> 1.3.0-2
changelog:
  - Remove unnecessary explicit kernel dep (#146142)
  - Fixed out of bounds accesses (#131848): Thanks to Steve Grubb
    for the patch
  - Adapted iptables-config to reference to modprobe.conf (#150143)
  - Remove misleading message (#140154): Thanks to Ulrich Drepper
    for the patch


author: Thomas Woerner <twoerner@redhat.com> 1.2.11-3.1
changelog:
  - changed default behaviour for IPTABLES_STATUS_NUMERIC to "yes" (#129731)
  - modified config file to match this change and un-commented variables with
    default values


author: Thomas Woerner <twoerner@redhat.com> 1.2.9-1
changelog:
  - vew version 1.2.9
  - new config options in ipXtables-config:
    IPTABLES_MODULES_UNLOAD
  - more documentation in ipXtables-config
  - fix for netlink security issue in libipq (devel package)
  - print fix for libipt_icmp (#109546)


author: Thomas Woerner <twoerner@redhat.com> 1.2.8-13
changelog:
  - marked all messages in iptables init script for translation (#107462)
  - enabled devel package (#105884, #106101)
  - bumped build for fedora for libipt_recent.so (#106002)


author: Thomas Woerner <twoerner@redhat.com> 1.2.8-12.1
changelog:
  - fixed lost udp port range in ip6tables-save (#104484)
  - fixed non numeric multiport port output in ipXtables-savs


author: Thomas Woerner <twoerner@redhat.com> 1.2.8-6
changelog:
  - IPTABLES_SAVE_COUNTER defaults to no, now
  - install config file in /etc/sysconfig
  - exchange unload of ip_tables and ip_conntrack
  - fixed start function


author: Thomas Woerner <twoerner@redhat.com> 1.2.8-5
changelog:
  - new config option IPTABLES_SAVE_ON_RESTART
  - init script: new status, save and restart
  - fixes #44905, #65389, #80785, #82860, #91040, #91560 and #91374


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - remove check for very old kernel versions in init scripts
  - sync up both init scripts and remove some further ugly things
  - add some docu into rpm


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fixed iptables and ip6tables initscript output, based on #70511
  - check return status of all iptables calls, not just the last one
    in a 'for' loop.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.2.5-2
changelog:
  - Merge ip6tables improvements from Ian Prowell <iprowell@prowell.org>
    - Update URL (#59354)
  - Use /sbin/chkconfig rather than chkconfig in %postun script


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.2.4-1
changelog:
  - Update to 1.2.4 (various fixes, including security fixes; among others:
    - Fix init script (#31133)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Yet another initscript fix (#30173)
  - Fix the fixes; they fixed some issues but broke more important
    stuff :/ (#30176)


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fix bugzilla #25986 (initscript not marked as config file)
  - fix bugzilla #25962 (iptables-restore)
  - mv chkconfig --del from postun to preun


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 1.2
  - fix up ipv6 split
  - add init script
  - Move the plugins from /usr/lib/iptables to /lib/iptables.
    This needs to work before /usr is mounted...
  - Use -O1 on alpha (compiler bug)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - move iptables to /sbin.
  - excludearch alpha for now, not building there because of compiler bug(?)


author: Paul Howarth <paul@city-fan.org> - 1.0.5-3
changelog:
  - fix broken debuginfo packages by not stripping binaries (#192617)
  - cosmetic changes to spec file
  - add extra doc files AUTHORS ChangeLog NEWS README TODO
  - use full command paths for reproducible builds


author: Paul Howarth <paul@city-fan.org> - 1.0.2-1
changelog:
  - update to 1.0.2
  - add dist tag
  - add libgnomeui support as per upstream package (#161234, #163804)
  - add project desktop entry
  - desktop entry munging not needed


author: Phillip Compton <pcompton[AT]proteinmedia.com> 0.13-0.fdr.3
changelog:
  - Updated .desktop entry for new mime-type system.
  - Added post/postun update-desktop-database.
  - Removed files from old mime-type system.


author: Phillip Compton <pcompton[AT]proteinmedia.com> 0:0.10-0.fdr.2
changelog:
  - Enable feature diferention for shrike vs severn.
  - BuildReq aspell-devel for severn.
  - in bluefish.desktop: Terminal=0   =>  Terminal=false.
  - Source0 path updated.


author: Matthias Saou <matthias.saou@est.une.marmotte.net>
changelog:
  - Spec file cleanup for Red Hat 7.1.
  - Added a GNOME desktop entry.
  - Compiled with kgcc and reported the problems encountered with gcc 2.96.


author: Bo Forslund <bo.forslund@abc.se>
changelog:
  - fine tuning of the spec file
    - possible to build with all processors on smp machines
    - an entry for RedHats wmconfig


author: CW Zuckschwerdt <zany@triq.net>
changelog:
  - complete rewrite of spec file
    - relocateable on build-time
    - no privileges required while building
    - fix for install_location (should really be $(LIBDIR)/bluefish!)
    - included man, locale and lib into RPM (was seriously broken)


author: Chris Lea <chrislea@luciddesigns.com>
changelog:
  - added spec file. this is my third RPM that I've made a spec
      file for, so please be merciful if I've screwed something up

  - Initial RPM release. <version>


author: Akira TAGOH <tagoh@redhat.com> - 1.2.2-3
changelog:
  - Invoke autoheader. (#226390)
  - Fix no the number of candidates on the candidate window with focus out/in.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.2-1
changelog:
  - New upstream release.
    - removed unnecessary patches:
      - scim-anthy-libtool-export.patch
      - scim-anthy-fix-pending-state.patch
      - scim-anthy-dict-encoding.patch
  - scim-anthy-1.2.2-gettextize.patch: fix a build issue on the latest autotools.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-2
changelog:
  - scim-anthy-libtool-export.patch: fix a typo.
  - scim-anthy-fix-pending-state.patch: fix not composing roman character
    properly when any characters are still in pending queue after deleting.
    (#208074)
  - scim-anthy-dict-encoding.patch: revert the default dictionary encoding to
    EUC-JP.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-1
changelog:
  - New upstream release.
  - scim-anthy-1.0.0-pseudo-ascii*.patch: merged into upstream.
    removed from srpm.


author: Akira TAGOH <tagohr@edhat.com> - 1.0.0-4
changelog:
  - scim-anthy-1.0.0-pseudo-ascii.patch,
    scim-anthy-1.0.0-pseudo-ascii-insert-space.patch: applied to allow the ASCII
    characters with the capital letter without even turning off the IME. (#187721)


author: Akira TAGOH <tagoh@redhat.com> - 1.0.0-1
changelog:
  - New upstream release.
    - can input numerals when the candidate window doesn't appear. (#185934)
  - scim-anthy-symbol-style.patch: removed.
  - add Requires: gettext-devel
  - run aclocal and autoconf as well to regenerate Makefile properly.


author: Akira TAGOH <tagoh@redhat.com> - 0.9.0-3
changelog:
  - scim-anthy-symbol-style.patch: applied a backport patch from upstream CVS to
    add an UI for the symbol style. (#178400)


author: Jens Petersen <petersen@redhat.com> - 0.9.0-2
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - add scim-anthy-helper-moduledir.patch to tweak the helper module install dir,
    since scim.pc now returns moduledir with api-version
  - remove anthy-imengine-helper.la


author: Akira TAGOH <tagoh@redhat.com> - 0.8.0-2
changelog:
  - scim-anthy-wide-latin.diff: applied to fix a problem that the input character
    appears twice with the full size alphanumeric mode.


author: Akira TAGOH <tagoh@redhat.com> - 0.5.3-4
changelog:
  - Import into Core.
  - relying the file dependencies instead of the explicit package dependency
    of anthy since anthy-libs was gone.
  - clean up the spec file.


author: Ryo Dairiki <ryo-dairiki@mbm.nifty.com>
changelog:
  - add xinput.d alternatives setup in %post and %postun
  - provide scim-ja_JP and only uninstall xinput.d-ja_JP alternative if
    no scim-ja_JP left


author: Rex Dieter <rexdieter[AT]users.sf.net> 0.9.11-2
changelog:
  - revert to 0.9.11 (0.9.12 makes gnupg2 fail on x86_64) using Obsoletes
    to avoid Epoch or other ugly means.


author: Tim Waugh <twaugh@redhat.com> 3.1-28
changelog:
  - Fixed build root (bug #225706).
  - Build with SMP flags (bug #225706).
  - Use dist in release tag (bug #225706).
  - Fixed macros in changelog (bug #225706).
  - Preserve timestamps when using install (bug #225706).


author: Miloslav Trmac <mitr@redhat.com> - 3.1-21
changelog:
  - Don't just delete the original file when destination and current directory
    are on different filesystems (#65548, #123069, patch by James Antill)
  - Fix return type of StripDelimiter in dos2unix-3.1-safeconv.patch (#136148)


author: Mike A. Harris <mharris@redhat.com> 3.1-20
changelog:
  - Added dos2unix-3.1-manpage-update-57507.patch to fix manpage (#57507)
  - Added dos2unix-3.1-preserve-file-modes.patch to properly preserve file
    permissions (#91331,55183,112710,132145)


author: Elliot Lee <sopwith@redhat.com> 3.1-15
changelog:
  - Remove build dependency on perl, since perl BuildRequires: dos2unix,
    and there's no good reason not to just use sed here.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix bug #57700 (segfault)
  - Add the mac2unix symlink recommended in README
  - Fix compiler warnings


author: Remi Collet <Fedora@FamilleCollet.com> 1.0.6-3
changelog:
  - install Licence in prep
  - use new macros from /etc/rpm/macros.pear
  - own /usr/share/pear/Net
  - require php >= 4.3.0 (info from PHP_CompatInfo)


author: Remi Collet <Fedora@FamilleCollet.com> 1.0.6-2
changelog:
  - Require pear >= 1.4.9
  - bundle the v3.01 PHP LICENSE file
  - use --packagingroot (instead of -R)
  - check from install to check (as in php-pear)


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-4
changelog:
  - Made a better fix for the powerdown button which checks if g-p-m is running
  - Don't install sample.conf anymore, not needed


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-3
changelog:
  - Disable the automatic shutdown -h via powerdown button by default due to
    conflicts with gnome-power-manager


author: Miloslav Trmac <mitr@redhat.com> - 1.0.3-2
changelog:
  - Update to 1.0.3 (fixes #128834)
  - s/Copyright/License/
  - Add logrotate config file (#110677, from Michal Jaegermann)
  - Don't verify contents of /var/log/acpid (#125862)
  - Use $RPM_OPT_FLAGS
  - Fix and cleanup acpid-1.0.1-pm1.patch
  - Add condrestart to %postun


author: Tim Hockin <thockin@sun.com>
changelog:
  - Updated RPM spec with patch from sun for chkconfig on/off
    - Add Changelog, make 'make rpm' use it.


author: Tim Hockin <thockin@sun.com>
changelog:
  - Fixed logging bug - not appending to log (O_APPEND needed)
    - Fix 'make install' to not need root access
    - Fix RPM spec to not need root


author: Steven Pritchard <steve@kspei.com> 0.03-2
changelog:
  - Fix License tag.
  - Don't generate COPYING and Artistic so we can re-enable "make test".
  - Remove debug*.list so "make test" doesn't fail.


author: Wart <wart at kobold.org> 0.2.4-2
changelog:
  - Added Requires: pkgconfig to -devel subpackage
  - Remove BR: pkgconfig as it will be provided by wfmath-devel
  - added smp_mflags to 'make check'


author: Rex Dieter <rexdieter[AT]users.sf.net> 1.4.1-7
changelog:
  - use serverpipe "~/.lyx/lyxpipe" instead, that was the old default
    and what pybibliographer expects.


author: Rex Dieter <rexdieter[AT]users.sf.net> 1.4.1-6
changelog:
  - set defaults for (see /usr/share/lyx/lyxrc.defaults.custom)
    screen_font_roman "Serif"
    screen_font_sans "Sans"
    screen_font_typewriter "Monospace"
    screen_zoom 100
    serverpipe "~/.lyx/pipe"
    (bug #192253)


author: Rex Dieter <rexdieter[AT]users.sf.net> 1.4.0-0.11.pre6
changelog:
  - 1.4.0pre6
  - --disable-stdlib-debug --disable-assertions --disable-concept-checks
  - don't use --without-included-boost (for now)


author: Rex Dieter <rexdieter[AT]usres.sf.net> 1.4.0-0.10.pre5
changelog:
  - gcc41 patch
  - document boost/gcc41 patches
  - avoid --without-included-boost on fc4/gcc-4.0.2 (gcc bug)


author: Rex Dieter <rexdieter[At]users.sf.net> 1.3.5-4
changelog:
  - qt_immodule patch (lyx bug #1830)
  - update -helpers patch to look-for/use evince (rh bug #143992)
  - drop (not-strictly-required) Req's on helper apps
    htmlview, gsview (rh bug #143992)
  - %configure: --with-aiksaurus
  - %configure: --enable-optimization="$$RPM_OPT_FLAGS"
  - %configure: --disable-dependency-tracking


author: Rex Dieter <rexdieter[At]users.sf.net> 0:1.3.5-3
changelog:
  - BR: htmlview 
  - Requires: htmlview, gsview (so build-time-detected helper apps are
    available at runtime)


author: Rex Dieter <rexdieter[At]users.sf.net> 0:1.3.5-0.fdr.3
changelog:
  - BR: htmlview
  - Requires: htmlview, gsview (so build-time-detected helper apps are 
    available at runtime)


author: Rex Dieter <rexdieter[At]users.sf.net> 0:1.3.5-0.fdr.2
changelog:
  - BR: pspell-devel -> aspell-devel
  - BR: tetex-* (helper detection, fonts)
  - -helpers patch: find/use htmlview, gsview, kdvi, ggv, kghostview
  - .desktop: GenericName: WYSIWYM document processor


author: Rex Dieter <rexdieter at sf.net> 0:1.3.4-0.fdr.4
changelog:
  - .desktop: separate file
  - .desktop: drop 'Utility' category, add 'Qt'
  - .desktop: Name: lyx -> LyX
  - .desktop: Comment: lyx 1.3.4 -> WYSIWYM document processor
  - convert icon xpm -> png


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.3-0.fdr.1
changelog:
  - Update to 1.3, patch naughty upstream Makefile.PL so that INSTALLDIRS= works.
  - Avoid RPATH on < FC2.


author: Chris Weyl <cweyl@alumni.drew.edu> 0.78-1
changelog:
  - update to 0.78
  - minor spec tweaks
  - bump version BR on PoCo::Client::Keepalive to 0.0901 (tests fail otherwise)
  - ...and add explicit requires on the above (the way POE loads its PoCo's irks
    me sometimes...)


author: Chris Weyl <cweyl@alumni.drew.edu>
changelog:
  - nixed t/10* due to mock build issues with reduced buildroot.  see BZ#202602.
    This fix does not warrant a rebuild.


author: Chitlesh Goorah <chitlesh [AT] fedoraproject DOT org> 20050622-4
changelog:
  - fixes for firefox icon on katapult
  - fixes for kontact icons
  - added support for kontact plugins icons


author: Matthias Clasen <mclasen@redhat.com> - 2.18.0-8
changelog:
  - Drop the explicit file requires on the themed lock 
    dialog, as it is provided by system-logos anyway
    and gnome-screensaver handles its absence just fine.


author: Matthias Clasen <mclasen@redhat.com> - 2.17.7-3
changelog:
  - Create ~/Pictures folder for new users, so the slideshow screensaver
    has a dropspot for screensavers


author: Ray Strode <rstrode@redhat.com> - 2.17.1-2
changelog:
  - temporarily revert smart card patches since they got
    broke in the switch to 2.17.1 and people can't login (bug
    212194)


author: Ray Strode <rstrode@redhat.com> - 2.16.0-13.fc7
changelog:
  - prefer smart card drivers found in system secmod db over the
    hardcoded /usr/lib/pkcs11/libcoolkeypk11.so


author: Ray Strode <rstrode@redhat.com> - 2.16.0-11.fc7
changelog:
  - have security token monitor helper process kill itself when 
    the communication pipe to the main process goes away (bug
    210677).


author: Ray Strode <rstrode@redhat.com> - 2.16.0-10.fc6
changelog:
  - report token events from helper process using token name instead
    of slot id and slot series number, since slot id and slot series
    number are relative to each process (bug 208018)


author: Ray Strode <rstrode@redhat.com> - 2.16.0-8.fc6
changelog:
  - handle PAM messages in a separate thread so that when a pam
    module blocks, the cancel button still works (bug 206322)
  - set cursor to busy while waiting on pam module (bug 202276)
  - hide prompt label/entry/unlock button until pam asks the user for input (bug 202276)
  - don't assume first pam message will be "Password:" (bug 201858, 202278)


author: Ray Strode <rstrode@redhat.com> - 2.15.4-6
changelog:
  - don't listen for smart card events unless session was
    initiated after smart card authentication.
  - update lock dialog UI in between individual pam messages


author: Ray Strode <rstrode@redhat.com> - 2.15.4-3
changelog:
  - only lock screen if screen locking is enabled and the token
    pulled out is a login token (requires uncommited changes to 
    pam_pkcs11).


author: Ray Strode <rstrode@redhat.com> - 2.13.5-4
changelog:
  - throttle cpu usage in floaters screensaver to allow things
    like background compiles to be faster (bug 178496).


author: Ray Strode <rstrode@redhat.com> - 0.0.23-1
changelog:
  - Update to 0.0.23
  - remove floaters screensaver engine patch (it's upstreamed)
  - keep fedora branded parts


author: Harald Hoyer <harald@redhat.com> - 106-3
changelog:
  - modprobe only on modalias (bug #238140)
  - make startup messages visible again
  - speedup boot process by not executing pam_console_apply while booting
  - Resolves: rhbz#238140


author: Harald Hoyer <harald@redhat.com> - 106-1
changelog:
  - version 106
  - specfile cleanup
  - removed pilot rule
  - removed dasd_id and dasd_id rule
  - provide static versions in a subpackage


author: Harald Hoyer <harald@redhat.com> - 104-2
changelog:
  - moved uinput to input subdirectory (rhbz#213854)
  - added USB floppy symlinks (rhbz#185171)
  - fixed ZIP drive handling (rhbz#223016)
  - Resolves: rhbz#213854,rhbz#185171,rhbz#223016


author: Harald Hoyer <harald@redhat.com> - 095-9
changelog:
  - improved error msg for firmware_helper (bug #206944)
  - added xpram symlink to slram device nodes (bug #205563)
  - removed infiniband rules (bug #206224)
  - use newest path_id script (bug #207139)


author: Harald Hoyer <harald@redhat.com> - 095-7
changelog:
  - added udevtimeout=<timeout in seconds>
    kernel command line parameters for start_udev 
    (default is to wait forever)


author: Harald Hoyer <harald@redhat.com> - 089-1
changelog:
  - version 089
  - do not force loading of parport_pc (bug #186850)
  - manually load snd-powermac (bug #176761)
  - added usb floppy symlink (bug #185171)
  - start_udev uses udevtrigger now instead of udevstart


author: Harald Hoyer <harald@redhat.com> - 084-9
changelog:
  - create non-enum device (cdrom, floppy, scanner, changer)
    for compatibility (random device wins)
    e.g. /dev/cdrom -> hdd /dev/cdrom-hdc -> hdc /dev/cdrom-hdd -> hdd


author: Harald Hoyer <harald@redhat.com> - 084-8
changelog:
  - fixed ZIP drive thrashing (bz #181041 #182601)
  - fixed enumeration (%e does not work anymore) (bz #183288)


author: Peter Jones <pjones@redhat.com> - 084-7
changelog:
  - Don't start udevd in %post unless it's already running
  - Stop udevd before chkconfig --del in %preun


author: Harald Hoyer <harald@redhat.com> - 084-4
changelog:
  - fixed group issue with vol_id (bz #181432)
  - fixed dvb permissions (bz #179993)
  - added support for scsi media changer (bz #181911)
  - fixed pktcdvd device creation (bz #161268)


author: Harald Hoyer <harald@redhat.com> - 078-4
changelog:
  - removed group "video" from the rules
  - fixed specfile
  - load nvram, floppy, parport and lp modules in
    /etc/sysconfig/modules/udev-stw.modules until there 
    is a better solution
  - fixed more floppy module loading


author: Harald Hoyer <harald@redhat.com> - 077-2
changelog:
  - switched back to udevstart and use active /dev/.udev/queue waiting 
    in start_udev
  - removed support for old kernels
  - refined some udev.rules


author: Harald Hoyer <harald@redhat.com> - 075-2
changelog:
  - moved /etc/udev/scripts to /lib/udev
  - moved /etc/udev/devices to /lib/udev/devices
  - added new event replay for kernel >= 2.6.15
  - added usb devices
  - renamed cpu device to cpuid (bug #161538)
  - changed vendor string "Onstream" to "On[sS]tream" (bug #173043)
  - compiled all *_id programs statically


author: Bill Nottingham <notting@redhat.com> - 062-2
changelog:
  - update to 062
  - use included ata_id, build usb_id
  - load modules for pci, usb, pcmcia
  - ship RELEASE-NOTES in %doc


author: Harald Hoyer <harald@redhat.com> - 056-1
changelog:
  - updated to version 056
  - merged permissions in the rules file
  - added udevpermconv.sh to convert old permission files


author: Harald Hoyer <harald@redhat.com> - 050-6
changelog:
  - introducing /etc/udev/makedev.d/50-udev.nodes
  - glibcstatic patch modified to let gcc4 compile udev


author: Harald Hoyer <harald@redhat.com> - 048-2
changelog:
  - fixed a case where reading /proc/ide/hd?/media returns EIO
    (bug rh#142713)
  - changed all device node permissions of group "disk" to 0640 
    (bug rh#110197)
  - remove $udev_db with -fr in case of a directory (bug rh#142962)


author: Harald Hoyer <harald@redhat.com> - 039-6.FC3.1
changelog:
  - speed up pam_console.dev
  - mount pts and shm, in case of the dev trigger
  - increased timeout for udevstart
  - removed syslog() from signal handler (caused vmware locks)
  - turned off logging, which speeds up the boot process


author: Harald Hoyer <harald@redhat.com> - 039-5
changelog:
  - added udev-039-norm.patch, which prevents removal of hd* devices,
    because the kernel sends remove/add events, if an IDE removable device
    is close(2)ed. mke2fs, e.g. would fail in this case.


author: Harald Hoyer <harald@redhat.com> - 039-4
changelog:
  - do not call dev.d scripts, if network interface hasn't changed 
    the name
  - correct wait for dummy network devices
  - removed NONBLOCK from volume-id
  - do not log in udev.static, which should fix bug 136005


author: Harald Hoyer <harald@redhat.com> - 039-2
changelog:
  - improved wait_for_sysfs for virtual consoles with Kay Siever's patch
  - wait for ppp class
  - wait for LVM dm- devices
  - integrate wait_for_sys in udev.static for the initrd


author: Harald Hoyer <harald@redhat.com> - 039-1
changelog:
  - version 039, fixes also manpage bug 135996 
  - fixed glibc issue for static version (getgrnam, getpwnam) (bug 136005)
  - close the syslog in every app


author: Harald Hoyer <harald@redhat.com> - 038-2
changelog:
  - par[0-9] is now a symlink to lp
  - MAKEDEV the parport devices
  - now conflicts with older initscripts


author: Harald Hoyer <harald@redhat.com> - 035-1
changelog:
  - version 035, which only improves wait_for_sysfs
  - load ide modules in start_udev, until a hotplug script is available
    (bug 135260)


author: Harald Hoyer <harald@redhat.com> - 034-3
changelog:
  - removed scary error messages from wait_for_sysfs
  - symlink from nst? -> tape?
  - kill udevd on update


author: Harald Hoyer <harald@redhat.com> - 034-1
changelog:
  - new version udev-034
  - removed patches, which went upstream
  - pam_console.dev link renamed to 05-pam_console.dev
  - MAKEDEV.dev links renamed to 10-MAKEDEV.dev


author: Harald Hoyer <harald@redhat.com> - 032-10
changelog:
  - added floppy madness (bug 134830)
  - replay scsi events in start_udev for the devices on the adapter (bug 130746)


author: Harald Hoyer <harald@redhat.com> - 032-9
changelog:
  - obsoleted $UDEV_LOG, use udev_log
  - correct SYMLINK handling in pam_console.dev
  - specfile cleanup
  - added check-cdrom.sh for nice cdrom symlinks


author: Harald Hoyer <harald@redhat.com> - 032-8
changelog:
  - added patches from Féliciano Matias for multiple symlinks (bug 134477 and 134478)
  - corrected some permissions with a missing leading 0
  - added z90crypt to the permissions file (bug 134448)
  - corrected requires and conflicts tags
  - removed /dev/log from MAKEDEV creation


author: Harald Hoyer <harald@redhat.com> - 032-4
changelog:
  - made /etc/udev/devices/ for manual device nodes
  - refined SELINUX check, if /dev is not yet mounted in start_dev


author: Harald Hoyer <harald@redhat.com> - 032-3
changelog:
  - corrected permissions for /dev/rtc (bug 133636)
  - renamed device-mapper to mapper/control (bug 133688)


author: Harald Hoyer <harald@redhat.com> - 030-27
changelog:
  - simplified udev.conf
  - refined close_on_exec patch
  - added pam_console supply for symlinks, now gives correct permissions,
    for e.g. later plugged in cdroms
  - renamed sr? to scd? (see devices.txt; k3b likes that :)


author: Jeremy Katz <katzj@redhat.com> - 030-26
changelog:
  - require a 2.6 kernel
  - prereq instead of requires MAKEDEV
  - obsolete and provide dev
  - add a trigger for the removal of /dev so that we set things up


author: Harald Hoyer <harald@redhat.com> - 030-21
changelog:
  - applied enumeration patch from David Zeuthen for cdrom symlinks (bug 131532)
  - create /dev/ppp in start_udev (bug 131114)
  - removed nvidia devices from start_udev
  - check for restorecon presence in start_udev (bug 131904)


author: Harald Hoyer <harald@redhat.com> - 030-16
changelog:
  - moved %{_sysconfdir}/hotplug.d/default/udev.hotplug to %{_sysconfdir}/hotplug.d/default/10-udev.hotplug


author: Harald Hoyer <harald@redhat.com> - 030-15
changelog:
  - added nvidia devices to start_udev
  - added UDEV_RAMFS for backwards compat to udev.conf
  - changed Group (bug 131488)
  - added libselinux-devel to build requirements


author: Jeremy Katz <katzj@redhat.com> - 030-11
changelog:
  - use tmpfs instead of ramfs (it has xattr support now)
  - change variables appropriately to TMPFS intead of RAMFS in udev.conf
  - create loopN, not just loop in start_udev


author: Harald Hoyer <harald@redhat.com> - 030-8
changelog:
  - changed defaults not to remove device nodes
  - added rule for net/tun
  - extended start_udev to create devices, which can trigger module autoloading
  - refined cloexec patch, to redirect stdin,out,err of /dev.d execed apps to /dev/null


author: Harald Hoyer <harald@redhat.com> - 030-7
changelog:
  - removed usage of /usr/bin/seq in start_udev
  - set correct permissions in start_udev
  - extended the cloexec patch
  - removed udev-persistent package (define with_persistent==0)
  - check for /var/run/console/console.lock before calling /sbin/pam_console_setowner
  - linked pam_console_setowner statically against libglib-2.0.a


author: Harald Hoyer <harald@redhat.com> - 029-3
changelog:
  - put /etc/sysconfig/udev in /etc/udev/udev.conf and removed it
  - made only udev.static static
  - make our defaults the default values
  - removed /udev


author: Harald Hoyer <harald@redhat.com> - 026-2
changelog:
  - udev-026
  - preserve ownership of device nodes, which already exist
  - do not remove device nodes if UDEV_REMOVE="no"
  - added volume_id
  - build with klibc


author: Greg Kroah-Hartman <greg@kroah.com>
changelog:
  - add some more files to the documentation directory
  - add ability to build scsi_id and make it the default


author: Greg Kroah-Hartman <greg@kroah.com>
changelog:
  - fix up udevd build, as it's no longer needed to be build seperatly
  - add udevtest to list of files
  - more Red Hat sync ups.


author: Greg Kroah-Hartman <greg@kroah.com>
changelog:
  - add udevsend, and udevd to the files
  - add ability to build udevd with glibc after the rest is build with klibc


author: Robert Love <rml@tech9.net>
changelog:
  - Make work without a build root
  - Correctly install the right files
  - Pass the RPM_OPT_FLAGS to gcc so we can build per the build policy
  - Put some prereqs in
  - Install the hotplug symlink to udev


author: Matthias Saou <http://freshrpms.net> 1.3-5
changelog:
  - Don't mark the LICENSE in /lib/firmware as %doc since it could be excluded
    when using --excludedocs, symlink a file in %doc to it instead.


author: Matthias Saou <http://freshrpms.net> 1.3-3
changelog:
  - Move the LICENSE as LICENSE.ipw2100 in the firmware directory to fully
    comply to the Intel redistribution terms and conditions.


author: Matthias Saou <http://freshrpms.net> 1.3-2
changelog:
  - Convert spec file to UTF-8.
  - Remove all symlinks to keep only /lib/firmware like in ipw2200-firmware.


author: Karsten Hopp <karsten@redhat.de> 0.1.9-2
changelog:
  - add BuildRequires  libgnome-devel libgnomeui-devel
    gtk2-devel mono-devel libjpeg-devel sqlite-devel


author: Patrice Dumas <pertusus@free.fr> 0.5.1-6
changelog:
  - add temporarily a BuildRequires: openssl-devel to workaround missing 
    Requires: of libesmtp-devel (#166844)


author: Tim Waugh <twaugh@redhat.com> 2.17-20
changelog:
  - Fixed mandir in fhs patch (bug #226411).
  - Don't run strip (bug #226411).
  - Fixed readme patch to talk about Fedora not Red Hat Linux (bug #226411).
  - Fixed build root tag (bug #226411).
  - Use SMP make flags (bug #226411).
  - Avoid %makeinstall (bug #226411).
  - Fixed summary (bug #226411).


author: Tim Waugh <twaugh@redhat.com> 2.17-5
changelog:
  - Fix init script (bug #52862).
  - Avoid temporary file vulnerability in init script.
  - Update README: it's --add, not -add.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - pulled into distribution
  - used setserial-2.12_CTI.tgz instead of setserial-2.12.tar.gz (former is
    all that sunsite has) - not sure what the difference is.


author: Christian 'Dr. Disk' Hechelmann <drdisk@ds9.au.s.shuttle.de>
changelog:
  - added %attr's
  - added sanity check for RPM_BUILD_ROOT
  - setserial is now installed into /bin, where util-linux puts it and all
    startup scripts expect it.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.3.1-3
changelog:
  - Patch PGP/MIME signed message compose, so it doesn't strip off
    whitespace of the "-- " body signature delimiter. It's upstream
    preference that it still does that for ISO 2022 JP to be compatible
    with a few broken MUAs that have problems with QP encoding.
  - Remove .desktop categories "Application" and "X-Fedora".


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.3.1-2
changelog:
  - Patch APOP vulnerability (CVE-2007-1558) as in 2.4.0.
  - Patch default directory for SSL/TLS certificates.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.2.6-4
changelog:
  - Enable OpenLDAP support as requested by several users.
  - Drop minimal version from GPGME build requirement
    (it's superfluous in our environments).


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.2.6-2
changelog:
  - Adapt upstream's patch to prevent a crash when switching folders
    (sylpheed-2.2.6-summaryview-crash.patch).


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 2.0.0-0.2.beta3
changelog:
  - temporarily add BR libpng-devel to work around a broken cairo-devel
    package, which is pulled in and breaks the pkg-config dependency
    chain (#161688)


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 1.0.3-1
changelog:
  - Update to 1.0.3.
  - Enable support for GPGME 1.0 and compface.
  - Apply common spec cleanup. Make desktop file UTF-8.


author: Akira TAGOH <tagoh@redhat.com> - 1.0.0-0.1.beta3
changelog:
  - New upstream release.
  - sylpheed-default-browser.patch: updated to apply cleanly.
  - sylpheed.1: added a simple man page. (#129387)


author: Akira TAGOH <tagoh@redhat.com> 0.9.10-2
changelog:
  - sylpheed-default-browser.patch: applied to change the default browser to
    gnome-open. (#119007, Michael Schwendt)


author: Akira TAGOH <tagoh@redhat.com> 0.9.8a-3
changelog:
  - don't strip the binary. Thanks to Michael Schwendt
  - use upstream's icon for the desktop file.
  - install the desktop file using desktop-install-file


author: Akira TAGOH <tagoh@redhat.com> 0.9.8a-2
changelog:
  - add _with_gpgme to build enabled gpgme support.
    NOTE: it's disabled as default. just define _with_gpgme to enable it.


author: Akira TAGOH <tagoh@redhat.com> 0.8.9-3
changelog:
  - enabled ssl support.
  - sylpheed-0.8.9-ssl.patch: applied to fix the include path and links the correct libraries.


author: Tim Powers <timp@redhat.com>
changelog:
  - update to 0.4.4
  - built for Powertools 7.1
  - quiet setup
  - minor specfile cleanup
  - snipped some of the really old changelog, was very very long
  - include the manual in the file list
  - use %configure and %makeinstall as well as other predefined RPM
    macros whenever possible


author: Chris Wright <chrisw@osdl.org> 0.11.3-1
changelog:
  - Add openssl patch from Dan Holmsand <holmsand@gmail.com>
  - Add cg-Xlib patch to fix showdate output
  - Update %files with changes inspired by Neil Horman <nhorman@redhat.com>


author: Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
changelog:
  4.13.0-1
  - version upgrade
  - exclude libicq2000 headers (may conflict with libicq2000-devel)
  - drop GCC 3.4 patch (not needed anymore)


author: Jakub Jelinek <jakub@redhat.com> 0.3.10-1
changelog:
  - MIPS support (Richard Sandiford)
  - don't leave temporary files behind on prelink --verify failures (#199251)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-4
changelog:
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-23
changelog:
  - when updating dynamic tags for executable after section reshuffling,
    check section type as well, so that 0 sized sections don't get the
    tags attached instead of the proper ones
  - when an address space conflict is found between libraries for the same
    executable during layouting, check properly for all remaining conflicts
    as well


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-22
changelog:
  - don't adjust DT_REL{,A} if it is 0
  - allow prelinking of libraries with no dependencies
  - fix handling of libraries with no lazy relocs, no normal relocs or no
    relocs at all
  - some new tests
  - fix SH (Daniel Jacobowitz)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-20
changelog:
  - ppc TLS
  - some ppc64 work
  - avoid using trampolines for nested functions
  - fix typo in prelink man page (#89247)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-18
changelog:
  - fix section indices in .symtab if non-alloced sections weren't
    originally monotonically increasing
  - s390, s390x and Alpha TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-13
changelog:
  - use ELF_F_PERMISSIVE if defined
  - be permissive even when doing --reloc-only
  - fix up .plt section sh_entsize on Alpha


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-11
changelog:
  - make it work with elfutils instead of libelf 0.[78]
  - update to newer auto*/libtool
  - some more steps towards TLS support, at least --reloc-only should work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-9
changelog:
  - enable on ppc and x86_64
  - fix ppc far PLT slot prelink
  - support --undo on ppc
  - for bug-compatibility with some unnamed OS changed R_SPARC_RELATIVE
    --undo
  - tiny steps towards TLS support on IA-32, more will come


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-8
changelog:
  - avoid putting garbage into executable's .gnu.liblist sh_link
    if we did not have to grow .dynstr
  - don't segfault on bogus sh_link and sh_info values (#72705)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-7
changelog:
  - when growing allocated shared lib sections (for REL->RELA
    conversion), make sure !PF_W and PF_W segments don't end up
    on the same page
  - when finding space for sections in an executable, make sure
    it is not included in between two reloc sections
  - for non-zero SHN_ABS symbols on 32-bit arches mask high
    32-bits of st_value (libelf 0.8.x is strict here)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-1
changelog:
  - added --undo and --verify mode
  - new architectures s390, s390x, arm, sh
  - handle binaries/shared libraries with non-allocated sections
    without monotonically increasing sh_offsets
  - handle .sbss and .sdynbss
  - fixed a bug in 64-bit LE/BE read routines
  - removed .rel{,a}.dyn reloc conversion/sorting, it was duplicating
    ld's -z combreloc and complicated lots of things
  - fixed STB_LOCAL/STT_SECTION symbol adjusting
  - use mkstemp for temporary files, allow --verify for binaries/libs
    on read-only filesystems
  - added DWARF-2 .debug_ranges adjustement, special case GCC's
    "set base to 0 and make things absolute instead of relative" trick
  - allow arches to override default layout mechanism (for ppc)
  - added some new tests, test --undo and --verify modes in the testsuite
  - alpha: adjust what R_ALPHA_GLOB_DAT points to too
  - i386: apply _32 and _PC32 REL relocs, as apply_rel can be called
    for C++ optimizations before REL->RELA conversion
  - ppc: layout strategy to satisfy ppc lib location preferences
  - sparc64: handle R_SPARC_DISP64
  - x86-64: adjust what R_X86_64_RELATIVE points to too
  - link prelink statically, esp. because of --verify mode
  - run make check during build process


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-7
changelog:
  - fix layout code so that -R works
  - on IA-32, when there are no R_386_PC32 relocs and no R_386_32 relocs
    with non-zero addend (= memory content), don't convert REL->RELA,
    only switch R_386_32 relocs to R_386_GLOB_DAT
  - support creating a new PT_LOAD segment if necessary, if SHT_NOBITS
    sections are small, instead of adding new PT_LOAD segment just add file
    backing to those NOBITS sections
  - added testsuite
  - new supported architectures (Alpha including .mdebug section support,
    Sparc, Sparc 64-bit, X86_64 (the last one untested)), beginning of PPC
    support


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-5
changelog:
  - fix sorting of .rel*.dyn sections, so that all RELATIVE relocs really
    come first
  - when DT_RELCOUNT already exists and conversion REL->RELA is done,
    convert it into DT_RELACOUNT
  - set conflict lookupent and conflictent to 0 for undefineds
  - don't bother with DT_REL*COUNT for apps, they cannot have any RELATIVE
    relocs


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-4
changelog:
  - brown paper bag time: when determining if conversion from REL to RELA
    is needed, check all non-PLT rel sections, including last.
    This caused prelinking to fail with -z combreloc compiled libraries.


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-3
changelog:
  - don't use .gnu.reloc section, use .rel.dyn or .rela.dyn instead
  - put RELATIVE relocs first, not last, so that DT_REL{,A}COUNT
    works
  - put in updated glibc patch
  - no need for special binutils patch - all is done in the -z combreloc
    patchset


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-2
changelog:
  - use the new DT_GNU_CONFLICT/DT_GNU_LIBLIST/SHT_GNU_LIBLIST constants
  - unlink *.#prelink# files if necessary


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-1
changelog:
  - fix layout.c
  - create .gnu.prelink_undo section, --undo and --verify modes will use that
  - some more C++ specific optimizations


author: Jakub Jelinek <jakub@redhat.com> 0.1.2-1
changelog:
  - bail out early if ELF object does not have sh_offsets
    monotonically increasing
  - disallow prelinking if there are conflicts against read-only
    segments in shared libraries (ie. non-pic shared libraries
    - this is better than bailing out for all non-pic shared libraries)
  - add some C++ specific optimizations to reduce number of conflicts,
    more to come


author: Jakub Jelinek <jakub@redhat.com> 0.1.1-1
changelog:
  - relocate stabs and dwarf-2 debugging formats
  - support both --all and incremental prelinking
  - handle hardlinks
  - limit to libraries in /etc/prelink.conf directories or
    directories from command line


author: Christopher Stone <chris.stone@gmail.com> 0.7.2-1
changelog:
  - Initial Release of python-fpconst, changes from fpconst include:
  - Renamed package from fpconst to python-fpconst
  - Removed macros in URL
  - Removed python-devel from BR
  - Droped the second paragraph in %description
  - Droped PKG-INFO from %doc
  - Added pep-0754.txt to %doc


author: Damien Durand <splinux@fedoraproject.org> - 0.89-2
changelog:
  - Fix mixed-use-of-spaces-and-tabs in changelog
  - Add category Text and delete-original in desktop-file-install
  - Add intltool as BR


author: Christoph Wickert <fedora wickert acror de> - 0.1.2-2
changelog:
  - Removed broken-icon.patch (using sed instead).
  - Removed hardcoded /usr from makefile.config-patch.
  - Minor specfile changes (#168608).


author: Tim Waugh <twaugh@redhat.com> 1.5.0-6
changelog:
  - Preserve timestamps on install (bug #226503).
  - Added SMP flags (bug #226503).
  - Removed Prefix: tag (bug #226503).
  - Removed bogus mkdir call (bug #226503).
  - Ship the LICENSE file (bug #226503).
  - Fixed summary (bug #226503).


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.05-1
changelog:
  - Revert to building with ExtUtils::MakeMaker to eliminate a build
    dependency loop with Module::Build.


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.2.1-2
changelog:
  - applied suggestions from Kevin Fenzi
   - name changed from python-xattr to pyxattr
   - corrected path to the source file


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.2.1-1
changelog:
  - updated to 0.2.1
   - added python-devel in BuildRequires
   - added more doc files
   - added Provides section
   - modified to Fedora Extras requirements


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 1.2.4.1-0.2
changelog:
  - removed '%config' from the app-defaultsdir
  - do not own the app-defaultsdir anymore
  - added some tricks to the -random patch to avoid removal of the
    clear-the-passphrase-memset() during optimization


author: Phil Knirsch <pknirsch@redhat.com> 1.5.3.1-4
changelog:
  - Fixed dependancy problem on /usr/bin/rc by removing acleandir.[1|rc] (#67243)
  - Fixed missing /usr/share/netatalk dir (#67222)


author: Phil Knirsch <pknirsch@redhat.com> 1.5.2-3
changelog:
  - Fixed initscript to use correct config files from /etc/atalk (#62803)
  - Changed initscript to use $0 instead of direct string (#61734)
  - Change Copyright to Licencse and switch from BSD to GPL (#61746)


author: Than Ngo <than@redhat.com>
changelog:
  - update to 1.5pre2 (bug #19737, #20397)
  - update Url and ftp site
  - clean up specfile
  - netatalk-1.4b2+asun obsolete


author: Than Ngo <than@redhat.de>
changelog:
  - /etc/rc.d/init.d -> /etc/init.d
  - add condrestart directive
  - fix post/preun/postun scripts
  - prereq initscripts >= 5.20


author: Tim Powers <timp@redhat.com>
changelog:
  - renewed source so it is pristine, delete the problematic files in spec file
  	instead
  - general spec file cleanups, create buildroot and dirs in the %install
  	section
  - strip binaries
  - gzip man pages
  - fixed netatalk-asun.librpcsvc.patch, -lnss_nis too
  - changed group
  - added %defattr to %files section


author: iNOUE Koich! <inoue@ma.ns.musashi-tech.ac.jp>
changelog:
  - Correct librpcsvc.patch.  Move %changelog section last.
    Uncomment again -DNEED_QUOTA_WRAPPER in sys/linux/Makefile since
    LinuxPPC may need.


author: iNOUE Koich! <inoue@ma.ns.musashi-tech.ac.jp>
changelog:
  - Correct symbolic links to psf.
    Remove asciize function from nbplkup so as to display Japanese hostname.


author: iNOUE Koich! <inoue@ma.ns.musashi-tech.ac.jp>
changelog:
  - Included MacPerl 5 script ICDumpSuffixMap which dumps suffix mapping
    containd in Internet Config Preference.


author: INOUE Koichi <inoue@ma.ns.musashi-tech.ac.jp>
changelog:
  - Use modified sources 1.4b2+asun2.1.0 produced by Adrian Sun
    <asun@saul9.u.washington.edu> to provide an AppleShareIP file server
  - Included AppleVolumes.system file maintained by Johnson
    <johnson@stpt.usf.edu>


author: David Gibson <D.Gibson@student.anu.edu.au>
changelog:
  - Used a buildroot
  - Use RPM_OPT_FLAGS
  - Moved configuration parameters/files from atalk.init to /etc/atalk
  - Separated devel package
  - Built with shared libraries


author: Paul H. Hargrove <hargrove@sccm.Stanford.EDU>
changelog:
  - Updated sources from 1.3.3 to 1.4b2
  - Included endian patch for Linux/SPARC
  - Use all the configuration files supplied in the source.  This has the
    following advantages over the ones in the previous rpm release:
  	+ The printer 'lp' isn't automatically placed in papd.conf
  	+ The default file conversion is binary rather than text.
  - Automatically add and remove DDP services from /etc/services
  - Placed the recommended /etc/services in the documentation
  - Changed atalk.init to give daemons a soft kill
  - Changed atalk.init to make configuration easier


author: Laurent Rineau <laurent.rineau__fedora_extras@normalesup.org> - 0.9.2-1
changelog:
  - New upstream release 0.9.2.
  - Unorphaned for FE-6 and rawhide. New maintainer. Review request #217180
  - New spec file.
  - Header are know in %{_includedir} instead of %{_includedir}/wbxml2
  - New licence.


author: Roozbeh Pournader <roozbeh@farsiweb.info> - 0.04-2
changelog:
  - Packaging improvements (use more proper license tag, use tarball
    with preserved timestamp, remove direct BuildRequires on perl, expand
    description, enable pod tests) by Bernard Johnson


author: Tim Waugh <twaugh@redhat.com> 1.6-2
changelog:
  - New archive from Sebastian.
  - Run fmtutil in %post and %postun.
  - Require new xmltex.
  - Fix body-start().


author: PLD Team <pld-list@pld.org.pl>
changelog:
  All persons listed below can be reached at <cvs_login>@pld.org.pl

  $Log: passivetex.spec,v $
  Revision 1.8  2001/08/21 10:12:42  wrobell
  - ver. 1.6
  - stb

  Revision 1.7  2001/03/27 16:55:44  wiget
  Requires xmltex

  Revision 1.6  2001/03/27 16:53:29  wiget
  changed Source URL, updated to 1.5 version, more files in package; now passivetex is more powerfull and work ;-)

  Revision 1.5  2001/01/27 03:25:36  kloczek
  - added tetex to Prerq,
  - simplified %post, %postun.

  Revision 1.4  2001/01/27 00:08:39  klakier
  - added URL

  Revision 1.3  2001/01/27 00:07:47  klakier
  - added URL

  Revision 1.2  2001/01/24 12:41:17  klakier
  - small fixes

  Revision 1.1  2001/01/24 12:31:43  klakier
  - initial


author: Peter Vrabec <pvrabec@redhat.com> 1.07-10
changelog:
  - revert fix from 1.07-9
  - fix truncation of values on 32b platforms where statvfs64
    is being called on a large file system (#153259)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - build against lockdev-1.0.0-14, with
  -   swap egid and gid for lockdev's access(2) device check (#52029).
  - add (noreplace) to all config files.


author: Jeff Johnson <jbj@redhta.com>
changelog:
  - move per-system lock to 755 uucp.uucp /var/lock/uucp directory.
  - use baudboy.h to create per-device lock(s) in /var/lock.
  - comment out compress/strip, rely on rpm brp-* scripts.
  - check uuxqt arguments more carefully.


author: Florian La Roche <Florian.LaRoche@redhat.com>
changelog:
  - change perms to be root:root for the config files and
    0640,root:uucp for config files containing passwords
  - add patch from #6151 (division by zero, SIGFPE)
  - make %post work also for simple sh-versions


author: Erik Troan <ewt@redhat.com>
changelog:
  - Brian Candler fixed /usr/lib/uucp/uucico symlink
  - Added "create" entries to log file rotation configuration
  - Touch log files on install if they don't already exist to allow proper
    rotation


author: Erik Troan <ewt@redhat.com>
changelog:
  - symlinked /usr/sbin//uucico into /usr/lib/uucp
  - (all of these changes are from Brian Candler <B.Candler@pobox.com>)
  - sgid bit added on uucico so it can create lock files
  - log files moved to /var/log/uucp/ owned by uucp (so uucico can create them)
  - log rotation added
  - uses /etc/uucp/oldconfig instead of /usr/lib/uucp for old config files
  - package creates /etc/uucp and /etc/uucp/oldconfig directories
  - man pages reference the correct locations for spool and config files


author: Michael Rice <errr@errr-online.com> - 0.5.9-3
changelog:
  - add proper Requires per wiki guidelines
  - add provides per wiki guidelines
  - add -q into setup per bugzilla request 209965
  - Change license to ruby license per bugzilla 209965
  - Remove the conditional stuff since its not possible to build for older ruby in
    extras


author: Michael Rice <errr@errr-online.com> - 0.5.9-2
changelog:
  - add smp_mflags to make line
  - remove find command and replace with list instead
  - add ruby_sitesearch for bdb.so
  - remove strip to create a debug package


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fixed package rename problems (bug #223023).
  - Fixed requires tags (bug #223023).
  - Require emacs (bug #223023).
  - Better url tag (bug #223023).


author: Paul F. Johnson <paul@all-the-johnsons.co.uk> - 0.3.3-1.2
changelog:
  - Many alterations to bring the spec into line with the rules
  - removed *.la files, changes to rpm name and changed to 
    CFLAGS="${CFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=i686-redhat-linux-gnu --host=i686-redhat-linux-gnu \
  	--target=i386-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info


author: Jeremy Hinegardner <jeremy@hinegardner.org> - 5.19-3
changelog:
  - replace RPM_BUILD_ROOT in spec file with buildroot macro
  - cleanup rpmlint errors for the src.rpm
  - add ragel(1) man page patch


author: Soren Sandmann <sandmann@redhat.com> 7.1-6.fc6
changelog:
  - Don't install xprint headers, as they are being moved to the libXp 
    package instead. Bug 175350.


author: Mike A. Harris <mharris@redhat.com> 7.1-5.fc6
changelog:
  - Don't install LBX protocol headers, as LBX is obsoleted in the 7.1 release
    and no longer supported.


author: Kristian Høgsberg <krh@redhat.com> 7.0-2
changelog:
  - Add glproto-texture-from-drawable.patch to add opcodes and tokens
    for GLX_texture_from_drawable extension.


author: Mike A. Harris <mharris@redhat.com> 7.0-1
changelog:
  - Update to damageproto-1.0.3, glproto-1.4.3, xf86driproto-2.0.2 from the
    X11R7.0 final release.
  - Bump package version to 7.0 to match the X11R7 version, for no particularly
    strong reason other than "it feels good".


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - This package contains only C header files and pkg-config *.pc files,
    and does not contain any ELF binaries or DSOs, so we disable debuginfo
    generation.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Update all tarballs to X11R7 RC1 release.
  - Remove panoramixproto, as it is now known as xineramaproto.
  - Remove glu.h and glx.h from file manifest, as they're provided by Mesa.
  - Added {_includedir}/GL/internal/dri_interface.h to file manifest.


author: Mike A. Harris <mharris@redhat.com> 0.0.1-1
changelog:
  - Changed for loop in build section to use "ls -1" instead of find "*proto*"
    when going through protocol dirs, as "evieext" just *HAD* to be named
    something completely different from everything else, in true X.Org
    inconsistency fashion.
  - Added Conflicts with XFree86-devel and xorg-x11-devel.


author: Mike A. Harris <mharris@redhat.com> 0.0.1-0
changelog:
  - Initial build of xproto from X.Org modular CVS checkout and "make dist".
  - Since there are no upstream tarballs yet, and "make dist" generates
    a "7.0" non-beta final version, I changed the version to 0.0 as I've no
    idea what the intention is and want to avoid using Epoch later.


author: Paul Howarth <paul@city-fan.org> 2.110-3
changelog:
  - use search.cpan.org download URL
  - use full paths for all commands used in build
  - assume rpm knows about %check and %{perl_vendorlib}
  - cosmetic spec file changes


author: Elliot Lee <sopwith@redhat.com> 0.6.12-6
changelog:
  - tetex-dvips requirement should go on main package (not just pdf 
    subpackage) because docbook2ps requires dvips too.


author: Tim Waugh <twaugh@redhat.com> 0.6.10-2
changelog:
  - Don't define %graphic-default-extension% in the stylesheet---it messes
    up PS+PDF output from the same source.


author: Tim Waugh <twaugh@redhat.com> 0.6.10-1
changelog:
  - 0.6.10.
  - No longer need automake files.
  - No longer need '.', jw-custom, '@', pdf, nochunks, txt, '-o', manpage,
    sdata, help, ol, '-V', sgml_xml, excl, link, pagesize, or texinputs
    patches.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-21
changelog:
  - Edited the wrong file when making the patch.. fix breakage introduced
    by trying to fix bug #58375.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-20
changelog:
  - Fix docbook frontend (bug #51478).
  - Make the old db2html script understand the .xml filename extension
    (bug #59194).
  - Determine page size to use automatically from LC_PAPER (bug #58375).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-9
changelog:
  - Actually apply the patch that makes man backend understand &minus;.
  - Also don't redefine <comment> and <remark> for HTML output either.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-8
changelog:
  - Default stylesheet: <comment> and <remark> as rationale markers
    probably isn't really appropriate for general use.
  - Default stylesheet: larger top margin to make some RTF readers
    happy (bug #56011).
  - Make man backend understand &minus;.
  - Specfile cleanups (%{_bindir}, %{_docdir}).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-6
changelog:
  - Explicit synopsis for each docbook2[xxx] command in the jw man page.
  - Clean up all temporary files in pdf backend.


author: Tim Waugh <twaugh@redhat.com> 0.6.9-4
changelog:
  - Adjust stylesheet so that it works with docbook-dsssl 1.72.
  - Fix jw so that -o and -d can be used together (bug #53546).


author: Tim Waugh <twaugh@redhat.com> 0.6.9-3
changelog:
  - Fix txt backend so that it works.
  - Fix jw so that it uses the HTML stylesheet for text backends.
  - Use links if lynx isn't available, in txt backend.


author: Tim Waugh <twaugh@redhat.com> 0.6-14
changelog:
  - db2html: copy admon graphics to output directory (bug #40143).
  - Require docbook-style-dsssl 1.64-2 for symbolic link used by db2html.
  - db2html: handle arguments with spaces better.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix argument parsing in docbook2xxx (bug #31518).
  - Fix argument passing in db2html (bug #31520).
  - Fix pdf generation (bug #31524).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Only create output directory for db2html (bug #27092). (docbook2html
    does not create an output directory in the upstream version, but
    the compatibility script has been made to do so.)


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Use %{_mandir} and %{_prefix}.
  - db2* symlinks.
  - Obsolete stylesheets (and -db2pdf).
  - Change Copyright: to License:.
  - Remove Packager: line.
  - Reword description.


author: Dan Walsh <dwalsh@redhat.com> 1.25.2-1
changelog:
  - Update to NSA Release version
  	* Updated module report for removal of magic number fields
  	  from security structures (in 2.6.16).


author: Dan Walsh <dwalsh@redhat.com> 1.25.1-1
changelog:
  - Update to NSA Release version
  	* Updated inode hook section of module report for
  	  - change to inode classification logic
  	  - introduction of inode_init_security
  	  - removal of inode post hooks
  	  - generic VFS fallback for security xattrs
  	  - canonicalization of getxattr results
  	* Updated socket hook section of module report for
  	  - change to socket classification logic
  	  - name_connect check
  	* Updated file hook section of module report for
  	  - execheap and execstack checks


author: Dan Walsh <dwalsh@redhat.com> 1.22-1
changelog:
  - Update to NSA Release version
  	* Updated version for release.
  	* Updated CREDITS.
  	* Added README.MODULES.


author: Dan Walsh <dwalsh@redhat.com> 1.19.5-1
changelog:
  - Update to NSA Release version
  	* Added Ubuntu SELinux link to README.
  	* Updated README.MLS.
  	* Merged README.HIERARCHY from Tresys Technology.


author: Dan Walsh <dwalsh@redhat.com> 1.19.2-1
changelog:
  - Update to NSA Release version
  	* Merged top-level Makefile from Andreas Steinmetz.
  	* Updated README.MLS to reflect recent changes.


author: Dan Walsh <dwalsh@redhat.com> 1.17.6-1
changelog:
  - Upgrade to match NSA
  	* Further revs to socket and network hook sections of module report.
  	* Further revs to the policy report.
  	* Minor revs to the module report.
  	* Updated policy report.
  	* Updated IP network hook section of module report.
  	* Updated miscellaneous hook section of module report.
  	* Completed first pass update of module report.
  	* Updated inode hook section of the module report.
  	* Updated file hook section of the module report.
  	* Updated ipc hook section of the module report.
  	* Updated socket hook section of the module report.
  	* Removed obsolete sections of the module report.
  	* Updated CREDITS.
  	* Updated README.CONDITIONAL.
  	* Updated README.MLS.
  	* Updated README.
  	* Updated task hooks section of the module report.
  	* Updated bprm hooks section of the module report.
  	* Updated superblock hooks section of the module report.
  	* Updated CREDITS.
  	* Minor rev to the stacking section of the module report.


author: Dan Walsh <dwalsh@redhat.com> 1.15-2
changelog:
  - Upgrade to match NSA
  	* Updated CREDITS.
  	* Updated README.
  	* Merged SGML fixes from Manoj Srivastava.


author: Michel Salim <michel.salim[AT]gmail.com> - 0.1.15-5
changelog:
  - removed references to trademarked names
  - packaged modified tarball to prevent trademark infringement


author: Michel Salim <michel.salim[AT]gmail.com> - 0.1.15-4
changelog:
  - actually use find_lang (Dawid)
  - desktop file fixes (Dawid)
  - fixed scrollkeeper patch
  - add missing BuildRequires on desktop-file-utils


author: Peter Gordon <peter@thecodergeek.com> - 1.8.3-3
changelog:
  - Add hard dependency on dbus-sharp, since it's not automatically picked up
    by RPM at build-time from the dbus-sharp-devel BuildRequires. (Thanks to
    David Nielsen for the bug report via Jabber.)
  - Add minimum version for dbus-sharp and dbus-sharp-devel dependencies.


author: Peter Gordon <peter@thecodergeek.com> - 1.8.3-2
changelog:
  - (Note to self: Don't fix it if it's not broken.) Drop unnecessary default
    theme fix:
    - fix-default-theme-base-href.patch
  - Add patch to put the Fedora People feed into the default collection.xml:
    + fedora-people-in-default-collection.patch


author: Peter Gordon <peter@thecodergeek.com> - 1.8.3-1
changelog:
  - Unorphan, since Carlos Martín Nieto has picked upstream development.
  - Update to new upstream release (1.8.3)
  - Add dbus-sharp-devel to the BuildRequires to properly allow D-Bus support.
  - Lots of spec file cleanups:
    (1) Use macros instead of $RPM_* variables
    (2) Whitespace/formatting adjustments
    (3) Don't mark installed GConf schemas as %config 
  - Drop unnecessary patches:
    - gtk-sharp2-gecko-sharp2.patch
    - aclocal.m4-ngettext.patch
  - Add a backported patch (from 1.8.4) to fix compilation error:
    + fix-PrintJob-ambiguous-reference.patch
  - Add a backported patch (from 1.8.4) to fix the default theme base location:
    + fix-default-theme-base-href.patch


author: Trond Danielsen <trond.danielsen@gmail.com> - 2.6.0-6
changelog:
  - Renamed source code package to libc-sources.
  - Change BuildRequire from byacc to bison.
  - Added "Require: sdcc" to libc-sources package.
  - Empty %doc entry removed.
  - Updated description of libc-sources package.


author: Trond Danielsen <trond.danielsen@gmail.com> - 2.6.0-5
changelog:
  - Source URL updated.
  - Separate src package created.
  - Disabling stripping of binaries to get proper debuginfo package.


author: Ralf Corsépius <rc040203@freenet.de> - 2.6.0-4
changelog:
  - Add sdcc-2.6.0-configure.diff.
  - Pass Q= to make to make building verbose.
  - Add __os_install_post post-hacks to prevent brp-strip from processing 
    foreign binaries.


author: Trond Danielsen <trond.danielsen@gmail.com> - 2.6.0-2
changelog:
  - Emacs scripts moved to the correct folder.
  - Moved binaries to /urs/libexec/sdcc, added symlinks with sdcc- prefix in /usr/bin.
  - Various rpmlint errors fixed.


author: Deepak Bhole <dbhole@redhat.com> - 0:2.8.9-6jpp_1fc
changelog:
  - Added conditional native compilation.
  - From gbenson@redhat:
  -    Remove classes that don't build without said jarfiles.
  -    Avoid Sun-specific classes.


author: Karel Zak <kzak@redhat.com> 1.6.8p12-7
changelog:
  - fix #198755 - make login processes (sudo -i) initialise session keyring
    (thanks for PAM config files to David Howells)
  - add IPv6 support (patch by Milan Zazrivec)


author: Dan Walsh <dwalsh@redhat.com> 1.6.8p12-3
changelog:
  - Remove selinux patch.  It has been decided that the SELinux patch for sudo is
  - no longer necessary.  In tageted policy it had no effect.  In strict/MLS policy
  - We require the person using sudo to execute newrole before using sudo.


author: Karel Zak <kzak@redhat.com> 1.6.8p9-1
changelog:
  - new version 1.6.8p9 (resolve #161116 - CAN-2005-1993 sudo trusted user arbitrary command execution)


author: Colin Walters <walters@redhat.com> 1.6.7p5-24
changelog:
  - Enhance sesh.c to fork/exec children itself, to avoid
    having sudo reap all domains.
  - Only reinstall default signal handlers immediately before
    exec of child with SELinux patch


author: Nalin Dahyabhai <nalin@redhat.com> 1.6.6-2
changelog:
  - remove absolute path names from the PAM configuration, ensuring that the
    right modules get used for whichever arch we're built for
  - don't try to install the FAQ, which isn't there any more


author: Josef Whiter <josef@toxicpanda.com> 0.9.4-4
changelog:
  - fixed changelog entry 
  - removed NEWS from the %doc section
  - removed gettext from the BR
  - added libXt-devel as a BR
  - added --remove-category and --copy-name-to-generic name to the desktop-file-install
  - added a comment to the desktop file


author: Petr Machata <pmachata@redhat.com> - 1.9.20050813-1
changelog:
  - Thomas Dickey's 20050813 version of byacc:
    - own build system (linux patch reverted)
    - use tmpfile (security patch reverted)
  - Tidy up the specfile per rpmlint comments


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to the version in FreeBSD CVS - it's actively maintained, unlike
    the 1993 4BSD version we used to have


author: Anthony Green <green@redhat.com> 0.1.17a-1
changelog:
  - Update sources.
  - Remove jack-audio-connection-kit dependency, which is implied by
    lash dependency.


author: Anthony Green <green@redhat.com> 0.1.17-8
changelog:
  - Tweak vkeybd.desktop file.
  - Package ChangeLog.
  - Clean up %files.
  - Move Categories to .desktop file.
  - More LADCCA to LASH patching.
  - Fix man page permissions.


author: Anthony Green <green@redhat.com> 0.1.17-6
changelog:
  - Remove my COPYING file.
  - Don't use update-desktop-database.
  - Clean up BuildRequires.
  - Install the icon in the hicolor tree.
  - Require hicolor-icon-theme.
  - Don't Require tcl, since tk does that.
  - Collar tk version requirements.
  - Make vkeybd.tcl executable.
  - Require(post,postun) gtk2 for gtk-update-icon-cache.


author: Stephanos Manos <stefmanos@gmail.com>
changelog:
  - Fixed Scrollkeeper database update
          -disabled scrollkeeper update from make
          -added scrollkeeper-database-update in the %post & %postun section
  - Added %post & %postun entries for the desktop file
  - Added %post & %postun entries for the gtk+ icon cache file


author: Piotr Eljasiak <epiotr@use.pl>
changelog:
  - install gnome-commander icon to %{_datadir}/pixmaps/
  - install gnome-commander.1* to %{_mandir}/man1/


author: Marcus Bjurman <marbj499@student.liu.se>
changelog:
  - The default icon for this project is now called gnome-commander.png
    The xpm variant of the same icon is now also renamed in the same manner.


author: Jon Masters <jcm@redhat.com> 8.0.45-15
changelog:
  - Add modalias tags to kernel module packages (kmods) for tracking.
  - Further information is available at http://www.kerneldrivers.org/.


author: Jon Masters <jcm@redhat.com> 8.0.45-14
changelog:
  - Rebased all previous patches (since java fix introduced offset).
  - Added Fedora per-release macros to platforms section of macros.
    Further debate may see these move elsewhere in the ordering.


author: Elliot Lee <sopwith@redhat.com> 8.0.33-1
changelog:
  - Change -D to -Wp,-D to make java happy
  - Add -D_FORTIFY_SOURCE=2 to global cflags (as per Jakub & Arjan's request)


author: Jens Petersen <petersen@redhat.com> - 8.0.26-1
changelog:
  - preserve the vendor field when VENDOR not set
  - put VENDOR in the final i386-libc line, not the tentative one


author: Jens Petersen <petersen@redhat.com> - 8.0.25-1
changelog:
  - update config.{guess,sub} to 2003-06-17
  - define VENDOR to be redhat only when /etc/redhat-release present
    [suggested by jbj]
  - put VENDOR in vendor field in our config.guess file for
    ia64, ppc, ppc64, s390, s390x, x86_64 and elf32-i386 Linux
  - drop the --host, --build, --target and --program-prefix configure options
    from %configure, since this causes far too many problems


author: Jens Petersen <petersen@redhat.com> - 8.0.22-2
changelog:
  - add config.guess and config.sub (2003-02-22) with s390 patch on config.sub
  - make %configure use them


author: Phil Knirsch <pknirsch@redhat.com> 8.0.3-2
changelog:
  - Added fix for outdated config.[sub|guess] files in 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=powerpc-redhat-linux-gnu --host=powerpc-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info section


author: Alexander Larsson <alexl@redhat.com> 8.0.1
changelog:
  - Add debug package support to 
      
      
      
      /usr/lib/rpm/redhat/brp-compress 
      /usr/lib/rpm/redhat/brp-strip /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump 
      /usr/lib/rpm/brp-python-bytecompile 
      /usr/lib/rpm/redhat/brp-java-repack-jars


author: Jens Petersen <petersen@redhat.com> 7.3.92-4
changelog:
  - fix %configure targeting for autoconf-2.5x (#58468)
  - include ~/.rpmmacros in macrofiles file path again


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.0.1-0.fdr.5
changelog:
  - added %defattr so that we wouldn't get big list of user temp1 does not exist.
  - added XFree86-devel into BuildRequires, since fedora build seems to lack
    dependencies to libX11 and libXext (from XFree86-libs)


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.0.1-0.fdr.2
changelog:
  - fixed Group in SPEC file (to Amusements/Graphics)
  - added AUTHORS, NEWS, README.config and TODO into %files %doc list.
  - removed INSTALL from %files
  - and other minor changes based on bugzilla.fedora.us #109.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.0.1-0.fdr.1
changelog:
  - fixed release to match Fedora guidelines.
  - ./configure to %configure and bunch of other find-replace operations.
  - added missing BuildRequires.


author: Juha Ylitalo <jylitalo@iki.fi> - 0:1.0.1-1.fdr.1
changelog:
  - upgrade from 0.94 to 1.0.1
  - fedora related changed to Hari Nair <hari@alumni.caltech.edu>'s original spec
  - added patch to make my 0xf6 etc. finnish characters to show in markers.


author: Paul Howarth <paul@city-fan.org> 0.06-3
changelog:
  - remove redundant BR: perl
  - add BR: perl(Data::Page), perl(Exporter::Lite), perl(DBD::SQLite)
  - honor %{_smp_mflags}
  - include license text
  - remove explicit perl(Class::DBI) dep - it's autodetected


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 0.3.1-2
changelog:
  - Remove unneeded python_sitearch macro
  - Remove unneeded python-abi requirement
  - No longer ghost *.pyo files


author: Scott Baker <scott@perturb.org> - 0.3.2-4
changelog:
  - Updated how the .desktop file is handled
  - Updated the make to include SMP options
  - Remove bogus "requires"
  - Update the rm -rf in clean and install


author: Nils Philippsen <nphilipp@redhat.com> 2.0.4-2
changelog:
  - don't crash on maliciously formed callsign, etc. strings (#176626, patch
    backported from upstream CVS)


author: Nils Philippsen <nphilipp@redhat.com> 2.0.4-1
changelog:
  - version 2.0.4
  - update lookup patch
  - build require c-ares-devel instead of adns-devel
  - add newly introduced libs and includes (but exclude headers and static libs,
    courtesy of Matthias Saou)
  - use -fPIC, -pie (hopefully) correctly to avoid build problems on x86_64


author: Nils Philippsen <nphilipp@redhat.com> 2.0.2-2
changelog:
  - build with adns
  - build require libGL-devel and libGLU-devel to hopefully resolve building
    problems
  - apply name lookup patch


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - move package over to Extras
  - make desktop file a file, don't generate it in %install
  - use an a bit more individual build root
  - buildrequire curl-devel


author: Alan Cox <alan@redhat.com> 1.10.6-2
changelog:
  - Adopted for FC3 core from Matthias Saou's freshrpms package. Thanks
    to Matthias for doing all the work.


author: Matthias Saou <http://freshrpms.net/> 1.10.4-1
changelog:
  - Update to 1.10.4.20040125, update the included docs.
  - Removed no longer existing bzfls file and added bzadmin.


author: Steven Pritchard <steve@kspei.com> 1.3.2-2
changelog:
  - Drop BR: xorg-x11-devel, since it should be pulled in by SDL-devel
  - Don't hard-code path to X libs
  - Drop hard-coded LDFLAGS
  - Drop redundant "for Linux..." from description


author: Steven Pritchard <steve@kspei.com> 1.3.2-1
changelog:
  - Update to 1.3.2 (#169275)
  - BR xorg-x11-devel instead of XFree86-devel
  - Change URL to the gl-117 home page


author: Harald Hoyer <harald@redhat.com> - 1.3.95
changelog:
  - translation update (bug #208886)
  - use rhpl.iwlib for wireless functions (bug #197954)
  - added perl-XML-Parser build requirement


author: Harald Hoyer <harald@redhat.com> - 1.3.90
changelog:
  - fixed:
  - [135014] MTU and MRU should be confiurable for ADSL
  - [141055] system-config-network needs to be able to set MTU
  - [149780] no GATEWAY, IPADDR and NETMASK, if BOOTPROTO=dhcp 
  - [150362] [Errno 2] No such file or directory: '/etc/hosts'
  - [157172] Wrong DNS for provider "ZEDAT_Berlin"
  - [160417] Bad: cannot make any changes to network settings
  - [169819] Trailing space in host name causes crash
  - [175078] String (country name) change request
  - [176145] Please enable Serbian translation in system-config-network
  - [177198] deprecation warning in system-config-network
  - [187563] localized option passed to ifcfg-wlan0 files
  - [188321] Creating an alias for a network interface breaks device 
             setup after reboots
  - [190242] Firefox instance running as root when used to read docs 
             for system-config-*
  - [197401] Don't write HWADDR for alias interfaces


author: Harald Hoyer <harald@redhat.com> - 1.3.27
changelog:
  - use new pam stack replacement
  - added OnParent for Alias Devices
  - added SPI and better key generation for ipsec
  - corrected column handling in main window
  - GUI liftup
  - added AVM Fritz!PCI v2.0 ISDN card to ISDN Hardwarelist (bug 134605)
  - remove /etc/sysconfig/isdncard, if no ISDN is configured


author: Harald Hoyer <harald@redhat.com> - 1.3.17
changelog:
  - better "make clean"
  - removed references to Red Hat Linux
  - added testsuite for data layer
  - added some module-info entries
  - added command line parsing to network-control
  - added IPsec to network-cmd
  - switched logging to syslog
  - do not touch bonding slaves
  - better alias handling
  - better handling of chroot 
  - read *.ko modules also
  - handle modules parameter without "="
  - create correct SPI_ identifier for manual IPsec keying
  - better hostname handling
  - better profile handling
  - fix kernel version parsing
  - unknown-flag.xpm for unknown country flags
  - fixed TokenRing glade file (bad hash at beginning of file)
  - fix the length of IPSec shared keys
  - prevent modified status after profile switching
  - save dialog, for ipsec deactivation
  - PEERDNS defaults to yes
  - routing for wireless config dialog
  - only display CIPE for kernel < 2.6


author: Harald Hoyer <harald@redhat.com> - 1.3.16
changelog:
  - be more relaxed, when parsing the kernel version (115917)
  - fixed removing of Hostname (115795)
  - fixed "DevEthernet instance has no attribute 'IPv6Init'" (116375)
  - removed save dialog, when switching profiles (107399)
  - added generic Initstrings (115768)
  - added secure.png logo
  - added "-c" parameter for activate/deactivate
  - changed hotkeys to avoid double entries
  - use new pixmap loading code (only take local paths, if debugging is active)
  - moved updateNetworkScripts() to NC_functions.py
  - fallback on /etc/sysconfig/network-scripts
  - removed /usr/lib/rhs/python from sys.path
  - added -? as a command line option
  - corrected --root= option for gui
  - activate/deactivate buttons always sensitive
  - check for ipsec-tools and dynamically display ipsec tab
  - no second dialog while activating in system-control-network
  - change hosts file on hostname change
  - PEERDNS is true, if not configured


author: Harald Hoyer <harald@redhat.de> 1.3.13
changelog:
  - fixed T-Online dialog #110911
  - default flow control to CTSRTS #110347
  - only clear login/pw on provider select, if provider has its own number
  - fixed cancel of dialup process #103421
  - default to "/" for chrooted configuration
  - default to "default" profile if none active
  - fixed "activate button not active" #110193
  - scn-tui requires newt #104213
  - fixed #107816, by recognizing /var/run/ppp-ppp<NICKNAME>.pid
  - fixed a bug in ISDN activate #100677


author: Harald Hoyer <harald@redhat.de> 1.3.12
changelog:
  - renamed redhat-config-network -> system-config-network
  - added pciutils requirement
  - added utf-8 encoding comments
  - corrected some translation strings
  - added redhat-config-network provides


author: Harald Hoyer <harald@redhat.de> 1.3.10
changelog:
  - removed restriction on t-online password entry #105970
  - failsafe changing the error image #108094
  - corrected indention #108151


author: Harald Hoyer <harald@redhat.de> 1.3.9
changelog:
  - fixed 107501, 107387, 106751, 104213
  - fallback to no logfile, if opening the logfile fails
  - test, if /etc/{hosts,resolv.conf} exists
  - removed ipsec tab


author: Harald Hoyer <harald@redhat.de> 1.3.3
changelog:
  - fixed #85365
  - fixed glade file loading
  - more ipsec stuff
  - neat can use a "chrooted" environment now (-r)
  - .rpmsave will not be loaded
  - no interrupt/io settings for PNP cards
  - HIGIfied labels
  - double click for hardware and ipsec


author: Harald Hoyer <harald@redhat.de> 1.2.12-1
changelog:
  - wlan0 handling
  - splash screen bug fixed
  - improvements in HW list handling
  - isdncard handling #91607


author: Harald Hoyer <harald@redhat.de> 1.2.3-3
changelog:
  - Bugfix release for 9
  - fixed #85011, #85703, #85653, #84956, #83640, #68169, #86476, #78043, #77763


author: Trond Eivind Glomsrød <teg@redhat.com> 1.1.17-1
changelog:
  - Make it use the gnome help system, add yelp as a dependency (#71857)
  - Traceback fix: # 72581
  - translation updates


author: Trond Eivind Glomsrød <teg@redhat.com> 1.1.13-1
changelog:
  - Fixes to the traceback dialog (fix "save to floppy" (we don't do that),
    add i18n.)
  - Fix traceback with malformed /etc/hosts (#69320)
  - Fix dependencies (#69990)
  - Some minor userhelper fixes


author: Than Ngo <than@redhat.com> 1.1.3-1
changelog:
  - get_pixbuf: if no icon was not found, looks the icons
    in standard icon directory
  - bug fixes in wireless


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Turn off wireless. It doesn't work with all modes, all cards
   and you can't edit IP settings after the initial attempt


author: Harald Hoyer <harald@redhat.com> 0.9.6-1
changelog:
  - seperated gui from data layer
  - make .pyc ghost files
  - fixed profile/alias problem
  - modem probing only once


author: Than Ngo <than@redhat.com> 0.9.3-1
changelog:
  - fix internet-druid fails (bug #54192)
  - fix dial on demand problem from some ISDN Provider in German
  - don't trace back if length of Login name is 2 (bug #54322)


author: Than Ngo <than@redhat.com> 0.8.2-1
changelog:
  - fix backtrace bug in CIPE
  - fix traceback bug if self.device.Dialup is None
  - if hardware is deleted, remove all devices used this hardware
  - de.po: fix bad translation


author: Phil Knirsch <phil@redhat.de> 0.8.0-2
changelog:
  - Fixed wrong option handling in /etc/modules.conf (#52853, #52923)
  - Fixed empty search entry in /etc/resolv.conf (#52926)
  - Fixed empty domain entry in /etc/resolv.conf (#52924)
  - Fixed ethernet hardware probing traceback (#52921)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.4-1
changelog:
  - More bugfixes, among them #51929, #51991, #51721, #51722,
    partial #52044, #51720. 
  - Updated translations, include more languages


author: Phil Knirsch <phil@redhat.de> 0.7-1
changelog:
  - Added a lot of documentation
  - Final changes to the Modem druid dialog and code to look just like the
    hardware add dialog for modems.


author: Phil Knirsch <phil@redhat.de> 0.6.8-3
changelog:
  - Added the modem detection for the ModemDruid.
  - Added kudzu as requirement as it is needed for modem detection.
  - For compatibility still check for symlinks, too. Otherwise older setups will
    break.


author: Phil Knirsch <phil@redhat.de> 0.6.7-2
changelog:
  - Fixed various important bugzilla bugs
  - Added and implemented the add Hardware dialog.
  - Added a working Apply button.
  - Switched to using hardlinks instead of symlinks for config files.


author: Than Ngo <than@redhat.com>
changelog:
  - fix pap/chap Login name for T-online
  - fix InitStrings
  - use gettext function in NC_functions
  - fix loading DEFROUTE/PERSIST/DEMAND/IDLETIMEOUT for Modem dialup
  - don't backtrace if 'SetVolume' and 'Dial Command' are not defined


author: Phil Knirsch <phil@redhat.de> 0.6.1-2
changelog:
  - Fixed buggous removal of ifcfg-lo (#50478)
  - Fixed problems with modem volume in hardware dialog
  - Fixed missing /dev/modem for modem setup (#50673)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Don't run autogen.sh
  - Mark files in /etc as configuration files
  - Multiple fixes to automake files
  - Add Norwegian translation to desktop files
  - install into the configuration tool desktop directory


author: Than Ngo <than@redhat.com> 0.3.1-1
changelog:
  - obsolete isdn-config internet-config
  - requires consolehelper, alchemist
  - add icon and desktop file
  - use bzip2


author: Jeremy Katz <katzj@redhat.com> 1.5.1-1
changelog:
  - apply mikem's patch so that we handle loop devices better (#84351)
  - switch to making a loopback img and then dd'ing that to the floppy (#84351)
  - man page updates (#77262)


author: Jeremy Katz <katzj@redhat.com> 1.5.0-1
changelog:
  - use copy instead of mkinitrd to get the initrd
  - don't get default kernel args if grubby can't figure out the default kernel
  - exit with an exit status of 1 if things fail


author: Erik Troan <ewt@redhat.com>
changelog:
  - if --kernelargs isn't specified and grubby is available use it to get
    the arguments to use; this only works with mkinitrd (grubby) >= 3.4.3
    (8591)
  - fixed some typos in man page (11297)
  - use cp -p rather then cp -a (as we want to follow symlinks) (13480)
  - create image files if appropriate (53818)
  - compact option removed (syslinux doesn't use it anyway) (58989)


author: Matt Wilson <msw@redhat.com>
changelog:
  - changed Summary:, it's no longer a bad copy and paste job from the
    mkinitrd spec file (MF #50193)


author: Erik Troan <ewt@redhat.com>
changelog:
  - switched to use syslinux rather then lilo
  - requires dosfstools
  - put version in only one place, mkbootdisk


author: Erik Troan <ewt@redhat.com>
changelog:
  - wasn't including nfs, isofs, or fat modules properly
  - mkinitrd args weren't passed right due to a typo


author: Robin Norwood <rnorwood@redhat.com> - 0.59-2
changelog:
  - Resolves: bz#226270
  - Fixed issues brought up during package review
  - BuildRequires should not require perl, and fixed the format.
  - Fixed the BuildRoot


author: Ville Skyttä <ville.skytta at iki.fi> - 0.49-2
changelog:
  - Explicitly disable tests requiring network access at build time.
  - Exclude Win32 and Cygwin specific modules.
  - More specfile cleanups.
  - Honor $RPM_OPT_FLAGS.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.15-1]
  - Definition of demonstration SelectRE-work-a-like button command
    changed, since it was broken. Also added glob check button.
  - Lack of internal quoting caused Dir{To,From}Other to fail on
    paths containing spaces, as did the shortcuts. Fixed.
  - Changed appearance of check buttons {Ix} input dialog codes.
  - Having lurked among the giants of comp.lang.c for at least five
    years, I finally realized that identifiers whose names begin
    with an underscore immediately followed by an upper case letter
    are reserved for the implementation. Since I, for some historical
    reason, tend to use structure tags formed like that, gentoo was
    very much in violation of the holy scripture of ISO C. This has
    now been fixed, of course (except in widgets/). Feels good. :)
  - Being urged on by a Brazilian gentoo user, Alceu Rodrigues de
    Freitas Junior, I caved in and went through the code, marking
    all strings suitable for translation using gettext. A translation
    to my own mother tongue, Swedish, is included in the locale/sv/
    directory. gentoo's I18N support is very early, and by default
    it will not build with it included. I need help with autoconfig
    before doing that.
  - Capped the percentage number in the textviewer at 100%. :)
  - Left-adjusted the filename in the progress window. :)
  - Improved behavior when an operation (such as Copy or Move) is
    cancelled. Previously, it was not possible to correctly cancel
    if the files being copied were smaller than the copy buffer
    size, and the 'keep full-sized copy on error?' flag was on.
  - A long operation can now be cancelled by simply closing the
    progress-reporting window.
  - Made parsing of {Fup} (among other things, hopefully) work
    better when 'treat focus as selection?' flag is on. Sneaky.
  - Test-compiled against glib and GTK+ version 1.2.8. Went fine.
  - Fixed buglet that prevented modes (aka permissions) from being
    formatted correctly. Reported by Erik Johansson.
  - Banged a bit on the page up/down response for the focus bar.
    Way less ugly implementation, and (I think) better behavior
    now. Still wish GTK+ permitted use of it's built-in focusing
    bar, though. :(
  - Updated to the latest version (0.5) of Johan Hanson's
    odemilbutton widget.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.14-3]
  - Doh!. Was not setting default icon path in default gentoorc. Fixed.
    Thanks Udo K. Schuermann <walrus@ringlord.com>.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.14-1]
  - Added support for extracting tar.gz, tar.bz2, and zip files to
    the example config. Select archive, right click, then choose
    the "extract" item in the "File Action" submenu.
  - Due to an internal quoting problem, MkDir would fail to enter
    the created directory if the name contained spaces. Fixed.
  - The Makefile no longer attempts to create a backup of the config,
    and only installs the supplied example if no old config exists.
  - The ChOwn command now uses combo boxes rather than menus to
    display the system data, and also allows you to type in a
    user and/or group number or name directly. Way nicer.
  - Brought back the 'grab' button in the window pos/size config,
    but only for the main window. Should make a few users happy. :)
  - Altered the huge parent buttons' relief style; they now look
    more like wide borders, which JH and I find less distracting.
  - Added an option (hidden away in the Command Options page,
    DpFocus tab) that makes gentoo move the focus row to the last
    row selected using the mouse. Only works if focusing is on.
  - The MenuPopup command can now be bound to a keyboard key, just
    like any other command. Previously, it could only be bound to
    a mouse button. Bound to Ctrl+Space in example config.
  - Added Ctrl+A and Shift+Ctrl+A as keyboard shortcuts for the
    [Select] All and None commands, respectively. :)
  - Improved ANSI compliance by removing use of "str" as a prefix
    in function names. :)
  - A pane's contents can now be sorted on any content type, not
    just those that are displayed. There is currently no way of
    changing to a non-displayed type without opening the config
    window, though.
  - Touched up the sorting code somewhat, and while doing that
    noted that user and group names could not actually be sorted
    on as text. They sure can now.
  - Fixed horrible bug in the {}-code parsing and handling, that
    made gentoo segfault when certain sequences of commands were
    run. Reported by T. Tilton.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.13-1]
  - Fixed incredibly stupid bug (reported by plenty of people, it's
    nice to know people care :) which prevented the text viewer
    window from closing when it should. It's a two-line fix.
  - If you enable the "System Default" Control key mode in the
    dirpane config, it will now work.
  - There was some broken logic related to quitting and the dialog
    that asks about saving changed configs. Fixed that, and also
    cleaned up the code significantly, removing duplicate stuff.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.12-1]
  - I'm reasonably sure I fixed a bug which caused a crash if you
    hit enter after entering an *empty* directory using the key-
    board-controlled focusing mechanism.
  - Added support for tall, thin, parent buttons along the outer
    edges in the panes. Enable through the "Huge Parent Button?"
    checkbox in the config. The position and action of these is
    currently not configurable; it's always outer edge & DirParent.
  - Incorporated alternative implementation of the GtkLabel widget
    provided by Johan Hanson. This label implementation is only used
    for the status line in the top of the window, which reportedly
    had refresh-problems with some pixmap-based GTK+ themes.
  - Redid the code for the textviewer, which was very old and some-
    what confused. This might make it support mouse wheel scrolling
    better. Since I don't have a wheelie mouse, I can't test it...
  - Fixed tiny bug which caused GTK+ warnings if you hit TAB in the
    command selection dialog without having typed anything first.
  - Implemented a Join command, to counter the (still incomplete)
    Split command. Pretty neat, with DnD reordering.
  - gentoo can now optionally ignore the state of the NumLock key
    when parsing keyboard and mouse input. Enable the check button
    in the bottom of the Controls config page. Note that only the
    input event is filtered, not the definition (do not use NumLock
    in actual mappings with this flag on).
  - New version of the odscrolledbox widget, provided by Johan
    Hanson as always. Should fix some smudgy redrawing problems.
  - Brought the (c) in the About box into the 21th century, added
    acknowledgement (and mail address) of Johan Hanson's work.
  - Added recognition and viewing of LHa compressed files to the
    example config. Requires the 'lha' external command.
  - gentoo can now remember the position and size of the config and
    textviewer windows, in addition to the main window. See config
    page labeled "Windows" (was "Pos & Size" previously). Eh, also
    see the BUGS file, since this feature has a few problems still. :(
  - Tweaked code that dealt with 64-bit stuff; gentoo should now
    compile better on Linux/Alpha platforms.
  - Selected content in the right-hand list in the Dirpane config
    page can now be reordered directly, by dragging. You can still
    use the up/down buttons below the list, like always.
  - Er, not a fix per se, but this version of gentoo has been
    compiled and executed using GTK+ 1.2.7. No extensive tests,
    though.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.11-1]
  - Tweaked the FileAction command slightly: now it will stop running
    the action if the selection is empty. This helps when you run a
    command containing e.g. a {Fu} code on more than one file, since
    it will then just run the command once, then stop since the {Fu}
    "consumed" the entire selection. Hopefully this is not a bad thing.
  - The GetSize command no longer loses track of the pane's vertical
    position.
  - The pane centering on startup was changed back to the pre-0.11.10
    behavior, since the "fix" didn't help the user who reported the
    problem. Weird.
  - Rewrote core file copying routine, used by Copy, CopyAs, Move,
    and other commands. It now handles "magic" files whose length
    looks like zero (like most files in the /proc filesystem). It's
    also shorter, simpler, and possibly a tiny bit faster.
  - Fixed semi-obscure bug in the Split command; it wouldn't close
    output files on failed writes. Oops.
  - In an attack of POSIX panic, I removed all my symbols whose names
    ended in _MAX, leaving only standard ones. Touched ~130 places.
  - The SelectRE command now lets you chose what column content you
    wish to match against. This is sometimes useful, for example you
    could use the following command to select all rows whose files
    have an odd size: 'SelectRE glob=0 full=0 content=size [13579]$'.
       See "docs/scratch/command_args.txt" for a brief table of
    content names.
  - Removed all uses of stdlib's malloc() & free(), replacing them
    with glib's g_XXX work-alikes, making the code more consistent.
  - Added tooltips to the pane control widgets (the parent button,
    the path entry field, and the cryptic 'H' hide button).
  - RTFM:ed a bit, and fixed example config's "view_man" command to
    stop emitting control codes for bold and underline. This makes
    it work better with gentoo's viewer. Unsure about portability.
  - Added type, style, and view support for AVI and MPEG video clips
    to the example config. Both use 'xanim' for view. Untested. Also
    added support for IFF-ILBM bitmap images, through 'xv' as always.
  - Added a new command, DpFocusPath, which moves GTK+'s input focus
    to the current pane's path entry box. Bound to shift+Return in
    the example config. Call with select=1 to select contents, too.
  - Fixed buglet which made it annoying to bind commands to Return,
    since the config window's default button ("OK") would trigger.


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [gentoo-0.11.10-1]
  - Got mail from Jesse Perry <jap@unx.dec.com>, reporting problems
    building gentoo on an Alpha, running Tru64. Luckily, the report
    (and followups) included lots of detail and helpful hints, so I
    went over the offending code. Hopefully it works now.
  - I still got the expand/collapse tracking in the Styles config
    page wrong. <HOMER>Duh!</HOMER> Fixed again. This time, for sure!
  - Wrote a new command, RenameRE. It provides two ways of doing search
    and replace over selected file names, and then renaming the files.
    Learn about in "docs/scratch/renamere.txt". Recommended reading!
  - Fixed bug which prevented an error from the Rename command (and
    others, no doubt) from showing up.
  - Did a long-overdue, minimal, change in the way the active pane gets
    hilighted, now uses Johan Hanson's code in "colorutil.c". Should
    work better if you're running a themed GTK+.
  - Pressing return after entering a path name now causes that path
    to be entered, instead of (uselessly) popping up the combo menu
    showing directory history. Oops.
  - When running a command bound to a key, the key press signal is
    no longer propagated to GTK+; gentoo consumes it. This makes things
    work better when you bind stuff to e.g. cursor keys, which are
    used by GTK+ to control focus. A neat one-line fix.
  - The 'view_tar_bzip2' command in the example config has been made
    more portable (uses --use-compress-prog=bzip2 rather than -y).
  - If you attempt to DirRescan a directory which no longer exists,
    you will get an informative message. Better than silence.
  - Included a new icons package from Johan Hanson (<johan@tiq.com>).
    There are around 20 new icons, including a very cute Commodore
    logo for SID music files! Check them out in the icons/ subdir!
  - Fixed a portability problem in dirpane.c; a reference to strncmp().
  - Upgraded my home development machine to GTK+/glib 1.2.6, which
    went fairly smooth. It exposed a bug in the config GUI, though.
  - The centering of the panes is now done later during startup,
    since one user reported problems with it. This is too bad, since
    it now looks kind of worse during startup. :(


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.5.1
changelog:
  - updated to 0.5.1
  - (re)enabled parallel build
  - applied -langinst patch and other ideas from
    https://bugzilla.fedora.us/show_bug.cgi?id=2019 (Ville Skyttä)
  - fixed build with gcc4 and db43
  - removed old cruft from the specfile


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0:0.4.6-0.fdr.1
changelog:
  - changed compile/install commands to work with the new, yet-another configure system
  - removed libpthread test since it went upstream
  - do not package README anymore; it contains installation/build instructions only
  - applied gcc3 patch
  - updated to 0.4.6
  - removed desktop patch which went upstream


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> 0:0.4.5-0.fdr.2
changelog:
  - applied Ville Skyttä's patch to add categories and to fix encoding of desktop-file
    (http://sourceforge.net/tracker/index.php?func=detail&aid=789374&group_id=62274&atid=500027)
  - removed '--add-category ...' options which become obsoleted by this
    patch


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> 0:0.3.2-0.fdr.2
changelog:
  - added icon
  - made minor fixes in the %description
  - added explicit epoch
  - created a separate .desktop file


author: Chris Lumens <clumens@redhat.com> 1.7.0-1
changelog:
  - Change .desktop file (#218925).
  - Make iptables default FORWARD rule REJECT (#221828).
  - Correct F12 behavior on main page (#221942).
  - Disable IPv6 firewall when asked to (#221942).
  - Support adding a user-specified custom firewall rules file that gets
    included after the defaults (#138143).


author: Chris Lumens <clumens@redhat.com> 1.6.30-1
changelog:
  - Reorganize code to be more useful as a library.
  - Allow changing the SELinux setting from text mode (#217767).


author: Chris Lumens <clumens@redhat.com> 1.6.29-1
changelog:
  - Update translations (#216563).
  - Remove unnecessary SELinux boolean panel.
  - GUI package should require same version of TUI package.
  - Fix IPv6 firewall to allow outbound connections and block incoming
    connections we don't need (tmraz, #217514).
  - Other ports expander should grow as the window grows (#217645).


author: Chris Lumens <clumens@redhat.com> 1.6.28-1
changelog:
  - Write SELinux config file before setting enforcing mode (#209372).
  - Add apply button to GUI (#177836).


author: Chris Lumens <clumens@redhat.com> 1.6.21-1
changelog:
  - Correctly mark messages for translation (#195013).
  - Remove /etc/sysconfig/ip6tables when firewall is disabled (#195786).


author: Chris Lumens <clumens@redhat.com> 1.6.20-1
changelog:
  - Be more careful when determining if something is a range or service with
    a dash in it (#192933).


author: Chris Lumens <clumens@redhat.com> 1.6.17-1
changelog:
  - Be smarter about if strings are valid ports (#183964).
  - Fix typo in firstboot (#186110).
  - Disable SELinux page if there's no policy installed (#186554).


author: Chris Lumens <clumens@redhat.com> 1.6.16-1
changelog:
  - Add requirement for scriptlets (#182876, #182877).
  - Add glade UI strings to translations (#182181).
  - Reorder service checkboxes to make the screen fit for Italian (#182447).


author: Chris Lumens <clumens@redhat.com> 1.6.15-1
changelog:
  - Fix firstboot warnings.
  - Make other services box look better.
  - Force reboot if SELinux is changed from enabled to disabled in
    firstboot (#177639).


author: Chris Lumens <clumens@redhat.com> 1.6.13-1
changelog:
  - Sort trusted services by service name (#178467).
  - Use a combo box for the other services list instead of just a text entry
    (#178108).


author: Chris Lumens <clumens@redhat.com> 1.6.6-1
changelog:
  - Add explanatory text to firewall and SELinux firstboot modules (#171022).
  - Fix a grammar error in lokkit help text (#152273).
  - Mark name in .desktop file for translation (#171819).
  - Remove support for modifying tunables since policy source will be
    disappearing in the future (#160896).


author: Chris Lumens <clumens@redhat.com> 1.6.5-1
changelog:
  - Remove the SELinux policy type combo box if there's only one policy
    installed.
  - Use a new pam configuration (#170644).
  - Don't pop up relabel warning during firstboot if the user did something
    like disabled->enabled->disabled before clicking next (#170549, #170550).


author: Chris Lumens <clumens@redhat.com> 1.6.4-1
changelog:
  - Fix checking for the -f flag in lokkit (markmc, #166568).
  - Sync up order of enable/disable options between UI and what gets written
    to the file (#166390).


author: Chris Lumens <clumens@redhat.com> 1.6.1-1
changelog:
  - Fix a typo in SELinux booleans (#164889).
  - Remove trusted devices section from firewall page.
  - Simplify choices on SELinux page (#164701).
  - Split firewall and SELinux into separate firstboot pages.
  - Require reboot after firstboot is done if SELinux options were changed.


author: Chris Lumens <clumens@redhat.com> 1.5.9-1
changelog:
  - Handle ports that are not listed in /etc/services (#157620).
  - Add an option to allow Samba browsing - enables several ports, so use
    with care (#133478).
  - Mark updated menu option and comment for translation (#156800).
  - Rebuilt .pot file.


author: Chris Lumens <clumens@redhat.com> 1.5.4-1
changelog:
  - Add HTTPS as a separate option instead of implying it with HTTP.
    (#145628).
  - Have the menu option and comment mention firewalling (#124266).
  - When reading in the config, use service names instead of port numbers in
    the other ports field (#128541).
  - Rebuild .pot file for string changes.


author: Chris Lumens <clumens@redhat.com> 1.5.3-1
changelog:
  - Rebuild .pot file.
  - Return translatable strings for SELinux page (Ronny Buchmann, #152059).
  - Fix GTK deprecation warnings.


author: Dan Walsh <dwalsh@redhat.com> 1.4.1-3
changelog:
  - Fix several problems including Tunables being reported incorrectly.
  - Allow tool to reload policy if tunables change
  - Allow tool to change enforcing mode


author: Jeremy Katz <katzj@redhat.com> 1.3.6-1
changelog:
  - fix segfault in config reading if config files don't exist
  - don't flush iptables chains if run with --nostart


author: Bill Nottingham <notting@redhat.com > 1.3.5-1
changelog:
  - read in old config in the TUI (#25510)
  - have https tag along with http (#61958)
  - fix segfault (#88533)


author: Brent Fox <bfox@aspen.chinfox.net> 1.3.0-1
changelog:
  - rename to system-config-securitylevel
  - obsoletes redhat-config-securitylevel
  - convert to Python2.3


author: Bill Nottingham <notting@redhat.com> 1.2.0-1
changelog:
  - add patch for stateful firewalling (#87585, <dax@gurulabs.com>)
  - tweak tools appropriately (katzj@redhat.com), obsolete lokkit/gnome-lokkit


author: Mike A. Harris <mharris@redhat.com> 1.0.1-3
changelog:
  - Added "Requires: xorg-x11-proto-devel" to devel package, needed by xevie.pc
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.3-1
changelog:
  - Updated libXevie to version 0.99.3 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.


author: Andy Shevchenko <andy@smile.org.ua> 0.38-4
changelog:
  - drop zlib-devel and bzip2-devel
  - require clamav-update
  - remove condition check from post scriptlets
  - satisfy rpmlint claim on debuginfo subpackage
  - fix Terminal value in desktop-file
  - do not ship NEWS file due to is empty


author: Andy Shevchenko <andriy@asplinux.com.ua> 0.38-2
changelog:
  - require freshclam for correct DB update
  - fix rpmlint claim:
    - pack ScanWithKlamAV as executable
    - do not use absolute link
  - use $RPM_BUILD_ROOT and $RPM_OPT_FLAGS in all places


author: Andy Shevchenko <andriy@asplinux.com.ua> 0.37-2
changelog:
  - adjust spec according to Fedora Extras review:
    - remove --with-qt-dir, add --disable-rpath
    - BRs: desktop-file-utils
    - place desktop file properly
    - update gtk icon cache


author: Andy Shevchenko <andriy@asplinux.ru>
changelog:
  - update to 0.30.1
  - separate klamav from whole source tarball
  - drop unneeded patch (in mainstream)


author: Ville Skyttä <ville.skytta at iki.fi> - 1.20-1jpp
changelog:
  - Update to 1.20.
  - Fix Group, Distribution and Vendor tags.
  - Use sed instead of bash 2 extension for symlink creation during build.
  - Use build.xml from upstream tarball.


author: Steven Pritchard <steve@kspei.com> 0.2800-1
changelog:
  - Update to 0.28, but call it 0.2800 to avoid an epoch bump.
  - Various spec cleanups to closer match cpanspec output.


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.2605-1
changelog:
  - Update to 0.2605.
  - Disable some tests if Test::Harness::Straps is < 0.20 to avoid failing
    when the default @INC is longish, such as in FC3 Perl.
    http://sourceforge.net/mailarchive/forum.php?thread_id=6056820&forum_id=10905
    http://rt.cpan.org/NoAuth/Bug.html?id=5649


author: Ville Skyttä <ville.skytta at iki.fi> - 0:0.25-0.fdr.2
changelog:
  - Do not require Archive::Tar, it is not used on Unix platforms anyway.
    Instead, gzip and tar are used, but even they are optional and used only
    in the 'dist' and 'ppmdist' actions.


author: Than Ngo <than@redhat.com>
changelog:
  - Copyright -> License
  - fix activate ethernet device problem
  - get rid of pppoe initscript, use ifup/ifdown
    to activate/shutdown xDSL connection
  - convert old pppoe config format into new format
  - remove adsl-setup, Users have to use netconf to setup xDSL connection
  - excludearch s390


author: Than Ngo <than@redhat.com>
changelog:
  - fixed so that pppoe script does not kill adsl connection when
    the runlevel is changed. 
  - remove excludearch ia64


author: <fuyu@users.sourceforge.jp>
changelog:
  - COPYING files of oniguruma and libochushagtk_lgpl will be installed
    as COPYING.oniguruma and COPYING.libochushagtk_lgpl.


author: Mamoru Tasaka <mtasaka@ioa.s.u-tokyo.ac.jp> 0.5.8.2-1
changelog:
  - Import to Fedora Extras.
  - Add two patch (from 2ch BBS ochusha thread).
  - Remove unnecessary .so files and desktop file installed on wrong
    location.
  - Use desktop-file-install, update-desktop-database
  - Add some missing BR.
  - Change documents' encoding.


author: <fuyu@users.sourceforge.jp> 0.5.6-1
changelog:
  - Version up.
  - The ochusha.spec file is now generated automatically.
  - Some hardcoded build/install rules are replaced with common macros.
  - Post install/uninstall rules are modified to link/unlink the
    ochusha.desktop file for menu.


author: <yuhei@users.sourceforge.jp> 0.4.8-1
changelog:
  - Version up.
  - Added files about libtsengine.
  - Added ochusha-init.scm file.
  - Added to run ldconfig when (un)installing.


author: Jean-Luc Fontaine <jfontain@free.fr> 20.0-2
changelog:
  - removed sqlite-tcl requirement as it is disabled in the sqlite 3
    update for FC-3 and not in Rawhide


author: Jean-Luc Fontaine <jfontain@free.fr> 20.0-1
changelog:
  - 20.0 source release
  - use specific build requirements for fedora distribution
  - improved description.


author: Jean-Luc Fontaine <jfontain@free.fr> 19.7-0.fdr.1
changelog:
  - 19.7 release
  - titles of displayed tables change color to reflect module state
  - in statistics table, added standard deviation column


author: Jean-Luc Fontaine <jfontain@free.fr> 19.2.1-0.fdr.1
changelog:
  - 19.2.1 version, which restores compatibility with Tcl 8.3 core
  - allowed building on 64 bit architecture by passing library
    directories to make


author: Jean-Luc Fontaine <jfontain@free.fr> 19.2-0.fdr.1
changelog:
  - 19.2 version
  - in build stage, removed -s option from CFLAGS
  - require SQLite as default database storage mean
  - made summary more descriptive
  - updated description: added formulas and reference to moomps


author: Jean-Luc Fontaine <jfontain@free.fr> 17.16-0.fdr.1
changelog:
  - 17.16 version
  - in install stage, copy documentation files after make install
    completion as it modifies some HTML documentation internal URLs
  - in desktop entry, use the shorter moodss application name
  - added diskstats, hddtemp and usb modules
  - pci module now uses event based and threaded library and is thoroughly
    documented to serve as remote capable module reference implementation
  - made several modules compatible with Linux kernel 2.6
  - moved modules and development sections out of moodss.htm HTML
    documentation into modules.htm and develop.htm separate files
  - see CHANGES in documentation directory for complete list of changes


author: Jean-Luc Fontaine <jfontain@free.fr> 17.15-0.fdr.2
changelog:
  - in install stage, copy documentation in a custom directory to avoid
    listing all the documentation files in the files section
  - directly generate desktop file with a fedora header
  - simply list the moodss data directory instead of the file it contains


author: Jean-Luc Fontaine <jfontain@free.fr> 17.14-0.fdr.1
changelog:
  - 17.14 version
  - included predefined dashboard for system in data directory
  - application desktop menu now uses predefined dashboard for system


author: Jean-Luc Fontaine <jfontain@free.fr> 17.12-0.fdr.5
changelog:
  - changed release tag from 0.fdr.0.X to 0.fdr.X
  - replaced %__sed and %__install by sed and install
  - added -p argument to install to preserve timestamps
  - no longer use full path for chkconfig as it is part of root path


author: Jean-Luc Fontaine <jfontain@free.fr> 17.12-0.fdr.4
changelog:
  - removed redundant Release and Epoch tags
  - combined macros in files section for %_sysconfdir/moomps and
    %_sysconfdir/moomps/rc


author: Jean-Luc Fontaine <jfontain@free.fr> 17.12-0.fdr.3
changelog:
  - removed optional sqlite binary library inclusion since sqlite rpm is
    likely to become part of Fedora
  - removed RCS line
  - set Epoch to 0 and removed it from Release
  - used a full macroless URL to the source tarball
  - removed Packager (not used in Fedora)
  - used z release instead of u in blt requirement
  - used rm instead of %__rm macro
  - included the moomps/rc file as a normal %config file
  - no longer generate a default moomps/rc file as it is now done in the
    make install stage
  - use wildcards in manual pages files entries
  - specified documentation files explicitely instead of using
    %_defaultdocdir
  - added build stage for dynamic libraries and global scripts generation
  - attributes for the moomps configuration directory and rc file now set
    using the %attr macro
  - moomps user created in pre installation stage instead of post
  - use service command to stop moomps instead of using a little script


author: Mike A. Harris <mharris@redhat.com> 1.0.1.4-1
changelog:
  - Updated xorg-x11-drv-apm to version 1.0.1.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Ivana Varekova <varekova@redhat.com> - 50:6.0_20061121-1
changelog:
  - change license tag
  - update to 6.0_20061121
  - add documentation
  - use configure script to create Makefile
  - update default buildroot
  - some minor spec changes


author: Aurelien Bompard <gauret[AT]free.fr> 0:0.1-0.fdr.2
changelog:
  - Licence is GPL not LGPL
  - Fix -devel description and requirements
  - Switch group to "System Environment/Libraries"


author: - Chris Chabot <chabotc@xs4all.nl> - 0.8.1-3
changelog:
  - Added desktop file utils to PreReq, and used to install .desktop file
    with Fedora category
  - Copy icon files to _datadir/pixmaps so desktop envirioment can find them
  - Quick fix up to .desktop file to Terminal=false instead of Terminal=0
    following freedesktop standard
  - Removed ldconfig from post,prerun and postrun, this package has
    no .so's


author: - Chris Chabot <chabotc@xs4all.nl> - 0.8.1-2
changelog:
  - Added gconf uninstall rules on upgrade and uninstall
  - Commented out hard requirements, leaving them to rpm's autodep


author: - Chris Chabot <chabotc@xs4all.nl> - 0.8-3
changelog:
  - Moved "rm -rf $RPM_BUILD_ROOT" from prep to install
  - Removed "unset GCONF_DISABLE_MAKEFILE_SCHEMA_INSTALL" since
    this shouldn't be required (it has its own shell env)


author: - Chris Chabot <chabotc@xs4all.nl> - 0.8-2
changelog:
  - Changed 
    /usr/bin/make \
  	prefix=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr \
  	exec_prefix=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr \
  	bindir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/bin \
  	sbindir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/sbin \
  	sysconfdir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/etc \
  	datadir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/share \
  	includedir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/include \
  	libdir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/lib64 \
  	libexecdir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/libexec \
  	localstatedir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/var \
  	sharedstatedir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/com \
  	mandir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/share/man \
  	infodir=/var/tmp/buoh-0.8.2-2.fc7-root-mockbuild/usr/share/info \
    install into make install DESTDIR=$RPM_BUILD_ROOT,
    was a bug in the makefiles that caused make install to install
    buoh's icons and xml files in /usr/share, not in the build root.


author: Francois Aucamp <faucamp@csir.co.za> - 0.3-3
changelog:
  - Added "Requires: kdebase" as this package is useless without kwin
  - Install the "ugly" theme (moved it from %doc)
  - Created "remove_theme_paths_button" patch to remove the config dialog's "set theme paths" button
  - Created "default_theme" patch to set a first-time default theme
  - Fixed the Bushido-Yellow theme's masks to make it usable
  - Install the "Bushido-Yellow" theme by default
  - Added "dekorator.fedora" to %doc to explain why some extra themes are modified/omitted
  - Created "config_help_tab" patch to make the config dialog use HTML help (and fix some typos)


author: Matěj Cepl <mcepl@redhat.com> 0.3.1-3
changelog:
  - don't gzip manpage -- rpmbuild does it automagically
  - category should be Application/Productivity (or
    non-Productivity in this case, but that's not included into RH
    standards :-))
  - generate set_dir.py (according to the upstream .spec file)
  - fixed cs.po


author: Fabrice Bellet <fabrice@bellet.info> 0.9.10-2
changelog:
  - Move documentation and license to a better place and mark it as %doc
  - Fix wrong end-of-line encoding in some doc files


author: Anthony Green <green@redhat.com> 0.99.3-8
changelog:
  - Enable optimization (oops).
  - Add ardour-no-sse.patch to disable use of build-system dependent 
    hardware features (SSE, MMX, etc).


author: Anthony Green <green@redhat.com> 0.99.3-3
changelog:
  - Remove PlanetCCRMA changelogs (rpmlint was complaining)
  - Escape macros in changelog.
  - Remove useless rm in %build section.
  - Don't install useless README file.
  - Clean up BuildRequires and %files sections.


author: Anthony Green <green@redhat.com> 0.99.3-1
changelog:
  - Update sources to 0.99.3.
  - Add linudoc-tools dependency.
  - Set USE_SSE_EVERYWHERE and BUILD_SSE_OPTIMIZATIONS at build time.
  - Replace some macro command usage.


author: Anthony Green <green@redhat.com> 0.99.2-2
changelog:
  - Fix ardour URL.  Add scons smp build flags.
  - Own %{_sysconfdir}/ardour.
  - Standardize on $RPM_BUILD_ROOT usage.
  - Remove gcc BuildRequires.


author: Anthony Green <green@redhat.com> 0.99.2-1
changelog:
  - Update sources. Build for Fedora Extras. Derived from Fernando
    Lopez-Lezcano's PlanetCCRMA package.


author: Paul Howarth <paul@city-fan.org> - 0.94-3
changelog:
  - remove redundant BR: perl
  - honor %{_smp_mflags}
  - include license text
  - add BR: perl(DBD::SQLite) for better test cover


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.3.10-4
changelog:
  - link with -release %{version} libtool flag instead of -version, so that we
    get unique soname's for each upstream release. (Upstream gives 0 ABI
    guarantees)
  - fix many undefined-non-weak-symbol's, some still remain though, see bz 208678
  - work around the "thesky" bug, see bz 208678


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006.08.28-4
changelog:
  - Add patch to build with RPM_OPT_FLAGS and remove -s from LDFLAGS
      Contribution of Ville Skyttä <ville[DOT]skytta[AT]iki[DOT]fi>
      Fix #227757
    - Fix typo in french summary


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006.08.28-1
changelog:
  - New upstream version
    - Use macro style instead of variable style
    - Install missing modules. Fix #206602


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006.04.24-5
changelog:
  - Change name
    - Use %{_docdir} instead of %{_datadir}/doc
    - Use %find_lang
    - Update desktop database
    - Convert MSDOS EOL to Unix EOL
    - Remove BR utrac


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006-04-24-0-4
changelog:
  - Patch to suppress extra qualification compile time error on FC5
    - BR utrac to convert MSDOS files before applying patch
      This will be remove for the next upstream version.


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006-04-24-0-3
changelog:
  - Install help in /usr/share/doc/kicad/ as the path is hardcoded
      in gestfich.cpp
    - Add desktop file


author: Alain Portal <aportal[AT]univ-montp2[DOT]fr> 2006-04-24-0-2
changelog:
  - Add a second tarball that contains many things that are not included in
      the upstream source tarball such components and footprints librairies,
      help, localisation, etc.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-19
changelog:
  - Fix PostScript breakage following the non-monetary numeric format from
    current locale. (#231916)


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-16
changelog:
  - paps-0.6.6-exitcode.patch: exit immediately with proper exit code
    when unrecoverable error occurs. (#208592)


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-10
changelog:
  - paps-0.6.6-cpilpi.patch: add --cpi and --lpi option to support the characters
    per inch and the lines per inch.
  - paps-cups.patch: add cpi and lpi support.


author: Tim Waugh <twaugh@redhat.com> - 0.6.6-9
changelog:
  - Fixed font-option patch.
  - Adjusted CUPS patch: CUPS invokes the filter with the destination
    printer name in argv[0], not the binary name.
  - CUPS filter lives in CUPS_SERVERBIN, which is /usr/lib/cups on all
    architectures -- not %{_libdir}/cups.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-8
changelog:
  - use dist tag.
  - paps-cups.patch: applied to work paps as CUPS filter.
  - paps-0.6.6-encoding.patch: null-terminates the output.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-5
changelog:
  - paps-typo-font-scale.patch: backported from CVS.
  - paps-0.6.6-font-option.patch: integrated --font-family and --font-scale
    options to --font.
  - paps-0.6.6-lcctype.patch: follow LC_CTYPE to determine the default language.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-2
changelog:
  - paps-0.6.6-encoding.patch: support --encoding option to be able to convert
    the input file to UTF-8.
  - paps-0.6.6-segfault.patch: fixed a possible segfault issue when reading is
    failed.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.5-1
changelog:
  - New upstream release.
    - paps-0.6.3-fix-pagesize.patch: removed. it has been merged in upstream.
    - paps-0.6.3-goption.patch: removed. it has been merged in upstream.
    - paps-0.6.3-header.patch: removed. it has been merged in upstream.
  - paps-makefile.patch: rework to be applied.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.3-4
changelog:
  - paps-0.6.3-formfeed.patch: applied to deal with the formfeed mark properly.
  - paps-0.6.3-goption.patch: rewritten option parser using GOption. and segfault
    gone as well. (#187205)
  - paps-0.6.3-header.patch: applied to support the output of the page header.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.2-1
changelog:
  - New upstream release.
    - the bitmap font is now ignored. (#176206)
  - paps-0.6.2-fix-bufferoverflow.patch: applied to fix the buffer overflow.


author: David Woodhouse <dwmw2@infradead.org> 003-2
changelog:
  - Package review. Use $RPM_OPT_FLAGS, ship man page, etc.
  - Complete documentation, add sample bcm43xx.modprobe file


author: <gilboad AT gmail DOT com> - 0.6.4-1
changelog:
  - 0.6.4
  - Fix broken info installation.
  - Enable SMP build.
  - Preserve the source time-stamp.
  - Replace install with %{__install}.


author: <gilboad AT gmail DOT com> - 0.6.3-9
changelog:
  - Do -not- delete cgdb.txt - needed by binary.
  - Use the original htdocs instead of htmldocs.
  - Preserve timestamps.
  - Fix missing URL in imported cgdb.png.


author: <gilboad AT gmail DOT com> - 0.6.3-8
changelog:
  - Remove INSTALL
  - Move cgdb.txt to %docs. (Where index.html can see it.)
  - Move htdocs to %docs.
  - Fix broken cgdb.png file.


author: <gilboad AT gmail DOT com> - 0.6.3-4
changelog:
  - Remove redundant dependencies.
  - Add missing ownership.
  - Fix texinfo pre/post.
  - Fix %doc in changelog.


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.16-1
changelog:
  - fix override_dest_module_location() for historical distro versions
  - don't run weak-modules if it doesn't exist


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.14.1
changelog:
  - After upgrading from older DKMS versions to 2.0.14, any previously
    installed modules wouldn't show status properly, and wouldn't
    uninstall properly, due to the new policy of using /extras/ and
    /updates/.  Needed to take that into account and look in both places.
  - SuSE puts weak-modules in /usr/lib/module-init-tools not /sbin.


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.13.2
changelog:
  - RHEL5 weak module recognition with new state installed-weak
  - autoinstaller recognizes installed-weak and doesn't rebuild
  - RHEL5 and SLES10 and higher weak module code expects modules to go
    into /lib/modules/$kern/{extra,updates} respectively, so force that.


author: Matt Domsch <Matt_Domsch@dell.com>
changelog:
  - patch from http://qa.mandriva.com/show_bug.cgi?id=27985 assigns new
    modprobe.conf alias ordinals starting at zero.


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.13.1
changelog:
  - properly create driver disks for Fedora Core 6 and RHEL5
  - make .iso, .tar, and floppy .img driver disks for Red Hat and SuSE
  - set CLEAN properly even if MAKE[] isn't set.
  - fix install.sh buglet installing the manpage


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.10.1-1
changelog:
  - fix munging of /etc/sysconfig/kernel INITRD_MODULES= line
    so it doesn't move already-present entries to the end


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.9.1-1
changelog:
  - patch from Eric Devolder enables mkinitrd for Debian Sarge
  - include debian/ directory in upstream tarball


author: Matt Domsch <Matt_Domsch@dell.com> 2.0.8.3
changelog:
  - look to DKMS_DIRECTIVE* environment variables to override dkms.conf settings
  - don't create/remove (unused) /var/lock/subsys/dkms files in autoinstaller


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.8.2
changelog:
  - Multi driver suse driver disk support (thanks to Sreenivas.Bagalkote@engenio.com)
  - Cleanup tempdir when ldtarball fails


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.5.9
changelog:
  - FIXED BUG, when only some modules have original_modules, ARCHIVE_PREF3 wasn't getting reset causing big problems


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.4.3
changelog:
  - Allow MAKE_MATCH[0] to decide if MAKE[0] will be used
  - Add Taroon check in template-dkms-mkrpm.spec for ia32e detection


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.3.3
changelog:
  - Added quotes to $kernel_config when checking variable
  - Tweak the multiowned arch detection workaround to deal with no ownership


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.2.5
changelog:
  - DKMS ldtarball arch fix for changed Andreas 2.0.2 code
  - Workaround for Red Hat's new source symlink in 2.6.9
  - All 'cd -' now output to /dev/null


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.1.2-1
changelog:
  - Charles Duffy's fix for multiple rpms owning /lib/modules/kernel...
  - Andreas Gruenbacher's removal of IFS usage 
  - Andreas Gruenbacher's reorganizing prepare check into prepare_kernel
  - Andreas Gruenbacher's patch to cut down on line length by using $base_dir
  - fixed $base_dir so it gets set after setup_kernels_arches


author: Andreas Gruenbacher <agruen@suse.de>
changelog:
  - patch to remove tick usage
  - patch to rewrite version comparison code
  - patch to switch to usage of case, remove use of grep -c, remove use of IFS 
  - patch to change handling of stderr


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 2.0.0-1
changelog:
  - Output to stderr is now >> and not >
  - Added kludge to allow redhat1 driver disks with BOOT kernel modules
  - Allow cross arch building on 2.6 if --kernelsourcedir is passed
  - Generic make commands now respect --kernelsourcedir
  - Bumped dkms_dbversion to 2.0.0


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.96.01-1
changelog:
  - Look for /etc/SuSEconfig also to know if its a SuSE box
  - If no make command, set the clean command


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.95.11-1
changelog:
  - Split modulesconf_modify to separate add and remove functions
  - Added support for /etc/modprobe.conf


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.95.06-1
changelog:
  - Buchan Milne's Mandrake prep support patch
  - Buchan Milne's macro additions to template-dkms-mkrpm.spec
  - Buchan Milne's typo corrections in mkrpm
  - Buchan Milne's change to how mkrpm works (mktarball happen in rpm prep)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.94.16-1
changelog:
  - Added a dependency on modutils for usage of modinfo
  - Added version sanity check
  - dkms_autoinstaller now check for sanity of version
  - Changed conversion algorithm for /var/dkms to /var/lib/dkms
  - Changed all warning to get to stderr
  - set_module_suffix doesn't use version_checker because its too slow


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.94.06-1
changelog:
  - Reworked version checking to handle non-digit characters
  - Added coreutils as a dependency
  - Create a tempdir in mkdriverdisk, whoops (thanks Charles Duffy)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.94.03-1
changelog:
  - dkms_dbversion belongs in /var/lib/dkms (thanks Thomas Palmieri)
  - Added a version checking subroutine
  - Removed gt2dot4 variable in favor of kernel version checking
  - MAKE is no longer required.  If none specified, it uses a default.


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.93.14-1
changelog:
  - Fixed bug when find finds more than one thing (thanks Paul Howarth)
  - Changed arch detection code to first try RPM which always will get it right (thanks Vladimir Simonov)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.93.12-1
changelog:
  - Initial mkrpm is working
  - Added --source-only option to mktarball
  - mkrpm handles --source-only
  - Updated manpage


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.92.24-1
changelog:
  - Continue rework of kernelver/arch handling
  - Added PATH fix (thanks Andrey Ulanov <andrey.ulanov@acronis.com>)
  - config_contents should not be local (thanks Andrey Ulanov)
  - If no config in /configs, just use .config (thanks Andrey Ulanov)
  - match now pays attention to --kernelsourcedir


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.92.04-1
changelog:
  - Added STRIP[] directive.  By default dkms now runs strip -g on all built modules.
  - Fix set_module_suffix in dkms build
  - Changed /etc/dkms_framework.conf to /etc/dkms/framework.conf
  - Added reload into dkms_autoinstaller to limit Mandrake error messages
  - Moved /var/dkms to /var/lib/dkms !!!!!!!!!!!!!!!!


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.91.18-1
changelog:
  - Added --installtree option to specify different install location besides /lib/modules
  - Took Charles Duffy's advice and removed brackets on error messages


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.91.11-1
changelog:
  - Added build time check for gcc and make if there is a build failure
  - You can now specify --archive to mktarball to control the naming of the made tarball (thanks Vladimir Simonov)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.90.45-1
changelog:
  - Pass --targetarch to dkms_mkkerneldoth (thanks to Vladimir Simonov <validimir.simonov@acronis.com>)
  - Moved arch detection into a function called detect_arch


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.90.32-1
changelog:
  - Completing arch awareness and transition scripts
  - Created upgrade_dkms_archify.sh to update DKMS trees for arch support


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.09.21-1
changelog:
  - Improved readability of install and uninstall text to the screen
  - You can now specify multiple actions in the same command


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.09.05-1
changelog:
  - Added arch_used as part of the filename of a tarball created by mktarball
  - If multiple original modules exist in a single kernel, the one in /updates is preferred
  - Changed multiple original module handling to move out and store all collisions


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.09.01-1
changelog:
  - Changed 2.6 prep prepare-all target usage to make modules_prepare
  - Changed 2.6 make command to always use M= as this is fixed in 2.6.6-rc3-bk5


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.09-1
changelog:
  - If module build exit status is bad, die accordingly
  - 2.6 kernel prep changes (not quite there yet, still broken)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.08.06-1
changelog:
  - Added BUILD_EXCLUSIVE_KERNEL & BUILD_EXCLUSIVE_ARCH directives for dkms.conf
  - Tweaked dkms_autoinstaller to more gracefully handle a build failure


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 1.07-1
changelog:
  - Added work-around to recognize ia32e kernel config instead of x86_64
  - Got rid of start and stop functions which were no-ops anyway


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.99.01-1
changelog:
  - Only edit /etc/modules.conf if remake_initrd is set or if this is the last uninstall and no original module exists
  - Added MODULES_CONF_OBSOLETE_ONLY array directive in dkms.conf
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.45.01-1
changelog:
  - Added kernel config prepping for hugemem kernel (thanks Amit Bhutani)
  - modules.conf only now gets changed during install or uninstall of active module


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.44.05-1
changelog:
  - Changed MODULES_CONF_ALIAS_TYPE to an array in dkms.conf
  - Added MODULES_CONF_OBSOLETES array in dkms.conf
  - Reworked modules_conf_modify to make use of OBSOLETES logic
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.41.15-1
changelog:
  - If depmod or mkinitrd fail during install, automatically go back to built state
  - Warn heavily if mkinitrd fails during uninstall


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.41.10-1
changelog:
  - Added Red Hat specific kernel prep to avoid make dep (Thanks Matt Domsch)
  - Added dkms_mkkerneldoth script to support RH kernel prep
  - Moved dkms from /sbin/ to /usr/sbin
  - Fixed typo which caused original_module not to get replaced on uninstall
  - No longer edit Makefiles, just specify KERNELVERSION=$kernel_version on the command line
  - Removed unnecessary depmod during uninstall


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.40.05-1
changelog:
  - No longer copy dkms.conf into /var/dkms tree, just go to the source_tree so as to reduce duplication
  - Got rid of --post-add, --post-build, --post-install and --post-remove
  - Replaced the above with DKMS directives POST_ADD, POST_BUILD, POST_INSTALL, POST_REMOVE
  - Fixed ldtarball and mktarball to no longer look for these duplicate files
  - Added a sample.conf for /usr/share/doc
  - Updated dkms_dbversion to 1.01 from 1.00 due to these changes
  - Update the man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.39.17-1
changelog:
  - Added diff checking in status command in case modules are overwritten by someone else
  - Fixed already built error message in build_module
  - Changed build-arch to noarch
  - Updated sample.spec
  - Change dest_module_location to not get prefaced by /lib/modules/$kernel_version
  - When saving old initrd, copy it instead of moving it in case new one doesn't build
  - Only create source symlink during loadtarball if --force or if it doesn't exist
  - Decide to completely remove during remove_module after doing find with maxdepth of 0 not 1


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.39.08-1
changelog:
  - Reworked mktarball format to remove dependence on /var/dkms and /usr/src
  - Reworked ldtarball to match new tarball format
  - Ldtarball now uses --archive=tarball-location flag instead of --config flag
  - Ldtarball can now load any old source tarball as long as it contains a good dkms.conf
  - Added --kernelsourcedir cli option to provide alternate location for kernel source
  - Driver disk files are now looked for in /redhat_driver_disk
  - Added $tmp_location specifiable in /etc/dkms_framework.conf to specify your /tmp dir (default /tmp)
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.38.03-1
changelog:
  - Fixed tmp_dir_name typo in ldtarball
  - Fixed mkdriverdisk to correctly create kernel/module structure
  - Don't expect a rhdd-6.1 file for RH driver disk, dkms will create it
  - Remove mkdriverdisk warning on non BOOT kernels
  - Moved driver_disk directory location to underneath $module_version
  - mkdriverdisk can now accept multiple kernel versions
  - Updated man page with info about $dkms_tree and $source_tree as dkms.conf variables


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.37.10-1
changelog:
  - Don't allow installs of modules onto non-existant kernels
  - Suppressed stderr on some commands
  - Fixed brain-dead bug for REMAKE INITRD
  - During uninstall, dont remake initrd if it was not installed
  - ldtarball into unique tempdir and delete it when finished


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.37.04-1
changelog:
  - Changed PATCH to array based system (added PATCH_MATCH array)
  - PATCHes can now be matched against regular expressions, not just substrings
  - Changed MODULES_CONF to array based system
  - CHANGED MAKE to array based system (added MAKE_MATCH array)
  - MAKEs can now be matched against regular expressions, not just substrings.
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.36.10-1
changelog:
  - Changed autoinstaller bootup priority from 08 to 04
  - Changed invoke_command routine to use mktemp for better security
  - Changed invoke_command in dkms_autoinstaller too


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.36.02-1
changelog:
  - Got rid of MODULE_NAME: replaced with BUILT_MODULE_NAME, DEST_MODULE_NAME arrays
  - Got rid of LOCATION: replaced with BUILT_MODULE_LOCATION, DEST_MODULE_LOCATION arrays
  - Update man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.35.02-1
changelog:
  - Added PACKAGE_NAME, PACKAGE_VERSION requirements to dkms.conf for gmodconfig use
  - Fixed creation of /var/dkms before cp of dkms_dbversion in install.sh


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.34.01-1
changelog:
  - Added dkms_autoinstaller service (builds module on boot if AUTOINSTALL="yes" in dkms.conf)
  - DKMS usage no longer sent to std_err
  - Added --no-prepare-kernel cli option


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.33.02-1
changelog:
  - Fixed quote bugs in match (Reported by: John Hull <john_hull@dell.com>) 
  - Added Fred Treasure to the AUTHORS list
  - Added dkms_dbversion file to DKMS tree to track architecture of dkms db layout


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.32.04-1
changelog:
  - Added mkinitrd support for SuSE (etc_sysconfig_kernel_modify)
  - Added generic make command for kernel >2.4 (make -C <path-to-kernel-source> SUBDIRS=<build dir> modules)
  - Fixed kernel prepare to do Red Hat/Generic by default
  - Only do make dep if < 2.5


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.31.04-1
changelog:
  - Modified the Red Hat prep routine to be smaller and more robust (including summit support)
  - Added sample.spec to the sources for /usr/share/doc
  - If you save a .config before make mrproper, return it right afterwards
  - Updated the man page


author: Gary Lerhaupt <gary_lerahupt@dell.com> 0.30.17-1
changelog:
  - Added a remake_initrd function to keep SuSE from doing wrong things
  - If you know the correct right steps for rebuilding SuSE initrds, please let me know!
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.30.15-1
changelog:
  - Added a native readlink function to make sure it exists
  - Added a mkdir -p to $location to make sure it exists
  - Added --directive


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.30.05-1
changelog:
  - Added kernel preparation support for SLES/United Linux (Many thanks to: Fred Treasure <fwtreas@us.ibm.com>)


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.29.09-1
changelog:
  - On remove, to remove all kernel versions you must now specify --all
  - Added grep, cpio and gzip to the Requires of the RPM
  - Added cleaning kernel tree (make mrproper) after last build completes
  - Before prepare kernel, the current .config is stored in memory to be restored later
  - Added a verbose warning to the status command to remind people it only shows DKMS modules
  - Added /etc/dkms_framwork.conf for controlling source_tree and dkms_tree
  - Added the undocumented --dkmstree and --sourcetree options for cli control of these vars
  - When looking for original modules, dkms now employs the find command to expand search past $location
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.28.04-1
changelog:
  - Fixed ldtarball/mktarball to obey source_tree & dkms_tree (Reported By: Jordan Hargrave <jordan_hargrave@dell.com>)
  - Added DKMS mailing list to man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.27.05-1
changelog:
  - Changed NEEDED_FOR_BOOT to REMAKE_INITRD as this makes more sense
  - Redid handling of modifying modules.conf 
  - Added MODULE_CONF_ALIAS_TYPE to specs


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.25.03-1
changelog:
  - Added renaming ability to modules after builds (MODULE_NAME="beforename.o:aftername.o")
  - Started adding mkdriverdisk support
  - Added distro parameter for use with mkdriverdisk
  - Now using readlink to determine symlink pointing location
  - Added redhat BOOT config to default location of config files
  - Fixed a bug in read_conf that caused the wrong make subdirective to be used
  - Remove root requirement for build action


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.23.16-1
changelog:
  - Removed the sourcing in of /etc/init.d/functions as it was unused anyway
  - Implemented generic patching support
  - Updated man page
  - Fixed timing of the creation of DKMS built infrastructure in case of failure


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.23.11-1
changelog:
  - Builds now occur in /var/dkms/$module/$module_version/build and not in /usr/src
  - Fixed the logging of the kernel_config


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.23.01-1
changelog:
  - Started adding patch support
  - Redid reading implementation of modules_conf entries in dkms.conf (now supports more than 5)
  - Updated man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.22.06-1
changelog:
  - Module names are not just assumed to end in .o any longer (you must specify full module name)
  - At exit status to invoke_command when bad exit status is returned


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.20.06-1
changelog:
  - Added --config option to specify where alternate .config location exists
  - Updated the man page to indicate the new option.
  - Updated the spec to allow for software versioning printout
  - Added -V which prints out the current dkms version and exits


author: Gary Lerhaupt <gary_lerhaupt@dell.com> 0.18.04-1
changelog:
  - Added support for multiple modules within the same install
  - Added postadd and fixed up the man page


author: Gary Lerhaupt <gary_lerhaupt@dell.com>
changelog:
  - Fixed make.log path error when module make fails
  - Fixed invoke_command to work under RH8.0
  - DKMS now edits kernel makefile to get around RH8.0 problems


author: Gary Lerhaupt <gary_lerhaupt@dell.com>
changelog:
  - Version 0.13: added match option
  - Version 0.14: dkms is no longer a SysV service
  - Added depmod after install and remove
  - Version 0.15: added MODULES_CONF directives in dkms.conf


author: Gary Lerhaupt <gary_lerhaupt@dell.com>
changelog:
  - Changed the name to DKMS
  - Moved original_module to its own separate directory structure
  - Removal now does a complete clean up


author: Gary Lerhaupt <gary_lerhaupt@dell.com>
changelog:
  - Split build into build and install
  - dkds.conf is now sourced in
  - added kernelver variable to dkds.conf


author: David Walluck <david@anti-microsoft.org> 1.2-0.b8.2jpp
changelog:
  - remove servlet dependency (if anyone wants to add this as a separate
    package and do the tomcat integration, be my guest)


author: David Walluck <david@anti-microsoft.org> 1.2-0.b8.1jpp
changelog:
  - rename to bsh
  - add manual
  - add Changes.html to %doc
  - add bsh and bshdoc scripts
  - add %dir %{_datadir}/%{name} to main package
  - correct test interpreter and make bsh files executable


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.01-2jpp
changelog:
  - additional sources in individual archives
  - versioned dir for javadoc
  - no dependencies for javadoc package
  - stricter dependency for demo package
  - section macro


author: David Lutterkort <dlutter@redhat.com> - 0.7.1-3
changelog:
  - Bring in accordance with packaging guidelines
  - Changed license from 'Distributable' to 'Ruby License'


author: Paul Howarth <paul@city-fan.org> 1.2.2-2
changelog:
  - Upstream now installs correctly into %{_libdir} rather than %{_prefix}/lib
    so there's no need to override the destination directory in %install; this
    change gets the plugins installed into the correct directory too (#232278)


author: Paul Howarth <paul@city-fan.org> 1.2.0.1-1
changelog:
  - Update to 1.2.0.1
  - Update source URL
  - Make some buildreqs versioned
  - Add new buildreqs and reqs avahi-sharp, dbus-sharp
  - Create -devel subpackage for plugins stuff


author: Paul Howarth <paul@city-fan.org> 1.0.7-1
changelog:
  - Update to 1.0.7
  - Conditionalize gtk-sharp2 buildreqs for FC-5 and other releases
  - Tidy spec changelog


author: Paul Howarth <paul@city-fan.org> 1.0.6-2
changelog:
  - Make package arch-specific; files in %{_libdir} rather than %{_prefix}/lib
    See: http://www.redhat.com/archives/fedora-packaging/2006-July/msg00013.html
  - Expand tabs to shut rpmlint up


author: Paul Howarth <paul@city-fan.org> 1.0.5-2
changelog:
  - Spec file cleanups (#177580)
  -   No need to use update-desktop-database (no MIME type in desktop file)
  -   No need to remove .la files (artefact from old package)
  -   Own directories %{_datadir}/gnome/{,help/} and %{_datadir}/omf/
  -   Put icon in %{_datadir}/icons/hicolor/22x22/apps directory rather than
      %{_datadir}/pixmaps, and update icon cache post-install/removal
  -   Add doc files AUTHORS ChangeLog COPYING* README TODO
  - Add missing buildreq gettext
  - Remove redundant MONO_SHARED_DIR assignments in %build and %install
  - Don't redefine %{_libdir}, it's not needed
  - Prevent creation of debuginfo package, which would be empty for a mono app


author: Paul Howarth <paul@city-fan.org> 1.0.4-1
changelog:
  - Update to 1.0.4
  - Fix URL/Source tag mix-up
  - Use Fedora Extras standard buildroot
  - Buildreq/Req gtk-sharp2 rather than gtk-sharp
  - Consolidate scriptlet deps
  - Use --disable-dependency-tracking with configure to speed up build
  - Expand %description
  - Remove buildroot unconditionally in %clean and %install
  - Use explicit paths for all commands
  - Remove build-time scrollkeeper data, which contains buildroot traces
  - Tidy up %files section
  - Add %{?dist} tag
  - Hardcode %{_libdir} as /usr/lib for mono apps
  - Add %defattr in %files list


author: Steven Pritchard <steve@kspei.com> 0.07-4
changelog:
  - Reformat to match cpanspec output.
  - Use fixperms macro instead of our own chmod incantation.
  - BR ExtUtils::MakeMaker.


author: Peter Gordon <peter@thecodergeek.com> - 0.12-4
changelog:
  - Gaim has been renamed to Pidgin: adjust the sources accordingly.  
  - Add patch based on the Arch Linux packaging to make the sources and build
    scripts properly use the new Pidgin/Libpurple nomenclature of what was
    formerly called Gaim.
    + renamed-to-pidgin.patch
  - Drop gtk2-devel build dependency (pulled in by libnotify-devel).
  - Update Source0 to point to simpler SourceForge URL.


author: Peter Gordon <peter@thecodergeek.com> - 0.12-2
changelog:
  - Shorten line lengths in %description (and rewrite it a bit)
  - Add gaim runtime requirement so that the parent directory of the plugin in
    %{_libdir}/gaim is properly owned
  - Removed unnecessary perl(XML::Parser) and gettext BuildRequires
  - Add TODO to %doc


author: Rex Dieter <rexdieter[AT]users.sf.net> 3.5.3-6
changelog:
  - main(core), -icons, -extras subpkgs.
    -icons so we don't push ~11MB data on every pkg respin, and leave ability 
    to someday make it .noarch
    -extras for xscreensaver bits (see bug #195480)


author: Rex Dieter <rexdieter[AT]users.sf.net> 3.5.3-5
changelog:
  - patch for kdeclassic missing Inherits=  (even though it *should* already
    implicity Inherits=hicolor ?)


author: Rex Dieter <rexdieter[AT]users.sf.net> 3.5.3-4
changelog:
  - BR: libGL-devel libGLU-devel (workaround qt bug #193741)
  - Group: System Environment/Desktop -> Amusements/Graphics
  - drop unused %?beta macro


author: Rex Dieter <rexdieter[AT]users.sf.net> 3.5.3-3
changelog:
  - (Build)Requires: xscreensaver-base xscreensaver-extras xscreensaver-gl-extras
  - icons: own %_datadir/icons (until something else sane does, like filesystem)
  - icons: drop Requires: kdelibs
  - icons: Requires: hicolor-icon-theme, %_datadir/icons/default/index.theme
  - make work on legacy releases too


author: Than Ngo <than@redhat.com> 3.3.2-0.2
changelog:
  - add correct paths for xscreensaver, xscreensaver-4.18-14 stores the
    config files and graphic hacks in %_libdir/xscreensaver/config/hacks
    and %_libexecdir/xscreensaver/hacks/


author: Nils Philippsen <nphilipp@redhat.com> - 0.10-1
changelog:
  - version 0.10
  - add BR: perl, exiv2-devel, gettext
  - split standalone tools and GIMP plugin in Rawhide


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1.20.3-8
changelog:
  - Submit to Fedora Extras since it will build without the patented smpeg
    and none of the packages currently using perl-SDL need the smpeg part.
  - Drop smpeg BR (see above).
  - Cleanup BR's a bit to match FE-guidelines


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.20.3-0.lvn.3
changelog:
  - Build with SDL_gfx support by default, add "--without gfx" build option.
  - Patch to sync with SDL_gfx >= 2.0.12 API changes (bug 374).


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.20.3-0.lvn.2
changelog:
  - Add "--without mixertest" build option for build roots without audio devices,
    and "--without tests" option to disable tests altogether, needed in FC1
    due to buggy libtiff package (bug 107).


author: Ville Skyttä <ville.skytta at iki.fi> - 0:1.20.0-0.lvn.4
changelog:
  - Partial specfile rewrite according to current fedora.us Perl spec template.
  - Use tarball + patch from Debian.
  - Borrow libGLU fix from Ian Burrell and Matthias Saou, and adjust it a bit:
    http://lists.freshrpms.net/pipermail/freshrpms-list/2003-December/006843.html
  - BuildRequire SDL_ttf-devel.


author: Phillip Compton <pcompton at proteinmedia dot com> 0:1.20.0-0.fdr.3
changelog:
  - Applied patch to spec from Ville Skyttä changeing:
  - BuildRequires: smpeg-devel.
  - Run make tesst during build.
  - Get rid of unneeded files in installation directories.
  - Make installed files writable so that non-root strip works.


author: Jens Petersen <petersen@redhat.com> - 0.2.1-1
changelog:
  - update to 0.2.1 release
  - scim-m17n-0.2.0-unique-uuid.patch no longer needed
  - add scim-m17n-us-keyboard-211266.patch to follow scim keyboard config
    (suzhe, #211266)


author: Jens Petersen <petersen@redhat.com> - 0.1.4-3
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - specify filelist more precisely


author: Peter Gordon <peter@thecodergeek.com> - 3.3.1-6
changelog:
  - Split shared libraries into a -libs subpackage to properly handle multilib
    setups. (This precludes the further need to %ghost the byte-compiled
    themeupdate scripts which was introduced in the previous release.)
  - Fix handling of the startup_notification build conditional. It will actually
    work properly now. :)
  - Remove the hardcoded RPATH using some sed invocations from the packaging
    guidelines.


author: Peter Gordon <peter@thecodergeek.com> - 3.3.1-4
changelog:
  - Don't own %{_datadir}/gnome/wm-properties anymore, as that's now owned
    by gnome-session in Rawhide and we should not have ownership conflicts with
    Core packages.


author: Peter Gordon <peter@thecodergeek.com> - 3.3.1-2
changelog:
  - Allow building with startup-notification as an rpmbuild option (though it is
    disabled by default as recommended by upstream).


author: Peter Gordon <peter@thecodergeek.com> - 3.3-1
changelog:
  - Update to 3.3 final release from upstream
  - Remove the slew of versioning macros, as it's overkill for this and just adds
    unneeded complexity to the spec.


author: Peter Gordon <peter@thecodergeek.com> - 3.3-0.8.rc2
changelog:
  - Unconditionalize the BuildRequires for modular X.org, since it's branched
    for a specific Fedora release.


author: Peter Gordon <peter@thecodergeek.com> - 3.3-0.5.rc2
changelog:
  - Own all created theme directories (#195292)
  - Fix previous review bug IDs in this %changelog to point to the recreated
    review bug (due to recent bugzilla outage)


author: Chris Ricker <kaboom@gatech.edu> 0:2.3.1-0.fdr.5
changelog:
  - Need to own /etc/X11/gdm/Sessions && /etc/X11/gdm (#440)
  - Need to conflict with fluxbox (#422 / #440)


author: Chris Ricker <kaboom@gatech.edu> 0:2.3.1-0.fdr.1
changelog:
  - Add switchdesk support
  - Add display manager support
  - Fix NLS build on Cambridge
  - Fedora'ize the spec


author: Eduardo Sanchez <sombragris@sombragris.org> 1.6.2b-1mdk
changelog:
  - 1.6.2b
  - Built on MDK 9.0 and qt 3.1
  - Spec file reworked to take account of differences with Cooker packages
  - Thanks to Bryan for his help in building this package!


author: Etienne Faure <etienne@mandrakesoft.com> 0.94-1mdk
changelog:
  - updated from Thomas Leclerc <leclerc@linux-mandrake.com> 0.94-1mdk
  	- version 0.94
  	- add menu entry


author: Preston Brown <pbrown@redhat.com>
changelog:
  - patch to fix null ptr dereference
  - added -ansi flag; fixes efix problem (produced bad tiff files)


author: Alexander Larsson <alexl@redhat.com> - 2.8.1-1
changelog:
  - update to 2.8.1
  - Add fixes patch to fix some small details
  - Add asserts patch to not assert if mmc profiling fails (#132479, #132645)
  - Add patch that makes n-c-b use hal to get media type
  - Enable hal support


author: Paul Howarth <paul@city-fan.org> - 0.02-2
changelog:
  - Add Changes as %doc
  - Fix directory ownership
  - Remove redundant BR: perl
  - Simplify compiler optimization
  - Tidy up %description


author: Christopher Stone <chris.stone@gmail.com> 1.3.9-3
changelog:
  - Build with %{optflags} (bug #225096)
  - Remove system macros from spec
  - Use $RPM_BUILD_ROOT instead of %{buildroot}


author: Matthias Saou <http://freshrpms.net/> 0.94.14-0.1.rc21
changelog:
  - Update to 0.94.14rc21.
  - Change release tag "order" to comply with guidelines (extra info at the end).
  - Change _initrddir (which I still see as plain wrong) to /etc/rc.d/init.d.
  - Replace freshrpms logo with fedora one.
  - Change flashy green from the default index.html to plain white.
  - Minor spec file cosmetic changes.


author: Matthias Saou <http://freshrpms.net/> 5.1.6_0.9.5-0.4.rc1
changelog:
  - Rebuild for PHP 5.1.6, eA still checks the exact PHP version it seems :-(
  - Put "Requires: php = %{php_version}" back to avoid broken setups if/when
    PHP gets updated.


author: Matthias Saou <http://freshrpms.net/> 5.1.4_0.9.5-0.3.rc1
changelog:
  - Update to 0.9.5-rc1.
  - Enable shared-memory, sessions and content-caching (#201319).
  - Remove both patches of fixes, merged upstream.
  - Change from creating a full eaccelerator.ini to using the included one with
    path substitutions and a patch to change default values.


author: Matthias Saou <http://freshrpms.net/> 5.1.x_0.9.5-0.2.beta2
changelog:
  - Rework heavily the API version requirement detection, should work with
    chroots builds where PHP isn't installed outside.
  - Replace the CC way of getting the API version with php -i output.


author: Matthias Saou <http://freshrpms.net/> 5.1.x_0.9.3-0.1
changelog:
  - Update to 5.1.x compatible snapshot.
  - Will try to make re2c available in Extras in order to build require it.


author: Matthias Saou <http://freshrpms.net/> 4.x.x_0.9.3-4
changelog:
  - Re-add %{?_smp_mflags}, as this was a false alarm.
  - Force SEM to FCNTL as the IPC version is buggy on x86_64 SMP at least.


author: Matthias Saou <http://freshrpms.net/> 4.x.x_0.9.3-3
changelog:
  - Include buffer overflow patch from zoeloelip, this should fix the real
    problem that wasn't in fact solved with the removal of _smp_mflags.
  - Add explicit shm_and_disk defaults to the ini file.


author: Brian Pepple <bdpepple@ameritech.net> - 1.20-1.fc4
changelog:
  - Rebuild for Python 2.4.
  - Update to 1.20.
  - Switch to the new python macros for python-abi
  - Add dist tag.


author: Tim Jackson <rpm@timj.co.uk> 20060725-1
changelog:
  - Update to 2006-07-25 version
  - Own defaultdocdir/php-manual
  - Macro change: datadir/docs -> defaultdocdir
  - Rename License tag to stop rpmlint whinging


author: Tim Jackson <rpm@timj.co.uk> 20060527-2
changelog:
  - Update Source to an absolute URL
  - Provide php-manual-en-us (in case of a future split into en-gb etc.)


author: Karsten Hopp <karsten@redhat.com> 1.06-24
changelog:
  - fix buildroot
  - remove trailing dot from summary
  - fix post/preun requirements
  - use make install DESTDIR=...
  - convert changelog to utf-8
  - use smp flags
  - use 'flex -I' instead 'flex -I8' (not supported anymore)
  - run autofoo stuff to update files for current automake


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fixed bug 7145 (long commands -> coredump) 
  - removed explicit stripping, it does this by itself anyway
  - gzipped man-pages


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1:0.95-8
changelog:
  - Upgrade to upstream bugfix release 0.95-1
  - Drop upstreamed ungroup and formatstring patches
  - Add a patch for python-2.5 support
  - Fix exit due to sigpipe when entering an invalid print command (bz 229101)


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1:0.95-4
changelog:
  - Add a patch from upstream which fixes a crash when ungrouping
    multiple selected groups at once (bz 194149):
    http://bugzilla.gnome.org/show_bug.cgi?id=334771


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1:0.95-1
changelog:
  - New upstream version 0.95 (final)
  - Cleanup spec even more, correctly install the desktop file and icons,
    drop unneeded scrollkeeper-update in scripts (bz 189756)


author: Hans de Goede <j.w.r.degoede@hhs.nl> 1:0.95-0.pre7.1
changelog:
  - Taking over as FE maintainer (bz 185886)
  - Cleanup spec to match FE packaging guidelines
  - Bump to upstream 0.95-pre7 (bz 184548)
  - Enable python plugin


author: Alexander Larsson <alexl@redhat.com> 1:0.91-1
changelog:
  - Update to 0.91
  - Remove printing patch, it doesn't nearly apply yet, and might
    not be needed since dia is all utf8:y now.


author: Alexander Larsson <alexl@redhat.com>
changelog:
  - Updated from upstream (0.88.1)
  - Removed source1 (ja.po) since it was in upstream
  - Disabled patch1 since it breaks 8bit non-multibyte locales.
  - Updated patch 3


author: Akira TAGOH <tagoh@redhat.com>
changelog:
  - -2
  - Fixed install po.
  - Updated Japanese translation.
    Note: Please remove Source1: when release the next upstream version.
  - Added Japanese patch.
  - -3
  - Fixed text render bug.


author: Adam Jackson <ajax@redhat.com> 1.0.2-3
changelog:
  - From OLPC: jam -DHAVE_STRCASECMP into CFLAGS to make xkbcomp (and therefore
    X server startup) slightly less painfully slow.


author: Mike A. Harris <mharris@redhat.com> 1.0.2-2
changelog:
  - Added xkbutils_version macro, which can be used in the Version field
    in the future, to help prevent accidental bumping of the package version.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all apps to version 1.0.0 from X11R7 RC4.
  - Changed manpage dir from man1x to man1 to match upstream default.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - Change from "Conflicts" to "Obsoletes: XFree86, xorg-x11" for upgrades.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Updated to xkbutils-0.99.1, setxkbmap-0.99.2, xkbcomp-0.99.1, xkbevd-0.99.2,
    xkbprint-0.99.1 from X11R7 RC2.


author: Mike A. Harris <mharris@redhat.com> 0.99.0-3
changelog:
  - Updated xkbutils to version 0.99.0 from X11R7 RC1.  The upstream tarball
    changed, but the version stayed the same.  <sigh>
  - Updated setxkbmap, xkbcomp, xkbevd, xkbprint.
  - Change manpage location to 'man1x' in file manifest.
  - Iterate over packages with for loop instead of serialized code duplication.


author: Sean Reifschneider <jafo-rpms@tummy.com>
changelog:
  [Release 2.5-1]
  - Updated for the 2.5 release.
  - Making the "clean" mechanisms safer in the .spec file.


author: Aurelien Bompard <gauret[AT]free.fr> 0.5.0-2
changelog:
  - own the doc dir
  - use hicolor instead of crystalsvg as icon theme
  - add extension to the icon in the desktop file


author: Matthias Saou <http://freshrpms.net/> 2.4.9.6-1
changelog:
  - Update to 2.4.9.6.
  - Rebuild against python 2.5 on devel (FC7) branch.
  - Remove no longer needed 64bit fix patch and autotools build requirements.


author: Matthias Saou <http://freshrpms.net/> 2.4.9.5-3
changelog:
  - FC6 rebuild.
  - Remove gcc-c++ build requirement, it's a default.
  - Require exact release in the devel sub-package.


author: Matthias Saou <http://freshrpms.net/> 2.4.9.3-8
changelog:
  - Move libraries back to _libdir (why lib32dir in the first place?) (#158586)
  - Move python module into site-packages/.
  - Disable stripping of the lib and the python module lib.


author: Matthias Saou <http://freshrpms.net/> 2.4.9.3-3
changelog:
  - Add explicit dependency on tcl, as the bindings are in a directory created by
    this package, whereas the tcl package creates symlinks instead (clash).


author: Christoph Wickert <fedora at christoph-wickert de> 0.97-7
changelog:
  - Mass rebuild for Fedora Core 6.
  - Update epiphany-patch for epiphany <= 2.1.6.
  - disable-static instead of removing .a files.
  - BuildRequire intltool instead of perl(XML::Parser).


author: Christoph Wickert <fedora at christoph-wickert de> 0.97-6
changelog:
  - Fix BR to build in minimal build environment (#198919).
  - Add patch to build against epiphany 2.1.5.


author: Christoph Wickert <fedora wickert at arcor de> 0.97-4
changelog:
  - fix %defattr.
  - fix summary and description of epiphany-extension subpackage.
  - fix BR of epiphany-extension subpackage.


author: Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> 0.96-2
changelog:
  - Remove the epiphanye build-option and build it always
  - Use epimajor macro to simplify spec for different dists
  - make install DESTDIR= instead of makeinstall macro


author: Adel Gadllah <adel.gadllah [AT] gmail [DOT] com> 0.96-1
changelog:
  - Update to 0.96 
  - Fix urls in spec file (project has moved)
  - dropped x86_64 patch (not needed anymore)


author: Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> 0:0.14-0.fdr.2
changelog:
  - Source changed to something downloadable with wget
  - Fixed devel description
  - use desktop-file-utils


author: Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> 0.13-0.fdr.1
changelog:
  - New Spec file based on impressions from gwget-0.13.1-5asp with
    work from various people:
    Pavlo Bohmat <bohm@ukr.net>
    Arkady L. Shane <shejn@msiu.ru>
    Abel Cheung <deaddog@deaddog.org>
    Lenny Cartier <lenny@mandrakesoft.com>
    Michael Scherer <scherer.michael@free.fr>
    Laurent MONTEL <lmontel@mandrakesoft.com>


author: Chris Weyl <cweyl@alumni.drew.edu> 2.0-5
changelog:
  - disable tests which will fail under mock
  - remove execute bits from files which shouldn't have them
  - include additional buildreq of perl(Time::Timezone)
  - also include perl(Time::Timezone) as a requires, as it provides optional
    functionality and is not picked up by the autoreq/prov scripts.


author: Michał Bentkowski <mr.ecik at gmail.com> - 1.5.1-5
changelog:
  - Some fixes in preamble.
  - Change name from mutagen to python-mutagen.
  - Delete CFLAGS declaration.


author: Michał Bentkowski <mr.ecik at gmail.com> - 1.5.1-3
changelog:
  - Remove python-abi dependency.
  - Prep section deletes first two lines in __init__.py file due to rpmlint error.


author: Steven Pritchard <steve@kspei.com> 0.093-1
changelog:
  - Specfile autogenerated by cpanspec 1.64.
  - Improve description.
  - Fix License.
  - Remove explicit dependency on Test::Tester and Test::NoWarnings.


author: Christian Iseli <Christian.Iseli@licr.org> 4.99.7-1
changelog:
  - new upstream version
   - use new Makefile's install
   - remove Prefix tag (useless according to rpmlint)


author: Jens Petersen <petersen@redhat.com> - 0.16.1-8
changelog:
  - add gettext-php-prinf-output-237241.patch to workaround php test failure
    (#237241)
  - add gettext-php-headers.patch to correct php test headers
    (Robert Scheck, #232832)


author: Jens Petersen <petersen@redhat.com> - 0.16.1-7
changelog:
  - set preloadable_libintl.so executable in %install so it gets stripped
  - force removal of infodir/dir since it is not there when /sbin is not in path


author: Jens Petersen <petersen@redhat.com> - 0.16.1-6
changelog:
  - add buildjar switch for building of libintl.jar
  - lots of spec file cleanup (Mamoru Tasaka, #225791):
  - preserve timestamps of installed files
  - disable building of static library
  - use %find_lang for .mo files
  - remove examples from -devel package
  - do not own en@*quot locale dirs
  - set preloadable_libintl.so executable
  - add ChangeLog to -devel package
  - add %check to run make check
  - add gettext-tools-tests-lang-gawk-fail.patch to work around gawk test failure


author: Jens Petersen <petersen@redhat.com> - 0.16.1-4
changelog:
  - protect install-info in devel %post and %preun too (Ville Skyttä, #223689)
  - forward port fix to reset of timestamp of examples ChangeLog for
    brp-java-repack-jars libintl.jar multilib conflict (#205207)


author: Jens Petersen <petersen@redhat.com> - 0.14.6-1
changelog:
  - update to 0.14.6
  - include preloadable_libintl.so again (Roozbeh Pournader, #149809)
  - remove .la files (Kjartan Maraas, #172624)
  - cleanup spec file


author: Leon Ho <llch@redhat.com>
changelog:
  - updated to 0.14.3
  - fixed compiling problem on gcc4 (#150992)
  - fixed Group for -devel (#138303)
  - moved gettextize and autopoint to -devel (#137542, #145768)
  - moved some of the man pages


author: Leon Ho <llch@redhat.com>
changelog:
  - move java stuff to gettext-devel (#132239)
  - add BuildRequires: gcc-c++ (#132518)
  - add some missing install-info and ldconfig (#131272)
  - fix dir ownership (#133696)
  - run autotools for 1.9


author: Leon Ho <llch@redhat.com>
changelog:
  - use --without-included-gettext to avoid the need of libintl.so (#125497)
  - remove preloadable_libintl.so


author: Leon Ho <llch@redhat.com>
changelog:
  - packaged lib files for devel
  - moved some of the files to different sub-pkg
  - fix problem on x86_64 build


author: Trond Eivind Glomsrød <teg@redhat.com> 0.10.40-1
changelog:
  - 0.10.40 - libintl is now LGPLed (it was GPLed). Note that RHL
    uses the glibc version, and don't include libintl from gettext.
  - include new man pages
  - don't include the elisp mode - bundle it into the main emacs package,
    like we do for XEmacs.
  - README-alpha no longer exists, so don't list it as a doc file


author: Trond Eivind Glomsrød <teg@redhat.com> 0.10.38-6
changelog:
  - Fix handling of multiline entries (rest of #50065)
  - don't use the references of the last entry in a po file
  - remove duplicates when inverting
  - Own the en@quot and en@boldquot locale dirs (#52164)
  - Handle entries with a first line of "" as identical to those
    without


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.19-1
changelog:
  - Update to 1.19 (broken: cpan tickets: #18020 and #18147).
  - Module::Install 0.58 is broken (Image-Info-1.19-inc-Module-Install.pm.patch).
  - BR: perl(Image::Xbm), perl(Image::Xpm), perl(XML::Simple).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 1.18-1
changelog:
  - Update to 1.18 (broken: cpan ticket #6558).
  - Dropped patches Image-Info-1.16-X[BP]M.pm.patch (accepted upstream).
  - Dropped patch Image-Info-1.16-string.t.patch (test has been rewritten).


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0:1.16-0.fdr.3
changelog:
  - Reverted Image::Xbm and Image::Xpm patches.
  - Patched Image::Info::XBM.pm and Image::Info::XPM.pm instead.


author: Kristian Høgsberg <krh@redhat.com> - 2.17.90.1-3
changelog:
  - Update gnome-session-2.15.90-window-manager.patch to start
    gtk-window-decorator instead of gnome-window-decorator for compiz.

    [ Update: the patch is not applied and upstream gnome-session does
      the right thing. ]


author: Ray Strode <rstrode@redhat.com> - 2.16.1-2.fc7
changelog:
  - don't hose users with a stale http_proxy variable if they
    use autoconfiguration and uses to use manual configuration.
    Patch by Mark McLoughlin (bug 212319)


author: Soren Sandmann <sandmann@redhat.com> - 2.15.4-3
changelog:
  - Add patch to (a) add configuration option for window manager, (b) start the window
    manager, and (c) disable splash screen by default.


author: Ray Strode <rstrode@redhat.com> - 2.13.92-3
changelog:
  - Patch from Vincent Untz to fix session editing (upstream bug 333641)
  - Desensitize buttons for operations that the user isn't allowed
    to do (bug 179479).


author: Ray Strode <rstrode@redhat.com> - 2.12.0-3
changelog:
  - fix up the dummy client ids to match the id passed initially
    passed to the programs in the default session 
    (broke in last update).


author: Ray Strode <rstrode@redhat.com> 2.8.0-6
changelog:
  - Rebuild for devel branch

   * Tue Nov 02 2004 Ray Strode <rstrode@redhat.com> 2.8.0-5
  - Convert Tamil translation to UTF8 
    (Patch from Lawrence Lim <llim@redhat.com>, bug 135351)


author: Ray Strode <rstrode@redhat.com> 2.8.0-4
changelog:
  - Add g-v-m to default session since it wasn't already (?).
  - Remove g-v-m from default session on s390


author: Ray Strode <rstrode@redhat.com> 2.7.91-2
changelog:
  - Fix from Federico for infamous hanging splash screen problem.
    (http://bugzilla.gnome.org/show_bug.cgi?id=151664)


author: Ray Strode <rstrode@redhat.com> 2.7.4-3
changelog:
  - Change folder name from "autostart" to more aptly named
    "session-upgrades" from suggestion by Colin Walters.
  - put non-upstream gconf key in rh_extensions


author: Ray Strode <rstrode@redhat.com> 2.6.0-4
changelog:
  - Use desktop-file-install instead of patching 
    session-properties.desktop.  Add X-Red-Hat-Base category.


author: Mark McLoughlin <markmc@redhat.com> 2.5.90-1
changelog:
  - Update to 2.5.90
  - Remove extraneous fontconfig BuildRequires
  - Resolve conflicts with the icons and splash-repaint patches


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.1.90
  - drop purgedelay patch, as it was increased upstream (though only to 2 minutes instead of 5)


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Up purge delay for session manager to 5 minutes to avoid problem 
    with openoffice.org timing out


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put gdm session in here, conflict with old gdm
  - use DITHER_MAX for dithering to make splash screen look good in 16
    bit


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put in new default session with pam-panel-icon
  - disable schema install in make install, fixes rebuild failure.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.1.0-1
changelog:
  - Initial build for Fedora Extras.
  - Add patches for no-strip, preferences-segfault, cflags, libdir.


author: John Berninger <johnw at berningeronline dot net> - 1.4.0-1
changelog:
  - Bumped to 1.4.0-1 from 1.3.0-2
  - Conditional BuildRequires for FC4-- versus FC5++
  - Various fixes per bugzilla review


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.4-0.2.pre10
changelog:
  - various specfile improvements from review (bz 228707)
  - install (do not remove after make install) kobosfx.h, its not a stray header
    file it actually gets loaded runtime by the game


author: Akira TAGOH <tagoh@redhat.com> 0.5.1-12
changelog:
  - rebuilt against the latest openssl.
  - gc6.2-fix-prelink.patch: removed.
  - w3m-fix-vi-prec-num.patch: applied to get the vi-like prefix working.


author: Akira TAGOH <tagoh@redhat.com> - 0.5.1-7
changelog:
  - rebuilt
  - w3m-0.5.1-gcc4.patch: applied to fix the build fails with gcc4.
    (#151136: Robert Scheck)


author: Akira TAGOH <tagoh@redhat.com> - 0.5.1-5
changelog:
  - updates to gc6.3. (#143361)
    - w3m-0.3.1-fixptr_t.patch: removed. it's no longer needed.
  - fixed the permission to get working of the helper scripts.


author: Akira TAGOH <tagoh@redhat.com> 0.5-2
changelog:
  - separated w3mimgdisplay to w3m-img package. (#120600)
  - removed indexhtml, which is no longer refered.


author: Akira TAGOH <tagoh@redhat.com> 0.5-1
changelog:
  - New upstream release.
  - w3m-0.2.3.1-ipv6.patch: removed.
  - w3m-0.4.1-stable-m17n-20030308.patch.gz: removed, because it has been marged to the upstream.
  - w3mconfig: updated.
  - w3mbookmark: removed, use one, which the upstream disbributed.
  - w3mhelperpanel: likewise.
  - libwc-latest.tar.gz: likewise.
  - w3m-wrapper: removed.
  - w3m-0.5-guess_display_locale.patch: updated.
  - w3m-0.5-staic-libgc.patch: applied to build static library of libgc.
  - w3m-0.3.2-lib64path.patch: removed.


author: Akira TAGOH <tagoh@redhat.com> 0.4.1-10
changelog:
  - gc6.2alpha5-ppc64.patch: removed because no need to apply.
  - gc6.2.tar.gz: update to the stable version.
  - gc6.2-fix-prelink.patch: applied to fix prelink issue. (#115201: Jakub Jelinek)


author: Akira TAGOH <tagoh@redhat.com> 0.4.1-9
changelog:
  - w3m-0.4.1-guess_display_locale.patch: applied to guess the display encoding
    from the current locale. (#111217)


author: Akira TAGOH <tagoh@redhat.com> 0.4.1-1
changelog:
  - New upstream release.
  - w3m-0.3.2.2-fixhttpssegv.patch: removed.
  - w3m-0.3.2-fix64arch.patch: removed.


author: Akira TAGOH <tagoh@redhat.com> 0.3.2.2-5
changelog:
  - w3m-0.3.2.2-fixhttpssegv.patch: applied to fix a segfault with https. (#83263)
  - gc6.2alpha3.tar.gz: use it to be built on s390x.


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - buildreq openssl-devel instead of openssl
  - use openssl's pkg-config configuration if it exists
  - pass cflags and ldflags in to configure instead of letting them get pulled
    in from the environment


author: Akira TAGOH <tagoh@redhat.com> 0.3.2.2-2
changelog:
  - add indexhtml to BuildRequires.
  - fix the wrong path to the local CGI.
  - don't use rpms internal dep generator.
  - w3m-wrapper: go through the options.


author: Akira TAGOH <tagoh@redhat.com> 0.3.2-1
changelog:
  - New upstream release.
  - removed some packages, because this release contains it.
    - w3m-0.3.1-fixanchor.patch
    - w3m-0.3.1-multipartimg.patch
    - w3m-0.3.1-fixwarning-03276.patch
  - w3mimgsize is obsolete.
  - gc6.1.tar.gz: update to the latest gc library.
  - w3m-0.3.2-fix64arch.patch: applied to fix the build issue for ia64 and x86_64.
  - w3m-0.3.2-lib64path.patch: applied to add lib64 path for x86_64.


author: Akira TAGOH <tagoh@redhat.com> 0.3.1-3
changelog:
  - use 'display' to show the image when nothing is described in mailcap.
  - w3m-0.3.1-fixanchor.patch: applied to fix an anchor issue on plain text.
  - w3m-0.3.1-multipartimg.patch: applied to fix a rendering issue on multipart.
  - w3m-0.3.1-fixwarning-03276.patch: applied to fix a warning message at buld
    time.


author: Akira TAGOH <tagoh@redhat.com> 0.3.1-1
changelog:
  - New upstream release.
  - w3m-0.3.1-fixprivsym.patch: disabled. it works without this patch.
  - w3m-0.3.1-fixptr_t.patch: applied to fix the build issue for alpha.
  - gc6.1alpha2.tar.bz2: use an old version to avoid the build issue for IA64.


author: Akira TAGOH <tagoh@redhat.com> 0.3-1
changelog:
  - New upstream release.
  - w3m-0.3-config.param-{en,ja}: update.
  - w3m-0.3-fixprivsym.patch: Fixed unresolved dependencies. (Bug#60725)
    Thanks Jakub.
  - fix the missing files.


author: Akira TAGOH <tagoh@redhat.com> 0.2.4-2
changelog:
  - Fixed use a wrong build config for en. (Bug#58093)
  - Update build config files for 0.2.4
  - Added cert path to default config.


author: SATO Satoru <ssato@redhat.com> - 0.2.1-11
changelog:
  - made the relative link to HTML_HOME instead of the absolute one
  - fixed the permission of sources (to shut up rpmlint)


author: SATO Satoru <ssato@redhat.com> - 0.2.1-9
changelog:
  - corrected the help files' path (#51197)
  - removed /etc/profile.d/*
  - fixed and update the wrapper
  - removed imlib-devel (BuildRequires:)


author: SATO Satoru <ssato@redhat.com>
changelog:
  - s/Copyright/License/
  - %files: add '/etc/profile.d/w3m.*'
  - enable IPv6 support by default (#35649)


author: SATO Satoru <ssato@redhat.com>
changelog:
  - not to use upstream configure script (it looks corrupted)
  - separated w3m-ja/w3m-en (#26443)
  - apply many security bug fix patch
  - ExludeArch alpha
  - use bzip2 instead of gzip for src/patches


author: Lisa Sagami <czs14350@nifty.ne.jp>
changelog:
  - Provides: webclient, Requires: indexhtml (capability of lynx)
  - added w3m.wmconfig
  - give them(who?) RPM_OPT_FLAGS(what?)
  - dont include duplicated man pages and CVS directory in doc


author: Steve Dickson <steved@redhat.com> 0.4-3
changelog:
  - Updated init.d script to look for cachefilesd in /sbin
  - Added postun and preun rules so cachefilesd is stopped
    and started when the rpm is updated or removed.


author: Steve Dickson <steved@redhat.com> 0.2-1
changelog:
  - Made the daemon 64-bit application.
  - Changed the syslog logging to log the daemon's PID
  - Changed OS error logging to log errno number as well the string


author: Daniel P. Berrange <berrange@redhat.com> - 0.103.0-3.fc7
changelog:
  - Fixed module import when using --accelerate
  - Fixed detection of RHEL5 client distro
  - Fixed default 'network's selection & default URI choice to
    not be Xen specific
  - Fixed features XML when using initrd for fullvirt


author: Daniel P. Berrange <berrange@redhat.com> - 0.103.0-1.fc7
changelog:
  - Updated to 0.103.0 release
  - More validation of UUIDs
  - Automatically reboot Windows guests with CDROM still attached
  - Allow '-'  in guest names
  - Adjust way distro detection is done


author: Daniel P. Berrange <berrange@redhat.com> - 0.100.0-1.fc7
changelog:
  - Updated to 0.100.0 which now uses libvirt inactive domain support
    needed to operate correctly against xen 3.0.4


author: Daniel P. Berrange <berrange@redhat.com> - 0.98.0-3.fc7
changelog:
  - don't traceback on invalid memory param (gcosta, #219270)
  - let the console come back quicker to help with HVM installs (#212024)


author: Jeremy Katz <katzj@redhat.com> - 0.96.0-1
changelog:
  - improve check for if a machine is hvm capable to catch when support isn't
    allowed by the bios (#211276)
  - cleanup after nfs mount failure on pv install (#206196)
  - support for setting vcpus (#210516)


author: Jeremy Katz <katzj@redhat.com> - 0.94.0-1
changelog:
  - Fix using block device as backing (#209138)
  - Fix error handling for invalid install locations (danpb)
  - Write out vcpu config (danpb)


author: Jeremy Katz <katzj@redhat.com> - 0.93.0-1
changelog:
  - Fix hvm network xm config (danpb)
  - Enable PAE with pae hvm hosts (danpb)
  - Fix hvm block backed cds (danpb)
  - Fix handling of block devs backed by vbds (danpb)
  - Ensure we're on a xen kernel (#205889)
  - Default to vncunused


author: Jeremy Katz <katzj@redhat.com> - 0.92.0-1
changelog:
  - Fix silly loop when asking about graphics support (misa)
  - Fix passing macaddr
  - Add support so that we reboot into the guest after installation finishes


author: Matthias Saou <http://freshrpms.net/> 2.0-1
changelog:
  - Update to 2.0.
  - Remove now included APE tag patch.
  - Chmod -x all files, then +x only where needed, since nearly all are +x :-(


author: Matthias Saou <http://freshrpms.net/> 1.99.13-1
changelog:
  - Update to 1.99.13.
  - Update id3lib patch to still apply.
  - Switch away from %makeinstall to DESTDIR method.


author: Matthias Saou <http://freshrpms.net/> 1.99.12-2
changelog:
  - Now use "patched" tarball with the libmpg123 directory removed.
  - Include patch to disable libmpg123 and use id3lib instead for mpeg headers.


author: Matthias Saou <http://freshrpms.net/>
changelog:
  - Rebuilt for Red Hat Linux 8.0.
  - New menu entry.
  - Rebuild with flac support... nope, doesn't compile :-(


author: Konstantin Ryabitsev <icon@fedoraproject.org> - 0.16.1-1
changelog:
  - Renaming package python-logilab-astng from python-astng. Should have done
    a while ago.
  - Upstream version 0.16.1


author: Karel Zak <kzak@redhat.com> 3.2.7-11
changelog:
  - fix #234546 - 'w' doesn't give correct information about what's being run.
  - fix #228870 - process `sysctl' is using deprecated sysctl
  - cleanup spec file


author: Karel Zak <kzak@redhat.com> 3.2.7-10
changelog:
  - fix #212637 - sysctl using deprecated syscall
  - fix #140975 - top corrupts screen when sorting on first column


author: Karel Zak <kzak@redhat.com> 3.2.7-8
changelog:
  - remove zombie patch (needs more investigation)
  - fix #208100 - top command with '-c' option become not to display list of tasks
  - fix #199174 - top returns with exit code 1 even if no error occurs


author: Karel Zak <kzak@redhat.com> 3.2.6-4
changelog:
  - fix #191493 - watch -n doesn't handle large integers properly
  - fix #186017 - top "Cpu0" line never updates on single processor machine
                  (bugfix added to the 'remcpu' patch)
  - fix #168444 - memory usage conflicts with /proc/meminfo
  - fix #174619 - top reports wrong values for CPU(s) in batch mode
  - fix #185299 - cpu steal time support


author: Karel Zak <kzak@redhat.com> 3.2.5-7
changelog:
  - improve procps-3.2.5-sysctl-writeonly.patch
  - fix #161449 - "top" ignores user and system toprc
  - fix #161559 - top segfaults when resizing console
  - fix #160796 - vmstat crashes when accessing LVM partition
  - fix #161303 - 'top' failed when remove cpus


author: Karel Zak <kzak@redhat.com> 3.2.5-4
changelog:
  - fix #144459 - sysctl reports error: unknown error <...> reading key '<key>'
    (now sysctl doesn't read data from write-only /proc/sys files)


author: Karel Zak <kzak@redhat.com> 3.2.5-1
changelog:
  - update to new upstream 3.2.5
  - recreate selinux patch
  - remove errno, slabinfo21 and fullpath patches -- all fixed by upstream


author: Karel Zak <kzak@redhat.com> 3.2.3-6
changelog:
  - update FAQ
  - update spec description
  - fix text in .noproc patch
  - fix segv fault if cpu number exceeding 38 (#137159)


author: Alan Cox <alan@redhat.com> 3.2.1-6
changelog:
  - Removed broken SELinux patch to w
  - Added a better alternative whereby we get less data but don't fall for
    vanished processes when SELinux is running


author: Colin Walters <walters@redhat.com> 3.2.1-4
changelog:
  - Add little patch to make w/who work when getattr access
    to /proc/<pid> for the user's login process is denied


author: Alexander Larsson <alexl@redhat.com> 2.0.7-24
changelog:
  - Fix saving of sort, fixes #32757
  - Fix printing size, fixes #48224
  - Fix float decimal point input #58163


author: Alexander Larsson <alexl@redhat.com> 2.0.7-23
changelog:
  - Fix unsigned/signed bug. Closes #60998.
  - Update threadbadhack to correctly propagate process time to the main thread.


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - procps-2.0.7
  - integrated all patches except for signames patch, which is broken
    and unnecessary
  - See NEWS for changes between 2.0.6 and 2.0.7
  - Added patch to correctly install desktop file.  Oops.


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - don't try to load System.map (and spit error messages if it does not
    exist) if ps or top are not going to use it, both to speed things up
    and remove the ugly messages when they don't make sense.
  - in top, print the possible error messages using standard top SHOWMESSAGE
    (because it will be now printed out when already in terminal mode).


author: Paul Howarth <paul@city-fan.org> 1.30-3
changelog:
  - Skip test 03-packet, which can sometimes hang (cpan rt#6101)
  - Add manual Crypt::Blowfish dep to ensure we have blowfish support


author: Karsten Hopp <karsten@redhat.de> 1.2.0-2
changelog:
  - package all python files. INSTALLED_FILES doesn't contain files created
    by the brp-python-bytecompile script


author: Patrick Macdonald <patrickm@redhat.com> 0.9.1-7
changelog:
  - explicitly define the constants directory in case a more
    restrictive umask is encountered (#74019)


author: Mike Bonnet <mikeb@redhat.com> - 1.1-5
changelog:
  - cleanup koji-utils Requires
  - fix encoding and formatting in email notifications
  - expand archlist based on ExclusiveArch/BuildArchs
  - allow import of rpms without srpms
  - commit before linking in prepRepo to release db locks
  - remove exec bit from kojid logs and uploaded files (patch by Enrico Scholz)


author: Mike Bonnet <mikeb@redhat.com> - 1.1-3
changelog:
  - fix typo in BuildNotificationTask (patch provided by Michael Schwendt)
  - add the --changelog param to the buildinfo command
  - always send email notifications to the package builder and package owner
  - improvements to the web UI


author: Jesse Keating <jkeating@redhat.com> 1.1-1
changelog:
  - make the output listPackages() consistent regardless of with_dups
  - prevent large batches of repo deletes from holding up regens
  - allow sorting the host list by arches
  - Add a script to setup Fedora developer's environment


author: Mike Bonnet <mikeb@redhat.com> - 0.9.7-3
changelog:
  - avoid SSL renegotiation
  - improve log file handling in kojid
  - bug fixes in command-line and web UI


author: Mike Bonnet <mikeb@redhat.com> - 0.9.7-2
changelog:
  - enable http access to packages in kojid
  - add Requires: pyOpenSSL
  - building srpms from CVS now works with the Extras CVS structure
  - fixes to the chain-build command
  - bug fixes in the XML-RPC and web interfaces


author: Jesse Keating <jkeating@redhat.com> - 0.9.6-1
changelog:
  - 0.9.6 release, mostly ssl auth stuff
  - use named directories for config stuff
  - remove -3 requires on creatrepo, don't need that specific anymore


author: Jesse Keating <jkeating@redhat.com> - 0.9.5-7
changelog:
  - Move web files from /var/www to /usr/share
  - Use -p in install calls
  - Add rpm-python to requires for koji


author: Jose Pedro Oliveira <jpo at di.uminho.pt> - 0.44-15
changelog:
  - BuildArch correction (noarch). (#155811)
  - Bring up to date with current Fedora.Extras perl spec template.


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 7.19.devo282-9
changelog:
  - Redefine version to include vmrf patch version (devo282)
  - Remove pointless %{pkg} macro
  - Add new pixmaps with better sizing (still ugly though)
  - Renamed the vmrf patch to include the version


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 7.19-8
changelog:
  - Added u-vm-color.el from http://de.geocities.com/ulf_jasper/emacs.html
  - Added vcard support from http://www.splode.com/users/friedman/software/emacs-lisp/
  - Fixed name of info files in pre and post scripts


author: Jonathan G. Underwood <jonathan.underwood@gmail.com> - 7.19-5
changelog:
  - Add patch from http://www.robf.de/Hacking/elisp/ (resolves bug 224501)
  - Ensure CFLAGS="$RPM_OPT_FLAGS" (bug 225101)


author: Jonathan Underwood <jonathan.underwood@gmail.com> - 7.19-1.fc4.jgu
changelog:
  - Initial build
  - Generate vm-mode-init.el
  - Separate out *.el files into -el package
  - Added patch to remove warnings in the decode and encode programs


author: Luke Macken <lmacken@redhat.com> 0.9.9-1
changelog:
  - 0.9.9
  - Rename to python-turbojson
  - Own the %{python_sitelib/turbojson directory
  - Install the EGG-INFO


author: Karsten Hopp <karsten@redhat.de> 0.9.17-1
changelog:
  - update to 0.9.17
  - makefile fixes
  - disable smcinit
  - use manpages from 0.9.17-pre3 as those from 0.9.17 are corrupted


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Make init scripts more i18n friendly (use $0, $prog)
    Bugs #26527 and #26550
  - Exclude S/390 (they don't have the needed hardware)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Get rid of the /etc/modules.conf hack; the entries are in the
    latest modutils by default. (Bug #22799)
  - Require modutils >= 2.3.21-4 to make sure the modules.conf hack
    isn't needed


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add necessary entries to /etc/modules.conf in %post (Bug #19960)
  - Update source URL
  - Fix build with current kernel 2.4 header files


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - make irdadump exit with an error message rather than a segfault when
    run as non-root
  - Update URL


author: Bernhard Rosenkraenzer <bero@redhat.de>
changelog:
  - Add the /etc/irda directory. It's needed.
  - Add the /etc/rc.d/init.d/irda script to start the irda daemon
  - chkconfig'ize /etc/rc.d/init.d/irda


author: Denis Leroy <denis@poolshark.org> - 2.0.3-4
changelog:
  - Rebuild for firefox 2
  - Added explicit gecko version requirement
  - Fixed noreplace rpmlint warning


author: Denis Leroy <denis@poolshark.org> - 2.0.0-2
changelog:
  - Fixed preun script, was removing schemas after update.
  - Removed galeon-config-tool. Now using well-known Fedora scriptlets.
  - Added scripts Requires


author: Denis Leroy <denis@poolshark.org> - 1.3.21-14
changelog:
  - Update to 1.3.21
  - Got rid of requires with rpm -q for ppc build
  - Added dist tag
  - Removed autoreconf patch
  - Added gnome-desktop-devel buildrequires. Added calls to update-desktop-database


author: Thorsten Leemhuis <fedora[AT]leemhuis[DOT]info> - 1.3.20-2
changelog:
  - Add autoreconf-Patch for fix build on x86_64
  - Add distag fc4 so this version is higher than the one for fc3


author: Dams <anvil[AT]livna.org> 0:1.3.9-0.fdr.3
changelog:
  - Include mozapi patch to fix build with mozilla 1.4.1
  - Include mimeicons, mozdetect, and pointer-arithmetics patches from
    CVS (from Nils Philippsen <nphilipp@redhat.com> galeon package)


author: Dams <anvil[AT]livna.org> 0:1.3.9-0.fdr.2
changelog:
  - s/Copyright/License
  - Now using galeon real png for desktop entry (not the bluecurve one..)
  - Using fedora buildroot
  - Hopefully fixed build for mozilla 1.4.1
  - Moved desktop entry install to install section
  - Changed tarball and spec file permissions


author: Dams <anvil[AT]livna.org> 0:1.3.8-0.fdr.2
changelog:
  - Added version in BuildRequires for mozilla-devel
  - scrollkeeper now is Requires(post,postun). Modified scriptlets.


author: Vivek Lakshmanan <vivekl@redhat.com> 0:20011119-7jpp_1fc
changelog:
  - Remove duplicate NVR defines.
  - Conditional native compilation for GCJ.
  - Continuing to use the same version for now since the original package
    version is too big.
  - May need an epoch bump next time to bring it inline with JPP version number.


author: Henri Gomez <hgomez@slib.fr> 20011119-1jpp
changelog:
  - first JPackage release
  - this snapshot came from puretls site, www.rtfm.com, since it fixes problems with puretls


author: Ray Strode <rstrode@redhat.com> 0.8-3
changelog:
  - change to new modular X dependencies
  - move configure to build instead of prep
  - use make install DESTDIR=$RPM_BUILD_ROOT instead of
    
    /usr/bin/make \
  	prefix=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr \
  	exec_prefix=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr \
  	bindir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/bin \
  	sbindir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/sbin \
  	sysconfdir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/etc \
  	datadir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/share \
  	includedir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/include \
  	libdir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/lib \
  	libexecdir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/libexec \
  	localstatedir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/var \
  	sharedstatedir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/com \
  	mandir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/share/man \
  	infodir=/var/tmp/startup-notification-0.9-1.fc7-root-brewbuilder/usr/share/info \
    install


author: Axel Thimm <Axel.Thimm@ATrpms.net> - 4-3
changelog:
  - changed name to fedora-package-config-smart
  - Modify to only include what fedora-release includes for yum.


author: Axel Thimm <Axel.Thimm@ATrpms.net>
changelog:
  - Fork ATrpms-only package, former atrpms-package-config
    package has been renamed to medley-package.config.


author: Chitlesh Goorah <chitlesh@fedoraproject.org> - 0.0.1-6
changelog:
  - Updated Spec file with respect to updated python packaging guidelines
  - Added patch for gresistor.desktop


author: Dawid Gajownik <gajownik[AT]gmail.com> - 0.3.1-4
changelog:
  - Rebuild for FE6
  - Remove ghosting of %{fontdir}/fonts.cache-{1,2} for new fontconfig
  - Update e-mail address


author: Tim Jackson <rpm@timj.co.uk> 1.0.2-1
changelog:
  - Update to 1.0.2
  - Upstream now includes license file (changed to X11)
  - Add en_GB summary/description


author: Jindrich Novy <jnovy@redhat.com> 4.3.29-2
changelog:
  - include also headers for db4-4.2.52
  - sync db4 and compat-db licenses to BSD-style as the result of
    consultation with legal department
  - BuildPreReq -> BuildRequires, rpmlint fixes


author: Jindrich Novy <jnovy@redhat.com> 4.3.29-1
changelog:
  - add 4.3.29 and remove 4.1.25
  - spec reduction diet, remove old unapplied patches
  - apply patches 3-5 with upstream fixes for 4.2.52
  - apply first upstream fix patch for 4.3.29
  - all patches/sources now point to correct URLs
  - ship headers for db-4.3.29


author: Jindrich Novy <jnovy@redhat.com> 4.2.52-5
changelog:
  - package libdb_cxx, which is a dependency for OpenOffice.org-1.x and
    other legacy software (#198130), thanks to Sivasankar Chander
    <siva.chander@gmail.com>


author: Jeff Johnson <jbj@jbj.org> 4.2.52-1
changelog:
  - apply patch.4.1.25.2.
  - retire db-4.2.52 with patch.4.2.52.{1,2} into compat-db.
  - nuke db2 and db-3.3.11.
  - nuke db1 as well.


author: Jeff Johnson <jbj@redhat.com> 4.0.14-3
changelog:
  - compile on all platforms, use gcc296 only on i386/alpha/ia64
  - avoid ppc64 toolchain for the nonce.


author: Nalin Dahyabhai <nalin@redhat.com> 3.3.11-1
changelog:
  - pull in db 3.3, obsolete db3 and db32 in addition to db31
  - build with compat-gcc/compat-gcc-c++ to get C++ shared libraries suitable
    for use in applications built with db3-devel on RHL 7.x
  - pull in db2, obsolete db2/db2-devel/db3-devel, rename to compat-db
  - obsolete db3x


author: Nalin Dahyabhai <nalin@redhat.com> 3.2.9-3
changelog:
  - don't list the tcl include path before other flags when building libdb_tcl
    3.1.x (tcl is in /usr, so this pulls in /usr/include/db.h, which is wrong)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - rename to db31, drop the -devel subpackage, merge the -utils package
  - remove berkeley_db_svc, libdb_tcl.so (conflicts with current -utils)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix URLs in docs for the -utils and -devel subpackages to point to the
    images in the main package's documentation directory (#33328)
  - change Copyright: GPL to License: BSDish


author: - Bastien Nocera <bnocera@redhat.com> - 1.1.3-1
changelog:
  - Update with work from Matthias Clasen <mclasen@redhat.com> up
    to upstream 1.1.3 (#229462)
  - Remove xmmx-flac Obsolete, as we don't ship the xmms plugin


author: Colin Walters <walters@redhat.com> 1.1.0-8
changelog:
  - New patch flac-1.1.0-gnu-stack.patch from Ulrich Drepper to mark asm
    as not requiring an executable stack


author: Warren Togami <wtogami@redhat.com> 1.1.0-4
changelog:
  - #119551 flac-xmms -> xmms-flac to match fedora.us and freshrpms.net
  - Obsoletes flac-libs to upgrade smoothly from fedora.us


author: Martin Bacovsky <mbacovsk@redhat.com> - 2.0.3-1.fc7
changelog:
  - Resolves: #222577 - man page with execute bit
  - Resolves: #223784 - new traceroute breaks scripts
  - Resolves: #223795 - /bin/tcptraceroute symlink occludes alternate tcptraceroute package


author: Robert Scheck <redhat@linuxnetz.de> 1.0.3-3
changelog:
  - enable working IPv6 support in traceroute
  - removed old compatibility links, nothing has SUID/SGID
  - added some documentation files
  - don't expand rpm macros in %changelog


author: Xose Vazquez Perez <xose.vazquez@gmail.com> 1.0.3-2
changelog:
  - license is GPL
  - remove S_ISUID from /bin/traceroute
  - description of this implementation
  - s/$RPM_BUILD_ROOT/%{buildroot}
  - man page needs 0644
  - link it agains relative paths, it works over NFS


author: Phil Knirsch <pknirsch@redhat.com> 1.4a12-20
changelog:
  - Added patch from Jesper Skriver supplied by Kaj J. Niemi to support
    draft-ietf-mpls-icmp-02.txt.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - bugfix for segfault with source routing (#13466)
  - fix bug tracerouting thru aliased ethernet addresses (#9351)


author: Tim Waugh <twaugh@redhat.com> 20000118-4
changelog:
  - New xmltex.tex (from Sebastian).
  - Fmt files should be marked as ghosts so that RPM verification works.


author: PLD Team <pld-list@pld.org.pl>
changelog:
  All persons listed below can be reached at <cvs_login>@pld.org.pl

  $Log: xmltex.spec,v $
  Revision 1.6  2001/03/27 16:50:29  wiget
  add xmltex.cfg file and one missing dir in %files; release 3

  Revision 1.5  2001/03/27 11:10:41  wiget
  include xmltex macros; requires tex/pdftex

  Revision 1.4  2001/01/24 14:18:54  klakier
  - archive file changed

  Revision 1.3  2001/01/24 13:28:40  klakier
  - link fixed

  Revision 1.2  2001/01/24 12:34:27  klakier
  - added Version and more doc

  Revision 1.1  2001/01/24 12:03:51  klakier
  - initial


author: Damien Durand <splinux@fedoraproject.org> - 0.7.5-3
changelog:
  - Fixed mixed-use-of-spaces-and-tabs and /usr/lib/rpm/redhat/find-lang.sh /var/tmp/gdmap-0.7.5-6.fc6-root-mockbuild in changelog
  - added category System and delete-original in desktop-file-install


author: Damien Durand <splinux@fedoraproject.org> - 0.7.5-2
changelog:
  - Fixed Buidrequires, add intltool
  - Fixed locales, add /usr/lib/rpm/redhat/find-lang.sh /var/tmp/gdmap-0.7.5-6.fc6-root-mockbuild GdMap and %files -f GdMap.lang and remove {_datadir}/locales


author: Hans de Goede <j.w.r.degoede@hhs.nl> 0.50-2
changelog:
  - consistent use of %{name} (everywhere).
  - Add BR: libXPM-devel
  - Drop NEWS from %doc as it contains no relevant information.


author: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de> - 0.7.5-3
changelog:
  - initial Fedora package (review #213600)
  - removed the 'X-Fedora' category from the desktop file
  - made __perl_* actions silent


author: Wojciech Kazubski <wk at ire.pw.edu.pl> - 20010722-1
changelog:
  - updated to version 20010722; built on redhat-7.0
  - bulild directory changed, patched for improper rc file location
  - scheme directory added


author: Emmanuel Rouat <emmanuel.rouat at wanadoo.fr>
changelog:
  - added '*' as manpage extension since Mandrake compresss it with
  bzip2 while redhat use gzip
  - rebuilt with latest rpm


author: Emmanuel Rouat <emmanuel.rouat at wanadoo.fr>
changelog:
  - updated %description
  - removed (empty) 'NEWS' file from docs
  - added 'gschem2pcb' executable
  - updated to version 20000704


author: Harald Hoyer <harald@redhat.com> - 0.98a15-4
changelog:
  - added xcdroast-0.98alpha15-linebuffer.patch (Tim Waugh, bz 127658)
  - corrected buildrequires (bz 127300)


author: Nalin Dahyabhai <nalin@redhat.com> 0.98a9-21
changelog:
  - Remove absolute paths from PAM configuration, ensuring that the right set
    of modules gets used regardless of arch on multilib systems.


author: Tim Waugh <twaugh@redhat.com> 0.98a8-5
changelog:
  - Change Copyright: to License:.
  - Change version check for cdrecord to accept 1.10 instead of 1.9.
  - ... and require newer cdrecord.


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - update to 0.98alpha7, which has a new menu to configure non-root mode
  - added README.nonroot, README.atapi to documentation


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to current, this fixes the "crashes on startup" bug (#16055)
    (and the maintainer confirms the "alpha" is more stable than the lastest
    "release").


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - Remove patch for gcc 2.96 breakages, there were none
  - Add patch to make et2c work with recent Tcl/Tk headers


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - get rid of the ExclusiveArch: line; it compiles on sparc and it might
    even work there...
  - Exclude ia64 for now; cdrecord isn't available there.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - rebuild for main distribution
  - fix build with TCL/Tk 8.3
  - remove cdrecord and mkisofs from the package, add
    dependencies on the cdrecord and mkisofs packages instead
  - fix up the code to find cdrecord where it belongs.
  - put man pages in FHS locations
  - fix build with kernel 2.4 headers
  - work around gcc 2.96 breakages


author: Ngo Than <than@redhat.de>
changelog:
  - rebuild for 7.0
  - put man page in correct place
  - fix xcdroast to build with tcltk8.2
  - add cdrecord-1.8 in xcdroast


author: Ville Skyttä <ville.skytta at iki.fi> - 2.14-3
changelog:
  - Filter false positive provides.
  - Include template library, switch to %{_datadir}/tt2.
  - Tune build dependencies for full test suite coverage.
  - Fix and enable GD tests.
  - Include more documentation.
  - Fine tune dir ownerships and file permissions.


author: Ray Strode <rstrode@redhat.com> 0.9-2
changelog:
  - Remove Prereq on gtk.  Prereq's complicate things,
    and the gtk-update-icon-cache is already protected by
    [ -x  ... ]


author: Steve Grubb <sgrubb@redhat.com> - 0.6.6-4.fc7
changelog:
  - Resolves: #236121 increase buffer for context
  - Resolves: #234491 kernel sends ACQUIRES that racoon is not catching
  - Resolves: #218386 labeled ipsec does not work over loopback


